SM5545MX [PLETRONICS]
1.8 V CMOS Clock Oscillators; 1.8 V CMOS时钟振荡器型号: | SM5545MX |
厂家: | PLETRONICS, INC. |
描述: | 1.8 V CMOS Clock Oscillators |
文件: | 总8页 (文件大小:147K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
• Pletronics’ SM55 Series is a quartz crystal
controlled precision square wave generator with a
CMOS output.
• The package is designed for high density surface
mount designs.
• 0.8 to 165 MHz
• 3.2 x 5 mm LCC Ceramic Package
• Enable/Disable Function
• Disable function includes low standby power
mode
• This is a low cost mass produced oscillator.
• Tape and Reel or cut tape packaging is available.
• Low Jitter
• Optimized for low power applications (battery)
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.064 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +7.0V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Io Output Current
+25 mA to -25 mA
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2006, 2007, Pletronics Inc.
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Part Number:
SM55 45
M
E
X
- 75.0M
-XX
Packaging code or blank
Part Marking:
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
PFF.FFF M
C YMDxx
or
PFF.FFF M
C YYWWxx
or
PLE SM55
FF.FFF M
CYMDxx
or
P5xYWWx
C FF.FF Mxxx
or
Frequency in MHz
Supply Voltage VCC
X = 1.8V +_ 10%
Optional Enhanced OTR
Blank = Temp. range -10 to +70oC
E = Temp. range -40 to +85oC
Series Model
5xYWWxx
FF.FFF M
CPLE xxx
Frequency Stability
45 = +_ 50 ppm
44 = +_ 25 ppm
20 = +_ 20 ppm
Series Model
Marking Legend:
PLE = Pletronics
FF.FFF M = Frequency in MHz
YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day)
All other marking is internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are
not identified from the marking. External packaging labels and packing list will correctly identify the
ordered Pletronics part number.
Codes for Date Code YMD
Code
6
7
8
9
0
1
2
2006
2007
2008
2009
2010
2011
2012
Year
Code
Month
A
B
C
D
E
F
G
H
J
K
L
M
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
Code
1
1
2
2
3
3
F
4
5
6
6
7
8
8
9
9
A
10
N
B
11
P
C
12
R
4
5
H
7
K
Day
Code
Day
D
E
G
16
W
28
J
L
M
21
13
T
14
U
15
V
17
X
18
Y
19
Z
20
22
23
24
Code
Day
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Electrical Specification for 1.80V +_10% over the specified temperature range
Item
Min
0.8
-50
-25
-20
Max
165
+50
+25
+20
CMOS
-
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy “45"
“44"
For all supply voltages, load changes, aging for 1
year, shock, vibration and temperatures
“20"
Output Waveform
Output High Level
90
70
-
%
%
%
of VCC for IOH= +2 mA <35 MHz
of VCC for IOH= +8 mA > 35 MHz
of VCC for IOL = -2 mA <35 MHz
of VCC for IOL = -8 mA >35 MHz
at 50% point of VCC (See load circuit)
-
Output Low Level
Output Symmetry
10
-
30
45
55
Jitter Output: 1 to 15 MHz
Output: 15 to 35 MHz
Output: 35 to 50 MHz
Output: 50 to 70 MHz
Output: > 70 MHz
Output: 25 to 70 MHz
Output: > 70 MHz
E/D Internal Pull-up
V disable
-
6.0
5.0
4.0
3.0
2.5
0.7
0.6
500
30
pS RMS 10 Hz to 1 MHz from the output frequency
-
pS RMS
-
pS RMS
-
-
pS RMS
pS RMS
-
pS RMS 12 KHz to 20 MHz from the output frequency
pS RMS
-
50
-
Kohm
%
to VCC
of VCC applied to pin 1
V enable
70
-10
-10
-
-
%
Output leakage VOUT = VCC
VOUT = 0V
+10
+10
4
uA
uA
uA
uA
nS
nS
mS
oC
Pin 1 low, device disabled
