935005350623 [NXP]
IC F/FAST SERIES, 5 3 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Multiplexer/Demultiplexer;型号: | 935005350623 |
厂家: | NXP |
描述: | IC F/FAST SERIES, 5 3 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO24, 7.50 MM, PLASTIC, MS-013AD, SOT-137-1, SO-24, Multiplexer/Demultiplexer 光电二极管 输出元件 逻辑集成电路 |
文件: | 总16页 (文件大小:132K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
74F711A, 74F711-1, 74F712A, 74F712-1
Multiplexers
Product specification
IC15 Data Handbook
1990 Dec 13
Philips
Semiconductors
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
74F711A Quint 2-to-1 Data Selector Multiplexer (3-State)
74F711-1 Quint 2-to-1 Data Selector Multiplexer with 30W Equivalent Output Termination Impedance (3-State)
74F712A Quint 3-to-1 Data Selector Multiplexer
74F712-1 Quint 3-to-1 Data Selector Multiplexer with 30W Equivalent Output Termination Impedance
To improve speed and noise immunity, V and GND side pins are
used.
FEATURES for 74F711A/74F711-1
• Consists of five 2-to-1 Multiplexers
CC
The 74F712A/74F712-1 consist of five 3-to1 multiplexers designed
• High impedance PNP base inputs for reduced loading
for address multiplexing of dynamic RAMs and other multiplexing
(20µA in High and Low states)
applications. The 74F712A has two select (S0, S1) inputs to
determine which set of five inputs will be propagated to the five
• Designed for address multiplexing of dynamic RAM and other
outputs. The outputs source 15mA and sink 64mA. The 74F712-1 is
the same as the 74F712A except that it has a 30W termination
impedance on each output to reduce line noise and the outputs sink
5mA.
applications
• Output inverting/non-inverting option
• 30W termination impedance on each output – 74F711-1
• Outputs sink 64mA (74F711A only)
TYPICAL SUPPLY
TYPICAL
PROPAGATION DELAY
CURRENT
(TOTAL)
TYPE
FEATURES for 74F712A/74F712-1
• Consists of five 3-to-1 Multiplexers
74F711A
74F711-1
74F712A
74F712-1
6.0ns
6.5ns
6.5ns
6.5ns
30mA
29mA
25mA
25mA
• High impedance PNP base inputs for reduced loading
(20µA in High and Low states)
• Designed for address multiplexing of dynamic RAM and other
applications
• 30W termination impedance on each output – 74F712-1
• Outputs sink 64mA (74F712A only)
ORDERING INFORMATION
COMMERCIAL RANGE
= 5V ± 10%
DESCRIPTION
V
CC
DESCRIPTION
PKG DWG #
The 74F711A/74F711-1 consist of five 2-to-1 multiplexers designed
for address multiplexing of dynamic RAMs and other multiplexing
applications. The 74F711A has a common select (S) input, an
Output Enable (OE) input and an Output Inverting (INV) input to
control the 3-State outputs. The outputs source 15mA and sink
64mA. The 74F711-1 is the same as the 74F711A except that is has
a 30W termination impedance on each output to reduce line noise
and the 3-State outputs sink 5mA.
T
amb
= 0° C to +70°C
20-Pin Plastic DIP
N74F711AN, N74F711-1N
SOT146-1
SOT222-1
24-Pin Plastic Slim N74F712AN, N74F712-1N
DIP (300 mil)
20-Pin Plastic SOL N74F711AD, N74F711-1D
24-Pin Plastic SOL N74F712AD, N74F712-1D
SOT163-1
SOT137-1
When the inverting input (INV) is Low, the input data path is
inverted.
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
74F(U.L.)
