MS-GXL8-4 [PANASONIC]
Rectangular-shaped Inductive Proximity Sensor;型号: | MS-GXL8-4 |
厂家: | PANASONIC |
描述: | Rectangular-shaped Inductive Proximity Sensor |
文件: | 总16页 (文件大小:990K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amplifier Built-in
Rectangular-shaped Inductive Proximity Sensor
785
GX-F/H SERIES
■General terms and conditions............. F-3
■Glossary of terms........................ P.1576~
■Selection guide............................. P.781~
■General precautions ................... P.1579~
FIBER
SENSORS
Related Information
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
panasonic.net/id/pidsx/global
PNP output
Oil resistant
Different freq.
type available
type available
STATIC
CONTROL
DEVICES
LASER
MARKERS
* Based on research conducted by Panasonic Industrial Devices SUNX
Industry No. 1* in stable sensing as of November 2012 among equivalent rectangular inductive sensors.
PLC
HUMAN MACHINE
INTERFACES
Can be installed with ample space
ENERGY
MANAGEMENT
SOLUTIONS
This sensor has the longest stable sensing range among the same level of rectangular inductive proximity sensors in
the industry. It is easy to install the sensor.
FA COMPONENTS
Stable sensing range
Maximum
operation
distance
Maximum operation distance
Stable sensing range
MACHINE VISION
SYSTEMS
Type
GX-F/H
Conventional
series
model
UV CURING
SYSTEMS
1.6 mm 0.063 in
2.5 mm 0.098 in
4.0 mm 0.157 in
5.0 mm 0.197 in
8.0 mm 0.315 in
0 to 1.3 mm 0.051 in
0 to 2.1 mm 0.083 in
0 to 3.3 mm 0.130 in
0 to 4.2 mm 0.165 in
0 to 6.7 mm 0.264 in
0 to 1.2 mm 0.047 in
0 to 1.8 mm 0.709 in
0 to 3.0 mm 0.118 in
0 to 4.0 mm 0.157 in
0 to 6.4 mm 0.252 in
GX-□6
GX-□8
GX-□12
GX-□15
GX-F/H
series
Conventional
model
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
Other
Products
Long sensing
range
* With standard sensing object
Variation at the maximum operation distance is within ±8 %
Temperature characteristics vary within ±8 %
Thorough adjustment and control of sensing sensitivity
greatly reduces individual sensor differences and
variations.
The work of adjusting sensor positions when using
multiple sensors and when sensors have been replaced
is much easier.
Components such as the sensor coil and core and
product design have been totally revised to provide
excellent temperature characteristics.
Stable sensing can be obtained regardless of the time of
day or the yearly season.
GX-F/H
GXL
GL
GX-M
GX-F/H series
Conventional models
GX-U/GX-FU/
GX-N
Example: GX-□8
16.0
14.0
12.0
0.4 mm 0.016 in or less
GX
Operation distance variation: 0.4 mm 0.016 in or less*
Sensing range within temperatures
of –25 to +70 °C
(–13 to +158 °F) are within
±8 % of the range at +23 °C (+73 °F)
10.0
8.0
6.0
4.0
2.0
For the
Conventional models:
23 °C
73 °F
GX-□8
Standard
sensing object
(
+15
)
within
%
–10
Maximum operation distance: 2.5 mm 0.098 in ± 8 %
60%
0.0
–2.0
less
(2.3 to 2.7 mm 0.091 to 0.106 in)
–20 –10
0
10 20 30 40 50 60 70
1.0 mm 0.039 in or less
Operation distance variation: 1.0 mm 0.039 in or less
–4 14 32 50 68 86 104 122 140 158
Ambient temperature [°C °F]
Standard
sensing
object
Conventional
model
* Typical
Maximum operation distance: 2.5 mm 0.098 in ± 20 %
(2.0 to 3.0 mm 0.079 to 0.118 in)
Image
* Not including temperature characteristics.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
786
APPLICATIONS
FIBER
SENSORS
LASER
SENSORS
Muting control of light curtains
Positioning processing equipment
Positioning metal pallets
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
ENVIRONMENTAL RESISTANCE
SENSOR
OPTIONS
10 times the durability! (Compared to conventional models)
SIMPLE
WIRE-SAVING
UNITS
The new integrated construction method used provides shock resistance of 10,000 m/s2 (approx. 1,000 G in X, Y and Z directions for
three times each), and vibration resistance clears durability tests of between 10 and 500 Hz (3 mm 0.118 in double amplitude in X, Y
and Z directions for 2 hours each). In addition, resistance to impulse noise is approx. three times greater than for conventional models.
WIRE-SAVING
SYSTEMS
Checking up / down
operation of
compact molding
equipment
Sensing presence of metallic
objects on a part feeder
MEASUREMENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PLC
Shock resistance:
1,000 G
HUMAN MACHINE
INTERFACES
Vibration resistance: 500 Hz
ENERGY
MANAGEMENT
SOLUTIONS
FUNCTIONS
Highly resistant to water or oil!
IP68G* protective construction
Indicators are easy to see over a wide field of view
FA COMPONENTS
The new integrated construction method used improves
environmental resistance performance.
The IP68G prevents damage to the sensor by stopping
water and oil getting inside.
A prism with a wide field of view has been developed. This
has greatly improved the visibility of the operation indicators.
GX-H□
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
* For details, refer to the “SPECIFICATIONS (p.790~)”.
Selection
Guide
Amplifier
Built-in
GX-F□
Amplifier-
separated
Other
Products
GX-F/H
GXL
MOUNTING
GL
Tightening strength increased with no damage! (excluding GX-□6)
Conductor thickness doubled to make wiring much easier! (GX-□6 / GX-□8 only)
GX-M
A metal sleeve has been inserted.
It prevents the sensor from being damaged by tightening
too much.
The conductor’s thickness was doubled for the GX-□6 / GX-□8.
This makes it easier to handle and perform crimping work on
the cables. In addition, the tensile strength of the crimping area
has become higher.
GX-U/GX-FU/
GX-N
GX
GX-□8, GX-□12
GX-□15
0.08 mm2
0.15 mm2
Metal sleeve
Conventional model
GX-□6, GX-□8
Metal sleeve
Approx. 1.4 times
greater than before
Conductor thickness approx.
