TQ4H-L2-3V [PANASONIC]
Power/Signal Relay, 4PDT, Latched, 0.133A (Coil), 3VDC (Coil), 400mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
| 型号： | TQ4H-L2-3V |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, 4PDT, Latched, 0.133A (Coil), 3VDC (Coil), 400mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 |
| 文件： | 总12页 (文件大小：214K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Leading the market,
our 5 mm 2-pole surface
mount relays comply with
JIS C0806
TQ RELAYS
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 140 mW (minimum operating
power of 79 mW) has been achieved
(4 Form C single side stable type is
280 mW).
8. Latching types also available
9. Self-clinching terminal also
available
10. A range of surface-mount types is
also available.
SA: Low-profile surface-mount
terminal type
3. Suitable for SMD automatic
insertion (SA type)
SL: High connection reliability surface-
mount terminal type
With a height of 5.6 mm .220 inch, the
relays meet JIS C 0806 specifications.
4. High density mounting possible
High-efficiency magnetic circuits
ensure low magnetic flux leakage.
Because characteristics are little
changed by proximity mounting, high-
density mounting is possible.
5. The use of gold-clad twin crossbar
contacts ensures high contact
reliability.
SS: Space saving surface-mount
terminal type
11. M.B.B. contact types available
Compliance with RoHS Directive
TYPICAL APPLICATIONS
1. Communications
2. Measurement equipment
3. OA equipment
4. Industrial machines
6. DIL terminal array enables use of IC
sockets
7. Low thermal electromotive force
As well as low power consumption of
140 mW, use of a structure with
separate coil and contact sections has
reduced thermal electromotive force to
the low level of approximately 5 µV.
Surface mount types achieve
approximately 2 µV.
FEATURES
1. Flat compact size
14.0(L) × 9.0(W) × 5.0(H) .551(L) ×
.354(W) × .197(H)
2. Nominal operating power:
High sensitivity of 140mW (2 Form
C single side stable type)
ORDERING INFORMATION
TQ 2
Contact arrangement
2: 2 Form C
4: 4 Form C
Terminal shape
Nil: Standard PC board terminal
H: Self-clinching terminal
SA: SA type
SL: SL type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
MBB function
Nil: Standard (B.B.M.) type
2M: 2M.B.B. type
Nominal coil voltage (DC)*
1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/2/3/4/5-pin side)
Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side)
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
TYPES
■ Standard PC board terminal and self-clinching terminal
1. Standard (B.B.M.) type
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3V DC
4.5V DC
5V DC
TQ2-3V
TQ2-L-3V
TQ2-L-4.5V
TQ2-L-5V
TQ2-L-6V
TQ2-L-9V
TQ2-L-12V
TQ2-L-24V
—
TQ2-L2-3V
TQ2-L2-4.5V
TQ2-L2-5V
TQ2-L2-6V
TQ2-L2-9V
TQ2-L2-12V
TQ2-L2-24V
—
TQ2-4.5V
TQ2-5V
6V DC
TQ2-6V
2 Form C
9V DC
TQ2-9V
12V DC
24V DC
48V DC
3V DC
TQ2-12V
TQ2-24V
TQ2-48V
TQ4-3V
TQ4-L-3V
TQ4-L-4.5V
TQ4-L-5V
TQ4-L-6V
TQ4-L-9V
TQ4-L-12V
TQ4-L-24V
—
TQ4-L2-3V
TQ4-L2-4.5V
TQ4-L2-5V
TQ4-L2-6V
TQ4-L2-9V
TQ4-L2-12V
TQ4-L2-24V
—
4.5V DC
5V DC
TQ4-4.5V
TQ4-5V
6V DC
TQ4-6V
4 Form C
9V DC
TQ4-9V
12V DC
24V DC
48V DC
TQ4-12V
TQ4-24V
TQ4-48V
Standard packing (2 Form C): Tube: 50 pcs.; Case: 1,000 pcs.
Standard packing (4 Form C): Tube: 25 pcs.; Case: 500 pcs.
2) Self-clinching terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3V DC
4.5V DC
5V DC
TQ2H-3V
TQ2H-L-3V
TQ2H-L-4.5V
TQ2H-L-5V
TQ2H-L-6V
TQ2H-L-9V
TQ2H-L-12V
TQ2H-L-24V
—
TQ2H-L2-3V
TQ2H-L2-4.5V
TQ2H-L2-5V
TQ2H-L2-6V
TQ2H-L2-9V
TQ2H-L2-12V
TQ2H-L2-24V
—
TQ2H-4.5V
TQ2H-5V
6V DC
TQ2H-6V
2 Form C
9V DC
TQ2H-9V
12V DC
24V DC
48V DC
3V DC
TQ2H-12V
TQ2H-24V
TQ2H-48V
TQ4H-3V
TQ4H-L-3V
TQ4H-L-4.5V
TQ4H-L-5V
TQ4H-L-6V
TQ4H-L-9V
TQ4H-L-12V
TQ4H-L-24V
—
TQ4H-L2-3V
TQ4H-L2-4.5V
TQ4H-L2-5V
TQ4H-L2-6V
TQ4H-L2-9V
TQ4H-L2-12V
TQ4H-L2-24V
—
4.5V DC
5V DC
TQ4H-4.5V
TQ4H-5V
6V DC
TQ4H-6V
4 Form C
9V DC
TQ4H-9V
12V DC
24V DC
48V DC
TQ4H-12V
TQ4H-24V
TQ4H-48V
Note: Types (“-3” to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load.
2. M.B.B. type
1) Standard PC board terminal
Single side stable
Contact arrangement
Nominal coil voltage
Part No.
3V DC
4.5V DC
5V DC
TQ2-2M-3V
TQ2-2M-4.5V
TQ2-2M-5V
TQ2-2M-6V
TQ2-2M-9V
TQ2-2M-12V
TQ2-2M-24V
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
2) Self-clinching terminal
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
3V DC
4.5V DC
5V DC
TQ2H-2M-3V
TQ2H-2M-4.5V
TQ2H-2M-5V
TQ2H-2M-6V
TQ2H-2M-9V
TQ2H-2M-12V
TQ2H-2M-24V
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
Notes: 1. Latching types are available by request. Please consult us for details.
2. UL/CSA approved (UL file No.:E 43149, CSA file No.: LR26550)
3. Types (“-1” to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load and low thermal power.
■ Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TQ2Sꢀ-1.5V
TQ2Sꢀ-3V
TQ2Sꢀ-4.5V
TQ2Sꢀ-5V
TQ2Sꢀ-6V
TQ2Sꢀ-9V
TQ2Sꢀ-12V
TQ2Sꢀ-24V
TQ2Sꢀ-48V
TQ2Sꢀ-L-1.5V
TQ2Sꢀ-L-3V
TQ2Sꢀ-L-4.5V
TQ2Sꢀ-L-5V
TQ2Sꢀ-L-6V
TQ2Sꢀ-L-9V
TQ2Sꢀ-L-12V
TQ2Sꢀ-L-24V
—
TQ2Sꢀ-L2-1.5V
TQ2Sꢀ-L2-3V
TQ2Sꢀ-L2-4.5V
TQ2Sꢀ-L2-5V
TQ2Sꢀ-L2-6V
TQ2Sꢀ-L2-9V
TQ2Sꢀ-L2-12V
TQ2Sꢀ-L2-24V
—
4.5V DC
5V DC
2c
6V DC
9V DC
12V DC
24V DC
48V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TQ2Sꢀ-1.5V-Z
TQ2Sꢀ-3V-Z
TQ2Sꢀ-4.5V-Z
TQ2Sꢀ-5V-Z
TQ2Sꢀ-6V-Z
TQ2Sꢀ-9V-Z
TQ2Sꢀ-12V-Z
TQ2Sꢀ-24V-Z
TQ2Sꢀ-48V-Z
TQ2Sꢀ-L-1.5V-Z
TQ2Sꢀ-L-3V-Z
TQ2Sꢀ-L-4.5V-Z
TQ2Sꢀ-L-5V-Z
TQ2Sꢀ-L-6V-Z
TQ2Sꢀ-L-9V-Z
TQ2Sꢀ-L-12V-Z
TQ2Sꢀ-L-24V-Z
—
TQ2Sꢀ-L2-1.5V-Z
TQ2Sꢀ-L2-3V-Z
TQ2Sꢀ-L2-4.5V-Z
TQ2Sꢀ-L2-5V-Z
TQ2Sꢀ-L2-6V-Z
TQ2Sꢀ-L2-9V-Z
TQ2Sꢀ-L2-12V-Z
TQ2Sꢀ-L2-24V-Z
—
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
48V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
RATING
■ Standard PC board terminal and self-clinching terminal
1. Coil data
[Standard (B.B.M.) type]
1) Single side stable (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
46.7mA
31.1mA
28.1mA
23.3mA
15.5mA
11.7mA
8.3mA
64.3Ω
144.6Ω
178Ω
257Ω
579Ω
140mW
150%V of
nominal voltage
6V DC
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
9V DC
12V DC
24V DC
1,028Ω
2,880Ω
200mW
300mW
120%V of
nominal voltage
48V DC
6.25mA
7,680Ω
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
2) 1 coil latching (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
33.3mA
22.2mA
20mA
90Ω
202.5Ω
250Ω
360Ω
810Ω
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
100mW
150mW
150%V of
nominal voltage
6V DC
16.7mA
11.1mA
8.3mA
6.3mA
9V DC
12V DC
24V DC
1,440Ω
3,840Ω
3) 2 coil latching (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Set coil
66.7mA
44.4mA
40mA
Reset coil
66.7mA
44.4mA
40mA
Set coil
45Ω
Reset coil
45Ω
101.2Ω
125Ω
180Ω
405Ω
Set coil
Reset coil
3V DC
4.5V DC
5V DC
101.2Ω
125Ω
180Ω
405Ω
720Ω
150%V of
nominal voltage
200mW
200mW
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
6V DC
33.3mA
22.2mA
16.7mA
33.3mA
22.2mA
16.7mA
9V DC
12V DC
720Ω
120%V of
nominal voltage
24V DC
12.5mA
12.5mA
1,920Ω
1,920Ω
300mW
300mW
4) Single side stable (4 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
93.8mA
62.2mA
56.2mA
46.5mA
31.1mA
23.3mA
11.7mA
32Ω
72.3Ω
89Ω
129Ω
289Ω
514Ω
2,056Ω
150%V of
nominal voltage
6V DC
280mW
400mW
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
9V DC
12V DC
24V DC
120%V of
nominal voltage
48V DC
8.3mA
5,760Ω
5) 1 coil latching (4 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
66.6mA
44.4mA
40mA
45Ω
101.2Ω
125Ω
180Ω
405Ω
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
6V DC
33.3mA
22.2mA
16.7mA
8.3mA
200mW
9V DC
12V DC
24V DC
720Ω
2,880Ω
6) 2 coil latching (4 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Set coil
133mA
88.9mA
80mA
Reset coil
133mA
88.9mA
80mA
Set coil
22.5Ω
50.6Ω
62.5Ω
90Ω
202.5Ω
360Ω
1,440Ω
Reset coil
22.5Ω
50.6Ω
62.5Ω
90Ω
202.5Ω
360Ω
1,440Ω
Set coil
Reset coil
3V DC
4.5V DC
5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
6V DC
66.6mA
44.4mA
33.3mA
16.7mA
66.6mA
44.4mA
33.3mA
16.7mA
400mW
400mW
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
[M.B.B. type]
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
66.7mA
44.4mA
40mA
45Ω
101Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
150%V of
nominal voltage
6V DC
33.3mA
22.2mA
16.7mA
8.3mA
200mW
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C, 2 Form D (M.B.B.)
4 Form C
Contact
Rating
Initial contact resistance, max.
