RIF-2-RPT-LDP-24DC/4X21AU [PHOENIX]

Power/Signal Relay,;
RIF-2-RPT-LDP-24DC/4X21AU
型号: RIF-2-RPT-LDP-24DC/4X21AU
厂家: PHOENIX CONTACT    PHOENIX CONTACT
描述:

Power/Signal Relay,

继电器
文件: 总10页 (文件大小:148K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's  
documentation. Our General Terms of Use for Downloads are valid  
(http://phoenixcontact.com/download)  
Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay with  
additional hard gold plating, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 24 V  
DC  
Key Commercial Data  
Packing unit  
10 pc  
10 pc  
Minimum order quantity  
GTIN  
GTIN  
4055626293011  
104.610 g  
85364110  
Poland  
Weight per Piece (excluding packing)  
Custom tariff number  
Country of origin  
Technical data  
Note  
EMC: class A product, see manufacturer's declaration in the download  
area  
Utilization restriction  
Dimensions  
Width  
Height  
Depth  
31 mm  
96 mm  
75 mm  
Ambient conditions  
Ambient temperature (operation)  
-40 °C ... 60 °C  
-40 °C  
Ambient temperature (storage/transport)  
Coil side  
Nominal input voltage UN  
Input voltage range in reference to UN  
24 V DC  
see diagram  
01/22/2019 Page 1 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Technical data  
Coil side  
Typical input current at UN  
Typical response time  
Typical release time  
42 mA  
13 ms  
14 ms  
Protective circuit  
Damping diode  
Yellow LED  
1.01 W  
Status display  
Power dissipation for nominal condition  
Contact side  
Contact type  
4 PDTs  
Type of switch contact  
Contact material  
Single contact  
AgNi, hard gold-plated  
If the specified maximum values for multi-layer contact relays are  
exceeded, the gold plating is destroyed. The maximum values of the  
power contact relay are then valid. This can result in a shorter service  
life than with a pure power contact.  
Note  
Maximum switching voltage  
30 V AC  
36 V DC  
Minimum switching voltage  
Min. switching current  
2 V (At 24 mA)  
2 mA (24 V DC)  
50 mA  
Maximum inrush current  
Limiting continuous current  
Interrupting rating (ohmic load) max.  
Switching capacity min.  
50 mA  
1.2 W (at 24 V DC)  
48 mW  
Contact side (with destroyed gold layer)  
Contact material  
AgNi  
Note  
the following values are applicable if a gold layer is destroyed  
250 V AC/DC  
Maximum switching voltage  
Minimum switching voltage  
Limiting continuous current  
Maximum inrush current  
Min. switching current  
Interrupting rating (ohmic load) max.  
5 V (At 24 mA)  
6 A  
16 A (20 ms, N/O contact)  
5 mA (at 24 V)  
144 W (at 24 V DC)  
124 W (at 48 V DC)  
108 W (at 60 V DC)  
52 W (at 110 V DC)  
48 W (at 220 V DC)  
1500 VA (for 250 V AC)  
2 A (at 24 V, DC13)  
0.22 A (at 120 V, DC13)  
0.11 A (at 250 V, DC13)  
1.5 A (at 24 V, AC15)  
1.5 A (at 120 V, AC15)  
01/22/2019 Page 2 / 10  
Switching capacity  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Technical data  
Contact side (with destroyed gold layer)  
1 A (at 240 V, AC15)  
Connection data input side  
Connection name  
Coil side  
Connection method  
Push-in connection  
Stripping length  
8 mm  
Conductor cross section solid  
Conductor cross section flexible  
0.14 mm² ... 1.5 mm²  
0.14 mm² ... 1.5 mm²  
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)  
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on  
double terminal block)  
Conductor cross section AWG  
26 ... 16 (solid)  
26 ... 16 (flexible)  
Connection data output side  
Connection name  
Contact side  
Connection method  
Push-in connection  
Stripping length  
8 mm  
Conductor cross section solid  
Conductor cross section flexible  
0.14 mm² ... 1.5 mm²  
0.14 mm² ... 1.5 mm²  
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)  
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on  
double terminal block)  
Conductor cross section AWG  
26 ... 16 (solid)  
26 ... 16 (flexible)  
General  
2.5 kVrms (50 Hz, 1 min.)  
2 kVrms (50 Hz, 1 min.)  
100% operating factor  
IP20 (Relay base)  
RT I (Relay)  
Test voltage relay winding/relay contact  
Test voltage relay contact/relay contact  
Operating mode  
Degree of protection  
approx. 2x 107 cycles  
any  
Mechanical service life  
Mounting position  
Assembly instructions  
In rows with zero spacing  
Standards and Regulations  
Standards/regulations  
Rated insulation voltage  
Rated surge voltage  
Insulation  
DIN EN 50178  
250 V AC  
2.5 kV  
Basic insulation  
Degree of pollution  
Overvoltage category  
2
II  
01/22/2019 Page 3 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Technical data  
Standards and Regulations  
Flammability rating according to UL 94  
V2  
Environmental Product Compliance  
China RoHS  
Environmentally Friendly Use Period = 50  
For details about hazardous substances go to tab “Downloads”,  