2 times greater
M3 screw
M3 screw
Tightening torque: 0.7 N・m or less
Tightening torque: 1 N・m or less
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
787
FIBER
ORDER GUIDE
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-F6A
AREA
GX-F6AI
SENSORS
6
0.236
24.5
GX-F6B
SAFETY LIGHT
CURTAINS
/
0.965
6 0.236
SAFETY
GX-F6BI
COMPONENTS
NPN open-collector
transistor
PRESSURE /
FLOW
GX-H6A
SENSORS
GX-H6AI
GX-H6B
Maximum
operation distance
INDUCTIVE
PROXIMITY
SENSORS
6
0.236
25
0.984
1.6 mm 0.063 in
PARTICULAR
USE
6
0.236
GX-H6BI
GX-F6A-P
GX-F6AI-P
GX-F6B-P
GX-F6BI-P
GX-H6A-P
GX-H6AI-P
GX-H6B-P
GX-H6BI-P
SENSORS
(0 to 1.3 mm 0 to 0.051 in)
SENSOR
OPTIONS
6
0.236
0.236
SIMPLE
WIRE-SAVING
UNITS
Stable sensing range
24.5
0.965
6
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
6
0.236
0.236
25
0.984
STATIC
CONTROL
DEVICES
6
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
LASER
MARKERS
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
PLC
2) “ I ” in the model No. indicates a different frequency type.
HUMAN
MACHINE
INTERFACES
GX-8 type
ENERGY
MANAGEMENT
SOLUTIONS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
FA
COMPONENTS
GX-F8A
MACHINE
VISION
SYSTEMS
GX-F8AI
7.4 0.291
23
UV
CURING
GX-F8B
SYSTEMS
8 0.315
0.906
GX-F8BI
NPN open-collector
transistor
GX-H8A
GX-H8AI
GX-H8B
Maximum
operation distance
8.2 0.323
8 0.315
Selection
Guide
25
0.984
Amplifier
Built-in
2.5 mm 0.098 in
GX-H8BI
GX-F8A-P
GX-F8AI-P
GX-F8B-P
GX-F8BI-P
GX-H8A-P
GX-H8AI-P
GX-H8B-P
GX-H8BI-P
Amplifier-
separated
(0 to 2.1 mm 0 to 0.083 in)
Other
Products
7.4 0.291
8 0.315
Stable sensing range
23
0.906
GX-F/H
GXL
PNP open-collector
transistor
GL
GX-M
8.2 0.323
8 0.315
25
0.984
GX-U/GX-FU/
GX-N
GX
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
788
ORDER GUIDE
FIBER
SENSORS
LASER
SENSORS
GX-12 type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-F12A
GX-F12AI
GX-F12B
AREA
7.1 0.280
SENSORS
SAFETY LIGHT
27.8
12
1.094
0.472
CURTAINS
SAFETY
/
GX-F12BI
GX-H12A
NPN open-collector
transistor
COMPONENTS
PRESSURE /
FLOW
SENSORS
GX-H12AI
GX-H12B
12 0.472
Maximum
INDUCTIVE
PROXIMITY
SENSORS
operation distance
27.4
1.079
12 0.472
4.0 mm 0.157 in
PARTICULAR
USE
GX-H12BI
GX-F12A-P
GX-F12AI-P
GX-F12B-P
GX-F12BI-P
GX-H12A-P
GX-H12AI-P
GX-H12B-P
GX-H12BI-P
SENSORS
(0 to 3.3 mm 0 to 0.130 in)
SENSOR
OPTIONS
7.1 0.280
Stable sensing range
SIMPLE
WIRE-SAVING
UNITS
27.8
1.094
12
0.472
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
12 0.472
12 0.472
SENSORS
27.4
1.079
STATIC
CONTROL
DEVICES
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
LASER
MARKERS
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
PLC
2) “ I ” in the model No. indicates a different frequency type.
HUMAN
MACHINE
INTERFACES
GX-15 type
ENERGY
MANAGEMENT
SOLUTIONS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
FA
COMPONENTS
GX-F15A
MACHINE
VISION
SYSTEMS
GX-F15AI
GX-F15B
8 0.315
0.591
UV
CURING
SYSTEMS
31.5
1.240
15
GX-F15BI
GX-H15A
NPN open-collector
transistor
16.5 0.650
15 0.591
GX-H15AI
GX-H15B
Maximum
operation distance
Selection
Guide
29.5
1.161
Amplifier
Built-in
5.0 mm 0.197 in
GX-H15BI
GX-F15A-P
GX-F15AI-P
GX-F15B-P
GX-F15BI-P
GX-H15A-P
GX-H15AI-P
GX-H15B-P
GX-H15BI-P
Amplifier-
separated
(0 to 4.2 mm 0 to 0.165 in)
Other
Products
8 0.315
Stable sensing range
31.5
GX-F/H
GXL
1.240
0.591
15
PNP open-collector
transistor
GL
16.5 0.650
15 0.591
GX-M
GX-U/GX-FU/
GX-N
29.5
1.161
GX
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
789
FIBER
ORDER GUIDE
SENSORS
LASER
SENSORS
GX-15 (Long sensing range) type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-FL15A
AREA
GX-FL15AI
GX-FL15B
SENSORS
8 0.315
0.591
SAFETY LIGHT
31.5
CURTAINS
/
1.240
15
SAFETY
GX-FL15BI
GX-HL15A
COMPONENTS
NPN open-collector
transistor
PRESSURE /
FLOW
SENSORS
16.5 0.650
15 0.591
GX-HL15AI
GX-HL15B
Maximum
operation distance
INDUCTIVE
PROXIMITY
SENSORS
29.5
1.161
8.0 mm 0.315 in
(0 to 6.7 mm 0 to 0.264 in)
Stable sensing range
PARTICULAR
USE
GX-HL15BI
GX-FL15A-P
GX-FL15AI-P
GX-FL15B-P
GX-FL15BI-P
GX-HL15A-P
GX-HL15AI-P
GX-HL15B-P
GX-HL15BI-P
SENSORS
SENSOR
OPTIONS
8 0.315
SIMPLE
WIRE-SAVING
UNITS
31.5
1.240
0.591
15
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
16.5 0.650
15 0.591
SENSORS
29.5
1.161
STATIC
CONTROL
DEVICES
LASER
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
MARKERS
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
PLC
HUMAN
MACHINE
5 m 16.404 ft cable length type, bending-resistant cable type
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
5 m 16.404 ft cable length type (standard: 1 m 3.281 ft) and bending-resistant cable (excluding 5 m 16.404 ft cable length type) are
available. However, long sensing range type is not available. When ordering 5 m 16.404 ft cable length type, suffix “-C5” to the model No.
When ordering bending-resistant cable type, suffix “-R” to the model No.
FA
COMPONENTS
(e.g.) 5 m 16.404 ft cable length type of GX-F15AI-P is “GX-F15AI-P-C5”. Bending-resistant cable type of GX-F15AI-P is “GX-F15AI-P-R”.
MACHINE
VISION
OPTIONS
SYSTEMS
UV
CURING
SYSTEMS
Sensor mounting bracket
Designation
Model No.
