MN102H90M [PANASONIC]
MN102H90M;型号: | MN102H90M |
厂家: | PANASONIC |
描述: | MN102H90M |
文件: | 总3页 (文件大小:304K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MN102H90M
Type
MN102H90M
Mask ROM
384K
Internal ROM type
ROM (byte)
RAM (byte)
20K
Package (Lead-free)
QFP160-P-2828F
Minimum Instruction
Execution Time
83 ns (at 3.0 V to 3.6 V, 12 MHz)
Interrupts
External (6 lines)
Internal (35 lines) : Timer × 10, A/D × 1, OSD × 3, Serial × 6, I²C × 3, Caption × 4, Remote control × 1, Address coincidence × 4,
RTC × 3
Timer Counter
8-bit timer × 10
Watchdog timer : 16-bit × 1
Serial interface
I²C × 3 : for multimaster mode, bus line (output) has 4 systems
Sync serial / I²C (master) / UART × 3
Caption / Teletext Decoder
Built-in sync separator × 2
I/O Pins
I/O
111
Common use
A/D converter
8-bit × 12-ch. (with S/H)
D/A converter
8-bit × 4-ch. (general use or analog R, G, B, α output)
PWM
8-bit × 4-ch.
Special Ports
Remote control reception, digital OSD output
CRTC
3-layer display (graphics, characters, sprites)
Notes
Remote control input discriminant circuit, real time clock, hcounter built-in
Development tools
In-circuit Emulator
PX-ICE102H90-QFP160-P-2828F
MAE00019CEM
MN102H90M
Pin Assignment
TSTMD0
P52, WE
P51, OE
VDD
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
CLH
VREFHS0
CVBS0
AVDD1
CLL
P50, /RST
VSS
VREFHS1
CVBS1
AVSS
PB7, D15
PB6, D14
PB5, D13
PB4, D12
PB3, D11
PB2, D10
PB1, D09
PB0, D08
PA7, D07
PA6, D06
PA5, D05
PA4, D04
VSS
IREF
VREF
COMP
DAROUT, DACOUT0
DAGOUT, DACOUT1
DABOUT, DACOUT2
DAALOUT, DACOUT3
AVDD2
AVSS
P00, SYSCLK
P01, HOUT
P02, AL0
VDD
MN102H90M
PA3, D03
PA2, D02
PA1, D01
PA0, D00
P82, A19
P81, A18
P80, A17
P77, A16
P76, A15
P75, A14
P74, A13
P73, A12
VDD
P03, AL1
P04, AL2
P05, AL3
P06, VCLKOUT
PC0, SCL0A *
PC1, SDA0A *
P07, HSYNC
P10, YM
P11, YS
P12, VSYNC, IRQ1
VSS
OSDXO
OSDXI
VSS
VDD
P72, A11
P71, A10
P70, A09
P67, A08
P84, A21
OSCMD0
P20, R00
P21, R01
P22, R02
P23, R03
P24, R04
VSS
QFP160-P-2828F
Note) : 5 V dielectric N-ch. open drain output pin
*
MAE00019CEM
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd. Industrial Co., Ltd.
相关型号:
MN102HF57K
Microcontroller, 16-Bit, FLASH, 12MHz, CMOS, PQFP84, 18 X 18 MM, PLASTIC, QFP-84
PANASONIC
MN102HF60M
Microcontroller, 16-Bit, FLASH, 34MHz, CMOS, PQFP100, 14 X 14 MM, PLASTIC, LQFP-100
PANASONIC
©2020 ICPDF网 联系我们和版权申明