Contact material
Max. 50mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
Nominal switching capacity
Max. switching power
1 A 30 V DC, 0.5 A 125 V AC*1 (resistive load)
30 W (DC), 62.5 V A (AC)*1 (resistive load)
110 V DC, 125 V AC*1
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*2
1 A
10µA 10mV DC
Standard (B.B.M) type: 140 mW (3 to 12 V DC),
200 mW (24 V DC), 300 mW (48 V DC)
M.B.B. type: 200 mW
Single side stable
Nominal
280 mW (3 to 24 V DC), 400 mW (48 V DC)
operating power
1 coil latching
100 mW (3 to 12 V DC), 150 mW (24 V DC)
200 mW (3 to 12 V DC), 300 mW (24 V DC)
200 mW
400 mW
2 coil latching
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA),
M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA)
Between open contacts
Breakdown
voltage (Initial)
Between contact and coil
1,000 Vrms for 1min. (Detection current: 10 mA)
1,000 Vrms for 1min. (Detection current: 10 mA)
Electrical
characteristics
Between contact sets
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Release time [Reset time] (at 20°C 68°F)
Functional
Shock
Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Vibration
resistance
Mechanical (at 180 cpm)
Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107
Standard (B.B.M) type: Min. 2×105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive)
Expected life
Electrical (at 20 cpm)
M.B.B. type: Min. 105 (1 A 30 V DC resistive)
Standard (B.B.M) type:
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
M.B.B. type:
Ambient temperature: –40°C to +50°C –40°F to +122°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and
storage*3
Conditions
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 1.5 g .053 oz
Approx. 3 g .106 oz.
Notes: *1 AC is standard (B.B.M) type only.
*2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level])
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
■ Surface-mount terminal
1. Coil data
1) Single side stable
Nominal operating
current
(at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
93.8mA
46.7mA
31mA
16Ω
64.3Ω
145Ω
178Ω
257Ω
579Ω
1,028Ω
2,880Ω
4.5V DC
5V DC
28.1mA
23.3mA
15.5mA
11.7mA
8.3mA
140mW
150%V of
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
nominal voltage
6V DC
9V DC
12V DC
24V DC
200mW
300mW
120%V of
nominal voltage
48V DC
6.3mA
7,680Ω
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
2) 1 coil latching
Nominal operating
current
(at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
46.9mA
23.3mA
15.6mA
14mA
32Ω
128.6Ω
289.3Ω
357Ω
4.5V DC
5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
70mW
150%V of
nominal voltage
6V DC
11.7mA
7.8mA
5.8mA
4.2mA
514Ω
9V DC
1,157Ω
2,057Ω
5,760Ω
12V DC
24V DC
100mW
3) 2 coil latching
Nominal operating
current
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Set coil
93.8mA
46.7mA
31mA
Reset coil
93.8mA
46.7mA
31mA
Set coil
16Ω
64.3Ω
145Ω
178Ω
257Ω
579Ω
1,028Ω
2,880Ω
Reset coil
16Ω
64.3Ω
145Ω
178Ω
257Ω
579Ω
1,028Ω
2,880Ω
Set coil
140mW
200mW
Reset coil
140mW
200mW
1.5V DC
3V DC
4.5V DC
5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
28.1mA
23.3mA
15.5mA
11.7mA
8.3mA
28.1mA
23.3mA
15.5mA
11.7mA
8.3mA
150%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
2. Specifications
Characteristics
Item
Specifications
Arrangement
Initial contact resistance, max.
2 Form C
Contact
Max. 75 mΩ (By voltage drop 6 V DC 1A)
AgNi type+Au clad
Contact material
Nominal switching capacity
Max. switching power
2 A 30 V DC, 0.5 A 125 V AC (resistive load)
60 W (DC), 62.5 VA (AC) (resistive load)
220 V DC, 125 V AC
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
Nominal operating
1 coil latching
power
2 A
Rating
10µA 10mV DC
140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)
70 mW (1.5 to 12 V DC), 100 mW (24 V DC)
2 coil latching
Insulation resistance (Initial)
Between open contacts
140 mW (1.5 to 12 V DC), 200 mW (24 V DC)
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
1,500 Vrms for 1 min. (Detection current: 10 mA)
1,500 Vrms for 1 min. (Detection current: 10 mA)
1,500 V (10×160µs) (FCC Part 68)
2,500 V (2×10µs) (Bellcore)
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Between open contacts
Between contacts and coil
Surge breakdown
voltage (Initial)
Electrical
characteristics
Max. 50°C
Temperature rise (at 20°C 68°F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), Min. 2×105 (1 A 30 V DC resistive),
Expected life
Electrical
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Ambient temperature:
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
–40°C to +85°C –40°F to +185°F, Max. –40°C to +70°C (2A) Max. –40°F to +158°F (2A);
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
20 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level])
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 25).