Description
· MS-GX6-1
Screw is not
attached.
Mounting bracket for GX-6 type (recommended).
Sensors can be mounted closely together for space-saving.
MS-GX6-1
Selection
Guide
Amplifier
· MS-GL6-1
Sensor
mounting
bracket
Mounting brackets for GX-6 type
Sensor mounting brackets for GL-6 can be used. Interchange is
possible.
Built-in
MS-GL6-1
MS-GL6-2
MS-GXL8-4
MS-GXL15
MS-A15F
Screw is not
attached.
Amplifier-
separated
Other
Products
Mounting bracket for GX-8 type
Mounting bracket for GX-15 type
· MS-GL6-2
Screw is not
attached.
GX-F/H
GXL
Mounting example when
mounted onto a steel or
stainless steel plate
For GX-FL15□(-P)
For GX-HL15□(-P)
Aluminum
sheet
· MS-GXL8-4
MS-A15H
1pc. each of M3
GL
(length: 12 mm 0.472 in)
truss head screw, nut,
spring washer and plain
washer is attached.
Mounting sleeve for GX-8 type
GX-M
MS-GX8-1×10
10 pcs. per set
Mounting
sleeve
Screw, nut, bracket of GXL-8 series can be used by inserting
the bracket into the mounting hole of GX-8 type when replacing
3-wire type GXL-8 series (discontinued model) with GX-8 type.
GX-U/GX-FU/
GX-N
GX
· MS-GXL15
Aluminum sheet
· MS-A15F
· MS-A15H
Screw is not
attached.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
790
SPECIFICATIONS
FIBER
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
Type
Front sensing
Top sensing
NPN output
PNP output
ELECTRIC
SENSORS
GX-F6A(I)
GX-H6A(I)
GX-F6B(I)
GX-H6B(I)
GX-F6A(I)-P
GX-H6A(I)-P
GX-F6B(I)-P
GX-H6B(I)-P
MICRO
PHOTO-
ELECTRIC
SENSORS
Item
AREA
CE marking directive compliance
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
EMC Directive, RoHS Directive
SENSORS
1.6 mm 0.063 in ± 8 %
SAFETY LIGHT
CURTAINS
SAFETY
/
0 to 1.3 mm 0 to 0.051 in
COMPONENTS
PRESSURE /
FLOW
Iron sheet 12 × 12 × t 1 mm 0.472 × 0.472 × t 0.039 in
SENSORS
20 % or less of operation distance (with standard sensing object)
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
PARTICULAR
USE
+10
–15
Supply voltage
12 to 24 V DC
Ripple P-P 10 % or less
%
SENSORS
Current consumption
15 mA or less
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
SIMPLE
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
WIRE-SAVING
UNITS
Output
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
DC-12 or DC-13
MEASURE-
MENT
SENSORS
Normally open
Normally closed
Normally open
Normally closed
STATIC
Max. response frequency
Operation indicator
Pollution degree
400 Hz
CONTROL
DEVICES
Orange LED (lights up when the output is ON)
3 (Industrial environment)
LASER
MARKERS
Protection
IP68 (IEC), IP68G (Note 4, 5)
PLC
Ambient temperature
Ambient humidity
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
HUMAN
MACHINE
INTERFACES
ENERGY
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
UV
CURING
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
15 g approx.
Cable extension
Net weight
Selection
Guide
Amplifier
Built-in
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Amplifier-
separated
Other
Products
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
4) Panasonic Industrial Devices SUNX’s IP68 test method
GX-F/H
GXL
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
GL
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
GX-M
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Please check the resistivity of the sensor against the cutting oil you are using beforehand.
GX-U/GX-FU/
GX-N
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
791
FIBER
SPECIFICATIONS
SENSORS
LASER
SENSORS
GX-8 type
PHOTO-
ELECTRIC
SENSORS
Type
Front sensing
Top sensing
NPN output
PNP output
GX-F8A(I)
GX-H8A(I)
GX-F8B(I)
GX-H8B(I)
GX-F8A(I)-P
GX-H8A(I)-P
GX-F8B(I)-P
GX-H8B(I)-P
MICRO
PHOTO-
ELECTRIC
SENSORS
Item
AREA
CE marking directive compliance
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
EMC Directive, RoHS Directive
SENSORS
2.5 mm 0.098 in ± 8 %
SAFETY LIGHT
CURTAINS
/
SAFETY
0 to 2.1 mm 0 to 0.083 in
COMPONENTS
PRESSURE /
FLOW
Iron sheet 15 × 15 × t 1 mm 0.591 × 0.591 × t 0.039 in
SENSORS
20 % or less of operation distance (with standard sensing object)
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
PARTICULAR
USE
+10
–15
Supply voltage
12 to 24 V DC
Ripple P-P 10 % or less
%
SENSORS
Current consumption
15 mA or less
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
SIMPLE
WIRE-SAVING
UNITS
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
Output
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
DC-12 or DC-13
MEASURE-
MENT
Normally open
Normally closed
Normally open
Normally closed
SENSORS
STATIC
CONTROL
DEVICES
Max. response frequency
Operation indicator
Pollution degree
500 Hz
Orange LED (lights up when the output is ON)
3 (Industrial environment)
LASER
MARKERS
Protection
IP68 (IEC), IP68G (Note 4, 5)
PLC
Ambient temperature
Ambient humidity
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
UV
CURING
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Front sensing type: 15 g approx., Top sensing type: 20 g approx..
Cable extension
Net weight
Selection
Guide
Amplifier
Built-in
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Amplifier-
separated
Other
Products
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
4) Panasonic Industrial Devices SUNX’s IP68 test method
GX-F/H
GXL
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
GL
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Please check the resistivity of the sensor against the cutting oil you are using beforehand.
GX-M
GX-U/GX-FU/
GX-N
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
792
SPECIFICATIONS
FIBER
SENSORS
LASER
SENSORS
GX-12 type
PHOTO-
Type
Front sensing
Top sensing
NPN output
PNP output
ELECTRIC
SENSORS
GX-F12A(I)
GX-H12A(I)
GX-F12B(I)
GX-H12B(I)
GX-F12A(I)-P
GX-H12A(I)-P
GX-F12B(I)-P
GX-H12B(I)-P
MICRO
PHOTO-
ELECTRIC
SENSORS
Item
AREA
CE marking directive compliance
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
EMC Directive, RoHS Directive
SENSORS
4.0 mm 0.157 in ± 8 %
SAFETY LIGHT
CURTAINS
SAFETY
/
0 to 3.3 mm 0 to 0.130 in
COMPONENTS
PRESSURE /
FLOW
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
SENSORS
20 % or less of operation distance (with standard sensing object)
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
PARTICULAR
USE
+10
–15
Supply voltage
12 to 24 V DC
% Ripple P-P 10 % or less
SENSORS
Current consumption
15 mA or less
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
SIMPLE
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
WIRE-SAVING
UNITS
Output
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
DC-12 or DC-13
MEASURE-
MENT
Normally open
Normally closed
Normally open
Normally closed
SENSORS
STATIC
Max. response frequency
Operation indicator
Pollution degree
500 Hz
CONTROL
DEVICES
Orange LED (lights up when the output is ON)
3 (Industrial environment)
LASER
MARKERS
Protection
IP68 (IEC), IP68G (Note 4, 5)
PLC
Ambient temperature
Ambient humidity
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
HUMAN
MACHINE
INTERFACES
ENERGY
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ±8 % of sensing range at +23 °C +73 °F
+10
UV
CURING
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Front sensing type: 20 g approx., Top sensing type: 20 g approx..