HIGH/LOW
LOAD VALUE
HIGH/LOW
PINS
Dna, Dnb
DESCRIPTION
Data inputs
Select input
1.0/0.066
1.0/0.033
1.0/0.033
1.0/0.033
750/106.7
750/8.33
1.0/0.066
1.0/0.033
750/106.7
750/8.33
20µA/40µA
20µA/20µA
20µA/20µA
20µA/20µA
15mA/64mA
15mA/5mA
20µA/40µA
20µA/20µA
15mA/64mA
15mA/5mA
S
OE
Output Enable input (active Low)
Output inverting input (active Low)
Data outputs for 74F711A
Data outputs for 74F711-1
Data inputs
74F711A/
74F711-1
INV
Q0 - Q4
Q0 - Q4
Dna, Dnb, Dnc
S0, S1
Q0 - Q4
Q0 - Q4
Select inputs
74F712A/
74F712-1
Data outputs for 74F712A
Data outputs for 74F712-1
NOTE: One (1.0) FAST Unit Load (U.L.) is defined as: 20µA in the High state and 0.6mA in the Low state.
2
1990 Dec 13
853-1368 01258
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
PIN CONFIGURATION – 74F711A/74F711-1
PIN CONFIGURATION – 74F712A/74F712-1
D0a
D0b
Q0
1
2
3
4
5
20 D1a
19 D1b
18 D2a
17 D2b
1
2
3
4
5
24
23
22
21
20
S0
S1
D0a
D1a
D2a
Q0
Q1
Q1
D3a
D4a
GND
16
15
14
V
CC
Q2
D3a
D3b
Q2
Q3
Q4
S
6
7
8
9
6
7
19
18
17
16
15
14
13
GND
Q3
V
CC
D0b
D1b
D2b
13 D4a
12 D4b
11 OE
8
Q4
9
D0c
D1c
INV 10
10
11
12
D3b
D4b
D4c
D2c
D3c
SF01215
SF01216
LOGIC SYMBOL – 74F711A/74F711-1
LOGIC SYMBOL – 74F712A/74F712-1
1
2
20 19 18 17 15 14 13 12
24 18
9
23 17 10 22 16 11 21 15 12 20 14 13
D0a D0b D1a D1b D2a D2b D3a D3b D4a D4b
D0a D0b D0c D1a D1b D1c D2a D2b D2c D3a D3b D3c D4a D4b D4c
9
10
11
S
OE
1
2
S0
S1
INV
Q0
3
Q1
4
Q2
6
Q3
7
Q4
8
Q0
3
Q1
4
Q2
5
Q3
7
Q4
8
V
= Pin 16
V
= Pin 19
CC
CC
GND = Pin 6
GND = Pin 5
SF01217
SF01218
LOGIC SYMBOL (IEEE/IEC) – 74F711A/74F711-1
LOGIC SYMBOL (IEEE/IEC) – 74F712A/74F712-1
MUX
MUX
1
G1
1
G
2
G2
11
EN1
10
M
24
1
3
18
9
3
1
2
23
17
10
22
16
20
4
5
7
8
4
6
7
8
19
18
17
11
21
15
14
13
12
15
12
20
14
13
SF01219
SF01220
3
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
LOGIC DIAGRAM – 74F711A/74F711-1
11
OE
10
INV
9
S
1
D0a
3
2
Q0
D0b
20
D1a
19
4
Q1
D1b
18
D2a
17
6
Q2
D2b
15
D3a
14
7
Q3
D3b
13
D4a
8
12
Q4
D4b
V
= Pin 16
CC
GND = Pin 5
SF01221
FUNCTION TABLE – 74F711A/74F711-1
INPUTS
OUTPUT
Qn
S
L
INV
L
OE
L
Dna
Dnb
Data a Data b
Data a Data b
Data a Data b
Data a Data b
Data a
Data b
Data a
Data b
Z
H
L
L
L
H
L
H
X
H
L
X
H
X
X
H
L
X
Z
=
High voltage level
Low voltage level
Don’t care
=
=
=
High impedance “off” state
4
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
LOGIC DIAGRAM – 74F712A/74F712-1
1
S0
2
S1
24
D0a
18
D0b
3
Q0
9
D0c
23
D1a
17
D1b
4
Q1
10
D1c
22
D2a
16
D2b
5
Q2
11
D2c
21
D3a
15
D3b
7
Q3
12
D3c
20
D4a
14
D4b
8
Q4
13
V
= Pin 19
D4c
CC
GND = Pin 6
SF01222
FUNCTION TABLE – 74F712A/74F712-1
INPUTS
OUTPUT
Qn
S0
L
S1
L
Dna
Dnb
Dnc
Data a Data b Data c
Data a Data b Data c
Data a Data b Data c
Data a
Data b
Data c
H
X
L
H
H
L
X
=
=
=
High voltage level
Low voltage level
Don’t care
5
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
ABSOLUTE MAXIMUM RATINGS
Operation beyond the limits set forth in this table may impair the useful life of the device.
