L-T650WDT [PARALIGHT]
SURFACE MOUNT DEVICE LED;型号: | L-T650WDT |
厂家: | PARA LIGHT ELECTRONICS CO., LTD. |
描述: | SURFACE MOUNT DEVICE LED |
文件: | 总17页 (文件大小:862K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PARA LIGHT ELECTRONICS CO., LTD.
4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan
Tel: 886-2-2225-3733
Fax: 886-2-2225-4800
http://www.para.com.tw
E-mail: para@para.com.tw
DATA SHEET
[
[
PART NO.: L-T650WDT
REV: B / 1
CUSTOMER’S APPROVAL : _______________
DCC : ____________
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE 1 of 17
PARA-FOR-065
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò
Features
¤
¤
¤
¤
¤
¤
Top view, Wide view angle, White color PLCC 2 package SMD LED .
EIA STD package, packing in 8mm tape on 7" diameter reels (ANSI/EIA-481-B-2001).
Compatible with automatic Pick & Place equipment.
Compatible with IR Reflow soldering and TTW soldering.
Pb free product and acceptable lead-free process!
Meet RoHS Green Product.
ò
Application
¤
¤
Backlighting (LCD, Switches, keys, displays, illuminated advertising)
Emergency lighting / Signal and symbol luminaries.
ò
Package Outline Dimensions
TOP VIEW
SIDE VIEW
3.00
C0.45
POLARITY
+
-
FRONT VIEW
BACK VIEW
2.70
1.90
50
Notes:
1. All dimensions are in millimeters.
$
2. Tolerance is
0.10mm (.004") unless otherwise noted.
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
2 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò Chip Materials
¤
¤
¤
Dice Material : InGaN
Light Color : White
Lens Color : Light Yellow Diffused.
ò Absolute Maximum Ratings(Ta=25R)
ꢀ
Symbol
PD
Parameter
Power Dissipation
Rating
75
Unit
mW
Peak Forward Current
IPF
100
mA
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Reverse Voltage
IF
20
5
mA
V
VR
ESD
Topr
Tstg
Note A :
Electrostatic Discharge Threshold (HBM)Note A
1000
V
R
R
Operating Temperature Range
-40 ~ + 85
-40 ~ + 85
Storage Temperature Range
HBM : Human Body Model. Seller gives no other assurances regarding the ability of to
withstand ESD.
ò Electro-Optical Characteristics (Ta=25R)
Parameter
Luminous Intensity
Viewing Angle
Symbol
IV
E
1/2
Min.
1000
Typ.
1200
120
Max.
Unit
mcd
Deg
Test Condition
IF=20mA
Note 2
2
CIE Chromaticity
CIE Chromaticity
Forward Voltage
Reverse Current
x
0.31
0.32
3.20
IF=20mA
y
VF
IR
3.60
10
V
IF = 20mA
VR = 5V
I
A
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
3 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
E
2.
1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. Caution in ESD :
Static Electricity and surge damages the LED. It is recommended use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
4. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
ò Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
4 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò Typical Electro-Optical Characteristics Curves
(25R Ambient Temperature Unless Otherwise Noted)
50
40
30
20
Ta=25°C
Ta=25°C
10
0
0
20
40
60
80 100
Ambient Temperature Ta(°C
)
Fig. Relative Luminous Intensity vs.Forward Current
200
Fig.2 Forward Current Derating Curve
Fig.1 Forward Current vs.Forward Voltage
0° 10° 20°
2
30°
Ta=25°C
IFP=20mA
100
1
40°
1.0
50
0.5
0.9
50°
30
20
0.8
60°