Cable extension
Net weight
Selection
Guide
Amplifier
Built-in
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Amplifier-
separated
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
Other
Products
4) Panasonic Industrial Devices SUNX’s IP68 test method
GX-F/H
GXL
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
GL
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Please check the resistivity of the sensor against the cutting oil you are using beforehand.
GX-M
GX-U/GX-FU/
GX-N
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
793
FIBER
SPECIFICATIONS
SENSORS
LASER
SENSORS
GX-15 type
PHOTO-
ELECTRIC
SENSORS
NPN output
Long sensing range
PNP output
Long sensing range
Type
MICRO
PHOTO-
ELECTRIC
SENSORS
Front sensing GX-F15A(I) GX-F15B(I) GX-FL15A(I) GX-FL15B(I) GX-F15A(I)-P GX-F15B(I)-P GX-FL15A(I)-P GX-FL15B(I)-P
Top sensing GX-H15A(I) GX-H15B(I) GX-HL15A(I) GX-HL15B(I) GX-H15A(I)-P GX-H15B(I)-P GX-HL15A(I)-P GX-HL15B(I)-P
AREA
Item
SENSORS
CE marking directive compliance
Max. operation distance (Note 3)
Stable sensing range (Note 3)
EMC Directive, RoHS Directive
SAFETY LIGHT
CURTAINS
/
SAFETY
5.0 mm 0.197 in ± 8 %
8.0 mm 0.315 in ± 8 % (Note 4)
5.0 mm 0.197 in ± 8 %
8.0 mm 0.315 in ± 8 % (Note 4)
0 to 6.7 mm 0 to 0.264 in (Note 4)
COMPONENTS
PRESSURE /
FLOW
0 to 4.2 mm 0 to 0.165 in
0 to 6.7 mm 0 to 0.264 in (Note 4)
0 to 4.2 mm 0 to 0.165 in
SENSORS
Iron sheet 20 × 20 × t 1 mm
0.787× 0.787 × t 0.039 in
Iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in
Iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in
Iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in
INDUCTIVE
PROXIMITY
SENSORS
Standard sensing object
PARTICULAR
USE
Hysteresis
20 % or less of operation distance (with standard sensing object)
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
SENSOR
OPTIONS
+10
–15
Supply voltage
Current consumption
12 to 24 V DC
Ripple P-P 10 % or less
%
SIMPLE
WIRE-SAVING
UNITS
15 mA or less
NPN open-collector transistor
PNP open-collector transistor
WIRE-SAVING
SYSTEMS
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
Output
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
Utilization category
Output operation
DC-12 or DC-13
Normally open Normally closed Normally open Normally closed Normally open Normally closed Normally open Normally closed
250 Hz 150 Hz (Note 5) 250 Hz 150 Hz (Note 5)
LASER
MARKERS
Max. response frequency
Operation indicator
Pollution degree
Orange LED (lights up when the output is ON)
3 (Industrial environment)
PLC
HUMAN
MACHINE
Protection
IP68 (IEC), IP68G (Note 6, 7)
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Ambient temperature
Ambient humidity
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
FA
COMPONENTS
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
MACHINE
VISION
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
SYSTEMS
UV
CURING
SYSTEMS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
Within ±2 % for
% fluctuation of the supply voltage
–15
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
Selection
Guide
Amplifier
Built-in
Cable extension
Net weight
Amplifier-
separated
Other
Products
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
GX-F/H
GXL
4) This is the numerical value which the sensor mount onto an insulator. When mounted onto a steel or stainless steel plate, insert the optional
aluminum sheet between the sensor and the plate.
5) This is the numerical value which the sensor mount onto an insulator. When mounted onto a metallic plate, max. response frequency will decrease.
6) Panasonic Industrial Devices SUNX’s IP68 test method
GL
GX-M
GX-U/GX-FU/
GX-N
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
GX
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
1
3
, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
to
7) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Please check the resistivity of the sensor against the cutting oil you are using beforehand.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
794
I/O CIRCUIT DIAGRAMS
FIBER
SENSORS
LASER
SENSORS
NPN output type
PHOTO-
I/O circuit diagram
ELECTRIC
SENSORS
Wiring diagram
MICRO
PHOTO-
ELECTRIC
SENSORS
Color code
Brown
D1
D2
(Brown) +V
AREA
Load
SENSORS
+
–
12 to 24V DC
Black
Blue
Load
(Black) Output
(Note)
+10
SAFETY LIGHT
+
–
12 to 24V DC
%
–15
CURTAINS
SAFETY
/
+10
%
Tr
–15
COMPONENTS
100 mA max.
(Blue) 0 V
ZD
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Internal circuit
Users’ circuit
PARTICULAR
USE
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
SENSORS
SENSOR
OPTIONS
Note: The output does not incorporate a short-circuit protection circuit.
Tr : NPN output transistor
Do not connect it directly to a power supply or a capacitive load.
SIMPLE
WIRE-SAVING
UNITS
PNP output type
WIRE-SAVING
SYSTEMS
I/O circuit diagram
MEASURE-
MENT
Wiring diagram
SENSORS
Color code
(Brown) +V
STATIC
Brown
CONTROL
DEVICES
ZD
LASER
+
–
12 to 24V DC
100 mA max.
Tr
Black
+
–
12 to 24V DC
MARKERS
+10
%
+10
%
–15
–15
(Black) Output
D2
D1
Load
(Note)
Blue
Load
PLC
(Blue) 0 V
HUMAN
MACHINE
INTERFACES
Internal circuit
Users’ circuit
ENERGY
MANAGEMENT
SOLUTIONS
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
FA
Note: The output does not incorporate a short-circuit protection circuit.
COMPONENTS
Tr : PNP output transistor
Do not connect it directly to a power supply or a capacitive load.