Unless otherwise noted these limits are over the operating free-air temperature range.
SYMBOL
PARAMETER
RATING
–0.5 to +7.0
–0.5 to +7.0
–30 to +5
UNIT
V
V
Supply voltage
Input voltage
Input current
V
V
CC
IN
I
IN
mA
V
V
OUT
Voltage applied to output in High output state
–0.5 to +V
CC
74F711A, 74F712A
74F711-1, 74F712-1
96
10
mA
mA
°C
°C
I
Current applied to output in Low output state
OUT
T
Operating free-air temperature range
Storage temperature
0 to +70
amb
T
–65 to +150
stg
RECOMMENDED OPERATING CONDITIONS
LIMITS
NOM
5.0
UNIT
SYMBOL
PARAMETER
MIN
4.5
MAX
V
CC
V
IH
V
IL
Supply voltage
5.5
V
High-level input voltage
Low-level input voltage
Input clamp current
High-level output current
2.0
V
0.8
–18
–15
64
V
I
I
mA
mA
mA
mA
°C
IK
OH
74F711A, 74F712A
74F711-1, 74F712-1
I
OL
Low-level output current
5
T
amb
Operating free-air temperature
0
70
6
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
LIMITS
UNIT
1
SYMBOL
PARAMETER
TEST CONDITIONS
2
MIN
2.4
2.7
2.0
2.0
TYP
MAX
±10%V
V
V
V
V
V
CC
I
= –3mA
OH
OH
V
V
V
= MIN,
= MAX,
= MIN
CC
IL
IH
±5%V
3.4
CC
V
OH
High-level output voltage
±10%V
CC
CC
I
= –15mA
±5%V
74F711A/
74F712A
only
±10%V
0.38
0.42
0.55
0.55
CC
I
I
= MAX
= 5mA
OL
V
CC
= MIN,
= MAX,
= MIN
±5%V
V
V
CC
V
OL
Low-level output voltage
Input clamp voltage
V
V
IL
IH
74F711-1/
74F712-1
±10%V
0.38
0.50
–1.2
100
OL
CC
V
IK
V
CC
= MIN, I = I
IK
–0.73
V
I
Input current at maximum input
voltage
I
I
V
= MAX, V = 7.0V
µA
CC
CC
I
I
High-level input current
V
= MAX, V = 2.7V
20
µA
µA
µA
IH
IL
I
Others
–20
–40
I
Low-level input current
V
= MAX, V = 0.5V
CC I
Dn only
Off-state output current
High-level voltage
applied
I
V
= MAX, V = 2.7V
50
µA
µA
OZH
OZL
CC
O
74F711A/
74F711-1
only
Off-state output current
Low-level voltage
applied
I
V
= MAX, V = 0.5V
–50
CC
O
Short-circuit output
current
74F711-1/
74F712-1
I
I
V
= MAX
–60
–60
–150
–150
mA
mA
OS
CC
3
74F711A/
74F712A
4
Output current
V
= MAX, V = 2.25 V
CC O
O
I
25
33
27
26
33
28
20
30
20
29
35
46
40
40
45
45
27
40
30
40
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
CCH
74F711A
I
V
V
= MAX
= MAX
CCL
CCZ
CCH
CC
I
I
I
Supply
current
(total)
74F711-1
I
CCL
CCZ
CCH
CC
I
CC
I
74F712A
74F712-1
V
V
= MAX
= MAX
CC
I
CCL
I
CCH
CC
I
CCL
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at V = 5V, T = 25°C.
CC
amb
3. Not more than one output should be shorted at a time. For testing I , the use of high-speed test apparatus and/or sample-and-hold
OS
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, I tests should be performed last.
