NVS0.9EE-M6 [POWER-ONE]
NV Series: 4 - 6W DC/DC Converters 9-36V, 18-36V, 36-72V & 16-75V Inputs 3.3V, 5.0V, 12V, 15V, 【5.0V, 【12V, 【15V & 【24V Outputs; NV系列： 4 - 6W DC / DC转换器9-36V ， 18-36V ， 36-72V和16-75V输入3.3V ， 5.0V ， 12V ， 15V ， 5.0V 【 【 12V ， 15V 【 【 ＆ 24V输出
| 型号： | NVS0.9EE-M6 |
| 厂家： | 
POWER-ONE |
| 描述： | NV Series: 4 - 6W DC/DC Converters 9-36V, 18-36V, 36-72V & 16-75V Inputs 3.3V, 5.0V, 12V, 15V, 【5.0V, 【12V, 【15V & 【24V Outputs |
| 文件： | 总11页 (文件大小：226K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Features
·
·
·
Single board design
8.5 mm height profile
Excellent co-planarity
·
·
·
·
Input/output isolation: 1500 Vdc
Low conducted and radiated EMI
Output overcurrent protection
Parallel and series connection providing
flexible output voltages and power
Full rated output power at 71ºC with
convection cooling
Applications
·
·
·
·
·
Distributed power architectures
·
·
Operating temperature to 110ºC
Telecommunications equipment
LAN/WAN applications
Data processing
UL, CSA and EN/IEC60950 (3rd ed.) approved
Description
The NV series of converters are low profile, single and dual outputs, DC/DC converters intended for SMT
placement and reflow soldering. The product provides on-board conversion of a wide range of standard
telecom and datacom input voltages to isolated low output voltages. Proprietary patented manufacturing
process with full process automation ensures optimal product quality in an extremely small footprint.
Selection Chart – Single output
Model
Input
voltage,
Vdc
Input
Output
Output rated
Output ripple
and noise,
mVp-p
Efficiency,
%
current,
voltage,
Vdc (Vo) Adc (Io.Max)
current,
max, Adc
NVS01YG-M6
NVS0.5YH-M6
NVS0.4YJ-M6
NVS01ZE-M6
NVS0.5ZH-M6
NVS0.4ZJ-M6
NVS0.9CE-M6
NVS0.7CG-M6
NVS0.3CH-M6
NVS0.3CJ-M6
NVS0.9EE-M6
NVS0.7EG-M6
NVS0.3EH-M6
NVS0.3EJ-M6
18-36
18-36
18-36
36-75
36-75
36-75
9-36
9-36
9-36
9-36
0.27
0.33
0.33
0.17
0.17
0.17
0.45
0.55
0.65
0.65
0.33
0.33
0.33
0.33
5.0
12
15
5.0
12
1.0
0.5
0.4
1.0
0.5
0.4
0.9
0.7
0.34
0.28
0.9
0.7
0.34
0.28
50
95
120
50
95
120
50
50
95
120
82
83
84
82
82
84
79
81
82
82
80
81
82
82
15
3.3
5.0
12
15
3.3
5.0
18-75
18-75
18-75
18-75
50
50
95
120
12
15
Continued next page
18-Oct-01
Rev 1.0
Page 1 of 11
www.power-one.com
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Continued from previous page
Selection Chart – Dual Outputs
Model
Input
voltage,
Vdc
Input
current,
max, Adc
0.27
Output
voltage,
Vdc (Vo) Adc (Io.Max)
Output rated
current,
Output ripple
and noise,
mVp-p
Efficiency,
%
NVD01YGG-M6
NVD0.5YHH-M6
NVD0.3YJJ-M6
NVD01ZGG-M6
NVD0.5ZHH-M6
NVD0.3ZJJ-M6
NVD0.7CGG-M6
NVD0.3CHH-M6
NVD0.3CJJ-M6
NVD0.1CKK-M6
NVD0.7EGG-M6
NVD0.3EHH-M6
NVD0.3EJJ-M6
NVD0.1E KK-M6
18-36
±5.0
±12
±15
±5.0
±12
±15
±5.0
±12
±15
±24
±5.0
±12
±15
±24
±0.50
±0.25
±0.14
±0.50
±0.25
±0.14
±0.35
±0.17
±0.14
±0.08
±0.35
±0.17
±0.14
±0.08
60
82
83
84
82
83
84
81
82
82
83
81
82
82
83
18-36
18-36
36-75
36-75
36-75
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
0.33
0.33
0.17
0.17
0.17
0.65
0.65
0.65
0.65
0.33
0.33
0.33
0.33
100
120
60
100
120
50
95
120
190
50
95
120
190
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect
long term reliability and cause permanent damage to the converter. Specifications apply over specified input
voltage, output load and temperature range, unless otherwise noted.