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
REFERENCE DATA
■ Standard PC board terminal and self-clinching terminal
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TQ2-12V, 10 pcs.
100
90
DC load (cosϕ=1)
AC load (cosϕ=1)
30 V DC resistive load
125 V AC resistive load
80
100
10
Pick-up voltage
Max.
1.0
70
60
50
Min.
0.5
0.4
40
Drop-out voltage
30
0.3
Max.
Min.
0.2
20
10
0
0
0.5
1.0
10
100
1,000
10,000
30
100
200
4
Switching current, A
No. of operations, ×10
Switching voltage,V
4.-(1) Electrical life (DC load)
Tested sample: TQ2-12V, 6 pcs.
4.-(2) Electrical life (AC load)
Tested sample: TQ2-12V, 6 pcs.
Condition: 1 A 30 V DC resistive load, 20 cpm
Condition: 0.5 A 125 V AC resistive load, 20 cpm
Change of pick-up and drop-out voltage
Change of contact resistance
Change of pick-up and drop-out voltage
100
90
100
90
100
90
80
70
60
80
70
60
80
Pick-up voltage
Max.
Min.
Pick-up voltage
Drop-out voltage
Max.
Min.
70
60
50
40
50
40
50
40
Max.
Min.
Drop-out voltage
Max.
Min.
Max.
Min.
30
20
10
30
20
10
30
20
10
0
5
10
15
20
0
5
10
0
5
10
15
20
4
4
4
No. of operations, ×10
No. of operations, ×10
No. of operations, ×10
5. Coil temperature rise (2C)
Tested sample: TQ2-12V
6. Ambient temperature characteristics
Tested sample: TQ2-12V, 5 pcs.
Measured portion: Inside the coil
Ambient temperature: 30°C 86°F
Change of contact resistance
40
30
70
100
90
80
70
60
Nominal coil voltage
3 to 12 V DC type
24 V DC type
60
50
40
30
20
Drop-out
voltage
x
x
20
10
1 A
Pick-up voltage
20 40 60 80
1 A
0 A
-40 -20
0
50
40
Ambient
temperature,°C
-10
Max.
Min.
30
20
10
-20
10
0
-30
-40
0
5
10
100 110 120 130 140 150
Coil applied voltage, %V
4
No. of operations, ×10
7.-(1) High-frequency characteristics
(Isolation)
7.-(2) High-frequency characteristics
(Insertion loss)
8. Malfunctional shock (single side stable)
Tested sample: TQ2-12V, 6 pcs.
,
Deenergized
condition
Energized condition
X X
Z
,
Y
Z
,
2
980m/s
Y
Y
X
Z
100
50
2
2
980m/s
980m/s
1.0
0.8
2
2
980m/s
0.6
0.4
0.2
980m/s
,
,
Z
X
2
980m/s
Y
,
0
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
9.-(1) Influence of adjacent mounting
9.-(2) Influence of adjacent mounting
10. Contact reliability
(1 mA 5 V DC resistive load)
Tested sample: TQ2-12V
Condition: Detection level 10 W
F(t), %
99.9
99.0
95.0
ON
ON
10
0
10
0
ON ON
Pick-up voltage
Drop-out voltage
Pick-up voltage
Drop-out voltage
70.0
50.0
30.0
–10
–10
ON
ON
10.0
5.0
OFF OFF
10
0
10
0
OFF
2.0
m=2.15
1.0
0.5
7
µ=2.7×10
95% reliability limit =
OFF
6
OFF
7.6×10
–10
–10
0.2
0.1
(Weibull probability paper)
OFF
1.0
10
100
0
5
0
5
.197
.197
6
Inter-relay distance , mm inch
No. of operations, ×10
Inter-relay distance , mm inch
11. Actual load test (35 mA 48 V DC wire spring relay load)
Circuit
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
20Hz
90
80
70
80
Pick-up voltage
70
Max.
