FSTMM50RD [PANDUIT]
ST* OPTI-CRIMP ® Fiber Optic Connector â Pre-polished Crimp;型号: | FSTMM50RD |
厂家: | PANDUIT CORP. |
描述: | ST* OPTI-CRIMP ® Fiber Optic Connector â Pre-polished Crimp |
文件: | 总2页 (文件大小:268K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
s p e c i f i c a t i o n s
ST* fiber optic connectors shall be compliant
with TIA FOCIS-2. ST* connectors shall
contain a factory terminated pre-polished
multimode fiber, requiring no field polishing
and no adhesive. The fiber shall terminate in a
2.5mm ferrule and have a typical insertion
loss of 0.3dB (62.5/125µm) or 0.35dB
(50/125µm) per connector.
NETWORK CONNECTIVITY GROUP
SPEC SHEET
ST* OPTI-CRIMP ® Fiber Optic Connector — Pre-polished Crimp
ST* OPTI-CRIMP
Multimode Connectors
t e c h n i c a l i n f o r m a t i o n
Fiber compatibility:
Fiber cable type:
Ferrule type:
62.5/125µm and 50/125µm multimode versions available
Tight-buffered cable only (3.0mm jacketed or 900µm)
Zirconia ceramic with a pre-polished fiber stub
0.3dB typical (62.5/125µm), 0.35dB typical (50/125µm)
Greater than 20dB
62.5/125µm
black boot:
62.5/125µm
red boot:
50/125µm
black boot:
FSTMMBL
FSTMMRD
FSTMM50BL
FSTMM50RD
Insertion loss:
Return loss:
50/125µm
red boot:
ST* Adapter Modules with
Phosphor Bronze Split Sleeve
Simplex:
CMST**
k e y f e a t u r e s a n d b e n e f i t s
ST* Adapter Modules with
Zirconia Ceramic Split Sleeve
Pre-polished fiber stub
Eliminates polishing steps, speeding installation
Simplex:
CMSTZ**
VFL verification during
crimp process
Provides installer with a visual signal when optimal
continuity is made and the crimp step can be performed
Multimode Patch Cords
and Pigtails
Mechanical crimp
cable retention
Consistently provides higher than industry standard cable
retention; requires no adhesive, speeding installation
Duplex ST* to ST*:
F^D2-2M‡
Simplex ST* to ST*: F^S2-2M‡
Simplex 900µm
buffered ST* pigtail: F^B2-NM‡
Proven 2.5mm
Uses standard termination tools and procedures; provides
strength and reliability
ceramic ferrules
Robust design
Protects fibers from mechanical and environmental stress
Duplex ST* to SC:
Duplex FJ® plug
to ST*:
F^D2-3M‡
FOCIS-2 compliant
Ensures intermatability with all FOCIS-2 compliant
components
F^D6P-2M‡
^Available in 62.5/125µm (6) and 50/125µm (5).
Exceeds TIA/EIA-568-B.3
Network reliability assured as defined by TIA
‡Patch cords are available in 1, 2, 3, 5 and 10
meter lengths, and pigtails are available in 1, 2
and 3 meter lengths.
OPTI-CRIMP Termination Tooling
Termination kit:
To upgrade from FJKITG, purchase FJQCVR
fiber cleaver tool and FVFLKIT visual fault
locator kit.
FJMVKIT
a p p l i c a t i o n s
The ST* OPTI-CRIMP Fiber Optic Connector
improves an industry standard design.
Elimination of end face polishing and
adhesive provides for easier, faster
installation, especially in remote areas and
confined spaces. This reduces installation
time over standard field polish ST* connectors
by 50%. ST* Fiber Optic Connectors are
widely used in fiber optic backbone and
horizontal applications for high-speed data
transmissions.
To upgrade from FJMKIT, purchase FVFLKIT
visual fault locator kit.
**Substitute for Colors:
EI = Electric Ivory
BU = Blue
BL = Black
IW = Off White
AW= Arctic White
installer tips
Terminate on tight-buffered cable only.
Always use FVFL Visual Fault Locator
during termination.
*ST is a registered trademark of Lucent Technologies.
Visit our website at: www. panduit. com/ncg
ST* OPTI-CRIMP ® Fiber Optic Connector — Pre-polished Crimp
Standards Compliant Connector Performance
TIA
455
Test Procedure and
Description
Typical Performance
TIA/EIA-568-B.3 Required Performance
Apply 1.1lb. (jacketed) or .5lb (buffered) load thru 180° for 100 cycles;
0.75dB maximum insertion loss
1
2
4
< 0.1dB additional loss
< 0.1dB additional loss
< 0.1dB additional loss
Flex
Impact
8 drops from 1.8m
0.75dB maximum insertion loss
60°C for 4 days;
0.75dB maximum insertion loss
High Temperature
Humidity
40°at 95% RH for 4 days;<0.4dB additional loss
0.75dB maximum. insertion loss
5
6
< 0.1dB additional loss
Apply 11.24 lbs. (jacketed) or 0.5lb (buffered) load for 5 seconds, 0° angle;
4.4lb (jacketed) 0.5lb (buffered) at 90°<0.5dB additional loss 0.75dB
maximum insertion loss
Cable Retention
(Buffered)
< 0.1dB additional loss
< 0.1dB additional loss
(Jacketed)
Mate/unmate connectors (500 cycles)
0.75dB maximum insertion loss
21
Durability
0.3dB typical (62.5/125µm),
0.35dB typical (50/125µm)
0.75dB maximum insertion loss
Insertion Loss
34
36
Apply 3.4lb (jacketed) 0.5lb (buffered) load, 10 cycles from +90° to -90°;
0.75dB maximum insertion loss
< 0.1dB additional loss
>20dB
Twist
Return Loss
Coupling Strength
107
185
20dB minimum
Pull plug from jack, 7.4lb load for 5 seconds at 0°;
0.75db maximum insertion loss
< 0.1dB additional loss
0°C for 4 days; <0.3dB additional loss
0.75dB maximum insertion loss
Low Temperature
< 0.1dB additional loss
188
NOTE: Multimode tests performed at 850 and 1300nm.
3mm Boot
900µm Boot
2.36
[59.94]
2.04
[51.81]
*ST is a registered trademark of Lucent Technologies.
Dimensions are in inches (Dimensions in brackets are in millimeters)
For a copy of PANDUIT product warranties,
log on to www.panduit.com/warranty
For a full line catalog (SA-NC10CB01A), email us at
csteam@panduit.com or call Customer Service at 800-777-3300.
PANDUIT CORP.
Tinley Park, Illinois 60477-3091
Customer Service: 800-777-3300
Technical Support: 866-405-6654
Email: ncginfo@panduit.com
Contact your local authorized PANDUIT
distributor for pricing. For your local
Sales Office call 800-777-3300
NETWORK CONNECTIVITY GROUP
Website: www.panduit.com/ncg
PANDUIT CANADA
PANDUIT EUROPE LTD.
London, UK
Phone: 44 208-601-7200
PANDUIT ASIA PACIFIC PTE. LTD. PANDUIT JAPAN
PANDUIT LATIN AMERICA
Jalisco, Mexico
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
Phone: (61) 3-9794 9020
Markham, Ontario
Republic of Singapore
Phone: (65) 6379 6700
Tokyo, Japan
Phone: 800-777-3300
Phone: (81) (3) 3767-7011 Phone: (52) (333) 666-2501
WW-FBSP04
©PANDUIT Corp. 2003
ALL RIGHTS RESERVED
Printed in U.S.A.
07/2003
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明