TX2SA-3V-Z-1 [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 3VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT;
| 型号： | TX2SA-3V-Z-1 |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 3VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总7页 (文件大小：175K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TESTING
New pin layout (LT type)
added. Best seller with
broad lineup and AC 2000 V
breakdown voltage.
TX RELAYS
3. Nominal operating power: High
sensitivity of 140mW
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
8. Sealed construction allows
automatic washing.
9. A range of surface-mount types is
also available
SA: Low-profile surface-mount
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 140 mW (minimum operating
power of 79 mW) has been achieved.
4. High contact capacity: 2 A 30 V DC
5. Compact size
terminal type
Compliance with RoHS Directive
15.0(L) × 7.4(W) × 8.2(H) .591(L) ×
.291(W) × .323(H)
SL: High connection reliability surface-
mount terminal type
6. The use of gold-clad twin crossbar
contacts ensures high contact
reliability.
*We also offer a range of products
with AgPd contacts suitable for use
in low level load analog circuits
(Max. 10V DC 10 mA).
SS: Space saving surface-mount
terminal type
FEATURES
1. 2,000 V breakdown voltage between
contact and coil
TYPICAL APPLICATIONS
The body block construction of the coil
that is sealed at formation offers a high
breakdown voltage of 2,000 V between
contact and coil, and 1,000 V between
open contacts.
2. Outstanding surge resistance.
Surge breakdown voltage between
open contacts:
1. Communications (xDSL,
Transmission)
*SX relays designed for low level
loads are also available.
2. Measurement
3. Security
4. Home appliances, and audio/visual
equipment
5. Automotive equipment
6. Medical equipment
7. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
1,500 V 10×160µ sec. (FCC part 68)
Surge breakdown voltage between
contact and coil:
2,500 V 2×10µ sec. (Bellcore)
ORDERING INFORMATION
TX 2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal type or self-clinching terminal type
SA: SA type
SL: SL type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
LT: 2 coil latching
Terminal shape
Nil: Standard PC board terminal or surface-mount terminal
H: Self-clinching terminal
Nominal coil voltage (DC)*
1.5, 3, 4.5, 5, 6, 9, 12, 24, 48V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
TYPES
1. Standard PC board terminal
Single side stable
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
Part No.
1.5V DC
3V DC
TX2-1.5V
TX2-3V
TX2-L-1.5V
TX2-L-3V
TX2-L-4.5V
TX2-L-5V
TX2-L-6V
TX2-L-9V
TX2-L-12V
TX2-L-24V
—
TX2-L2-1.5V
TX2-L2-3V
TX2-L2-4.5V
TX2-L2-5V
TX2-L2-6V
TX2-L2-9V
TX2-L2-12V
TX2-L2-24V
—
TX2-LT-1.5V
TX2-LT-3V
TX2-LT-4.5V
TX2-LT-5V
TX2-LT-6V
TX2-LT-9V
TX2-LT-12V
TX2-LT-24V
—
4.5V DC
5V DC
TX2-4.5V
TX2-5V
2 Form C
6V DC
TX2-6V
9V DC
TX2-9V
12V DC
24V DC
48V DC
TX2-12V
TX2-24V
TX2-48V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2. self-clinching terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2-H-1.5V
TX2-H-3V
TX2-L-H-1.5V
TX2-L-H-3V
TX2-L-H-4.5V
TX2-L-H-5V
TX2-L-H-6V
TX2-L-H-9V
TX2-L-H-12V
TX2-L-H-24V
—
TX2-L2-H-1.5V
TX2-L2-H-3V
TX2-L2-H-4.5V
TX2-L2-H-5V
TX2-L2-H-6V
TX2-L2-H-9V
TX2-L2-H-12V
TX2-L2-H-24V
—
TX2-LT-H-1.5V
TX2-LT-H-3V
TX2-LT-H-4.5V
TX2-LT-H-5V
TX2-LT-H-6V
TX2-LT-H-9V
TX2-LT-H-12V
TX2-LT-H-24V
—
4.5V DC
5V DC
TX2-H-4.5V
TX2-H-5V
2 Fom C
6V DC
TX2-H-6V
9V DC
TX2-H-9V
12V DC
24V DC
48V DC
TX2-H-12V
TX2-H-24V
TX2-H-48V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
3. Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2Sꢀ-1.5V
TX2Sꢀ-3V
TX2Sꢀ-4.5V
TX2Sꢀ-5V
TX2Sꢀ-6V
TX2Sꢀ-9V
TX2Sꢀ-12V
TX2Sꢀ-24V
TX2Sꢀ-48V
TX2Sꢀ-L-1.5V