0.2
0.1
70°
80°
90°
0.7
10
1
20
Ambient Temperature Ta(°C
5
10
50 100
0.5 0.3 0.1 0.2 0.4 0.6
-40
-20
20 40
80 100
0
)
Ambient Temperature Ta(°C
)
Fig.4 Luminous Intensity vs.Ambient Temperature
Fig.6 Forward Current Derating Curve
Fig.5 Spatial Distribution
Ta=25°C
IFP=60mA
IFP=20mA
IFP=5mA
IFP=20mA
1mA
5mA
-30°C
0°C
20mA
50mA
25°C
85°C 50
100mA
x
x
Ambient Temperature Ta(°C
)
Fig.8 Ambient Temperature vs.Chromaticity Coordinate
Fig.7 Ambient Temperature vs.Forward Voltage
Fig.9 Forward Current vs.Chromaticity Coordinate
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
5 of 17
PARA-FOR-068
ꢀ
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò
Bin Code List
Luminous Intensity(IV),Unit:mcd@20mA
Iv bin code(main code) Iv bin code(sub code-2)
Forward Voltage(VF),
Unit:V@20mA
Bin Code MIN
Bin Code
P22
MIN
1000
1250
1550
Max
1250
1550
1900
Bin Code
H091
H092
H101
H102
H103
H111
H112
H113
H121
H122
H123
H131
H132
H133
H141
H142
H143
H144
MIN
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
Max
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
Max
3.00
3.10
3.20
3.30
3.40
3.50
3.60
14
15
16
17
18
19
20
2.90
3.00
3.10
3.20
3.30
3.40
3.50
P23
P24
Iv bin code(subcode-1)
Bin Code
H09
MIN
1000
1100
1250
1400
1550
1700
Max
1100
1250
1400
1550
1700
1900
H10
H11
H12
H13
H14
Tolerance of each bin are
ꢁ
1
ꢂ
%
Tolerance of each bin are
ꢁ
0.1V.
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
6 of 17
PARA-FOR-068
ꢀ
SURFACE MOUNT DEVICE LED
REV: B / 1
Part No. : L-T650WDT
Color Rank (CIE chromaticity x , y) @ 20mA
Rank a31
Rank b61
0.307
x
y
0.270 0.264 0.275 0.279
0.260 0.267 0.281 0.276
Rank a32
x
y
0.308
0.308
0.318
0.326
0.319
0.318
0.315
Rank b62
0.318
x
y
0.279 0.275 0.287 0.290
0.276 0.281 0.295 0.288
Rank a33
x
y
0.319
0.318
0.330
0.339
0.330
0.330
0.326
Rank b63
0.319
x
y
0.288 0.279 0.290 0.296
0.264 0.276 0.288 0.276
Rank a34
x
y
0.320
0.305
0.330
0.330
0.330
0.318
0.318
Rank b64
0.308
x
y
0.280 0.270 0.279 0.288
0.250 0.260 0.276 0.264
x
y
0.311
0.294
0.319
0.318
0.320
0.305
0.308
Rank b51
Rank b73
0.296
x
y
0.290 0.287 0.300 0.302
0.288 0.295 0.308 0.302
Rank b52
x
y
0.299
0.268
0.306
0.288
0.308
0.279
0.276
Rank b74
0.288
x
y
0.302 0.300 0.307 0.308
0.302 0.308 0.315 0.308
Rank b53
x
y
0.291
0.257
0.296
0.276
0.299
0.268
0.264
Rank b83
0.311
x
y
0.306 0.302 0.308 0.311
0.288 0.302 0.308 0.294
Rank b54
x
y
0.313
0.285
0.320
0.305
0.321
0.294
0.294
Rank b84
0.306
x
y
0.296 0.290 0.302 0.306
0.276 0.288 0.302 0.288
x
y
0.308
0.279
0.311
0.294
0.313
0.285
0.288
ꢀ
\
ꢀ
Measurement of Color coordinates : +/- 0.01ꢀ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
7 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò
C.I.E Chromaticity Diagram
C.I.E. 1931 Chromaticity Diagram
y
x
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
8 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò Label Explanation
CUS. PART NO: To be denominated.
CUSTOMER: To be denominated.
PART NO: Refer to P17
IV--- Luminous Intensity Code
VF--- Forward Voltage Code
CIE--- Color Rank Code
LOT NO:
E L P 9 4 0001
A
B
C
D
E
F
A---E: For series number
B---L: Local F: Foreign
C---P: PLCC SMD
D---Year
E---Month
F---SPEC.
PACKING QUANTITY OF BAG :
2000pcs for T670 series
2000pcs for T650 series
2000pcs for S020 series
DATE CODEꢃ2009 04 01
G
H
I
G--- Year
H--- Month
I --- Day
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
9 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò Reel Dimensions
ꢀ
ꢀ
Notes:
1. Taping Quantity : 2000pcs
2. The tolerances unless noted is
ꢁ0.1mm, Angleꢁ0.5ꢄ, Unit: mm.
ò Suggest Soldering Pad Dimensions
ꢀ
ꢀ
ꢀꢁꢀꢂ
ꢀꢁꢃꢄ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
10 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò Package Dimensions Of Tape And Reel
User Feed Direction
4.00±0.10
(.157±.004)
2.00±0.05
(.079±.002)
4.00±0.10
(.157±.004)
*0.254±0.020
(.0100±.0008)
*1.73±0.10
(.068±.004)
Notes: All dimensions are in millimeters.
ò Packaging Of Electronic Components On Continuous Tapes
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
11 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò
Moisture Resistant Packaging
Label
Reel
Label
Desiccant
Aluminum moistue-proof bag
5
5
2
Label
Box
435
Carton
Notes : One reel in a bag, one bag in a inner box, ten inner boxes in a carton. Unit : mm.
ò Cleaning
¤
¤
If cleaning is required , use the following solutions for less than 1 minute and less than 40?.
Appropriate chemicals: isopropyl alcohol. (When using other solvents, it should be confirmed
beforehand whether the solvents will dissolve the package and the resin or not.)
Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as
ultrasonic power and the assembled condition. Before cleaning, a pre-test should be
confirm whether any damage to the LEDS will occur.
¤
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
12of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
Suggest Sn/Pb IR Reflow Soldering Profile Condition:
Suggest Pb-Free IR Reflow Soldering Profile Condition:
ꢀ
ꢀꢀꢀ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
13 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
ò CAUTIONS
1. Static Electricity:
* Static electricity or surge voltage damages the LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
* All devices, equipment and machinery must be properly grounded.
It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
* When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged
LEDs by a light-on test or a VF test at a lower current (blew 1mA is recommended).
* Damaged LEDs will show some unusual characteristics such as the leak current remarkably increases,
the forward voltage becomes lower, or the LEDs do not light at the low current.
Criteria: (VF>2.0V,at IF=0.5m A )
2. Storage :
* Before opening the package :
The LEDs should be kept at 30°C or less and 85%RH or less. When storing the LEDs, moisture
proof packaging with absorbent material (silica gel) is recommended.
* After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered within
168 hours (7 days) after opening the package. If unused LEDs remain, they should be stored in
moisture proof packages, such as sealed containers with packages of moisture absorbent material
(silica gel). It is also recommended to return the LEDs to the original moisture poof bag and to
reseal the moisture proof bag again.
If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should e performed using the following conditions.
Baking treatment: more than 24hours at 65$5R.
ꢅꢀPlease avoid rapid transitions in ambient temperature in high humidity environments where
condensation may occur.
3. Soldering:
Do not apply any stress to the LED lens during soldering while the LED is at high temperature.
Recommended soldering condition.
* Reflow Soldering :
Pre-heat 120~150°C, 120sec. MAX., Peak temperature : 240°C Max. Soldering time : 10 sec Max.
* Soldering Iron : (Not recommended)
Temperature350°C Max., Soldering time : 3 sec. Max.(one time only), power dissipation of iron :
20W Max. use SN60 solder of solder with silver content and don’t to touch LED lens when soldering.
ꢀ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
14 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
4. Lead-Free Soldering
For Reflow Soldering :
ꢀ
R
1 Pre-Heat Temp: 150-180 ,120sec.Max.
ꢀ
R
2 Soldering Temp: Temperature Of Soldering Pot Over 240 ,40sec.Max.
ꢀ
ꢁ Rꢂ
3 Peak Temperature: 2 0
10sec.
ꢀ
4 Reflow Repetition: 2 Times Max.
ꢀ
5 Suggest Solder Paste Formula : 93.3 Sn/3.1 Ag/3.1 Bi/0.5 Cu
For Soldering Iron (Not Recommended) :
ꢀ
1 Iron Tip Temp: 350
R
Max.
ꢀ
2 Soldering Iron: 30w Max.
ꢀ
3 Soldering Time: 3 Sec. Max. One Time.
5. Drive Method
Circuit model A
Circuit model B
(A)Recommended circuit.
(B)The difference of brightness between LED`s could be found due to the Vf-If characteristics of LED.
6. Reliability
Criteria For Judging The Damage
1
3
Criteria for Judgement
MIN. Max.
U.S.L.*)
Item
Symbol
Test Conditions
Forward Voltage
Reverse Current
VF
IR
IF=20mA
VR=5V
-
ꢆ
1.1
2.0
-
ꢆ
L.S.L**) 0.7
U.S.L.*)
ꢆ
Luminous Intensity
IV
IF=20mA
-
ꢅꢇU.S.L.: Upper Standard Level
**) L.S.L: Lower Standard Level
ꢀ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
15 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
2
3
Test Items And Results
Test Item
Number
of
Damaged
Reference
Standard
Test Condition
Note
Tsld=260
(Pre treatment 30
,70%,168hrs)
Tsld=215 ,3sec.
(Lead Solder)
-40 ~ 100
30min. 30min.
~ 25 ~100
?
,10sec.
Resistance to Soldering Heat
(Reflow Soldering)
JEITA
ED-4701300 301
2times
0/50
?
JEITA
ED-4701300 303
?
1time
over 95%
Solder ability (Reflow Soldering)
Thermal Shock
0/50
0/50
0/50
JEITA
ED-4701300 307
?
?
100cycles
100cycles
JEITA
-40
?
?
?
~25
?
Temperature Cycle
ED-4701100 105 30min. 5min. 30min. 5min
JEITA
ED-4701200-
201
High Temperature Storage
Ta=100
Ta=60 ,RH=90%
Ta=-40
Ta=25 ,IF=20mA
Ta=85 ,IF=5mA
Ta=60 ,RH=90%,IF=15mA
Ta=-30 ,IF=20mA
?
1000hrs.
0/50
0/50
JEITA
ED-4701100 103
Temperature Humidity Storage
Low Temperature Storage
?
1000hrs.
1000hrs.
1000hrs.
JEITA
ED-4701200 202
?
0/50
0/50
Steady State Operating Life
Condition
?
Steady State Operating Life
of High Temperature
500hrs.
500hrs.
500hrs.
?
0/50
0/50
0/50
Steady State Operating Life
of High Humidity Heat
Steady State Operating Life
of Low Temperature
?
?
100~2000~100HzSweep
4min.200m/s2
JEITA
48min
Vibration
0/50
ED-4701400 403
3direction,4cycles
1time
1time
Substrate Bending
Stick
JEITA ED-4702
JEITA ED-4702
3mm,5
5N,10
ꢁ
ꢁ
1sec
0/50
0/50
1sec
7.Others:
The appearance and specifications of the product may be modified for improvement without notice.
ꢀ
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
16 of 17
PARA-FOR-068
SURFACE MOUNT DEVICE LED
Part No. : L-T650WDT
REV: B / 1
XXXX : Special specification for
ò PART NO. SYSTEM :
customer
L – T 65 0 X X T - X X X X
T : Taping for 7 inch reel
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
TC : Taping for 13 inch reel
Lens color
C : Water Clear
W : White Diffused
T : Color Transparent
D : Color Diffused
KY : 9mil AlInGap 590nm Super Yellow
KR : 9mil AlInGap 630 nm Super Red
TE : 14mil AlInGap 624 nm Super Red
TY: 14mil AlInGap590 nm Super Yellow
LB : InGaN ITO rough 470nm Blue
LG : InGaN ITO rough520nm Green
W : InGaN + YAG White color
0 : Single chip
1/2 : Super thin single chip
5/6 : Dual chip
F : Three chip(Full color)
650 :
670 :
020 :
3020 1.3T TYPE
3528 1.9T TYPE
3812 0.6T TYPE
C : PCB Top View Type
T :[PLCC Top View Type
S : Side View Type
DRAWING NO. : DS-7B-06-0001
DATE : 2009-10-31 PAGE
17 of 17
PARA-FOR-068
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明