Standby Current ICC
< 35 MHz
-
100
250
250
10
> 35 MHz
Enable time
Disable time
Start up time
-
Time for output to reach a logic state
Time for output to reach a high Z state
Time for output to reach specified frequency
Standard Temperature Range
Extended Temperature Range “E” Option
-
-
Operating Temperature
Range
-10
-40
-55
+70
+85
+125
oC
Storage Temperature Range
oC
www.pletronics.com
425-776-1880
3
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Electrical Specification for 1.80V +_10% over the specified temperature range
Item
Typ
2
Max
5
Unit
nS
Condition
Output TRISE and TFALL
< 35 MHz
CLOAD = 15 pF
20% to 80% of VCC
See Load Circuit
1
3.5
2.5
10
7
nS
> 35 MHz and < 70 MHz
> 70 MHz
1.5
4
nS
nS
< 35 MHz
CLOAD = 30 pF
20% to 80% of VCC
See Load Circuit
2
nS
> 35 MHz and < 70 MHz
> 70 MHz
3
7
nS
VCC Supply Current (ICC)
1
2
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
< 8 MHz
CLOAD = 15 pF
1.5
2
2.5
3
> 8 MHz and < 16 MHz
> 16 MHz and < 35 MHz
> 35 MHz and < 70 MHz
> 70 MHz and < 120 MHz
> 120 MHz
-
18
27
37
2.5
3
17
23
1.5
2
< 8 MHz
CLOAD = 30 pF
> 8 MHz and < 16 MHz
> 16 MHz and < 35 MHz
> 35 MHz and < 70 MHz
3
4
10
20
Specifications with Pad 1 E/D open circuit
Typical phase noise plot for 5 oscillators at different output frequencies.
0
-20
-40
-60
19.4M
25M
-80
32M
50M
-100
66.7M
-120
-140
-160
-180
10
1,000
100,000
10,000,000
Frequency (Hz)
www.pletronics.com
425-776-1880
4
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Symmetry
Load Circuit and Test Waveform
Vhigh
80% * Vcc
50% * Vcc
20% * Vcc
Vlow
Ground
Trise
Tfall
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
5
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Mechanical:
Inches
mm
A
0.197 +_0.006
5.00 +_0.15
B
C
0.126 +_0.006
0.045 +_0.004
3.20 +_0.15
1.15 +_0.10
1.23
D1 0.048
E1 0.100
2.54
F1
0.004
0.10
G1 0.050
H1 0.055
1.27
1.40
I1
0.024
0.004
0.60
J1
0.10R
0.020R
Not to Scale
Contacts :
K1 0.008
1 Typical dimensions
Gold 11.8 μinches 0.3 μm minimum over Nickel 50 to 350 μinches 1.27 to 8.89 μm
Pad
Function
Note
1
Output
When this pad is not connected the oscillator shall operate.
Enable/Disable
When this pad is logic low the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
2
3
4
Ground (GND)
Output
Supply Voltage
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
Layout and application information
For Optimum Jitter Performance, Pletronics recommends:
•
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
6
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
250
200
215°C±10°C
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
T
Max
D0
E1
P0
P2
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
+_0.1
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
14.25
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
7.5 +_0.1
8.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
SM55M Series 1.8 V
CMOS Clock Oscillators
June 2007
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Copyright © 2007, Pletronics Inc.
www.pletronics.com
425-776-1880
8
相关型号:
SM5545MX-FREQ-T1K
CMOS Output Clock Oscillator, 0.8MHz Min, 165MHz Max, ROHS COMPLIANT, CERAMIC, LCC-4
PLETRONICS
SM5545MX-FREQ-T500
CMOS Output Clock Oscillator, 0.8MHz Min, 165MHz Max, ROHS COMPLIANT, CERAMIC, LCC-4
PLETRONICS
©2020 ICPDF网 联系我们和版权申明