RIF-1-RPT-LDP-24DC/1IC [PHOENIX]
Power/Signal Relay,;
| 型号： | RIF-1-RPT-LDP-24DC/1IC |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Power/Signal Relay, 继电器 |
| 文件： | 总11页 (文件大小：143K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-
in display/interference suppression module, retaining bracket. Contact type: 1 N/O contact, max. switch-on
current up to 130 A peak, 80 A (20 ms) input voltage 24 V DC
Key Commercial Data
Packing unit
10 pc
GTIN
GTIN
4055626405216
69.000 g
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
85364900
China
Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
area
Utilization restriction
Dimensions
Width
Height
Depth
16 mm
93 mm
75 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 70 °C
-40 °C ... 85 °C
Ambient temperature (storage/transport)
Coil side
Nominal input voltage UN
Input voltage range in reference to UN
Typical input current at UN
24 V DC
see diagram
18 mA
12/31/2018 Page 1 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Technical data
Coil side
Typical response time
Typical release time
8 ms
10 ms
Coil voltage
24 V DC
Protective circuit
Free-wheeling diode Damping diode
Operating voltage display
Power dissipation for nominal condition
Yellow LED
0.43 W
Contact side
Contact type
1 N/O contact
Single contact
AgSnO
Type of switch contact
Contact material
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks
in adjacent modules. Potential bridging is then carried out with FBST 8-
PLC... or ...FBST 500...)
Maximum switching voltage
Minimum switching voltage
Min. switching current
12 V AC/DC (at 100 mA)
100 mA (at 12 V DC)
Maximum inrush current
80 A (for 20 ms)
130 A (peak, at capacitive load, 230 V AC, 24 μF)
6 A
Limiting continuous current
10 A (Value is permissible if connections 11 and 21, as well as
connections 14 and 24 are bridged.)
Interrupting rating (ohmic load) max.
264 W (at 24 V DC, observe contact derating)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
2750 VA (at 250 V AC, observe contact derating)
1200 mW
Switching capacity min.
Switching capacity
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Connection data input side
Connection name
Coil side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
12/31/2018 Page 2 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Technical data
Connection data input side
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
Connection data output side
Connection name
Contact side
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section solid
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on
double terminal block)
Conductor cross section AWG
26 ... 16 (solid)
26 ... 16 (flexible)
General
Type of note
Notes on operation
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in
bridge for the output side (11/21)
Note
Test voltage relay winding/relay contact
Operating mode
4 kV AC (50 Hz, 1 min.)
100% operating factor
IP20 (Relay base)
RT III (Relay)
Degree of protection
3x 107 cycles
any
Mechanical service life
Mounting position
Assembly instructions
In rows with zero spacing
Standards and Regulations
Designation
Standards/regulations
Standards/regulations
EN 50178
EN 61810-1
Rated insulation voltage
Rated surge voltage
Insulation
250 V AC
6 kV
Safe isolation, reinforced insulation
Degree of pollution
Overvoltage category
2
III
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
12/31/2018 Page 3 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Drawings
Circuit diagram
Diagram
22
24
12
14
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
21
11
A
B
A2-
A1+
20 25 30 35 40 45 50 55 60 65 70 75
Ambient temperature [°C]
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side
(see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
Diagram
15
13
11
9
7
5
3
– – – Connections 11 and 21 bridged with FBS 2-8 plug-in bridge
1
20 25 30 35 40 45 50 55 60 65 70 75
Ambient temperature [°C]
Contact derating
Articles in set
Relay base - RIF-1-BPT/2X21 - 2900931
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in
connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
12/31/2018 Page 4 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Articles in set
Single relay - REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity:
A1+, A2-, input voltage: 12 ... 24 V DC ±20 %
Retaining bracket - RIF-RH-1 - 2900953
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm
tall miniature power relay and solid-state relay
Classifications
eCl@ss
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27371601
27371600
27371600
27371601
27371601
27371601
ETIM
ETIM 2.0
ETIM 3.0
ETIM 4.0
ETIM 5.0
ETIM 6.0
EC001437
EC001437
EC001437
EC001437
EC001437
Approvals
Approvals
12/31/2018 Page 5 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Approvals
Approvals
DNV GL
Ex Approvals
Approval details
DNV GL
http://exchange.dnv.com/tari/
TAA000018V
Accessories
Accessories
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
12/31/2018 Page 6 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
12/31/2018 Page 7 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-6 BU - 3036932
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 2-6 GY - 3032237
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
12/31/2018 Page 8 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Plug-in bridge - FBS 2-8 GY 7042 - 3032541
Bridge for potential distribution
Marker carriers
Marker carriers - STP 5-2 - 0800967
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm
12/31/2018 Page 9 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Marker for terminal blocks - UC-TMF 16 - 0819262
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 5.1 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Spare parts
Relay base - RIF-1-BPT/2X21 - 2900931
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in
connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
Single relay - REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC
Plug-in module - RIF-LDP-12-24 DC - 2900939
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity:
A1+, A2-, input voltage: 12 ... 24 V DC ±20 %
12/31/2018 Page 10 / 11
https://www.phoenixcontact.com/in/products/2909884
Relay Module - RIF-1-RPT-LDP-24DC/1IC - 2909884
Accessories
Retaining bracket - RIF-RH-1 - 2900953
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm
tall miniature power relay and solid-state relay
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
12/31/2018 Page 11 / 11
相关型号：
©2020 ICPDF网 联系我们和版权申明