PFC375-4201 [POWER-ONE]

PerFormanCe POWER; 高性能电源


型号：	PFC375-4201
厂家：	POWER-ONE
描述：	PerFormanCe POWER 高性能电源
文件：	总4页 (文件大小：221K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PerFormanCe POWER PFC375

The PFC375 products of the PerFormanCe Power series

(LFM) forced-air cooling (factory installed fan optional). Other

features include remote sense, power fail, logic level inhibit, and

DC power good. Main channel current sharing is provided for

redundant applications. The PFC375 is available with SAE

mountings or optional metric mountings.

incorporate high performance midrange power, active Power

Factor Correction (PFC), and high reliability to meet varied

commercial and industrial requirements.

Providing tightly regulated DC power in a wide variety of single

and multiple output configurations, the PFC375 is designed to

provide full output power with only 300 Linear Feet per Minute

The PFC375 product line is approved to the latest international

regulatory standards, and displays the CE Mark.

FEATURES

•

Power Factor Correction (PFC) Meets EN61000-3-2

Fully Regulated Outputs

Main Output Remote Sense

Current Share, Power Fail, and Power Good Signals

Overtemperature, Overvoltage, and Overcurrent Protected

Available with Metric and SAE Mountings

Input Transient & ESD Compliance to EN61000-4-2/-3/-4/-5

Fan Output Voltage and Optional Fan

SINGLE OUTPUT MODEL SELECTION CHART

OUTPUT

ADJUSTMENT

MAXIMUM OUTPUT

CURRENT (NOTE 1)

LINE

REGULATION

LOAD

REGULATION

RIPPLE & NOISE

%p-p (NOTE 2)

INITIAL SETTING

ACCURACY

MODEL

VOLTAGE

RANGE

PFC375-1012

PFC375-1015

PFC375-1024

PFC375-1028

PFC375-1048

12V

15V

24V

28V

48V

10.8V to 13.5V

12.0V to 17.0V

21.6V to 26.4V

25.2V to 30.8V

46.0V to 56.0V

30A

25A

15A

13.4A

7.8A

0.2%

0.5%

0.8%

0.6%

0.8%

0.9%

1.0%

0.9%

11.94V to 12.06V

14.94V to 15.06V

23.88V to 24.12V

27.86V to 28.14V

47.52V to 48.48V

NOTES: 1) Output currents ratings are expressed with 300 LFM forced air.

2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.

MULTIPLE OUTPUT MODEL SELECTION CHART - ^{ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS}

OUTPUT

ADJUSTMENT

OUTPUT

PEAK OUTPUT

LINE

LOAD

RIPPLE & NOISE

INITIAL SETTING

ACCURACY

MODEL

VOLTAGE

RANGE

CURRENT (NOTE 1)

CURRENT (NOTE 2)

REGULATION

%p-p (NOTE 3)

+5V

+12V

12V

4.5V to 5.5V

11.3V to 12.6V

Fixed

3.5 - 40A

10A

3.5 - 40A

10A

3.5 - 40A

10A

3.5 - 40A

10A

40A

16A

0.4%

0.9%

0.8%

0.9%

2.4%

4.98V to 5.02V

11.9V to 12.1V

4.9V to 5.1V

PFC375-4000

+5V

+12V

12V

+5V

+12V

12V

24V

+5V

+12V

15V

4.5V to 5.5V

40A

16A

0.4%

0.9%

0.4%

0.9%

0.5%

0.4%

0.9%

0.7%

0.8%

0.9%

0.8%

0.9%

0.8%

0.9%

0.7%

4.98V to 5.02V

11.9V to 12.1V

4.98V to 5.02V

11.9V to 12.1V

23.8V to 24.2V

4.98V to 5.02V

11.9V to 12.1V

14.9V to 15.1V

11.3V to 12.6V

11.0V to 16.0V

4.5V to 5.5V

11.3V to 12.6V

22.0V to 28.0V

4.5V to 5.5V

PFC375-4001

PFC375-4002

PFC375-4004

40A

16A

40A

16A

11.3V to 12.6V

14.2V to 15.8V

REV. 07/01

PerFormanCe POWER PFC375

MULTIPLE OUTPUT MODEL SELECTION CHART (CONT.) - ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS

OUTPUT

VOLTAGE

ADJUSTMENT

RANGE

OUTPUT

CURRENT (NOTE 1)

