935001480112 [NXP]
IC LCD CLOCK, PDSO40, PLASTIC, SOT-158-2, VSOP-40, Clock IC;型号: | 935001480112 |
厂家: | NXP |
描述: | IC LCD CLOCK, PDSO40, PLASTIC, SOT-158-2, VSOP-40, Clock IC 汽车仪表 电池 CD 光电二极管 商用集成电路 振荡器 |
文件: | 总18页 (文件大小:136K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
PCF1171C
4-digit LCD car clock
1997 Apr 16
Product specification
Supersedes data of September 1993
File under Integrated Circuits, IC16
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
FEATURES
GENERAL DESCRIPTION
• Driving standard 31⁄2 or a 4-digit LCD
• Internal voltage regulator for 5 V LCD
• Option for external stabilized voltage supply
• 4.19 MHz oscillator
The PCF1171C is a single chip, 4.19 MHz CMOS car clock
circuit indicating hours and minutes. It is designed to drive
a 31⁄2 or 4-digit liquid crystal display (LCD).
Two external single-pole, single-throw switches will
accomplish all time setting functions. A bonding option
allows the selection of 12-hour or 24-hour display mode.
The circuit is battery-operated via an internal 5 V voltage
regulator or by an external stabilized voltage supply.
• Integrated oscillator output capacitor and polarization
resistor
• Operating ambient temperature: −40 to +85 °C
• 40-lead plastic SMD, face down (VSO40).
ORDERING INFORMATION
TYPE
PACKAGE
NUMBER
NAME
DESCRIPTION
VERSION
PCF1171CT
PCF1171CU
VSO40
plastic very small outline package; 40 leads; face down(1)
uncased chip in tray(2)
SOT158-2
−
−
Notes
1. See Fig.1 and Chapter “Package outline” for pin layout and package details.
2. See Chapter “Chip dimensions and bonding pad locations” for pad layout and package details.
1997 Apr 16
2
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
PINNING
SYMBOL PIN
DESCRIPTION
test reset; connect to (VDD
test speed-up; connect to (VDD
SYMBOL PIN
DESCRIPTION
TR
38
39
40
)
OSC OUT
OSC IN
S1
1
2
3
4
5
oscillator output
oscillator input
set hour
TS
)
(VDD
)
positive supply for test and oscillator
inputs
S3
±2 minute correction
BP
64 Hz backplane driver
(common of LCD)
ADEG1
C1
6
7
8
9
segment driver
segment driver
segment driver
segment driver
(V
)
E2
OSC OUT
OSC IN
S1
1
2
40
39
DD
D2
TS
C2
10 segment driver
11 segment driver
12 segment driver
13 segment driver
14 segment driver
15 segment driver
16 segment driver
17 segment driver
18 set minutes
3
38 TR
37 B1
E3
S3
4
D3
BP
5
36
G2
C3
ADEG1
C1
6
35 F2
34 A2
E4
7
D4
C4
E2
8
33
32
31
30
29
B2
B4
D2
9
P3, P4
P1, P2
G3
S2
10
11
12
C2
PCF1171CT
S4
19 internal voltage regulation
20 negative supply
21 selectable correction mode
22 12/24-hour mode
23 positive supply
24 segment driver
25 segment driver
26 segment driver
27 segment driver
28 segment driver
29 segment driver
30 segment driver
31 colon flashing
32 colon static
E3
VSS
S6
D3
F3
C3 13
28 A3
S5
14
E4
27
B3
VDD
A4
15
16
17
D4
C4
B4
26
25
24
23
22
G4
F4
F4
G4
B3
A4
V
S2 18
S4 19
DD
A3
S5
F3
V
20
21 S6
SS
G3
P1, P2
P3, P4
B2
MSA981
33 segment driver
34 segment driver
35 segment driver
36 segment driver
37 segment driver
A2
F2
G2
B1
Fig.1 Pin configuration, PCF1171CT, (VSO40).
