8PM-11-0004-02-131 [PREDIP]

SPRING-LOADED CONNECTORS & PAD CONNECTORS;


型号：	8PM-11-0004-02-131
厂家：	PRECID-DIP DURTAL SA
描述：	SPRING-LOADED CONNECTORS & PAD CONNECTORS PC 连接器
文件：	总2页 (文件大小：18K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SPRING-LOADED CONNECTORS & PAD CONNECTORS

8PM-11-00NN-02-131

Single Row

2.54 mm, Surface mount parallel

SERIES

8PM

Connectors with spring-loaded contacts (SLC), surface

mount.

TECHNICAL SPECS.:

Flammability

UL 94V-O

Piston and barrel

Spring

Brass CuZn36Pb3 (C36000)

Music wire DIN 17223, gold plated

Max. stroke

1.5 mm

Forces initial

0.2 N

Forces initial at 1/2 stroke

Mechanical life

0.9 N

50'000 cycles

Max. operating current

Contact resistance

Coplanarity SMD terminations

3 A

10 m (static measurement, halfway position)

Max. 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION:

PP Plating code

Barrel

Piston

Gold 0.25 µm

NN number of poles. Replace NN with the requested number of poles, e.g. 8PM-11-00NN-02-131 with 5 pins

becomes 8PM-11-0005-02-131.

PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland

PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com

TECHNICAL ASSISTANCE

GENERAL SPECIFICATIONS:

The values listed below are general specs applying for PRECI-DIP spring-loaded connectors. Please see individual catalog page

for additional and product specific technical data.

Operating temperature range

Climatic category (IEC)

Operating humidity range

Max working voltage

-55 ... +125 °C

55/85/21

annual mean 75 %

100 VRMS/150 VDC (2.54 mm grid)

PRECI-DIP products are recognized by Underwriters Laboratories Inc. and listed under "Connectors for Use in Data, Signal,

Control and Power Applications", File Nr. E174442.

ELECTRICAL CHARACTERISTICS:

Insulation resistance between any two adjacent contacts Min. 10'000 M at 500 V AC

Capacitance between any two adjacent contacts

Max. 1 pF

ENVIRONMENTAL CHARACTERISTICS:

The sockets withstand the following environmental tests without mechanical and electrical defects:

- Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16h

- Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH, 1 cycle of 24 h

- Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h

- Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min

- Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis

- Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis

During the above two tests no contact interruption >50 ns does appear.

- Solderability J-STD-002A, Test A, 245°C, 5 s solder alloy SnAg3.8Cu0.7

- Resistance to soldering heat J-STD-0020C, 260°C, 20 s

- Moisture sensitivity J-STD-020C level 1

- Resistance to corrosion :

1) Salt spray test IEC 60068-2-11.Ka: 48 h

2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2, 25 °C, 75 %rH

3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S, 25 °C, 75 %rH

PACKAGING:

Standard connector packaging is card box.

SMD mount connectors available on request with Tape & Reel packaging acc. to EIA Standard 481.

PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland

PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com

相关型号：