Parameter
Operating CaseTemp. (Tc)
Storage Temperature (Ts)
Conditions/Description
At 100% load
Min
-40
-55
Max
110
120
Units
°C
°C
Environmental and Mechanical Specifications
Parameter
Conditions/Description
Min
Nom
Max
100
Units
g
Shock
IEC68-2-27
Sinusoidal Vibration
Weight
Water Washing
MTBF
IEC68-2-6
10
0.4/12
g
oz/g
N/A
kHrs
Standard process
Per Bellcore TR-NWT-000332
Yes
3,000
Isolation Specifications
Parameter
Conditions/Description
Vin = Vin.Min – Vin.Max
Min
Nom
Operational
Max
Units
N/A
Vdc
MOhm
pF
Insulation Safety Rating
Isolation Voltage (Vps)
Isolation Resistance (Rps)
Isolation Capacitance (Cps)
1,500
10
1,100
18-Oct-01
Rev 1.0
Page 2 of 11
www.power-one.com
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Input Specifications (9-36V)
Parameter
Input voltage (Vin)
Transient Input Voltage (Vint)
Input Current when Shutdown
Turn-On Input Voltage 9-36 Vin
Turn-Off Input Voltage 9-36 Vin
Turn-On Time
Conditions/Description
Continuous
Transient, 100ms
Vin.Nom, Iout = 0A
Ramping Up, Io.Max
Ramping Down, Io.Max
To Output Regulation Band
Rise Time
Min
9
Nom
Max
36
40
20
9
9
Units
Vdc
Vdc
mAdc
Vdc
Vdc
10
8.5
8.5
250
10
8
8
500
ms
ms
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
0.6
mAp-p
mF
Switching Frequency
Vin.Nom, Io.Max
250
kHz
Temperature Coefficient
0.02
%Vo/°C
Input Specifications (18-36V)
Conditions/Description
Continuous
Transient, 100ms
Vin.Nom, Iout = 0A
Ramping Up, Io.Max
Ramping Down, Io.Max
To Output Regulation Band
Rise Time
Min
18
Nom
Max
36
40
20
18
Units
Vdc
Vdc
mAdc
Vdc
Vdc
ms
ms
Parameter
Input voltage (Vin)
Transient Input Voltage (Vint)
Input Current when Shutdown
Turn-On Input Voltage 9-36 Vin
Turn-Off Input Voltage 9-36 Vin
Turn-On Time
10
17
17
250
10
16
16
18
500
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
0.6
mAp-p
mF
Input Specifications (16-75V)
Parameter
Input voltage (Vin)
Conditions/Description
Continuous
Min
16
Nom
Max
75
Units
Vdc
Transient Input Voltage (Vint)
Input Current when Shutdown
Turn-On Input Voltage 9-36 Vin
Turn-Off Input Voltage 9-36 Vin
Turn-On Time
Transient, 100ms
100
10
16
16
500
Vdc
mAdc
Vdc
Vdc
ms
ms
Vin.Nom, Iout = 0A
Ramping Up, Io.Max
Ramping Down, Io.Max
To Output Regulation Band
Rise Time
8
15
15
250
10
14
14
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
0.3
mAp-p
mF
Input Specifications (36-75V)
Parameter
Input voltage (Vin)
Conditions/Description
Continuous
Min
36
Nom
Max
75
Units
Vdc
Transient Input Voltage (Vint)
Input Current when Shutdown
Turn-On Input Voltage 9-36 Vin
Turn-Off Input Voltage 9-36 Vin
Turn-On Time
Transient, 100ms
100
10
36
36
500
Vdc
mAdc
Vdc
Vdc
ms
ms
Vin.Nom, Iout = 0A
Ramping Up, Io.Max
Ramping Down, Io.Max
To Output Regulation Band
Rise Time
8
34
34
250
10
32
32
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
0.3
mAp-p
mF
18-Oct-01
Rev 1.0
Page 3 of 11
www.power-one.com
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Output Specifications
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
All Models
Parameter
Output Voltage Accuracy
Line Regulation
Conditions/Description
Vin.Nom, 50% Io.Max