TX2Sꢀ-L-3V
TX2Sꢀ-L-4.5V
TX2Sꢀ-L-5V
TX2Sꢀ-L-6V
TX2Sꢀ-L-9V
TX2Sꢀ-L-12V
TX2Sꢀ-L-24V
—
TX2Sꢀ-L2-1.5V
TX2Sꢀ-L2-3V
TX2Sꢀ-L2-4.5V
TX2Sꢀ-L2-5V
TX2Sꢀ-L2-6V
TX2Sꢀ-L2-9V
TX2Sꢀ-L2-12V
TX2Sꢀ-L2-24V
—
TX2Sꢀ-LT-1.5V
TX2Sꢀ-LT-3V
TX2Sꢀ-LT-4.5V
TX2Sꢀ-LT-5V
TX2Sꢀ-LT-6V
TX2Sꢀ-LT-9V
TX2Sꢀ-LT-12V
TX2Sꢀ-LT-24V
—
4.5V DC
5V DC
2c
6V DC
9V DC
12V DC
24V DC
48V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2Sꢀ-1.5V-Z
TX2Sꢀ-3V-Z
TX2Sꢀ-4.5V-Z
TX2Sꢀ-5V-Z
TX2Sꢀ-6V-Z
TX2Sꢀ-9V-Z
TX2Sꢀ-12V-Z
TX2Sꢀ-24V-Z
TX2Sꢀ-48V-Z
TX2Sꢀ-L-1.5V-Z
TX2Sꢀ-L-3V-Z
TX2Sꢀ-L-4.5V-Z
TX2Sꢀ-L-5V-Z
TX2Sꢀ-L-6V-Z
TX2Sꢀ-L-9V-Z
TX2Sꢀ-L-12V-Z
TX2Sꢀ-L-24V-Z
—
TX2Sꢀ-L2-1.5V-Z
TX2Sꢀ-L2-3V-Z
TX2Sꢀ-L2-4.5V-Z
TX2Sꢀ-L2-5V-Z
TX2Sꢀ-L2-6V-Z
TX2Sꢀ-L2-9V-Z
TX2Sꢀ-L2-12V-Z
TX2Sꢀ-L2-24V-Z
—
TX2Sꢀ-LT-1.5V-Z
TX2Sꢀ-LT-3V-Z
TX2Sꢀ-LT-4.5V-Z
TX2Sꢀ-LT-5V-Z
TX2Sꢀ-LT-6V-Z
TX2Sꢀ-LT-9V-Z
TX2Sꢀ-LT-12V-Z
TX2Sꢀ-LT-24V-Z
—
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
48V DC
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please add “-1” to the end of the part number for AgPd contacts (low level load).
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
RATING
1. Coil data
1) Single side stable
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
93.8mA
46.7mA
31mA
16Ω
64.3Ω
145Ω
178Ω
257Ω
579Ω
1,028Ω
4,114Ω
4.5V DC
5V DC
28.1mA
23.3mA
15.5mA
11.7mA
5.8mA
150%V of
nominal voltage
140mW
270mW
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
6V DC
9V DC
12V DC
24V DC
120%V of
nominal voltage
48V DC
5.6mA
8,533Ω
2) 1 coil latching
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
20mA
22.5Ω
90Ω
202.5Ω
250Ω
360Ω
810Ω
4.5V DC
5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
100mW
6V DC
16.7mA
11.1mA
8.3mA
9V DC
12V DC
24V DC
1,440Ω
5,760Ω
4.2mA
3) 2 coil latching (L2, LT)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F
Set coil
133.9mA
66.7mA
44.5mA
40mA
Reset coil
133.9mA
66.7mA
44.5mA
40mA
Set coil
11.2Ω
45Ω
101.2Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
Reset coil
11.2Ω
45Ω
101.2Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
Set coil
Reset coil
1.5V DC
3V DC
4.5V DC
5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
200mW
200mW
6V DC
33.3mA
22.2mA
16.7mA
8.3mA
33.3mA
22.2mA
16.7mA
8.3mA
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
Initial contact resistance, max.
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Contact
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load)
220V DC
Max. switching current
Min. switching capacity (Reference value)*1
Standard contact: 2 A, AgPd contact: 1 A
10µA 10mV DC
Rating
Single side stable
140 mW (1.5 to 24 V DC), 270 mW (48 V DC)
100 mW (1.5 to 24 V DC)
200 mW (1.5 to 24 V DC)
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA)
2,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10×160µs) (FCC Part 68)
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Between open contacts
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Between open contacts
Between contacts and coil
Surge breakdown
voltage (Initial)
Electrical
2,500 V (2×10µs) (Telcordia)
characteristics
Max. 50°C
Temperature rise (at 20°C 68°F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), 5×105 (1 A 30 V DC resistive) (at 20 cpm)
Expected life
Ambient temperature: –40°C to +85°C (up to 24 V coil) –40°F to +185°F (up to 24 V coil)
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
[–40°C to +70°C (48 V coil) –40°F to +158°F (48 V coil)];
Conditions
Unit weight
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (AgPd contact type or SX relays are available for low level load switching [10V DC, 10mA max. level])
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating speed: 180 cpm
100
3.0
2.0
90
80
100
50
Pick-up voltage
Max.