PEAK OUTPUT

CURRENT (NOTE 2)

LINE

REGULATION

LOAD

REGULATION

RIPPLE & NOISE

%p-p (NOTE 3)

INITIAL SETTING

ACCURACY

MODEL

+5V

+12V

24V

+24V

+5V

12V

+24V

+5V

15V

4.5V to 5.5V

11.3V to 12.6V

22.0V to 28.0V

21.5V to 26.4V

4.5V to 5.5V

11.4V to 12.6V

21.5V to 26.4V

4.5V to 5.5V

3.5 - 40A

10A

40A

16A

0.4%

0.9%

0.5%

0.4%

0.5%

0.4%

0.5%

0.8%

0.9%

0.8%

4.98V to 5.02V

11.9V to 12.1V

23.8V to 24.2V

4.98V to 5.02V

11.9V to 12.1V

23.8V to 24.2V

4.98V to 5.02V

14.9V to 15.1V

PFC375-4005

(Note 4)

1 - 10A

10A

1 - 10A

10A

16A

PFC375-4200

PFC375-4201

10A

16A

0.8%

14.2V to 16.0V

13.7V to 16.0V

+5V

+12V

12V

4.5V to 5.5V

11.3V to 12.6V

4.5V to 5.5V

3.5 - 50A

10A

50A

16A

0.4%

0.9%

0.8%

0.9%

4.98V to 5.02V

11.9V to 12.1V

4.9V to 5.1V

PFC375-4500

NOTES: 1) Output currents ratings are expressed with 300 LFM forced air.

2) Peak loads up to 450 Watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 450 Watts.

3) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.

4) V3 and V4 may be series connected to obtain 48V.

INPUT SPECIFICATIONS

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

VAC

Input Voltage - AC

Input Frequency

Brown Out Protection

Hold-Up Time

Continuous input range.

AC Input.

Lowest AC input voltage that regulation is maintained with full rated loads.

Over full AC input voltage range at full rated load.

85 VAC at full rated load.

264

Input Current

ARMS

Input Protection

Inrush Surge Current

Non-user serviceable internally located AC input line fuse, F10A, 250V.

Internally limited by thermistor, one cycle, 25°C.

110 VAC

220 VAC

APK

Power Factor

Operating Frequency

Per EN61000-3-2.

Switching frequency of main transformer.

0.98

W/VA

kHz

100

OUTPUT SPECIFICATIONS

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Efficiency

Full rated load, 110 VAC. Varies with distribution of loads among outputs.

Single output models.

Minimum Loads

Multiple output models, 5V main output only.

Multiple output models, 24V main output only.

Full load, 20MHz bandwidth.

300 LFM forced air cooling required for operation. See optional fan.

Continuous power, multiple output models.

Peak power, all models.

Output voltage overshoot/undershoot at turn-on.

Varies by output. Total regulation includes: line changes from 85-132 VAC or

170-264 VAC, changes in load starting at 20% load and changing to 100% load.

3.5

Amps

Ripple and Noise

Output Power

See Model Selection Charts

375

450

Watts

Overshoot / Undershoot

Regulation

See Model Selection Charts

Transient Response

Recovery time, to within 1% of initial set point due to a 50-100% load change,

3% max. deviation. (Main output only on multi-output units).

Turn-On Delay

Turn-On Rise Time

Time required for initial output voltage stabilization.

Time required for output voltage to rise from 10% to 90%.

Sec

PerFormanCe POWER PFC375

INTERFACE SIGNALS AND INTERNAL PROTECTION

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Overvoltage Protection

Provided on single output units and the main output only of multiple output units.