Vin.Min to Vin.Max, 50% Io.Max
Vin.Nom, Io.Min to Io.Max
3.3Vo
Min
Nom
Max
±1
±1
Units
%Vo
%Vo
Load Regulation
±3.5
±3.0
%Vo
%Vo
Other Output Voltages
Maximum Output Capacitance
Total, for single and dual outputs
3.3Vo
5Vo, ±5Vo
12Vo, ±12Vo
680
680
150
mF
mF
mF
15Vo, ±12Vo
±24Vo
100
45
mF
mF
Dynamic Regulation
Peak Deviation
Settling Time
50-100% Io.Max load step
change
to 1% error band
Vin.Min to Vin.Max, Io.Min to Io
Max, 20MHz Bandwidth
3.3Vo
5.0
1.0
%Vo
ms
Output Voltage Ripple
50
80
mVp-p
5Vo, ±5Vo
12Vo, ±12Vo, ±24Vo
50
0.8
80
1
mVp-p
%Vo p-p
Output Current Limit Threshold
Switching Frequency
Output Current Limit Threshold
Vin.Nom, Io.Max
120
200
%Io.Max
KHz
250
Temperature Coefficient
0.02
%Vo/°C
Typical characteristic curves for single 5V output type
Output Voltage Vs Load
Vout (V)
Efficiency Vs Load
Efficiency
6.00
90%
80%
5.00
70%
4.00
60%
50%
3.00
40%
30%
2.00
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
20%
10%
0%
1.00
0.00
25% 50% 75% 100%
Iout (A)
Iout (A)
18-Oct-01
Rev 1.0
www.power-one.com
Page 4 of 11
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Temperature Derating Curves
The derating curves below give an indication of
Temperature derating for 9-36V and 18-75V input
voltage ranges :
the output power achievable with and without
forced air-cooling. However in the final application
the temperature rise of the converter is also
influenced by factors such as heat conduction
through the leads to the PCB, orientation, the
temperature of surrounding components and the
Output Power Vs Ambient Temp. & Airflow
120
input voltage. To ensure the reliability of the
converter, care must be taken to guarantee that
the maximum case temperature is not exceeded
under any conditions. The measurement point for
case temperature is specified on the mechanical
drawing (Tc).
100
80
60
Temperature derating for 18-36V and 36-75V
input voltage ranges :
200LFM (1 m/s)
40
0 LFM
20
Output Power Vs Ambient Temp. & Airflow
0
120
Ambient Temp. (deg °C)
100
80
Typical Application
400LFM (2 m/s)
200LFM (1 m/s)
0 LFM
60
40
20
0
This series of converters does not require any
external components for proper operation.
However, if the distribution of the input voltage to
the converter contains significant inductance, a
capacitor across the input terminals may be
required to stabilize the input voltage. A minimum
of 0.47µF, quality electrolytic / ceramic capacitor
is recommended for this purpose. For output
decoupling it is recommended to connect, directly
across the output pins,
a
0.47µF ceramic
Ambient Temp. (deg °C)
capacitor (for 3.3V and 5V outputs) or a 0.27µF
ceramic capacitor (for other outputs).
Care must be taken to ensure the maximum rated
The 9-36V and 18-75V input voltage versions of
this series feature a 4:1 input voltage range and
can achieve operation at full power at 85ºC
output capacitance for the device is not exceed
when dimensioning decoupling capacitors in the
system as this could cause the unit to detect an
overload and enter a ‘hiccup’ mode of operation.
ambient temperature with only convection cooling.