1997 Apr 16
3
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
A1
A2
G2
A3
G3
A4
G4
F1
E1
B1 F2
B2
C2
F3
E3
B3 F4
C3 E4
B4
C4
P1 (P3)
P2 (P4)
G1
D1
C1 E2
D2
D3
D4
MSA984
Fig.2 Segment designation of LCD.
TIME
MSA985
Fig.3 Display mode (24-hour mode shown).
OPERATIONAL INPUTS
Set minutes/reset seconds, switch S2
Operational inputs S1, S2 and S3 have an internal pull-up
resistor to facilitate use of external single-pole,
single-throw switches. A specific debounce circuit is
integrated as protection against contact debounce and
parasitic voltages.
When S2 is closed, the minute setting is corrected
according to the correction mode determined by S6 (see
Chapter “Input options”).
The seconds counter is reset to zero each time S2 is
closed, and begins running each time S2 is opened.
In the description below, an arrangement as shown in
Fig.5 is assumed and S1, S2 and S3 refer to the external
switches rather than the corresponding inputs.
Segment test/reset, switches S1 and S2
If S1 and S2 are closed simultaneously all LCD segments
are switched on. When the switches are released, the
clock starts at 1 : 00 in the 12-hour mode or 0 : 00 in the
24-hour mode.
Set hours, switch S1
Closure of S1 increments the hours according to the
correction mode selected by S6 (see Chapter
“Input options”).
1997 Apr 16
4
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
Time correction ±2 minutes, switch S3
12/24-hour mode, switch S5
For 12-hour display mode, S5 is connected to VDD
This switch operates in two ranges:
.
For 24-hour display mode, S5 is connected to VSS
.
• Displayed time ≥ 58 minutes 00 seconds
• Displayed time ≤ 1 minute 59 seconds.
Single/continuous correction mode, switch S6
When switch S3 is pressed in these ranges, the minutes
and seconds are reset to zero. For displayed
time ≥ 58 minutes 00 seconds, the hour is also
incremented by one.
For single-set correction mode, S6 is connected to VDD
Each closure of S1 or S2 advances the counter by one.
.
For continuous-set correction mode, S6 is connected to
VSS. Momentary closure of S1 or S2 causes single
increments as for single-set correction mode. If S1 or S2 is
kept closed for more than 1s, the counter is automatically
incremented by 1 for each full second that S1 or S2 is kept
closed.
INPUT OPTIONS
In the description below S4, S5 and S6 refer to the external
switches shown in Fig.5 rather than to the corresponding
inputs.
TESTING
In a real application, these inputs will normally be bonded
to the appropriate level to give the required function mode.
In normal operation the test inputs TR (pin 38) and TS
(pin 39) have to be connected to VDD (pin 23). A test
frequency (64 Hz) is available at BP (pin 5). The test mode
is activated by connecting TS to VSS (pin 20). All output
frequencies are then increased by a factor of 65536.
In this mode the maximum input frequency is 100 kHz
(external generator at OSC IN). By connecting TR to VSS
all counters (seconds, minutes and hours) are stopped.
After connecting TR to VDD all counters start from an initial
state.
Internal/external regulation, switch S4
For internal regulation, S4 is closed, the internal voltage
regulator is active and the voltage supply for the LCD is
regulated to 5 V. For external regulation, S4 is open and
the circuit has to be supplied with an externally regulated
voltage.
The switches/inputs described above also operate in the
test mode.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
note 1
MIN.
MAX.
UNIT
VDD
supply voltage with respect to VSS with internal
regulation disconnected;
−
8
V
VI
all input voltages
VSS − 0.3 VDD + 0.3
V
Tamb
Tstg
operating ambient temperature
storage temperature
−40
−55
+85
°C
°C
+125
Note
1. Connecting the supply voltage with reverse polarity, will not harm the circuit, provided the current is limited to 10 mA
by the external resistor.
HANDLING
Inputs and outputs are protected against electrostatic discharges in normal handling. However, to be totally safe, it is
advisable to take handling precautions appropriate to handling MOS devices. Advice can be found in
“Data Handbook IC16, General, Handling MOS Devices”.
1997 Apr 16
5
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
CHARACTERISTICS
VDD = 5 V; VSS = 0 V; Tamb = −40 to +85 °C; crystal: f = 4.194304 MHz; Rs = 50 Ω; CL = 12 pF; unless otherwise
specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Supply
VDD
supply voltage
external regulation
internal regulation
3
−
5
−
6
6
5
V
IREG = 1 mA
4
V
IREG
IDD
regulation current with
internal regulation
0.2
mA
current consumption
all switches open; without LCD; 50
internal regulation
400
700
µA
disconnected; note 1
ro
differential internal impedance IREG = 1 mA
−
−
−
150
200
Ω
Oscillator (pins 1 and 2) (see note 2)
tosc
∆f/fosc
Rfb
start time
−
ms
frequency stability
feedback resistance
input capacitance
output capacitance
∆VDD = 100 mV
−
0.2 × 10−6 1 × 10−6
0.1
−
−
1
MΩ
pF
Ci
−
9
Co
19
24
29
pF
Switches S1, S2 and S3 (pins 18, 3 and 4) and test inputs, TS, TR (pins 38 and 39)
Ii
input current
with inputs connected to VSS
50
32
−
150
−
500
150
2.5
µA
ms
kΩ
td
debounce time
RS
segment driver output
resistance
IL = ±50 µA
1
RBP
fBP
backplane driver output
resistance
IL = ±250 µA
−
−
−
0.2
64
−
0.5
−
kΩ
Hz
mV
backplane driver output
frequency
Voffset(DC) LCD DC offset voltage
RL = 200 kΩ; CL = 1 nF
±50
Notes
1. The current IEXT = IREG + IDD + 2 × Ii (+ LCD current).
2. For correct operation of the oscillator: VDD ≥ 3 V.
1997 Apr 16
6
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
CHIP DIMENSIONS AND BONDING PAD LOCATIONS
y
F4
G4
B3
A3
F3
C4
D4
E4
C3
D3
G3
E3
2.66 mm
PCF1171CU
P1, P2
P3, P4
B2
C2
D2
E2
A2
C1
F2
ADEG1
0
0
G2
x
MSA983
2.36 mm
Chip area: 6.28 mm2.
Bonding pad dimensions: 110 µm × 110 µm.
Chip thickness: 381 ±25 µm.
Fig.4 Bonding pad locations, PCF1171CU; 40 terminals.
1997 Apr 16
7
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
Table 1 Bonding pad locations (dimensions in µm)
All x/y coordinates are referenced to the pad G2, see Fig.4.
PAD
x
y
PAD
x
y
OSC OUT
OSC IN
S1
1060
1260
1460
1680
1920
1920
1920
1920
1920
1920
1920
1920
1920
1920
1920
1920
1680
1460
1260
1060
−220
0
S6
S5
860
660
460
240
0
2320
2320
2320
2320
2320
2080
1860
1660
1460
1260
1060
860
660
460
240
0
0
0
VDD
A4
S3
0
BP
0
F4
ADEG1
C1
240
460
660
860
1060
1260
1460
1660
1860
2080
2320
2320
2320
2320
2320
−170
G4
0
B3
0
E2
A3
0
D2
F3
0
C2
G3
0
E3
P1, P2
P3, P4
B2
0
D3
0
C3
0
E4
A2
0
D4
F2
0
C4
G2
0
B4
B1
240
460
660
860
0
S2
TR
0
S4
TS
0
VSS
VDD
0
chip corner (max. value)
1997 Apr 16
8
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
APPLICATION INFORMATION
R = 4.7 kΩ to 8.2 kΩ
battery
C
= 5 pF to 25 pF 4.19 MHz
T
I
EXT
OSC
IN
OSC
OUT
V
TR
TS
(V
)
DD
DD
40
23 38
39
2
1
S6
selectable
correction mode
V
S6
S5
DD
21
22
V
SS
I
2 I
i
I
DD
REG
V
DD
S5
33 µF to
100 µF
12/24 hour mode
V
SS
SHUNT
(1)
VOLTAGE
REGULATOR
segment
drivers
S3
S3
to LCD
4
2 minutes correction
S2
S1
S2
PCF1171C
18
3
set minutes
S1
set hour
19
20
V
SS
S4
internal voltage
regulation
S4
MSA982
(1) Only required if internal regulation is disconnected.