Min.
220Ω
220Ω
60
50
40
60
50
40
30
20
10
0
57 V
DC
Max.
Min.
30
Drop-out voltage
Max.
Min.
20
10
0
Wire spring relay Circuit diagram
10
20
30
40
50
10
20
30
40
50
4
4
No. of operations, ×10
No. of operations, ×10
12. 0.1 A 53 V DC resistive load test
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
80
Pick-up voltage
Max.
70
60
50
40
30
20
10
Min.
Max.
Min.
Drop-out voltage
Max.
Min.
0
500
1,000
1,500
2,000
0
500
1,000
1,500
2,000
4
4
No. of operations, ×10
No. of operations, ×10
13. Distribution of M.B.B. time
Tested sample: TQ2-2M-5V, 85 pcs.
60
60
50
40
30
20
Terminal Nos. 2-3-4: ON
Terminal Nos. 2-3-4: OFF
−
−
x:
x:
105.6 µs
71.6 µs
3σn-1: 163.8 µs
3σn-1: 127.1 µs
Min.: 17 µs
50
40
30
20
Min.: 23 µs
Max.: 243 µs
Max.: 187 µs
41
31
Terminal Nos. 7-8-9: ON
Terminal Nos. 7-8-9: OFF
−
−
35
27
x:
115.6 µs
x:
80.7 µs
3σn-1: 167.3 µs
Min.: 35 µs
3σn-1: 156.7 µs
Min.: 29 µs
30
19
26
21
Max.: 254 µs
Max.: 298 µs
19
15
17
11
12
10
7
4
10
0
10
0
6
2
1
2
4
10
50 100 150 200 250 300 µs min.
10
50 100 150 200 250 300 µs min.
50 100 150 200 250 300 350 µs max.
50 100 150 200 250 300 350 µs max.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
■ Surface-mount terminal
1. Maximum switching capacity
2. Life curve
3. Mechanical life (mounting by IRS method)
Tested sample: TQ2SA-12V, 10 pcs.
100
90
3.0
2.0
100
50
80
Pick-up voltage
70
DC resistive load
Max.
Min.
1.0
60
50
40
30
20
125V AC
resistive load
30V DC
resistive load
AC resistive load
0.5
0.4
Drop-out voltage
0.3
30
Max.
Min.
10
0
20
10
0
0.2
0
20 30 50
100
200 300
1.0
2.0
IRS1
10
100
1,000 10,000
No. of operations, ×104
Switching current, A
Contact voltage, V
4.-(1) Electrical life (2 A 30 V DC resistive load)
4.-(2) Electrical life (0.5 A 125V AC resistive load)
Tested sample: TQ2SA-12V, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
(mounting by IRS method)
Tested sample: TQ2SA-12V, 6 pcs
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
(mounting by IRS method)
Change of contact resistance
(mounting by IRS method)
100
90
100
90
80
70
60
50
40
30
20
10
0
100
90
80
80
Pick-up voltage
Pick-up voltage
Drop-out voltage
70
70
60
50
40
30
20
10
0
Max.
Max.
Min.
Min.
60
50
Max.
Min.
40
Drop-out voltage
30
Max.
Min.
Max.
Min.
20
10
0
IRS
1
2
3
4
5
6
7
8
9
10
IRS
1
2
3
4
5
6
7
8
9
10
IRS
1
2
3
4
5
6
7
8
9 10
No. of operations, ×104
No. of operations, ×104
No. of operations, ×104
5. Coil temperature rise
6. Operate/release time
Tested sample: TQ2SA-12V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F
Tested sample: TQ2SA-12V, 6 pcs.
Change of contact resistance
(mounting by IRS method)
100
90
80
70
60
50
40
30
20
10
0
70
5
4
2A
0A
Coil voltage
Operate time
Release time
DC 12V type
DC 48V type
60
50
Max.
2A
0A
3
40
30
20
10
0
Min.
Max.
Min.
2
Max.
Min.
1
0
100 110 120 130 140 150
IRS
1
2
3
4
5
6
7
8
9 10
70
80
90
100 110 120
Coil applied voltage, %V
No. of operations, ×104
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TQ2SA-12V, 5 pcs.