18-Oct-01
Rev 1.0
www.power-one.com
Page 5 of 11
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Output Current Limiting
In order for the output of the converter to be
considered as SELV (Safety Extra Low Voltage)
or TNV-1, according to EN60950 / UL1950 /
When the output is overloaded above the
maximum output current rating, the voltage will
CSA60950-00, one of the following requirements
must be met in the system design:
start to reduce to maintain the output power to a
safe level. In a condition of high overload or
short-circuit where the output voltage is pulled
below approximately 30% of Vo.Nom, the unit will
enter a ‘Hiccup’ mode of operation. Under this
condition the unit will attempt to restart,
·
The converter has no internal fuse.
external fuse must be provided to protect the
system from catastrophic failure. The
recommended fuse values are shown below:
An
approximately every 100ms until the overload has
cleared.
Input Voltage Range
36-75V
18-36V
Recommended Fuse
F0.315A
F0.5A
Parallel Operation
9-36V
18-75V
F1.0A
F0.5A
Paralleling of two converters is possible by direct
connection of the output voltage terminal pins.
The load regulation characteristic is designed to
facilitate current sharing (typically ± 20%).
·
The user can select a lower rating fuse based
upon the inrush transient and the maximum
input current of the converter, which occurs at
the minimum input voltage. Both input traces
and the chassis ground trace (if applicable)
must be capable of conducting a current of 1.5
times the value of the fuse without opening.
Series Operation
The outputs of two units may be connected in series to
achieve a higher system voltage.
The fuse must not be placed in the grounded
input line, if any.
Safety Considerations
These converters feature 1500 Volt DC isolation
·
·
If the voltage source feeding the module is
SELV, the output of the converter is
considered SELV and may be grounded or
from input to output.
resistance is greater than 10MOhm.
converters are provided with Operational
The input to output
These
ungrounded.
Insulation between input and output circuits
according to EN60950 / UL1950 / CSA60950-00.
Nevertheless, if the system using the converter
needs to receive safety agency approval, certain
rules must be followed in the design of the
The circuitry of the converter may generate
transients, which exceed the input voltage.
Even if the input voltage is SELV (<60V) the
components on the primary side of the
system. In particular, all of the creepage and
clearance requirements of the end-use safety
converter may have to be considered as
hazardous. A safety interlock may be needed
to prevent the user from accessing the
converter while operational.
requirements must be observed.
These
documents include UL60950, CSA60950-00 and
EN60950, although specific applications may
have additional requirements.
18-Oct-01
Rev 1.0
www.power-one.com
Page 6 of 11
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
EMC Specifications
Conducted Noise:
The converters meet the requirements of
EN55022, CISPR22 and FCC CFR title 47 part 15
Sub-part J - Conducted (conducted noise on the
input terminals) without any external components.
The results for this solution are displayed below.
To meet level B for the above standards it is
necessary to fit a 3.3µF ceramic capacitor across
the input terminals.
dbµV
Conducted EMI (Input Terminals)
80
EN55022 A QP.
70
EN55022 A AV.
60
50
40
30
20
10
0
1.E+05
0.1
1.E+06
1
1.E+07
10
1.E+08
30
FREQ (MHz)
Electromagnetic Susceptibility:
Standard
Applied
Stress
Class Performance
Level
Outcome *
Electrostatic
Discharge
EN61000-4-2
2KV to
pins
1
B
Electromagnetic
Field
EN61000-4-3
3V/m
2
A
Electrical Fast
Transient
EN61000-4-4
2000 Vp
to input
3
2
B
B
Conducted
Disturbances
EN61000-4-6
3Vrms to
input
* A denotes normal operation, no deviation from
specification. B denotes temporary deviation from
specification is possible.
18-Oct-01
Rev 1.0
www.power-one.com
Page 7 of 11
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Surface Mount Assembly
Max. temp. on pins 1 and 10 during reflow
soldering (deg C)
Soldering:
300
250
200
150
100
50
Peak Temperature
(See fig below)
The following instructions must be observed when
soldering the unit.
Failure to observe these
instructions may result in failure or significant
degradation of the module performance. Power-
One will not honor any warranty claims arising
from failure to observe these instructions.
tp
This product is approved for forced convection
reflow soldering only.
