LV1120BEV-70.00M [PLETRONICS]
Oscillator, 70MHz Min, 250MHz Max, 70MHz Nom;型号: | LV1120BEV-70.00M |
厂家: | PLETRONICS, INC. |
描述: | Oscillator, 70MHz Min, 250MHz Max, 70MHz Nom |
文件: | 总8页 (文件大小:129K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
This device is obsolete, January 2008
This is replaced by the LV91xxDV device
For new designs use the LV93xxDV device
• Pletronics’ LV11B Series is a quartz crystal
• 1 to 700 MHz
controlled precision square wave generator with
an LVDS output.
• Solder pad compatible with many 9x14 Plastic J-
lead packages.
• 9.9mm x 13.97mm ‘B’ package
• Enable/Disable Function on pad 2
• Does NOT permit “wired-OR” of outputs
• Low Jitter
• FR4 base with a mechanical metal cover.
• Tape and Reel or cut tape packaging is available.
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 2.18 grams or .82 grams or 1.51 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +7.0V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2006, 2007, 2008 Pletronics Inc.
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Part Number:
LV11
45
B
E
V
-125.0M -XX
Part Marking:
Packaging code or blank
PLE
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
LV11B
FFFF.F M
C YMDXX
or
LV11BX
FFFF.F M
PLE XX
C YYWWXX
Frequency in MHz
Supply Voltage VCC
V = 3.3V +_ 10%
Optional Enhanced OTR
Blank = Temp. range -10 to +70oC
E = Temp. range -40 to +85oC
Series Model
Frequency Stability
45 = _+ 50 ppm
44 = _+ 25 ppm
20 = _+ 20 ppm
Series Model
Legend:
PLE
= Pletronics
FFFF.F M
= Frequency in MHz
YMD or YYWW = Date of Manufacture (Year - month - day or year and week)
All other marking is internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc.
are not identified from the marking. External packaging labels and packing list will correctly identify
the ordered Pletronics part number.
Codes for Date Code YMD
Code
6
7
8
9
0
1
2
2006
2007
2008
2009
2010
2011
2012
Year
Code
Month
A
B
C
D
E
F
G
H
J
K
L
M
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
Code
1
1
2
2
3
3
F
4
5
6
6
7
8
8
9
9
A
10
N
B
11
P
C
12
R
4
5
H
7
K
Day
Code
Day
D
E
G
16
W
28
J
L
M
21
13
T
14
U
15
V
17
X
18
Y
19
Z
20
22
23
24
Code
Day
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Electrical Specification for 3.30V _+10% over the specified temperature range
Item
Min
1
Max
700
+50
+25
+20
LVDS
1.60
--
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy “45"
“44"
-50
-25
-20
For all supply voltages, load changes, aging for 1
year, shock, vibration and temperatures
“20"
Output Waveform
Output High Level
Output Low Level
--
0.90
250
1.125
--
Volts
Volts
mVolts
Volts
mVolts
%
Differential Output (VOD
)
450
1.375
50
See load circuit R1 = 50 ohms
> 80 MHz
Output Offset Voltage (VOS)
Differential Output Error (dVOS)
Output Symmetry
45
55
Referenced to 50% of amplitude or crossing point
Output TRISE and TFALL
300
400
-
700
900
0.2
pS
> 80 MHz
Vth is 20% and 80% of waveform
< 80 MHz
pS
Jitter
pS RMS
Measured from 12KHz to 20MHz from Fnominal
Measured from 10Hz to 1MHz from Fnominal
-
2.8
Vcc Supply Current
-
90
mA
> 80 MHz
Includes current of properly
terminated device
Enable/Disable Internal Pull-up
V disable
50
-
Kohm
Volts
Volts
nS
To Vcc (equivalent resistance)
Referenced to Ground
-
2.0
-
0.8
-
V enable
Enable
100
100
5
Time for output to reach a logic state
Time for output to reach a high Z state
Disable time
Start up time
-
nS
-
mS
> 80 MHz
Measured from the time
Vcc = 3.0V
Operating Temperature Range
Storage Temperature Range
-10
-40
-55
+70
+85
oC
oC
oC
Standard Temperature Range
Extended Temperature Range “E” Option
+125
Specifications with Pad 2 E/D open circuit
www.pletronics.com
425-776-1880
3
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Typical Phase-Noise Response
0
-20
-40
-60
-80
-100
-120
-140
-160
10
1,000
100,000
Frequency (Hz)
10,000,000
Load Circuit
Test Waveform
Symmetry
Vhigh
80%
Out
50%
20%
Vlow
Out*
Trise
Tfall
www.pletronics.com
425-776-1880
4
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
Layout and application information
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both
input pads
For Optimum Jitter Performance, Pletronics recommends:
•
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
5
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Mechanical:
Inches
mm
A
B
C
0.390 +_0.010
0.550 +_0.010
0.125 max
9.90 +_0.25
13.97 +_0.25
3.17 max
0.66
D1 0.026 typ.
E1 0.050
1.27
F1
0.028 R
0.72 R
4.57
G1 0.180
H1 0.100
FR4 PCB Base:
Solder masked
Cover:
Centered on the base
304 Stainless Steel
0.010 inch (0.25µm)
Electroless Nickel Plated
1 µinch (25 µm) typical
2.54
All via holes tented on bottom
Copper Clad ½ oz. Typical
Gold plated 0.02 µinch (0.5 µm)
Label:
White Kapton with Black Letters
–or--
I1
0.050
0.015
1.27
J1
0.38
K1 0.380
9.65
Pin 3 Ground plane is typical
Blue Epoxy heat cure ink covering
top with laser marked lettering
Not to scale
•
•
The package is not hermetically sealed.
The sides are intentionally left open to permit cleaning material to freely flow in the package, thus
minimizing the accumulation of contaminants during cleaning processes.
•
The internal part of the package must be thoroughly dry before operating.
Pad
Function
Note
1
No connect
There is no internal connection to this pad
Output
When this pad is not connected the oscillator shall operate.
2
Enable/Disable
When this pad is <0.30 volts, the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
3
4
5
6
Ground (GND)
Output
The outputs must be terminated, 100 ohms between the outputs is the ideal
termination. When disabled, the outputs are not in a high impedance state - can
not be wire - or connected
Output*
Supply Voltage
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
www.pletronics.com
425-776-1880
6
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
Reflow Cycle (typical for lead free processing)
245°C Maximum
10 Seconds Maximum
250
200
215°C±10°C
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
D0
E1
P0
P2
T Max
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
+_0.1
2.0
+_0.1
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
14.25
F
P1
T2
Max
W
Max
Ao, Bo
& Ko
24 mm
12.1
7.5 +_0.1
16.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
---
mm
---
24.4
+2.0
-0.0
24.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
LV11B Series 3.3 V
LVDS Clock Oscillators
January 2008
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2005, 2006, Pletronics Inc.
www.pletronics.com
425-776-1880
8
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明