8.-(1) High-frequency characteristics
(Isolation)
8.-(2) High-frequency characteristics
(Insertion loss)
40
Pick-up voltage
x
20
100
50
1.0
0.8
0.6
0.4
0.2
Drop-out voltage
–40 –20
0
20 40 60 80
Ambient
temperature, °C
–20
–40
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
9. Malfunctional shock (single side stable)
Tested sample: TQ2SA-12V, 6 pcs
10.-(1) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 5 pcs.
10.-(2) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 6 pcs.
Deenergized
condition
Energized
condition
X
Z
X'
1000m/s
ON
Z'
Y
10
10
0
ON ON
Y
2
Pick-up voltage
Y'
Pick-up voltage
0
X
Z'
ON
2
2
1000m/s
1000m/s
ON
–10
–10
ON
OFF
OFF OFF
10
10
0
2
2
1000m/s
Z
1000m/s
X'
Drop-out voltage
Drop-out voltage
0
OFF
2
1000m/s
Y'
OFF
–10
–10
OFF
0
1
2
3
4
5
6
0
1
2
3
4
5
6
.039.079.118.157.197.236
.039.079.118.157.197.236
Inter-relay distance , mm inch
Inter-relay distance , mm inch
11. Pulse dialing test
(35 mA 48 V DC wire spring relay load)
Tested sample: TQ2SA-12V, 6 pcs.
Circuit
Change of pick-up and drop-out voltage
(mounting by IRS method)
Change of contact resistance
(mounting by IRS method)
100
90
100
90
80
70
60
50
40
30
20
10
0
80
458 Ω
Pick-up voltage
Drop-out voltage
70
60
50
40
30
20
10
0
Max.
Min.
+
0.08
0.08
µF
TQ-SMD
relay
µF
3
48 V DC
2
Max.
Min.
–
Max.
Min.
458 Ω
Wire spring relay
IRS
10
20
30
40
50
IRS
10
20
30
40
50
No. of operations, ×104
No. of operations, ×104
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
DIMENSIONS (mm inch)
1. Standard PC board terminal and Self-clinching terminal
1) 2 Form C
External dimensions
Standard PC board terminal
PC board pattern (Bottom view)
CAD Data
10.16
.400
10-1.0 dia.
10-.039 dia.
2.54
.100
14
.551
9
.354
(4.75)
(.187)
+0.4
−0.2
5
.197
2.54
+.016
.100
7.62
−.008
.300
3.5
.138
0.5
.020
0.25
.010
0.25
.010
2.54
.100
7.62
.300
Tolerance: 0.1 .004
2-coil latching
Schematic (Bottom view)
1-coil latching
Self-clinching terminal
Single side stable
14
9
.354
(4.75)
(.187)
.551
+0.4
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
5
.197
−0.2
+
−
−
+
+.016
+
−
−.008
3.5
.138
−
+
0.5
0.25
.010
0.25
.010
10
9
8
7
6
10
9
8
7
6
10
9
8
7
6
.020
2.54
.100
7.62
.300
Direction indication
Direction indication
(Reset condition)
Direction indication
(Deenergized condition)
(Reset condition)
General tolerance: 0.3 .012
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
2) 4 Form C
CAD Data
External dimensions
Standard PC board terminal
PC board pattern (Bottom view)
22.86
16-1.0 dia.
.900
16-.039 dia.