OS
4. I is tested under conditions that produce current approximity one half of the true short-circuit output current (I ).
O
OS
7
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
AC ELECTRICAL CHARACTERISTICS – 74F711A/74F711-1
LIMITS
T
= 0° C to +70°C
amb
V
T
= +25°C
amb
V
= 5V ± 10%
CC
SYMBOL
PARAMETER
TEST CONDITION
UNIT
= 5V
CC
C = 50pF,
L
C = 50pF, R = 500W
L
L
R = 500W
L
MIN
TYP
MAX
MIN
MAX
t
t
Propagation delay
Dna, Dnb to Qn
2.5
2.5
5.0
4.0
7.5
7.0
2.0
2.0
8.0
7.5
ns
ns
PLH
PHL
Waveform 1, 2
Waveform 1, 3
Waveform 1, 3
t
t
Propagation delay
S to Qn
7.0
5.0
9.0
8.0
12.0
11.0
5.5
4.5
13.5
12.0
ns
ns
PLH
PHL
t
t
Propagation delay
INV to Qn
6.0
4.0
9.0
8.0
12.5
11.0
5.0
3.5
14.0
11.5
ns
ns
PLH
PHL
74F711A
t
t
Output Enable time
OE to Qn
Waveform 4
Waveform 5
2.5
2.5
4.0
4.5
6.5
7.0
2.0
2.0
7.0
7.5
ns
ns
PZH
PZL
t
t
Output Disable time
OE to Qn
Waveform 4
Waveform 5
2.5
3.0
4.0
5.0
7.0
8.0
2.0
2.5
8.0
8.5
ns
ns
PHZ
PLZ
t
t
Propagation delay
Dna, Dnb to Qn
3.0
2.0
4.5
4.5
7.5
7.5
2.0
2.5
9.0
8.0
ns
ns
PLH
PHL
Waveform 1, 2
Waveform 1, 3
t
t
Propagation delay
S, INV to Qn
6.5
4.5
10.0
8.5
13.5
11.5
5.5
4.0
14.5
12.5
ns
ns
PLH
PHL
74F711-1
t
t
Output Enable time
OE to Qn
Waveform 4
Waveform 5
2.5
3.0
4.5
5.0
7.5
7.5
2.0
2.5
9.0
8.0
ns
ns
PZH
PZL
t
t
Output Disable time
OE to Qn
Waveform 4
Waveform 5
2.0
3.5
4.5
5.5
7.0
8.5
2.0
3.0
8.0
9.5
ns
ns
PHZ
PLZ
AC ELECTRICAL CHARACTERISTICS – 74F712A/74F712-1
LIMITS
T
V
= 0 to +70°C
= 5V ± 10%
amb
CC
T
= +25°C
amb
V
SYMBOL
PARAMETER
TEST CONDITION
UNIT
= 5V
CC
C = 50pF,
L
C = 50pF, R = 500W
L
L
R = 500W
L
MIN
TYP
MAX
MIN
MAX
t
t
Propagation delay
Dna, Dnb, Dnc to Qn
2.0
2.0
3.5
3.5
6.5
6.5
2.0
2.0
7.0
7.0
ns
ns
PLH
PHL
Waveform 1, 2
Waveform 1
74F712A
74F712-1
t
t
Propagation delay
S0, S1 to Qn
6.5
5.0
8.0
7.5
11.5
10.0
5.5
4.5
13.5
11.0
ns
ns
PLH
PHL
t
t
Propagation delay
Dna, Dnb, Dnc to Qn
2.0
2.0
4.0
4.0
7.0
7.0
2.0
2.0
7.5
7.5
ns
ns
PLH
PHL
Waveform 1, 2
Waveform 1
t
t
Propagation delay
S0, S1 to Qn
7.0
5.5
9.0
7.5
12.0
10.5
6.0
5.5
13.5
11.0
ns
ns
PLH
PHL
8
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
AC WAVEFORMS
For all waveforms, V = 1.5V
M
Dna, Dnb,
Dnc, Sn
Dna, Dnb,
Dnc, Sn
V
V
M
M
V
V
M
M
t
t
PHL
PLH
t
t
PHL
PLH
Qn
V
V
M
M
Q
V
V
n
M
M
SF01223
SF01224
Waveform 1. Propagation Delay for Non-Inverting Output
Waveform 2. Propagation Delay for Inverting Output
V
V
M
INV
M
OE
Qn
V
M
V
-0.3V
0V
OH
t
t
PHZ
PZH
t
PHL
V
t
M
PLH
Qn
SF00343
V
M
Waveform 4. 3-State Output Enable Time to High Level and
Output Disable Time from High Level
SF01225
Waveform 3. Propagation Delay for INV to Output
V
t
V
M
M
OE
Qn
t
PZL
PLZ
V
M
V
+0.3V
OL
SF00344
Waveform 5. 3-State Output Enable Time to Low
Level and Output Disable Time from Low Level
9
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711–1/
74F712A/74F712–1
Multiplexers
TEST CIRCUIT AND WAVEFORMS
V
CC
t
w
AMP (V)
90%
7.0V
90%
NEGATIVE
PULSE
V
V
R
M
M
L
V
V
OUT
IN
10%
10%
PULSE
GENERATOR
D.U.T.