From pin 2 (OSC IN) to any other pin the stray capacitance should not exceed 2 pF.
Fig.5 Typical application diagram.
1997 Apr 16
9
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
PACKAGE OUTLINE
VSO40: plastic very small outline package; 40 leads; face down
SOT158-2
D
E
A
y
X
c
H
v
M
A
E
Z
40
21
L
L
p
θ
Q
A
1
(A )
3
A
A
2
pin 1 index
detail X
1
20
5
w
M
b
p
e
0
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
A
max.
(1)
(2)
(1)
UNIT
mm
A
A
A
b
c
D
E
e
H
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
E
0.3
0.1
2.45
2.25
0.42
0.30
0.22
0.14
15.6
15.2
7.6
7.5
12.3
11.8
1.7
1.5
1.15
1.05
0.6
0.3
2.70
0.11
0.25
0.762
0.03
2.25
0.089
0.2
0.1
0.1
7o
0o
0.012 0.096
0.004 0.089
0.017 0.0087 0.61
0.012 0.0055 0.60
0.30
0.29
0.48
0.46
0.067 0.045
0.059 0.041
0.024
0.012
inches
0.010
0.008 0.004 0.004
Note
1. Plastic or metal protrusions of 0.4 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
EIAJ
92-11-17
95-01-24
SOT158-2
1997 Apr 16
10
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
SOLDERING
Introduction
Wave soldering
Wave soldering techniques can be used for all VSO
packages if the following conditions are observed:
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
• A double-wave (a turbulent wave with high upward
pressure followed by a smooth laminar wave) soldering
technique should be used.
• The longitudinal axis of the package footprint must be
parallel to the solder flow.
• The package footprint must incorporate solder thieves at
the downstream end.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our “IC Package Databook” (order code 9398 652 90011).
During placement and before soldering, the package must
be fixed with a droplet of adhesive. The adhesive can be
applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the
adhesive is cured.
Reflow soldering
Reflow soldering techniques are suitable for all VSO
packages.
Maximum permissible solder temperature is 260 °C, and
maximum duration of package immersion in solder is
10 seconds, if cooled to less than 150 °C within
Reflow soldering requires solder paste (a suspension of
fine solder particles, flux and binding agent) to be applied
to the printed-circuit board by screen printing, stencilling or
pressure-syringe dispensing before package placement.
6 seconds. Typical dwell time is 4 seconds at 250 °C.
A mildly-activated flux will eliminate the need for removal
of corrosive residues in most applications.
Several techniques exist for reflowing; for example,
thermal conduction by heated belt. Dwell times vary
between 50 and 300 seconds depending on heating
method. Typical reflow temperatures range from
215 to 250 °C.
Repairing soldered joints
Fix the component by first soldering two diagonally-
opposite end leads. Use only a low voltage soldering iron
(less than 24 V) applied to the flat part of the lead. Contact
time must be limited to 10 seconds at up to 300 °C. When
using a dedicated tool, all other leads can be soldered in
one operation within 2 to 5 seconds between
270 and 320 °C.
Preheating is necessary to dry the paste and evaporate
the binding agent. Preheating duration: 45 minutes at
45 °C.