0
The curves below define the maximum peak
reflow temperature permissible measured on
Pins 1 and 10 of the converter.
190 – 450 s
Time (s)
The lead-frame is constructed for
temperature glass filled, UL94V0 flame retardant,
diallyl ortho-phthalate moulding compound
commonly used for packaging of electronics
components. It has passed NASA outgassing
tests and is certified to MIL-M-14. The coefficient
of thermal expansion is equivalent to FR4.
a
high
Restriction curve above 215ºC
Peak temp. at pins 1 and 10 (ºC)
245
240
235
230
225
220
215
210
205
200
The gull wing leads are formed to ensure optimal
solder joint strength and structure. Furthermore
they facilitate optical inspection (manual or
automatic). The leads are formed from a 97% Cu
alloy plated with Cu and Sn 90. This material is
10
20
30
40
50
60
commonly used in the manufacture of integrated
circuits. It has good corrosion resistance and
exhibits the nobility inherent to all high copper
alloys. Unlike brasses, this material is essentially
immune to stress corrosion cracking. It also
tp (s)
Pick & Place Assembly:
exhibits excellent solderability.
wetted by solders and performs well in standard
solderability tests. (Dip of Class II or better).
It is readily
The product is designed with a large flat area in
the center of the top surface to serve as a pick up
point for automated vacuum pick and place
equipment. The ‘open board’ construction of the
unit ensures that weight is kept to a minimum.
However due to the relatively large size of the
component, a large nozzle (> 2.0mm, depending
The product is manufactured with a patented
process, which is fully automated, and ‘in-line’.
This ensures that there is no contamination or
mechanical stress on the lead-frame so that the
co planarity and solderability are maintained.
on vacuum pressure) is recommended for picking
and placing.
The unit may also be automatically handled using
‘odd-form’ placement equipment, with mechanical
grippers. For this type of equipment the end
edges of the device, which have no leads and
The product is shipped in JEDEC trays to
guarantee preservation of the co-planarity and
enable fully automated assembly in the final
application.
also feature the greatest dimensional accuracy,
should be used as pick-up points.
18-Oct-01
Rev 1.0
www.power-one.com
Page 8 of 11
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Mechanical Drawing
Note:- mm [inches]
Tolerances: -
0.5-10 ±0.1
10-100 ±0.2
18-Oct-01
Rev 1.0
Page 9 of 11
www.power-one.com
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
18-Oct-01
Rev 1.0
Page 10 of 11
www.power-one.com
Product Specifications
Oct 2001
NV Series: 4 - 6W DC/DC Converters
9-36V, 18-36V, 36-72V & 16-75V Inputs
3.3V, 5.0V, 12V, 15V, ±5.0V, ±12V, ±15V & ±24V Outputs
Pin-Out
Pin
Function
Reference
Single Output
Dual Output
1
2
+Vin
-Vin
+Vin
-Vin
Primary
Primary
3
-Vin
-Vin
Primary
4
5
6
7
No Pin
No Pin
No Pin
No Pin
No Pin
No Pin
No Pin
No Pin
No Pin
-
-
-
-
8
No Pin
-
9
No Connection
No Connection
No Connection
-Vo
No Connection
Vo Return / Common
Secondary
Secondary
Secondary
Secondary
Secondary
Secondary
Secondary
Secondary
-
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
-Vo
-Vo
-Vo
+Vo
+Vo
No Connection
No Connection
No Connection
No Pin
+Vo
Vo Return / Common
No Pin
No Pin
No Pin
No Pin
No Pin
+Vi
No Pin
No Pin
No Pin
No Pin
+Vi
+Vi
-Vi
-
-
-
-
Primary
Primary
Primary
+Vi
-Vi
Ordering Information
Options
Suffixes to part number
Surface Mount Version, shipped
in JEDEC Tray
Suffix “–M6”.
Through hole (leaded) version.
Consult factory for availability.
Notes
1. Consult factory for the complete list of available options.
2. Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous
environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
3. Specifications are subject to change without notice.
18-Oct-01
Rev 1.0
Page 11 of 11
www.power-one.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明