0V
t
t )
t
t )
THL ( f
TLH ( r
R
C
R
L
T
L
t
t )
t
t )
TLH ( r
THL ( f
AMP (V)
0V
90%
M
90%
POSITIVE
PULSE
V
V
M
Test Circuit for 3-State Outputs
10%
10%
t
w
SWITCH POSITION
TEST
SWITCH
closed
closed
open
Input Pulse Definition
t
t
PLZ
PZL
All other
DEFINITIONS:
R
L
C
L
R
T
=
=
=
Load resistor;
see AC electrical characteristics for value.
Load capacitance includes jig and probe capacitance;
see AC electrical characteristics for value.
Termination resistance should be equal to Z
pulse generators.
INPUT PULSE REQUIREMENTS
family
V
M
rep. rate
t
w
t
t
THL
amplitude
TLH
of
OUT
2.5ns
2.5ns
74F
3.0V
1.5V
1MHz
500ns
SF00777
10
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
DIP20: plastic dual in-line package; 20 leads (300 mil)
SOT146-1
11
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
DIP24: plastic dual in-line package; 24 leads (300 mil)
SOT222-1
12
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
SO20: plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
13
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
SO24: plastic small outline package; 24 leads; body width 7.5 mm
SOT137-1
14
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
NOTES
15
1990 Dec 13
Philips Semiconductors
Product specification
74F711A/74F711-1,
74F712A/74F712-1
Multiplexers
Data sheet status
[1]
Data sheet
status
Product
status
Definition
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
Production
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Date of release: 10-98
9397-750-05174
Document order number:
Philips
Semiconductors
相关型号:
935006790112
IC TELECOM, PAGING RECEIVER, PDSO28, 7.50 MM, PLASTIC, MS-013AE, SOT-136-1, SOP-28, Paging Circuit
NXP
935007150118
4000/14000/40000 SERIES, QUAD 2-INPUT OR GATE, PDSO14, 3.90 MM, PLASTIC, MS-012, SOT108-1, SOP-14
NXP
935007600602
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP14, 0.300 INCH, PLASTIC, MO-001AA, SOT-27-1, DIP-14, FF/Latch
NXP
935007610602
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-012AB, SOT-108-1, SO-14, FF/Latch
NXP
935007610623
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-012AB, SOT-108-1, SO-14, FF/Latch
NXP
935007620602
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP16, 0.300 INCH, PLASTIC, SOT-38-4, DIP-16, FF/Latch
NXP
935007630602
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16, 3.90 MM, PLASTIC, MS-012AC, SOT-109-1, SO-16, FF/Latch
NXP
935007630623
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16, 3.90 MM, PLASTIC, MS-012AC, SOT-109-1, SO-16, FF/Latch
NXP
935007640602
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP14, 0.300 INCH, PLASTIC, MO-001AA, SOT-27-1, DIP-14, FF/Latch
NXP
935007650118
IC F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-012AB, SOT-108-1, SO-14, FF/Latch
NXP
©2020 ICPDF网 联系我们和版权申明