PFC375-30XX, PFC375-40XX, PFC375-45XX

PFC375-1012

6.0

6.4

13.5

17.0

27.0

30.8

60.0

27.0

15.5

19.5

30.7

35.0

70.0

30.7

PFC375-1015

PFC375-1024

PFC375-1028

PFC375-1048

PFC375-42XX

Overload Protection

Overtemperature Protection

Remote Sense

Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition.

System shutdown due to excessive internal temperature, automatic reset.

Total voltage compensation for cable losses with respect to the main output.

Accuracy of shared current with up to 6 parallel units.

250

Current Share

Inhibit

TTL compatible logic signal will inhibit outputs by the application of a logic low signal.

An open circuit or external TTL high signal allows normal operation.

Input Power

Fail Warning

Power Good

Fan Voltage

TTL compatible logic signal. Time before regulation dropout due to

loss of input power at 110 VAC.

TTL compatible signal. Signal is low if main output is greater or less than 10% of nominal.

Provides 170 mA current to user-supplied fan, if fan option is not selected.

SAFETY, REGULATORY, AND EMI SPECIFICATIONS

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Agency Approvals

UL1950.

CSA 22.2 NO. 234/950.

EN60950 (TÜV).

Input to output.

FCC CFR title 47 Part 15 Sub-Part B - Conducted.

EN55022 / CISPR 22 Conducted.

Approved

Dielectric Withstand Voltage

Electromagnetic Interference

2600

VDC

Class

ESD Susceptibility

Radiated Susceptibility

EFT/Burst

Per EN61000-4-2, level 4.

Per EN61000-4-3, level 3.

Per EN61000-4-4, level 4.

Per EN61000-4-5 class 3.

V/M

Input Transient Protection

Line to Line

Line to Ground

Insulation Resistance

Leakage Current

Input to output.

Per EN60950, 264 VAC.

M⍀

2.0

ENVIRONMENTAL SPECIFICATIONS

PARAMETER

CONDITIONS/DESCRIPTION

MIN

NOM

MAX

UNITS

Altitude

Operating.

Non-Operating.

10k

40k

ASL Ft.

Operating Temperature

At 100% load

At 50% load

°C

Derate linearly above 50°C by 2.5% per °C.

Storage Temperature

Forced Air Cooling

-55

°C

Forced air cooling of 300 LFM is required if the internal fan option is not specified.

Cooling air velocity is measured 1/4" above, at the middle of the chassis.

Airflow direction is from the input section to the output section.

Temperature Coefficient

Relative Humidity

Shock

0°C to 70°C (after 15-minute warmup).

Non-Condensing.

Operating: 10 3mS, 3 axis, Halfsine.

0.02

0.05

%/°C

%RH

Non-operating: 10 3mS, 3 axis, Halfsine.

Vibration

Operating:

5-32 Hz

32-2000 Hz Sinusoidal

0.02

in (DA)

GRMS

Non-operating:

6.15

GRMS

PerFormanCe POWER PFC375

OPTIONS

DESCRIPTION

NOTES

SIZE IMPACT

Fan

Add “F” as a suffix to the model number to order integral fan.

(provides required 300 LFM of forced air cooling).

10.50" x 5.00" x 2.50"

(266.7mm x 127.0mm x 63.5mm)

Metric Mounting

Add “M” as a suffix to the model number to order chassis with

M4 x 0.7 mounting inserts.

9.00" x 5.00" x 2.50"

(228.6mm x 127.0mm x 63.5mm)

OVERALL SIZE: 9.00" x 5.00" x 2.50" (228.6mm x 127.0mm x 63.5mm)

OVERALL LENGTH WITH FAN: 10.50" (266.7mm)

WEIGHT: 4.3 LBS (1.95 kg)

INPUT & OUTPUT CONNECTIONS: 6-32 SCREW TERMINAL ON 0.375" (9.5mm) CENTERS

BUS BAR MAIN OUTPUT, E1 & E2, 10-32 SCREW TERMINAL

CHASSIS: 0.090" (2.3mm) ALUMINUM ALLOY, WITH CLEAR FINISH

相关型号：