5.08
26.7
1.051
9
.354
(4.75)
(.187)
2.54
.200
.100
+0.4
5
.197
−0.2
+.016
−.008
2.54
.100
7.62
3.5
.138
.300
0.5
.020
0.25
.010
0.25
.010
7.62
.300
5.08
.200
2.54
.100
Tolerance: 0.1 .004
2-coil latching
Self-clinching terminal
Schematic (Bottom view)
1-coil latching
26.7
1.051
9
.354
(4.75)
(.187)
Single side stable
+0.4
5
−0.2
+.016
.197
−.008
1
3
4
5
6
7
8
10
1
3
4
5
6
7
8
10
1
3 4 5 6 7 8 10
3.5
.138
+
−
−
+
−
−
+
0.5
.020
0.25
.010
0.25
.010
7.62
.300
5.08
.200
2.54
.100
20 181716151413 11
20 181716151413 11
20 181716151413 11
+
Direction indication
Direction indication
(Reset condition)
Direction indication
(Reset condition)
(Deenergized condition)
General tolerance: 0.3 .012
2. Surface-mount terminal
CAD Data
Type
External dimensions (General tolerance: 0.3 .012)
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
1
2.54
.039
.100
14
9
.551
.354
2.94
.116
0.25
.010
4.9
5.6
.193
9.56
.376
.220
SA type
7.62
.300
11.5 0.5
.453 .020
2.54
.100
0.2
.008
0.5
.020
14
.551
14
1
2.54
.039
.100
9
.551
.354
4.9
0.25
.010
2.94
.116
Max.7.5
.193
.295
SL type
9.56
.376
7.62
.300
11.5 0.5
.453 .020
0.5
2.54
.100
.020
14
1
2.54
.039
.100
9
.551
.354
4.9
0.25
.010
1.84
.072
Max.7.5
.193
.295
SS type
8.46
.333
7.62
.300
9.3 0.5
.366 .020
0.5
2.54
.100
.020
Schematic (Top view)
Single side stable
1-coil latching
2-coil latching
10
9
8
7
6
10
9
8
7
6
5
10
9
8
7
6
−
+
+
−
+
−
−
+
1
2
3
4
5
1
2
3
4
1
2
3
4
5
Direction indication
Direction indication
(Reset condition)
Direction indication
(Deenergized condition)
(Reset condition)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TQ
NOTES
1. Packing style
2. Automatic insertion
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
9.8 N {1 kgf} or less
Orientation (indicates PIN No.1) stripe
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
C
B
A
(1) Tape dimensions
(i) SA type
mm inch
Relay polarity bar
(Z type)
1.75
.069
2.0
4.0
Please chuck the
portion.
1.5+0.1 dia.
.079
.157
0
.059+.004 dia.
14.6
.575
0.4
0
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
.016
11.5
.453
0.2
6.3
12.3
.484
16.0
.630
0.3
.008
24.0
.945
.248
.012
TQ-SMD relays
Tape coming out direction
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
(ii) SL, SS type
mm inch
1.75
.069
14.6
.575
Relay polarity bar
2.0
4.0
1.5+0.1 dia.
(Z type)
.079 .157
0
0.4
.016
.059+.004 dia.
0
11.5
.453
0.2
7.8
.008
.307
16.0
.630
12.3
0.3
24.0
.945
.484
.012
TQ-SMD relays
(10.1
.398)*
Note) *SS type
Tape coming out direction
(2) Dimensions of plastic reel
mm inch
21 dia.
.827 dia.
2.0
.079
80 1 dia.
3.150 .039 dia.
330 2 dia.
12.992 .079 dia.
13 dia.
.512 dia.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
相关型号：
TQ4H-L2-3V-3
Power/Signal Relay, 4PDT, Latched, 0.133A (Coil), 3VDC (Coil), 400mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TQ4H-L2-6V-3
Power/Signal Relay, 4PDT, Latched, 0.067A (Coil), 6VDC (Coil), 400mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TQ4H-L2-9V
Power/Signal Relay, 4PDT, Latched, 0.044A (Coil), 9VDC (Coil), 400mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TQ5121
3V Cellular TDMA/AMPS LNA/mixer Receiver ICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5122
3V Cellular TDMA/AMPS Receiver IC With Power- DownWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5131
3V Cellular Band CDMA/AMPS RFA/Mixer ICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5132
3V Cellular Band CDMA/AMPS RFA/Mixer ICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5135
3V Cellular CDMA/AMPS LNA/Mixer Receiver ICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5139
2.8V SiGe Dual-Mode CDMA Rx ReceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5622
3V PCS Receiver IC With Power- DownWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5631
3V PCS Band CDMA RFA/Mixer ICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
TQ5633
3V PCS Band CDMA RFA/Mixer IC(WIRELESS COMMUNICATIONS DIVISION)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRIQUINT
©2020 ICPDF网 联系我们和版权申明