Category “Manufacturer's declaration”  
Drawings  
Circuit diagram  
Diagram  
42 32 22 12  
44 34 24 14  
1,8  
1,7  
1,6  
1,5  
1,4  
1,3  
1,2  
1,1  
1,0  
0,9  
0,8  
0,7  
0,6  
41 31 21 11  
A2-  
A1+  
20  
30  
40  
50  
60  
70  
80  
Ambient temperature [°C]  
DC coil (observe contact derating)  
AC coil (observe contact derating)  
Operating voltage range  
Diagram  
Diagram  
7
10  
20  
10  
6
4
6
2
1
10  
0,5  
0,3  
0,2  
5
0,1  
10  
10  
20  
30  
50 70 100  
200 300  
0
1
2
3
Switching voltage [V]  
Switching capacity [kVA]  
AC, ohmic load  
DC, ohmic load  
250 V AC, ohmic load  
!
Electrical service life  
Interrupting rating  
01/22/2019 Page 4 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Diagram  
1
0,9  
0,8  
0,7  
0,6  
0,5  
0,4  
0,3  
1
0,9  
0,8  
0,7  
0,6  
0,5  
0,4  
0,3  
0,2  
j
COS  
Service life reduction factor  
Classifications  
eCl@ss  
eCl@ss 5.0  
eCl@ss 5.1  
eCl@ss 6.0  
eCl@ss 7.0  
eCl@ss 8.0  
eCl@ss 9.0  
27371601  
27371600  
27371600  
27371601  
27371601  
27371601  
ETIM  
ETIM 2.0  
ETIM 3.0  
ETIM 4.0  
ETIM 5.0  
ETIM 6.0  
EC001437  
EC001437  
EC001437  
EC001437  
EC001437  
UNSPSC  
UNSPSC 6.01  
UNSPSC 7.0901  
UNSPSC 11  
30211917  
39121516  
39121516  
39121516  
39122334  
UNSPSC 12.01  
UNSPSC 13.2  
Approvals  
Approvals  
Approvals  
DNV GL / EAC  
01/22/2019 Page 5 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Approvals  
Ex Approvals  
Approval details  
DNV GL  
http://exchange.dnv.com/tari/  
TAA000018V  
RU C-  
DE.A*30.B.01082  
EAC  
Accessories  
Accessories  
End block  
End clamp - CLIPFIX 35 - 3022218  
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:  
gray  
Insulating sleeve  
Insulating sleeve - MPS-IH WH - 0201663  
Insulating sleeve, color: white  
Insulating sleeve - MPS-IH RD - 0201676  
Insulating sleeve, color: red  
01/22/2019 Page 6 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Accessories  
Insulating sleeve - MPS-IH BU - 0201689  
Insulating sleeve, color: blue  
Insulating sleeve - MPS-IH YE - 0201692  
Insulating sleeve, color: yellow  
Insulating sleeve - MPS-IH GN - 0201702  
Insulating sleeve, color: green  
Insulating sleeve - MPS-IH GY - 0201728  
Insulating sleeve, color: gray  
Insulating sleeve - MPS-IH BK - 0201731  
Insulating sleeve, color: black  
Jumper  
01/22/2019 Page 7 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Accessories  
Plug-in bridge - FBS 2-6 - 3030336  
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red  
Plug-in bridge - FBS 2-6 BU - 3036932  
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue  
Plug-in bridge - FBS 2-6 GY - 3032237  
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray  
Marker carriers  
Marker carriers - STP 5-2 - 0800967  
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4  
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5  
Terminal marking  
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004  
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:  
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm  
01/22/2019 Page 8 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Accessories  
Zack marker strip - ZB 15:UNBEDRUCKT - 0811972  
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:  
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm  
Marker for terminal blocks - UC-TM 16 - 0819217  
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,  
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block  
width: 16 mm, lettering field size: 15.45 x 10.5 mm  
Marker for terminal blocks - UC-TMF 16 - 0819262  
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,  
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block  
width: 16 mm, lettering field size: 15.45 x 5.1 mm  
Test plug terminal block  
Test plugs - MPS-MT - 0201744  
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray  
Spare parts  
Relay base - RIF-2-BPT/4X21 - 2900934  
RIF-2... relay base, for industrial relay with 2 or 4 PDTs, push-in connection, plug-in option for input/suppressor  
modules, for mounting on NS 35/7,5  
01/22/2019 Page 9 / 10  
https://www.phoenixcontact.com/in/products/2908332  
Relay Module - RIF-2-RPT-LDP-24DC/4X21 AU - 2908332  
Accessories  
Single relay - REL-IR4/LDP- 24DC/4X21AU - 2903670  
Plug-in industrial relay with power contacts and additional hard gold plating, 4 PDTs, test key, status LED,  
freewheeling diode, mechanical switch position indicator, polarity: A1+, A2-, coil voltage: 24 V DC  
Retaining bracket - RIF-RH-2 - 2900954  
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for  
industrial relay  
Phoenix Contact 2019 © - all rights reserved  
http://www.phoenixcontact.com  
01/22/2019 Page 10 / 10  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY