PI7C8952AEVB [PERICOM]

PCI® Dual UART I/O Bridge;
PI7C8952AEVB
型号: PI7C8952AEVB
厂家: PERICOM SEMICONDUCTOR CORPORATION    PERICOM SEMICONDUCTOR CORPORATION
描述:

PCI® Dual UART I/O Bridge

PC
文件: 总1页 (文件大小:497K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Product:  
PCI® Dual UART I/O Bridge  
Part Numbers: PI7C8952  
Hardware reconfiguration through EEPROM  
Operations via I/O or memory mapping  
Sleep Mode with Automatic Wake-up  
Dual power operation (3.3V or 5.0V for PCI I/O and  
1.8V-5.0V for UART I/O)  
Power dissipation: 150 mW typical in normal mode  
Industrial Temperature Range -40o to 85o  
Package: 14x14mm, 100-pin LQFP, w/0.5mm pin pitch -  
Pb free and 100% Green.  
Product Description  
The PI7C8952 is  
a
PCI® Dual UART (Universal  
Asynchronous Receiver-Transmitters) I/O Bridge. It is  
specifically designed to meet various system requirements of  
high performance and lead (Pb) -free. The bridge can be  
used in a wide range of applications such as Remote Access  
Servers, Automation, Process Control, Instrumentation, POS,  
ATM and Multi-port RS232/RS422/RS485 Cards. The  
PI7C8952 provides standard PCI® connection, and it is fully  
compliant with 32-bit PCI Bus 2.3 specifications. The bridge  
supports two high performance UARTs, each of which  
supports Baud rate up to 15 Mbps in asynchronous mode.  
The UARTs support in-band and out-band auto flow control,  
arbitrary trigger level, I/O mapping and memory mapping,  
IrDA (Infrared Data Association) encoder/decoder, 8 general  
purpose I/O and 16-bit timer counter. The PI7C8952 is fully  
software compatible with 16C550 type device drivers and can  
be configured to fit the requirements of RS232, RS422 and  
RS485 applications. The EEPROM interface is provided for  
system implementation convenience. Some registers can be  
pre-programmed via hardware pin settings to facilitate  
system initialization. For programming flexibility, all of the  
default configuration registers can be overwritten by  
EEPROM data, such as sub-vendor and sub-system ID.  
Software support  
MicrosoftTM Windows 2003/XP/Vista/Windows  
Embedded/Windows 8/Windows 8.1/Windows 10 32/64  
bit  
MicrosoftTM Windows CE 6.0  
Linux 2.6, RedHat 6.5 and above  
Applications  
Remote Access Servers  
Network / Storage Management  
Factory Automation and Process Control  
Instrumentation  
Multi-port RS-232/ RS-422/ RS-485 Cards  
Point-of-Sale Systems (PoS)  
Industrial Control (IPC)  
Gaming Machines  
Building Automation  
Industry Specifications Compliance  
PCI Specification, Revision 2.3 compliance  
Embedded Systems  
Features  
Two high performance 950-class UARTs  
Universal PCI Bus Buffers Auto sense 3.3V or 5V  
operation  
UART-0  
128 Byte TX FIFO  
UART  
Regs  
TX0,RX0,DTR0#  
DSR0#, RTS0#  
IR 1.0/  
1.1  
TX  
& RX  
CLK  
ENDEC  
CTS0#,CD0#,RI0#  
RST#  
BRG  
128 Byte RX FIFO  
Fully 16C550 software compatible UARTs  
128-byte FIFO for each transmitter and receiver  
Baud rate up to 15 Mbps in asynchronous mode  
Flexible clock prescaler from 4 to 46  
Data Transfer in Byte, Word and Double-word  
Data Read/Write Burst Operation  
AD[31:0]  
CBE[3:0]#  
FRAME#  
IRDY#  
TRDY#  
DEVSEL#  
STOP#  
INT#  
PCI Local  
Bus  
Interface  
Device  
Global Ctl.  
Registers  
TX1,RX1,DTR1#  
DSR1#, RTS1#  
UART-1  
CTS1#,CD1#,RI1#  
IDSEL#  
PERR#  
SERR#  
PAR  
16-bit  
Timer/Counter  
Automated in-band flow control using programmable  
Xon/Xoff in both directions  
Configuration  
Space  
Registers  
Automated out-of-band flow control using CTS#/RTS#  
and/or DSR#/DTR#  
Arbitrary trigger levels for receiver and transmitter FIFO  
interrupts and automatic in-band and out-band flow  
control  
EECK  
EEDI  
EEDO  
EECS  
EEPROM  
Interface  
General Purpose I/O  
Crystal OSC/Buffer  
GPIO0-GPIO7  
XTAL1  
XTAL2  
TMRCK  
Global Interrupt Status and readable FIFO levels to  
facilitate implementation of efficient device drivers  
Detection of bad data in the receiver FIFO  
Data framing size including 5, 6, 7, 8 and 9 bits  
Infrared (IrDA 1.0/1.1) Data Encoder/Decoder  
Auto RS-485 Half-duplex Output with Control Polarity  
Selector  
PI7C8952 Block Diagram  
Order Information  
PART NUMBER  
PACKAGE  
PB-FREE &  
GREEN  
TEMPERATURE  
PI7C8952AFAE  
PI7C8952AEVB  
100 LQFP  
Board  
YES  
-40oC TO 85oC  
Evaluation Board for PI7C8952A  
Eight General Purpose Inputs/Outputs  
A General Purpose 16-bit Timer/Counter  
Pericom Semiconductor Corp.  
www.pericom.com  
PCI® , PCIe® and PCI Express® are registered trademarks of the PCI SIG® (www.pcisig.org)  
4/27/2016  
Rev 1.1  
Page 1 of 1  
16-0006  

相关型号:

PI7C8952AFAE

PCI® Dual UART I/O Bridge
PERICOM

PI7C8954

PCI® Quad UART I/O Bridge
PERICOM

PI7C8954AEVB

PCI® Quad UART I/O Bridge
PERICOM

PI7C8954AFHE

PCI® Quad UART I/O Bridge
PERICOM

PI7C9X110

PCI Express-to-PCI Reversible Bridge
PERICOM

PI7C9X110A

Micro Peripheral IC,
DIODES

PI7C9X110BNBE

PCI Express-to-PCI Reversible Bridge
PERICOM

PI7C9X111SL

PCI Express-to-PCI Reversible Bridge
PERICOM

PI7C9X111SLBFDE

PCI Express-to-PCI Reversible Bridge
PERICOM

PI7C9X113SLFDE

PCI Bus Controller, CMOS, PQFP128, LQFP-128
PERICOM

PI7C9X130

PCI Express to PCI-X Reversible Bridge
PERICOM

PI7C9X130BNDE

PCI Bus Controller, CMOS, PBGA256, 17 X 17 MM, ROHS COMPLIANT, PLASTIC, BGA-256
PERICOM