Min.
70
60
50
40
30
20
10
0
DC resistive load
1.0
30
20
30V DC
resistive load
0.5
0.4
0.3
Drop-out voltage
10
0
0.2
Max.
Min.
0
20 30 50
100
200 300
10
100
1,000
10,000
1.0
2.0
No. of operations, ×104
Contact voltage, V
Switching current, A
4. Electrical life (2A 30V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TX2-5V, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
100
Tested sample: TX2-5V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 85°C 185°F
Change of contact resistance
100
70
+25°C +77°F
+85°C +185°F
90
90
80
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
80
Pick-up voltage
Max.
70
60
50
40
30
20
10
0
Min.
2A
2A
Max.
Min.
Drop-out voltage
Max.
Min.
0A
0A
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
100 110 120 130 140 150
Coil applied voltage, %
No. of operations, ×104
No. of operations, ×104
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
5-(2). Coil temperature rise
Tested sample: TX2-48V, 6 pcs.
6-(1). Operate and release time (with diode)
Tested sample: TX2-5V, 10 pcs.
6-(2). Operate and release time (without diode)
Tested sample: TX2-5V, 10 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
5
5
70
+25°C +77°F
Operate time
Release time
Operate time
Release time
+70°C +158°F
60
50
40
30
20
10
0
4
4
Max.
Max.
2A
Min.
3
Min.
3
2A
0A
0A
Max.
2
2
Min.
Max.
Min.
1
0
1
0
70
80
90
100 110 120
70
80
90
100 110 120
100 110 120 130 140 150
Coil applied voltage, %
Coil applied voltage, %V
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TX2-5V, 5 pcs.
8-(1). High frequency characteristics
(Isolation)
8-(2). High frequency characteristics
(Insertion loss)
Tested sample: TX2-12V, 2 pcs.
Tested sample: TX2-12V, 2 pcs.
40
Drop-out
voltage
x
x
20
100
50
1.0
0.8
0.6
0.4
0.2
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
–20
–40
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
9 Malfunctional shock (single side stable)
Tested sample: TX2-5V, 6 pcs.
10-(1). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
10-(2). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
Deenergized condition
X
Z
X'
ON
Z'
Y
Energized condition
5
0
5
ON ON
1000m/s2
Y
Pick-up voltage
Pick-up voltage
0
Y'
X
Z
1000m/s2
2
ON
1000m/s
–5
–5
ON
ON
OFF
OFF OFF
5
0
5
1000m/s2
X'
2
1000m/s
Z'
Drop-out voltage
Drop-out voltage
0
1000m/s2
Y'
OFF
–5
–5
OFF
OFF
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
.079.157.236.315.394
Inter-relay distance , mm inch
Inter-relay distance , mm inch
11. Pulse dialing test
Tested sample: TX2-5V, 6 pcs.
(35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
80
70
60
50
40
30
20
10
0
100
90
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
40
458 Ω
+
0.08
µF
0.08
µF
Max.
Min.
4
3
48V DC
TX
30
20
10
0
Drop-out voltage
–
Max.
Min.
458 Ω
Wire spring relay
10
20
30
40
50
10
20
30
40
50
No. of operation, ×104
No. of operations, ×104
Note: Data of surface-mount type are the same as those of PC board terminal type.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
DIMENSIONS (mm inch)
1. Standard PC board terminal and Self clinching terminal
Single side stable and 1 coil latching type
2 coil latching type (L2, LT)
External dimensions
CAD Data
External dimensions
Standard PC board terminal
Standard PC board terminal
15.00
.591
7.40
.291
15.00
.591
7.40
.291
0.65
.026
0.65
.026
8.20
.323
8.20
.323
0.50
.020
0.50
.020
0.25
.010
0.25
.010
3.50
.138
5.08
.200
1.15 5.08
.045 .200
2.54
.100
1.15 5.08
.045 .200
2.54
.100
3.50
.138
5.08
.200
Self clinching terminal
Self clinching terminal
15.00
.591
7.40
.291
15.00
.591
7.40
.291
0.65
0.65
8.20
.026
.323
8.20
.026
.323
0.50
.020
0.50
0.25
.010
.020
(1.15)
(.045)
0.25
.010
3.50
5.08
.200
2.54
.100
1.15 5.08
.045 .200
1.15 5.08
.045 .200
2.54
.100
3.50 5.08
.138
.138
.200
General tolerance: 0.3 .012
General tolerance: 0.3 .012
PC board pattern
(Bottom view)
Schematic (Bottom view)
PC board pattern
(Bottom view)
Schematic (Bottom view)
2 coil latching (L2)
2 coil latching (LT)
Single side stable
1 coil latching
10.16
12.7
1
3
4
5
6
1
3
4
5
8
6
7
1
3
4
5
1
3
4 5
.400
2.54
.500
2.54
+
+
–
+
–
–
+
.100
.100
+
–
5.08
.200
5.08
.200
+
12
–
7
–
10
9
8
12
10
9
12
10
9
8
12
10 9 8
8-1.0 dia.
10-1.0 dia.
Direction indication
Direction indication
Direction indication
Direction indication
8-.039 dia.
10-.039 dia.
(Reset condition)
(Reset condition)
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
Tolerance: 0.1 .004
2. Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Single side stable and
1 coil latching type
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Type
Single side stable and
2 coil latching type (L2, LT)
1 coil latching type
2 coil latching type (L2, LT)
5.08
.200
15
7.4
15
7.4
2.54
.100
5.08
.200
2.54
.100
.591
.291
.591
.291
1
1
3.16
.124
.039
3.16
.124
.039
8.2
8.4
8.2
.323
8.4
.323
.331
.331
SA type
0.25
.010
0.25
.010
7.24
.285
7.24
.285
0.65
.026
0.65
.026
5.08
.200
9.4 0.5
5.08
.200
9.4 0.5
0.5
0.5
.020
5.08
.200
.020
5.08
.200
2.54
.100
2.54
.100
.370 .020
.370 .020
15
7.4
15
7.4
5.08
.200
2.54
.100
5.08
.200
.591
.291
.591
.291
2.54
.100
1
1
3.16
.124
.039
3.16
.124
.039
8.2
8.2
Max.10
Max.10
.394
.323
.323
.394
SL type
0.25
.010
0.25
.010
7.24
.285
7.24
.285
0.65
.026
0.65
.026
5.08
.200
9.4 0.5
5.08
.200
9.4 0.5
0.5
0.5
.020
.020
5.08
.200
5.08
.200
2.54
.100
2.54
.100
.370 .020
.370 .020
15
15
7.4
7.4
2.54
.100
.591
.591
5.08
.200
.291
.291
5.08
.200
2.54
.100
1
2.16
.085
.039
1
2.16
8.2
8.2
Max.10
Max.10
.085.039
.323
.323
.394
.394
SS type
0.25
.010
0.25
.010
6.24
.246
6.24
.246
0.65
.026
0.65
.026
5.08
.200
7.4 0.5
5.08
.200
7.4 0.5
0.5
0.5
.020
.020
5.08
.200
5.08
.200
2.54
.100
2.54
.100
.291 .020
.291 .020
Schematic (Top view)
Single side stable
1 coil latching
2 coil latching (L2)
2 coil latching (LT)
12
10
9
8
12
10
9
8
12
10
9
8
7
+
–
–
–
+
–
+
12 10
9
8
7
–
–
6
+
+
+
1
3
4
5
1
3
4
5
1
3
4
5
1
3
4
5
6
Direction indication
Direction indication
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
(Reset condition)
(Reset condition)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
NOTES
1. Packing style
2. Automatic insertion
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Orientation (indicates PIN No.1) stripe
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
C
B
A
(1) Tape dimensions
(i) SA type
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
1.75
.069
0
0.4
2.0
4.0
Please chuck the
portion.
.016
.079 .157
C
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
A
B
11.5
.453
15.5
.610
10.0 .D394
16.0
.630
0.3
24.0
9.2 0.2
Relays
.012
.945
.362 .008
Tape coming out direction
(ii) SL type
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
mm inch
1.5+0.1 dia.
0
Relay polarity bar
(Z type)
.059+.004 dia.
1.75
.069
0
0.4
2.0
4.0
.016
.079 .157
11.5
.453
15.5
.610
0.3
16.0
.630
24.0
.945
.012 10.8 0.2
.425 .008
Relays
10.0
.394
Tape coming out direction
(iii) SS type
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
2.0
4.0
1.75
.069
0
0.4
.079 .157
.016
11.5
.453
15.5
.610
0.3
16.0
.630
8.0 24.0
.01210.8 0.2
.425 .008
Relays
.945
.315
Tape coming out direction
(2) Dimensions of plastic reel
mm inch
2.0
.079
380 dia.
13 dia.
.512 dia.
21 dia.
.827 dia.
14.961 dia.
80 dia.
3.150 dia.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
相关型号：
TX2SA-4.5V-1
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-1-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-1-Z
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-TH
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-TH-X
Power/Signal Relay, 2 Form C, DPDT, 6.75VDC (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, Random, AC/DC Output
PANASONIC
TX2SA-4.5V-TH-Z
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-Z-1
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-48V-1
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.006A (Coil), 48VDC (Coil), 270mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明