1997 Apr 16
11
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
DEFINITIONS
Data sheet status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1997 Apr 16
12
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
NOTES
1997 Apr 16
13
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
NOTES
1997 Apr 16
14
Philips Semiconductors
Product specification
4-digit LCD car clock
PCF1171C
NOTES
1997 Apr 16
15
Philips Semiconductors – a worldwide company
Argentina: see South America
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113,
Tel. +61 2 9805 4455, Fax. +61 2 9805 4466
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101, Fax. +43 1 60 101 1210
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 200 733, Fax. +375 172 200 773
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Belgium: see The Netherlands
Brazil: see South America
Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA,
Tel. +48 22 612 2831, Fax. +48 22 612 2327
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 689 211, Fax. +359 2 689 102
Portugal: see Spain
Romania: see Italy
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231,
Tel. +65 350 2538, Fax. +65 251 6500
Colombia: see South America
Czech Republic: see Austria
Slovakia: see Austria
Slovenia: see Italy
Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S,
Tel. +45 32 88 2636, Fax. +45 31 57 0044
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000,
Tel. +27 11 470 5911, Fax. +27 11 470 5494
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615800, Fax. +358 9 61580920
South America: Rua do Rocio 220, 5th floor, Suite 51,
04552-903 São Paulo, SÃO PAULO - SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 829 1849
France: 4 Rue du Port-aux-Vins, BP317, 92156 SURESNES Cedex,
Tel. +33 1 40 99 6161, Fax. +33 1 40 99 6427
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 3 301 6312, Fax. +34 3 301 4107
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 23 53 60, Fax. +49 40 23 536 300
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 632 2000, Fax. +46 8 632 2745
Greece: No. 15, 25th March Street, GR 17778 TAVROS/ATHENS,
Tel. +30 1 4894 339/239, Fax. +30 1 4814 240
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2686, Fax. +41 1 481 7730
Hungary: see Austria
India: Philips INDIA Ltd, Shivsagar Estate, A Block, Dr. Annie Besant Rd.
Worli, MUMBAI 400 018, Tel. +91 22 4938 541, Fax. +91 22 4938 722
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2865, Fax. +886 2 2134 2874
Indonesia: see Singapore
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL,
Tel. +90 212 279 2770, Fax. +90 212 282 6707
Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3,
20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108,
Tel. +81 3 3740 5130, Fax. +81 3 3740 5077
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Uruguay: see South America
Vietnam: see Singapore
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 625 344, Fax.+381 11 635 777
Middle East: see Italy
For all other countries apply to: Philips Semiconductors, Marketing & Sales Communications,
Internet: http://www.semiconductors.philips.com
Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
© Philips Electronics N.V. 1997
SCA54
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
417087/1200/02/pp16
Date of release: 1997 Apr 16
Document order number: 9397 750 01526
it Q
Philips Semiconductors Home
ProducBuy
MySemContac
Product Information
catalogonline
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from Use right mouse button to
Philips Semiconductors.
Please register now !
Stay informed
PCF1171C; 4-digit
LCD car clock
download datasheet
Download datasheet
General description
Features
Datasheet
Applications
Products
Email/translate
Block diagram
Products & packages
Buy online
Parametrics
Support & tools
Similar products
MultiMarket
Semiconductors
•
•
•
Product Selector
Catalog by
Function
General description
The PCF1171C is a single chip, 4.19 MHz CMOS car clock circuit indicating hours and minutes. It is
designed to drive a 3 1/2 or 4-digit liquid crystal display (LCD).
Catalog by
System
•
Two external single-pole, single-throw switches will accomplish all time setting functions. A bonding option
allows the selection of 12-hour or 24-hour display mode. The circuit is battery-operated via an internal 5 V
voltage regulator or by an external stabilized voltage supply.
Cross-reference
Packages
•
•
End of Life
information
Distributors Go
Here!
•
•
Features
●
●
●
●
●
●
●
Driving standard 3 1/2 or a 4-digit LCD
Internal voltage regulator for 5 V LCD
Option for external stabilized voltage supply
4.19 MHz oscillator
Integrated oscillator output capacitor and polarization resistor
Operating ambient temperature: -40 to +85 °C
40-lead plastic SMD, face down (VSO40).
Models
•
•
SoC solutions
Datasheet
Type number Title
Publication release Datasheet status
date
Page
count
File
size
(kB)
Datasheet
PCF1171C
4-digit
LCD car
clock
4/16/1997
Product specification 16
83
Download
Parametrics
Type number Package
Application
FUNCTION Operating No. of Clock Type
temp.(Cel) Pins
CMOS ICs for Clocks,
Watches and Real Time Clocks
Clocks
SOT158-2
PCF1171CT
4-digit LCD
Car Clock
-40~85
-40~85
40
(VSO40)
CMOS ICs for Clocks,
Watches and Real Time Clocks
Clocks
SOT158-2
PCF1171CU
4-digit LCD
Car Clock
(VSO40)
Products, packages, availability and ordering
Type number North
Ordering code
Marking/Packing
Package Device status Buy
IC packing info
American (12NC)
online
type
number
SOT158-2
(VSO40)
Standard Marking *
Tube
Full production
Full production
Full production
PCF1171CT
PCF1171CU
9350 014 80112
9350 014 80118
9350 069 90026
-
-
-
SOT158-2
(VSO40)
Standard Marking *
Reel Pack, SMD, 13"
SOT158-2
(VSO40)
No Marking * Die In
Waffle Carriers
Products in the above table are all in production. Some variants are discontinued; click here for information
on these variants.
Similar products
PCF1171C links to the similar products page containing an overview of products that are similar in
function or related to the type number(s) as listed on this page. The similar products page includes products
from the same catalog tree(s), relevant selection guides and products from the same functional category.
Email/translate this product information
●
●
Email this product information.
Translate this product information page from English to:
Translate
French
The English language is the official language used at the semiconductors.philips.com website and webpages.
All translations on this website are created through the use of Google Language Tools and are provided for
convenience purposes only. No rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
相关型号:
935002730112
1 CHANNEL(S), 38.4Kbps, SERIAL COMM CONTROLLER, PDSO24, 7.50 MM, PLASTIC, MS-013, SOT-137-1, SOL-24
NXP
935002730129
1 CHANNEL(S), 38.4Kbps, SERIAL COMM CONTROLLER, PDSO24, 7.50 MM, PLASTIC, MS-013, SOT-137-1, SOL-24
NXP
935002730512
IC 1 CHANNEL(S), 115.2K bps, SERIAL COMM CONTROLLER, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Serial IO/Communication Controller
NXP
935002730518
IC 1 CHANNEL(S), 115.2K bps, SERIAL COMM CONTROLLER, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Serial IO/Communication Controller
NXP
935002730529
1 CHANNEL(S), 38.4Kbps, SERIAL COMM CONTROLLER, PDSO24, 7.50 MM, PLASTIC, MS-013, SOT-137-1, SOL-24
NXP
935003220602
IC F/FAST SERIES, 5 2 LINE TO 1 LINE MULTIPLEXER, CONFIGURABLE OUTPUT, PDIP20, 0.300 INCH, PLASTIC, SOT-146-1, DIP-20, Multiplexer/Demultiplexer
NXP
935003230118
IC F/FAST SERIES, 5 2 LINE TO 1 LINE MULTIPLEXER, CONFIGURABLE OUTPUT, PDSO20, 7.50 MM, PLASTIC, MS-013AC, SOT-163-1, SO-20, Multiplexer/Demultiplexer
NXP
935003230602
IC F/FAST SERIES, 5 2 LINE TO 1 LINE MULTIPLEXER, CONFIGURABLE OUTPUT, PDSO20, 7.50 MM, PLASTIC, MS-013AC, SOT-163-1, SO-20, Multiplexer/Demultiplexer
NXP
935005340602
IC F/FAST SERIES, 5 3 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDIP24, 0.300 INCH, SLIM, PLASTIC, MS-001AF, SOT-222-1, DIP-24, Multiplexer/Demultiplexer
NXP
935005350602
IC F/FAST SERIES, 5 3 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Multiplexer/Demultiplexer
NXP
935005350623
IC F/FAST SERIES, 5 3 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Multiplexer/Demultiplexer
NXP
©2020 ICPDF网 联系我们和版权申明