8-1202146-3 [PANDUIT]

IN-LINE SPLICE SEALING SYSTEM, 1 TO 1 NICKEL PLATED CRIMP, 200deg.C; 内嵌式接合密封系统， 1对1镀镍卷曲200deg.C


型号：	8-1202146-3
厂家：	PANDUIT CORP.
描述：	IN-LINE SPLICE SEALING SYSTEM, 1 TO 1 NICKEL PLATED CRIMP, 200deg.C 内嵌式接合密封系统， 1对1镀镍卷曲200deg.C
文件：	总2页 (文件大小：46K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SPECIFICATION CONTROL DRAWING

I.D.*

a min

b max

Crimp Splicer

Product

Name

Prod.

Rev:

max

Color

Code

øA

øB

2.16 (0.085)

0.64 (0.025)

2.79 (0.110)

0.64 (0.025)

4.32 (0.170)

0.64 (0.025)

1.27 (0.050)

1.14 (0.045)

1.75 (0.069)

1.63 (0.064)

2.60 (0.102)

2.46 (0.097)

2.03 (0.080)

1.91 (0.075)

2.70 (0.106)

2.57 (0.101)

3.89 (0.153)

3.73 (0.147)

12.95 (0.510)

12.45 (0.490)

14.86 (0.585)

14.35 (0.565)

14.86 (0.585)

14.35 (0.565)

6.22 (0.245)

5.72 (0.225)

7.11 (0.280)

6.60 (0.260)

7.11 (0.280)

6.60 (0.260)

0.38

(0.015)

0.51

(0.020)

1.27

D-200-82

D-200-83

D-200-84

Red

Blue

Yellow

(0.050)

* I.D: a- As received; b- After unrestricted recovery thru meltable insert.

Product

Name

D-200-82

D-200-83

D-200-84

MIL Spec

Equivalent Size

M81824/1-1

M81824/1-2

M81824/1-3

Wire

Range

26-20

20-16

16-12

Wgt. Lbs/Mpc

max

1.02

1.61

2.72

MATERIALS

1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer.

2. MELTABLE RINGS: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue.

3. CRIMP SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B75.

Plating: Nickel per SAE AMS-QQ-N-290.

Color Code: See table.

TITLE:

Tyco Electronics Corporation

IN-LINE SPLICE SEALING SYSTEM, 1 TO 1

NICKEL PLATED CRIMP, 200deg.C

DOCUMENT NO.:

300 Constitution Drive,

Menlo Park, CA. 94025, U.S.A.

Raychem

Unless otherwise specified dimensions are in millimeters.

[Inches dimensions are shown in brackets]

D-200-82/-83/-84

TOLERANCES:

0.00 N/A

0.0 N/A

ANGLES: N/A

Tyco Electronics reserves the right to amend

this drawing at any time. Users should

evaluate the suitability of the product for their

application.

PROD. REV.:

DOC. ISSUE:

DATE:

ROUGHNESS IN

MICRON

SEE TABLE

07-Nov-05

0 N/A

PREPARED BY:

mforonda

DCR NUMBER:

D050442

REPLACES:

---

CAGE CODE :

06090

SCALE:

---

SIZE:

SHEET:

1 of 2

If this document is printed it becomes uncontrolled. Check for the latest revision.

SPECIFICATION CONTROL DRAWING

APPLICATION

1. These parts are designed to provide an immersion resistant in-line splices of 1 to 1 wires falling within the size

range listed, and having nickel-plated conductors and insulations rated for at least 135°C.

2. Parts will meet all performance requirements of SAE AS-81824 when installed as outlined below with the

following modifications:

-Heat ageing test temperature of 200ºC.

-Thermal shock maximum temperature of 200ºC.

3. Acceptance sampling shall be in accordance with Paragraph 4.6.1 of SAE AS-81824.

4. Packing and packaging shall be in accordance with Section 5, Level C, of SAE AS-81824.

5. This document takes precedence over documents referenced herein.

ASSEMBLY PROCEDURE:

1. Slide sealing sleeve onto one of the wires to be spliced.

2. Strip wires 7.95 [5/16”] to 8.73 [11/32”].

3. Insert one wire into barrel of crimp splicer and crimp using a Raychem AD-1377 crimp tool.

Repeat for the other wire.

4. Center sealing sleeve over the splice.

5. Apply heat, using an approved heat source, first to one of the inserts and then the other. Heat should be applied

until insert melts and flows axially along the wire.

Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets]

DOCUMENT NO.:

DCR NUMBER:

PROD. REV.:

DOC. ISSUE:

DATE:

SHEET:

SEE TABLE

7-Nov-05

2 of 2

D050442

D-200-82/-83/-84

If this document is printed it becomes uncontrolled. Check for the latest revision.

相关型号：