MAP80_06 [POWER-ONE]

power supplies provides reliable, tightly-regulated DC; 电源提供了可靠，紧密稳压直流


型号：	MAP80_06
厂家：	POWER-ONE
描述：	power supplies provides reliable, tightly-regulated DC 电源提供了可靠，紧密稳压直流
文件：	总4页 (文件大小：136K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MAP80 AC-DC Series Data Sheet

Features

•

RoHS lead-solder-exempt compliant

Wide-range input for 110/220 VAC applications

CE marked to Low Voltage Directive

Input transient & ESD compliance to

EN61000-4-2/-3/-4

•

Meets EN55022, Class B limits

TTL compatible Power Fail Signal

Greater than 175,000 Hours MTBF

Metric and SAE mounting inserts

Description

Power-One’s MAP80 Series of power supplies provides reliable, tightly-regulated DC power for commercial and

industrial systems which require high peak current capabilities. Wide-range AC input and full international safety, EMI,

and ESD compliance ensure worldwide acceptance. All units bear the CE Mark.

The MAP80 utilizes a variable frequency design with a thermally efficient U-channel chassis to provide full power

operation in convection-cooled applications. Design innovations include metric and SAE mounting inserts on each

mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections

or popular single-row Molex connector mating.

Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific

output voltage requirements.

Single Output Model Selection

OUTPUT

VOLTAGE

ADJUSTMENT

RANGE

MAXIMUM OUTPUT

CURRENT

PEAK OUTPUT

CURRENT (NOTE 3)

LINE

REGULATION

LOAD

REGULATION

RIPPLE & NOISE

%p-p (NOTE 1)

INITIAL SETTING

ACCURACY

MODEL

MAP80-1005

MAP80-1012

MAP80-1024

12V/15V

24V/28V

4.5V to 5.6V

11.5V to 15.5V

23.0V to 29.0V

16A

18A

0.2%

0.1%

0.5%

1.4%

0.5%

5.0V to 5.1V

11.76V to 12.15V

23.8V to 24.2V

7.5/6A (Note 2)

3.8/3.2A (Note 2)

9.2/7.3A (Note 2)

4.6/3.9A (Note 2)

NOTES: 1) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth.

2) MAP80-1012 output currents are expressed as 12V/15V operation. MAP80-1024 output currents are expressed as 24V/28V operation.

3) Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum.

Multiple Output Model Selection – 80W Continuous Output Power

OUTPUT

VOLTAGE

ADJUSTMENT

RANGE

OUTPUT

CURRENT

PEAK OUTPUT

CURRENT (NOTE 1)

LINE

REGULATION

LOAD

REGULATION

RIPPLE & NOISE

%p-p (NOTE 2)

INITIAL SETTING

ACCURACY

MODEL

+5V

+12V

-5V

-12V

+5V

+24V

-12V

+12V

+5V

+12V

-12V

+12V

+5V

+15V

-5V

-15V

+5V

+24V

-15V

+15V

4.8V to 5.5V

11.52V to 12.48V

Fixed

14A

16A

0.2%

0.5%

0.2%

0.5%

0.2%

0.5%

0.2%

0.5%

0.2%

0.5%

5.1V to 5.2V

11.9V to 12.1V

-4.8V to -5.4V

-11.5V to -12.5V

5.1V to 5.2V

24.0V to 24.1V

-11.5V to -12.5V

11.5V to 12.5V

5.1V to 5.2V

12.0V to 12.1V

-11.6V to -12.4V

11.6V to 12.4V

5.1V to 5.2V

14.6V to 15.1V

-4.8V to -5.4V

-14.4V to -15.5V

5.1V to 5.2V

MAP80-4000

Fixed

4.8V to 5.5V

23.04V to 24.96V

Fixed

16A

3.5A

16A

MAP80-4001

MAP80-4002

MAP80-4003

MAP80-4004

Fixed

4.7V to 5.5V

11.52V to 12.48V

Fixed

4.8V to 5.5V

14.40V to 15.60V

Fixed

14A

3.5A

14A

Fixed

4.8V to 5.5V

23.04V to 24.96V

Fixed

16A

3.5A

24.0V to 24.1V

-14.4V to -15.5V

14.4V to 15.5V

Fixed

JUN 07, 2006 revised to AUG 10, 2006

Page 1 of 4

www.power-one.com

MAP80 AC-DC Series Data Sheet

Multiple Output Model Selection (Cont.) – 80W Continuous Output Power

OUTPUT

VOLTAGE

ADJUSTMENT

RANGE

OUTPUT

CURRENT

PEAK OUTPUT

CURRENT (NOTE 1)

LINE

REGULATION

LOAD

REGULATION

RIPPLE & NOISE

%p-p (NOTE 2)

INITIAL SETTING

ACCURACY

MODEL

+5V

+12V

-5V

-12V

+5V

+12V

-12V

-5V

4.8V to 5.5V

11.52V to 12.48V

Fixed

14A

16A

0.2%

0.5%

0.2%

0.5%

5.1V to 5.2V

12.0V to 12.1V

-4.8V to -5.4V

-11.5V to -12.5V

5.1V to 5.2V

12.0V to 12.1V

-11.5V to -12.5V

-4.8V to -5.4V

MAP80-4010

Fixed

4.8V to 5.5V

11.52V to 12.48V

Fixed

MAP80-4020

Fixed

NOTES: 1) Peak loads up to 90 Watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 90 Watts.

2) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth.

Input Specifications

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Input Voltage - AC

Continuous input range.

175

135

264

VAC

Input Frequency

Brown Out Protection

Hold-up Time

AC input.

VAC

Lowest AC input voltage that regulation is maintained with full rated loads.

Nominal AC input voltage (115VAC), full rated load.

Input Current

90 VAC (80W load).

110VAC (80W load).

2.5

1.8

ARMS

Input Protection

Non-user serviceable internally located AC input line fuse.

Inrush Surge Current

Internally limited by thermistor. Vin = 264VAC (one cycle). 25° C.

APK

kHz

Operating Frequency

Switching frequency of power supply (varies with load).

120

Output Specifications

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Efficiency

Full load, 115VAC. Varies with distribution of loads among outputs.

Minimum Loads

MAP80-1012

MAP80-1024

0.42

0.21

1.00

Amps

MAP80-1005 and all multiple output models, main channel only.

Ripple and Noise

Output Power

Full load, 20MHz bandwidth.

Continuous output power, all multiple output models.

Peak output power (60s maximum, 10% duty cycle), all multiple output models.

See Model Selection Chart.

Watts

Overshoot / Undershoot

Regulation

Output voltage overshoot/undershoot at turn-on, V1, V2.

Varies by output. Total regulation includes: line changes from 90-132 VAC

or 175-264, changes in load starting at 20% load and changing to 100% load.

See Model Selection Chart.

Transient Response

Recovery time, to within 1% of initial set point due to a 50-100%

load change, 4% max. deviation. (Main output of multiple output units).

500

µS

Turn-On Delay

Turn-on Rise Time

Time required for initial output voltage stabilization.

Time required for output voltage to rise from 10% to 90%.

Sec

Interface Signals and Internal Protection

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Overvoltage

Protection

Provided on MAP80-1005 and the main output of multiple output units.

5.5

6.8

MAP80-1012

MAP80-1024

Overload Protection

Power Fail

Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition.

TTL compatible logic signal. Time before regulation dropout

Warning (Note 1)

due to loss of input power at 110VAC.

NOTES: 1) Power Fail Warning is not available on MAP80-1024. The MAP80-1012 is an open collector output, capable of sinking 35 mA, maximum.

JUN 07, 2006 revised to AUG 10, 2006

Page 2 of 4

www.power-one.com

MAP80 AC-DC Series Data Sheet

Safety, Regulatory, and EMI Specifications

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Agency Approvals

UL1950.

CSA 22.2 No. 234/950.

EN60950 (TUV).

Approved

Dielectric Withstand

Voltage

Input to output.

2600

VDC

Electromagnetic

Interference,

Conducted

Input Transient

Protection

FCC CFR title 47 part 15 sub-part B - conducted & radiated.

EN55022 / CISPR 22 conducted.

EN55022 / CISPR 22 radiated.

Class

EN61000-4-5 level 3.

Line to line

Line to ground

Insulation Resistance

Leakage Current

Input to output.

Per EN60950, 264VAC.

M⍀

µA

500

Environmental Specifications

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Altitude

Operating.

Non-operating.

10k

40k

ASL Ft.

Operating Temperature

Derate linearly above 50°C by 2.5% per °C

to a maximum temperature of 70°C.

At 100% load:

At 50% load:

°C

Storage Temperature

Temperature Coefficient

Relative Humidity

Shock

-55

0.03

°C

%/°C

%RH

0°C to 70°C (After 15 minute warm-up).

Non-condensing.

Operating, peak acceleration.

Random vibration, 10Hz to 2kHz, 3 axis.

0.02

Vibration

GRMS

Options

DESCRIPTION

Cover

NOTES

SIZE IMPACT

Add ‘C’ suffix to model number or order part number 412-59585-G separately.

For convection cooled applications, derate output power to 65 watts on all multiple

output models and MAP80-1005. Derate MAP80-1012 and MAP80-1024 to 75 watts.

7.20" x 4.20" x 2.05"

(183.0mm x 107.0mm x 52.0mm)

JUN 07, 2006 revised to AUG 10, 2006

Page 3 of 4

www.power-one.com

MAP80 AC-DC Series Data Sheet

OVERALL SIZE: 7.20" x 4.20" x 1.80" (182.9mm x 106.7mm x 45.7mm)

WEIGHT: 1.8 LBS (0.82 kg)

INPUT & OUTPUT CONNECTIONS: 6-32 SCREW WIRE CLAMPS ON 0.312" (7.9mm) CENTERS, 0.045" (1.1mm)

SQUARE PINS ON 0.156" (3.9mm) CENTERS, MATES WITH MOLEX SERIES 2139, 6442, OR 41695

POWER FAIL CONNECTIONS: J1: 0.035" (0.9mm) SQUARE PINS ON 0.100" (2.5mm) CENTERS, MATES WITH MOLEX SERIES 2695/6471

CHASSIS: 0.090" (2.3mm) ALUMINUM ALLOY, WITH CLEAR FINISH

NUCLEAR AND MEDICALAPPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components

in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective

divisional president of Power-One, Inc.

TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the

date manufactured. Specifications are subject to change without notice.

JUN 07, 2006 revised to AUG 10, 2006

Page 4 of 4

www.power-one.com

相关型号：