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
Other
Products
GX-F/H
GXL
GL
GX-M
GX-U/GX-FU/
GX-N
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
795
FIBER
SENSING CHARACTERISTICS (TYPICAL)
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
ELECTRIC
SENSORS
Sensing field
Correlation between sensing object size and sensing range
MICRO
PHOTO-
4
4
Standard sensing object Standard sensing object
As the sensing object size becomes smaller than
Sensing object Sensing object
0.157
0.157
Iron sheet 12 × 12 × t 1 mm Iron sheet 12 × 12 × t 1 mm
ELECTRIC
SENSORS
a
a mm a a in
×
a
a mm a a in
× ×
×
the standard size (iron sheet 12 × 12 × t 1 mm
0.472 × 0.472 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.472 × 0.472 × t 0.039 in
0.472 × 0.472 × t 0.039 in
ℓ
ℓ
t 1mm
L
L
3
L
3
AREA
L
t 1mm
t 0.039 in
0.118
SENSORS
0.118
t 0.039 in
Top sensing
Front sensing
Top sensing
Front sensing
SAFETY LIGHT
CURTAINS
/
Stainless steel
2
2
SAFETY
(
)
SUS304
0.079
0.079
Iron
COMPONENTS
PRESSURE /
FLOW
1
1
SENSORS
0.039
0.039
INDUCTIVE
PROXIMITY
SENSORS
Aluminum
Brass
10
0
4
2
0.079
Left
0
2
0.079
Right
4
0
5
15
0.591
20
PARTICULAR
USE
0.157
0.157
0.197
0.394
0.787
Center
Operating point ℓ (mm in)
SENSORS
Sensing object side
length a (mm in)
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
GX-8 type
Sensing field
Correlation between sensing object size and sensing range
WIRE-SAVING
SYSTEMS
4
4
Sensing object
Sensing object
Standard sensing object Standard sensing object
As the sensing object size becomes smaller than
the standard size (iron sheet 15 × 15 × t 1 mm
0.591 × 0.591 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.157
0.157
a
a mm a a in
× ×
a
a mm a a in
×
Iron sheet 15 × 15 × t 1 mm Iron sheet 15 × 15 × t 1 mm
×
MEASURE-
MENT
SENSORS
0.591 × 0.591 ×ℓt 0.039 in
L
t 0.039 in
0.591 × 0.591 × t 0.039 in
t 1 mm
t 1 mm
L
L
ℓ
t 0.039 in
L
3
3
Top sensing
0.118
0.118
STATIC
CONTROL
DEVICES
Front sensing
Top sensing
Front sensing
Iron
2
2
0.079
Stainless steel
LASER
0.079
MARKERS
(
)
SUS304
Brass
1
1
Aluminum
PLC
0.039
0.039
HUMAN
MACHINE
0
0
5
10
15
20
0.787
4
2
0.079
Left
0
2
4
INTERFACES
0.197
0.394
0.591
0.157
0.079
0.157
Center
Operating point ℓ (mm in)
Right
Sensing object side
length a (mm in)
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
GX-12 type
MACHINE
VISION
Sensing field
Correlation between sensing object size and sensing range
SYSTEMS
8
8
UV
CURING
Sensing
Standard sensing object Standard sensing object
As the sensing object size becomes smaller than
Sensing object a a mm a a in
0.315
×
×
0.315
object
Iron sheet 20 × 20 × t 1 mm Iron sheet 20 × 20 × t 1 mm
SYSTEMS
a
a
a mm
a in
×
×
the standard size (iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in), the sensing range
shortens as shown in the left figure.
t 1 mm
0.787 × 0.787 × t 0.039 in
0.787 × 0.787 × t 0.039 in
L
t 0.039 in
ℓ
ℓ
Front sensing
6
6
L
L
L
0.236
t 1 mm
t 0.039 in
0.236
Top sensing
Front sensing
Top sensing
Iron
4
4
Stainless steel
0.157
0.157
(
)
SUS304
Selection
Guide
Brass
Amplifier
Built-in
2
2
Aluminum
0.079
0.079
Amplifier-
separated
0
Other
Products
10
5
0
5
0
10
0.394
10
20
30
40
1.575
0.394
0.197
0.197
0.394
0.787
1.181
Left
Center
Right
Sensing object side
length a (mm in)
Operating point ℓ (mm in)
GX-F/H
GXL
GX-15 type
GL
Sensing field
Correlation between sensing object size and sensing range
GX-M
GX-U/GX-FU/
GX-N
8
8
Standard sensing object Standard sensing object
Sensing object
a
a mm a a in
×
×
0.315
0.315
Sensing object
Iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in
Iron sheet 20 × 20 × t 1 mm
a
a mm a
a in L
×
×
As the sensing object size becomes smaller than
the standard size (iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.787 × 0.
78ℓ7 × t 0.039 in
GX
t 1mm t 0.039 in
Top sensing
ℓ
L
t 1mm
Front
6
L
6
L
t 0.039 in
sensing
Top sensing
0.236
0.236
Front
Iron
sensing
4
4
Stainless steel
0.157
0.157
(
)
SUS304
Brass
Aluminum
2
2
0.079
0.079
0
10
5
0
5
0
10
20
30
40
1.575
10
0.394
0.197
0.197
0.394
0.787
1.181
0.394
Left
Center
Right
Sensing object side
Operating point ℓ (mm in)
length a (mm in)
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
796
SENSING CHARACTERISTICS (TYPICAL)
FIBER
SENSORS
LASER
SENSORS
GX-15 (Long sensing range) type
PHOTO-
ELECTRIC
SENSORS
Sensing field
Correlation between sensing object size and sensing range
MICRO
Standard sensing object Standard sensing object
PHOTO-
ELECTRIC
SENSORS
Sensing object
Sensing object
As the sensing object size becomes smaller than
the standard size (iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in), the sensing range
shortens as shown in the left figure.
Iron sheet 30 × 30 × t 1 mm Iron sheet 30 × 30 × t 1 mm
a
a mm a a in
×
a
a mm a a in
× ×
×
1.181 × 1.181 × t 0.039 in
1.181 × 1.181 × t 0.039 in
10
ℓ
10
L
ℓ
L
t 1mm
t 1mm t 0.039 in
Top sensing
L
0.394
0.394
AREA
t 0.039 in
Front sensing
L
Top
SENSORS
Front
Iron
sensing
sensing
Stainless steel
SAFETY LIGHT
(
)
CURTAINS
SAFETY
/
SUS304
COMPONENTS
5
5
0.197
0.197
PRESSURE /
FLOW
Brass
Aluminum
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
0
0
10
20
0.787
30
40
1.575
0
10
5
5
0.197
Right
10
0.394
PARTICULAR
USE
0.394
1.181
0.394
0.197
Left
Center
Operating point ℓ (mm in)
Sensing object side
length a (mm in)
SENSORS
SENSOR
OPTIONS
PRECAUTIONS FOR PROPER USE
Refer to p.1579~ for general precautions.
SIMPLE
WIRE-SAVING
UNITS
GX-8 type
WIRE-SAVING
SYSTEMS
• Never use this product as a sensing device
for personnel protection.
• In case of using sensing devices for
personnel protection, use products which
meet laws and standards, such as OSHA,
ANSI or IEC etc., for personnel protection
applicable in each region or country.
<When using MS-GXL8-4 (Optional)>
MEASURE-
MENT
M3 (length 12 mm 0.472 in) truss head
SENSORS
• Make sure to use a M3
(length: 12 mm 0.472 in or
more) truss head screw
(accessory for MS-GXL8-4).
The tightening torque
should be 0.7 N·m or less.
Do not use a flat head
screw or a pan head
screw.
screw (Accessory for MS-GXL8-4)
STATIC
CONTROL
DEVICES
Sensor mounting bracket
MS-GXL8-4 (Optional)
M3 × 0.5 mm 0.020 in tapped hole
(Depth: 8 mm 0.315 in or more)
or ø3.4 mm ø0.134 in thru-hole
LASER
MARKERS
11.5 mm 0.453 in
PLC
Mounting
The nut, washer, and spring
washer are attached with the
MS-GXL8-4.
HUMAN
GX-6 type
MACHINE
INTERFACES
ø2.4 mm ø0.094 in hole
(Depth: 3 mm 0.118 in or more)
• Use the optional sensor mounting bracket when
installing.
ENERGY
MANAGEMENT
SOLUTIONS
GX-12 type
FA
M3 (length 12 mm 0.472 in or more)
• The tightening torque
should be 0.7 N·m or less.
• To mount the sensor with
a nut, the mounting hole
diameter should be
<When using MS-GX6-1 (Optional / recommended)>
COMPONENTS
pan head screw
(Purchase separately.)
MACHINE
VISION
• To mount the sensor with
a nut, the mounting hole
diameter should be
SYSTEMS
M3 × 0.5 mm 0.020 in tapped hole
(Depth: 10 mm 0.394 in or more)
or ø3.4 mm ø0.134 in thru-hole
UV
M3 pan head screw
Purchase separately.)
CURING
SYSTEMS
(
ø3.4 mm ø0.134 in.
ø3.4 mm ø0.134 in.
Sensor mounting bracket
MS-GX6-1 (Optional)
1
Insert the sensor into the
16 mm 0.630 in
Further, the hole in which
the boss is inserted should
be ø2.5 mm ø0.098 in and
3 mm 0.118 in, or more,
deep.
bracket as shown on the
right.
Hook
Cable
No nuts, washers, or spring washers
are attached with the product.
Purchase separately.
M3 × 0.5 mm 0.020 in
tapped hole (Depth: 8 mm
0.315 in or more) or
2
3
Groove
Push the sensor until the
bracket hook is lodged in
the groove on the upper
portion of the sensor.
Fix the bracket in place
with M3 pan head screw.
ø3.4 mm ø0.134 in thru-hole
Selection
Guide
ø2.5 mm ø0.098 in hole
(Depth: 3 mm 0.118 in or more)
22 mm 0.866 in
Amplifier
Built-in
No nuts, washers, or
spring washers are
attached with the
product.
Amplifier-
separated
ø2.4 mm
GX-15 type
ø0.094 in hole
(Depth: 3 mm
0.118 in or more)
Other
Products
M3 pan head screws or
truss head screws
• The tightening torque
should be 1 N·m or less.
• To mount the sensor with
a nut, the mounting hole
diameter should be
Purchase separately.
Do not use flat head
screws.
GX-F/H
GXL
<When using MS-GL6-1 (Optional) / MS-GL6-2 (Optional)>
M3 × 0.5 mm 0.020 in
tapped holes or ø3.4 mm
ø0.134 in thru-holes
• To mount the sensor with a nut, the mounting hole
diameter should be ø3.4 mm ø0.134 in.
GL
ø3.4 mm ø0.134 in.
GX-M
M3 pan head screw
(Purchase separately.)
M3 pan head screws
(Purchase separately.)
9 mm
0.354 in
GX-U/GX-FU/
GX-N
Sensor mounting bracket
MS-GL6-2 (Optional)
No nuts, washers, or spring wash
are attached with the product.
Purchase separately.
GX
Sensor mounting bracket
MS-GL6-1 (Optional)
ø2.4 mm
0.094 in hole
(Depth: 3 mm
MS-GXL15
0.118 in or more)
(Sensor mounting bracket)
M3
× 0.5 mm 0.020 in
M3
× 0.5 mm 0.020 in
tapped hole or
tapped holes or
ø3.4 mm ø0.134 in thru-holes
ø3.4 mm ø0.134 in thru-holes
Aluminum sheet (Optional)
• MS-A15F
• MS-A15H
• When installing the long
sensing range type on iron
or stainless steel plate, put
the optional aluminum sheet
in between the sensor and
the plate.
10 mm
0.394 in
13.6 mm
0.535 in
No nuts, washers, or
spring washers are
attached with the
product.
No nuts, washers, or
spring washers are
attached with the
product.
Purchase separately.
Purchase separately.
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
797
FIBER
PRECAUTIONS FOR PROPER USE
Refer to p.1579~ for general precautions.
SENSORS
LASER
Influence of surrounding metal
Sensing range
SENSORS
PHOTO-
ELECTRIC
SENSORS
• The sensing range is specified for the standard sensing
object. With a non-ferrous metal, the sensing range is
obtained by multiplying with the correction coefficient
specified below. Further, the sensing range also changes
if the sensing object is smaller than the standard sensing
object or if the sensing object is plated.
• When there is a metal near the sensor, keep the minimum
separation distance specified below.
MICRO
PHOTO-
Front sensing type
ELECTRIC
SENSORS
Metal
Metal
AREA
SENSORS
B
Metal
SAFETY LIGHT
C
C
CURTAINS
/
A
Correction coefficient
SAFETY
COMPONENTS
Model
No.
GX-F6 GX-F8 GX-F12 GX-F15
GX-H6 GX-H8 GX-H12 GX-H15
GX-FL15 GX-HL15
PRESSURE /
FLOW
type
type
SENSORS
type
type
type
type
Metal
Iron
GX-F6 type GX-F8 type GX-F12 type GX-F15 type GX-FL15 type
INDUCTIVE
PROXIMITY
SENSORS
1
1
1
1
1
1
6 mm 0.236 in
(Note 1)
8 mm 0.315 in
(Note 2)
A
7.4 mm 0.291 in 7.1 mm 0.280 in
8 mm 0.315 in
Stainless steel
(SUS304)
0.76 approx. 0.76 approx. 0.79 approx. 0.68 approx. 0.70 approx. 0.76 approx.
PARTICULAR
USE
B
8 mm 0.315 in
3 mm 0.118 in
8 mm 0.315 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in
3 mm 0.118 in 7 mm 0.276 in 7 mm 0.276 in 10 mm 0.394 in
Brass
0.50 approx. 0.50 approx. 0.56 approx. 0.47 approx. 0.45 approx. 0.50 approx.
0.48 approx. 0.48 approx. 0.53 approx. 0.45 approx. 0.43 approx. 0.48 approx.
SENSORS
C
Aluminum
SENSOR
OPTIONS
Notes: 1) When using MS-GX6-1 (recommended mounting bracket, optional),
the distance “A” including the thickness of mounting bracket will be
6.4 mm 0.252 in.
SIMPLE
WIRE-SAVING
UNITS
Wiring
2) The GXL-FL15 type should be mounted on an insulator. To mount
it on an iron or stainless steel, use the enclosed aluminum sheet.
• The output does not incorporate a short-circuit protection
circuit. Do not connect it directly to a power supply or a
capacitive load.
WIRE-SAVING
SYSTEMS
Top sensing type
MEASURE-
MENT
Metal
D
Metal
SENSORS
STATIC
CONTROL
DEVICES
Others
G
Metal
• Do not use during the initial transient time (50 ms) after
the power supply is switched on.
G
LASER
MARKERS
E
F
PLC
GX-H6 type GX-H8 type GX-H12 type GX-H15 type GX-HL15 type
D
3 mm 0.118 in
4 mm 0.157 in
7 mm 0.276 in
6 mm 0.236 in 12 mm 0.472 in
HUMAN
MACHINE
E
10 mm 0.394 in 10 mm 0.394 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in
INTERFACES
10 mm 0.394 in
(Note)
3 mm 0.118 in 10 mm 0.394 in
ENERGY
MANAGEMENT
SOLUTIONS
F
2 mm 0.079 in
2 mm 0.079 in
3 mm 0.118 in
3 mm 0.118 in
3 mm 0.118 in
3 mm 0.118 in
0 mm
0 in
G
FA
COMPONENTS
Note: When GX-HL15 type is mounted on an insulator or seated on the
enclosed aluminum sheet, the distance “F” can be zero.
MACHINE
VISION
SYSTEMS
Mutual interference prevention
UV
CURING
• When two or more sensors are installed in parallel or face
to face, keep the minimum separation distance specified
below to avoid mutual interference.
SYSTEMS
Front sensing
H
J
Between “I” type
and non “I” type
0 mm 15 mm
(Note 2) 0.591 in
GX-F6
GX-H6
type
Selection
Guide
Between two “I” types 13 mm 25 mm
or two non “I” types
Amplifier
Built-in
0.512 in 0.984 in
Between “I” type
and non “I” type
0 mm 15 mm
(Note 2) 0.591 in
Amplifier-
GX-F8
GX-H8
type
H
H
separated
Other
Products
Between two “I” types 20 mm 35 mm
or two non “I” types
J
0.787 in 1.378 in
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
GX-F12
GX-H12
type
GX-F/H
GXL
Between two “I” types 25 mm 50 mm
or two non “I” types
0.984 in 1.969 in
Top sensing
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
GX-F15
GX-H15
type
GL
Between two “I” types 45 mm 70 mm
or two non “I” types
GX-M
1.772 in 2.756 in
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
GX-U/GX-FU/
GX-N
J
H
GX-FL15
GX-HL15
type
Between two “I” types 110 mm 170 mm
or two non “I” types
3.059 in 6.693 in
GX
Notes: 1) “I” in the model No. specifies
the different frequency type.
2) Close mounting is possible for up to two sensors.
When mounting three sensors or more at an equal spacing, align
the model with “I” and the model without “I” alternately. The minimum
value of dimension “H” should be as given below.
GX-F6/H6 type: 3.5 mm 0.138 in
GX-F8/H8 type: 6 mm 0.236 in
GX-F12/H12 type: 6.5 mm 0.256 in
GX-F15/H15 type: 15 mm 0.591 in
GX-FL15/HL15 type: 47.5 mm 1.870 in
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
798
DIMENSIONS (Unit: mm in)
FIBER
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor
Sensor
GX-F6□
GX-H6□
PHOTO-
ELECTRIC
SENSORS
3
MICRO
0.118
PHOTO-
ELECTRIC
SENSORS
ø3 ø0.118 cable,
1 m 3.281 ft long
Operation indicator
(Orange)
6
0.236
11
6
0.433 0.236
24.5
AREA
0.5
SENSORS
0.020
0.965
11.5
6
0.453 0.236
25
SAFETY LIGHT
ø3 ø0.118 cable,
1 m 3.281 ft long
Sensing direction
2.6
CURTAINS
SAFETY
/
0.5
0.5
0.984
0.020
6
0.020
COMPONENTS
3
0.5
0.236
0.102
6
0.118
2.5
0.020
PRESSURE /
FLOW
0.098
6
0.236
0.236
SENSORS
Operation indicator (Orange)
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
Sensor
Sensor
GX-F8□
GX-H8□
SENSORS
SENSOR
OPTIONS
ø3.1 ø0.122 mounting hole
5.4 0.213 6.3 0.248
Operation indicator (Orange)
Operation indicator
(Orange)
Sensing
direction
SIMPLE
7.4
WIRE-SAVING
UNITS
0.291
2.95
8
0.116
0.315
ø3 ø0.118 cable,
1 m 3.281 ft long
18.5
0.728
6.8
WIRE-SAVING
SYSTEMS
Sensing
direction
8.55
0.337
0.268
2 0.079
3.7
7.7
11.5
23
MEASURE-
MENT
R4.25
3.85
22.5
ø9 ø0.354
0.146
0.303
0.453
0.906
0.886
R0.167 0.152
9.1 0.358
2.5
2.4
SENSORS
ø3.1 ø0.12
0.095
9.75
6.5
mounting hole
0.384
8.2 0.323
STATIC
0.256
4.8 0.189 5.3 0.209
CONTROL
DEVICES
ø3 ø0.118 cable,
1 m 3.281 ft long
2.65
8.6
4.6
8
5.4
1
0.098
5
25
0.104
1
0.339
0.181
LASER
0.315
0.213
0.039
0.197
0.984
0.039
MARKERS
6.3
5.3
0.248
0.209
PLC
HUMAN
Sensor
Sensor
GX-F12□
GX-H12□
MACHINE
INTERFACES
Operation indicator
(Orange)
ø3 ø0.118 cable,
ENERGY
1 m 3.281 ft long
MANAGEMENT
SOLUTIONS
FA
Sensing
direction
6.8 0.268 7.8 0.307
COMPONENTS
7.1
0.280
Operation indicator
(Orange)
MACHINE
VISION
ø3.1 ø0.122 mounting hole
ø6 ø0.236 screw seat,
1.4 0.055 deep
22.2
3.3 0.130
1.5 0.059
12
0.874
SYSTEMS
0.472
8.65 0.341
12
UV
4.8 0.189
0.472
CURING
SYSTEMS
3 0.118
5.5
Sensing
direction
12
ø2.3
R6.25 R0.246
0.217
0.472
ø0.091
27
27.8
11.05
16
16
12
0.472
13
1.063
1.095
0.630
12.5
ø12.5 ø0.492
0.435
0.630
0.512
0.492
6.2
6.5 0.256
0.244
ø3.1 ø0.12
mounting hole
12.4
5 0.197
16
3.1 5.8
0.488
ø2.3
ø0.091
2.5
1.5
Selection
Guide
0.630
ø6 ø0.236 screw seat,
0.12 0.228
4.4 0.173
0.098
0.059
0.8 0.032 deep
27.4
4.4
Amplifier
Built-in
1.079
0.173
ø3 ø0.118 cable,
2.8
6.8
1 m 3.281 ft long
Amplifier-
separated
0.110
5.2
0.268
7.8
0.205
Other
Products
0.307
5.6
0.221
GX-F/H
GXL
Sensor
Sensor
GX-F(L)15
GX-H(L)15□
□
GL
Operation indicator (Orange)
2-ø3.1 ø0.122 holes
ø3 ø0.118 cable, 1 m 3.281 ft long
31.5
ø3 ø0.118 cable,
1 m 3.281 ft long
1.240
GX-M
7.5
20.5
GX-U/GX-FU/
GX-N
0.295
0.807
9
Sensing direction
0.354
GX
9
15
0.591
0.354
26
1.024
2-ø3.1 ø0.122 holes
Sensing
direction
21.5
0.846
ø15.5 ø0.610
11.95
0.470
ø15.5
ø0.610
3
14.15
0.557
7.8
5.3
0.118
0.307
0.209
5.3
0.209
14.15
16.5
0.650
8
15.65
0.616
0.557
0.315
8.5
0.335
2.8
Operation indicator (Orange)
3.7
0.146
5.7
2.3
0.091
15
0.591
0.110
0.224
2.8
7.2
29.5
1.161
0.110 0.283
Rectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
799
FIBER
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor mounting bracket for GX-6 type (Optional)
Sensor mounting bracket for GX-6 type (Optional)
MS-GX6-1
MS-GL6-1
PHOTO-
ELECTRIC
SENSORS
25.75
ø3.1
Mounting hole dimensions
1.014
25.35
0.998
ø0.122
MICRO
PHOTO-
Mounting hole dimensions
6
0.236
ELECTRIC
SENSORS
13.6
ø2.4 ø0.094 hole,
22
0.535
6
0.236
6.8
2-3.2 × 3.8 0.126 × 0.150 oblong holes
3 0.118 or more deep
0.866
0.268
AREA
SENSORS
3.55
0.140
22.2
0.874
5.5
2.3
0.091
(
)
0.217
2-M3 × 0.5 0.020 tapped holes
(or 2-ø3.4 ø0.134 thru-holes)
SAFETY LIGHT
M3 × 0.5 0.020 tapped hole,
5.6
CURTAINS
/
6.4
0.252
8 0.315 or more deep
t 0.4
0.220
SAFETY
(or ø3.4 ø0.134 thru-hole)
19.6 0.772 t 0.016
COMPONENTS
(Note)
t 0.4
t 0.016
PRESSURE /
FLOW
2
0.079
SENSORS
Material: Stainless steel (SUS301)
INDUCTIVE
PROXIMITY
SENSORS
Note: 20 mm 0.787 in with the sensor fitted.
Material: Stainless steel (SUS304)
PARTICULAR
USE
Sensor mounting bracket for GX-6 type (Optional)
Sensor mounting bracket for GX-8 type (Optional)
MS-GL6-2
MS-GXL8-4
SENSORS
SENSOR
OPTIONS
Mounting hole dimensions
Mounting hole dimensions
6
SIMPLE
WIRE-SAVING
UNITS
0.236
Center of
sensing
0.079
9
10
ø2.4 ø0.094 hole,
3 0.118 or more deep
0.354
0.394
2
2
6
3.2 × 3.8 0.126 × 0.150 oblong hole
2.3
0.079
0.236
0.091
WIRE-SAVING
SYSTEMS
5.3
0.209
5.6
5.5
0.217
0.3
0.012
(11.5)
(0.453)
M3 × 0.5 0.020
M3 × 0.5 0.020 tapped hole
(or ø3.4 ø0.134 thru-hole)
ø2.4 ø0.094 hole,
3 0.118 or more deep
t 0.4
t 0.016
tapped hole,
8 0.315 or more deep
(or ø3.4 ø0.134 thru-hole)
11.5
0.453
MEASURE-
MENT
2.2
0.087
0.220
t 0.4
t 0.016
1.5
13.2 0.520
0.059
3.3
0.130
SENSORS
(16.2)
(0.638)
15.8
0.622
(Note)
STATIC
CONTROL
DEVICES
4.5 0.177
ø3.1 ø0.122 hole
Material: Stainless steel (SUS301)
LASER
MARKERS
Note: 13.4 mm 0.528 in with the sensor fitted.
Material: Stainless steel (SUS304)
PLC
1 pc. each of M3 (length 12 mm 0.472 in) truss head screw,
nut, spring washer and plain washer is attached.
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Sensor mounting bracket for GX-15 type (Optional)
Aluminum sheet (Optional)
MS-GXL15
MS-A15F MS-A15H
FA
COMPONENTS
MACHINE
VISION
t 2
t 0.079
SYSTEMS
30
1.181
UV
CURING
14
SYSTEMS
0.551
2.5
2-ø3.2
ø0.126
9
0.098
0.354
39.5
7
1.555
2-3.2 × 5.1
0.276
0.126 × 0.201
oblong holes
MS-A15H:
4
(
)
30 1.181
0.157
2-M3 × 0.5 0.020 tapped holes
Selection
Guide
Amplifier
Material: Cold rolled carbon steel (SPCC)
9
t = 0.3 0.012
Built-in
0.354
21
Amplifier-
separated
1.9
1.9
0.075
0.827
0.075
Other
Products
GX-F/H
GXL
GL
GX-M
GX-U/GX-FU/
GX-N
GX
800
MEMO
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明