首页 |元器件品牌

PP0080SB-T [PROTEC]

Surge Protection Circuit,;
PP0080SB-T
型号： PP0080SB-T
厂家： PROTEK DEVICES    PROTEK DEVICES
描述：

Surge Protection Circuit,

电信 电信集成电路
文件： 总10页 (文件大小：553K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
PP-SM Series  
Only One Name Means ProTek’Tion™  
THYRISTOR SURGE SUPPRESSOR  
DESCRIPTION  
The PP-SM Series are thyristor surge suppression (TSS) devices designed to protect telecommunicaꢀon equipment  
against lightning and transients induced by AC power lines. These devices can be used on central office equipment,  
PBX, DSU, OCU and other telecommunicaꢀon equiment/systems. The bidirecꢀonal configuraꢀon provides protecꢀon  
for both posiꢀve and negaꢀve transients and the discrete surface mount package allows for individual placement of  
the device on line cards or other locaꢀons where mulꢀple component devices do not offer the versaꢀle in board trace  
layout.  
This series can be used to provide protecꢀon in accordance with industry standards such as FCC Part 68, ANSI C62.41,  
UL 1459, GR-1089-CORE, IEC 61000-2, IEC 61000-4 and IEC 61000-4-5 requirements.  
DO-214AA PACKAGE  
FEATURES  
APPLICATIONS  
• T1/E1 Trunk & Line Cards  
• SLIC Line Card  
• DBX Branch Exchange Switches  
• FCC Part 68 Customer Premise Equipment  
• Line Interface Modem  
• Compaꢀble with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV  
• Compaꢀble with IEC 61000-4-4 (EFT): 40A, 5/50ns  
• Compaꢀble with IEC 61000-4-5 (Surge): 95A, 8/20µs - L4(Line-  
Ground), 48A - L4(Line-Line) & 83A - L2(Power)  
• FCC Part 68, UL 1459, Bellcore 1089 & ITU-K.20/K.21 Compliant  
• UL File Recogniꢀon #E208219  
• xDSL Architecture Interface  
• Peak Off-State Voltage from 25 to 300 Volts  
• Surge Current Capability (See Table 1)  
• ESD Protecꢀon > 25 kilovolts  
• Low Capacitance for T1/E1 Trunk & Line Card Applicaꢀons  
• Bidirecꢀonal Configuraꢀon  
• RoHS Compliant  
• REACH Compliant  
MECHANICAL CHARACTERISTICS  
DEVICE SYMBOL  
BIDIRECTIONAL  
• Molded Plasꢀc DO-214AA Package  
• Approximate Weight: 0.095 grams  
• Lead-Free Pure-Tin Plaꢀng (Annealed)  
• Solder Reflow Temperature:  
Pure-Tin - Sn, 100: 260-270°C  
• Flammability Raꢀng UL 94V-0  
• 12mm Tape and Reel per EIA Standard 481  
TABLE 1 - SURGE RATINGS  
SERIES  
IPP  
2/10µs  
AMPS  
IPP  
8/20µs  
AMPS  
IPP  
IPP  
IPP  
ITSM  
60Hz  
AMPS  
di/dt  
A/µs  
(Note 1)  
dv/dt  
V/µs  
(Note 1)  
10/160µs  
AMPS  
10/560µs  
AMPS  
10/1000µs  
AMPS  
SA  
SB  
SC  
150  
300  
500  
150  
300  
400  
100  
150  
200  
50  
50  
80  
20  
32  
60  
500  
500  
500  
2000  
2000  
2000  
100  
200  
100  
NOTES  
1. Criꢀcal rate of rise for On-State Current (di/dt) and Off-State Voltage (dv/dt).  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 1  
PP-SM Series  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE CHARACTERISTICS  
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified  
PARAMETER  
SYMBOL  
VALUE  
UNITS  
Amps  
°C  
Surge Current - 50/60Hz (SC Series)  
Juncꢀon Temperature  
ITSM  
60  
-40 to 150  
-55 to 150  
28  
TA  
Storage Temperature  
TSTG  
°C  
Thermal Resistance (Juncꢀon) - SA & SB Series  
Thermal Resistance (Juncꢀon) - SC Series  
Thermal Resistance (Ambient) - SA & SB Series  
Thermal Resistance (Ambient) - SC Series  
RQJC  
°C/Waꢁ  
°C/Waꢁ  
°C/Waꢁ  
°C/Waꢁ  
RQJC  
26  
RQJA  
90  
RQJA  
85  
FIGURE 1  
PULSE WAVEFORM  
FIGURE 2  
VI CHARACTERISITC CURVE  
tf  
IPP  
TEST  
WAVEFORM  
PARAMETERS  
tf = 10µs  
ITSM  
100  
IT  
IS  
td = 1000µs  
Peak Value IPP  
IH  
VS  
td = t/(IPP/2)  
IDRM  
50  
VT  
VDRM  
e-t  
0
0
1
2
3
t - Time - ms  
FIGURE 3  
ON-STATE CURRENT VS SURGE CURRENT DURATION  
100  
PPxxxxSA  
PPxxxxSC  
PPxxxxSB  
10  
1
1
10  
100  
Surge Current Duraꢀon ꢁ Full Cycles  
1000  
Supply Frequency ꢁ 60 Hz Sinusoidal  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 2  
PP-SM Series  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE CHARACTERISTICS  
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified  
PART  
NUMBER  
DEVICE  
MARKING  
REPETITIVE SWITCHING MINIMUM SWITCHING MAXIMUM MAXIMUM ON-STATE  
TYPICAL  
CURRENT CAPACITANCE  
(Note 1)  
PEAK  
OFF-STATE  
VOLTAGE  
VOLTAGE  
HOLDING  
CURRENT  
(Fig. 7)  
CURRENT  
OFF-STATE  
CURRENT  
(Fig. 4ꢃ  
ꢂVDRM  
IDRM  
ON-STATE  
VOLTAGE  
(Fig. 5)  
ꢂIT  
ꢂ100V/µs di/dt = 1A/ms  
ꢂ2V, 1MHz  
VDRM  
VS  
IH  
IS  
VT  
IT  
C
VOLTS  
VOLTS  
mA  
mA  
µA  
VOLTS  
AMPS  
pF  
PP0080SA  
PP0300SA  
PP0640SA  
PP0720SA  
PP0800SA  
PP1100SA  
PP1300SA  
PP1500SA  
PP1800SA  
PP2300SA  
PP2600SA  
PP3100SA  
PP3500SA  
PP0080SB  
PP0300SB  
PP0640SB  
PP0720SB  
PP0800SB  
PP1100SB  
PP1300SB  
PP1500SB  
PP1800SB  
PP2300SB  
PP2600SB  
PP3100SB  
PP3500SB  
PP0080SC  
PP0300SC  
PP0640SC  
PP0720SC  
PP0800SC  
PP1100SC  
PP1300SC  
NOTES  
GA  
GB  
GC  
GD  
GE  
GF  
GG  
GH  
GI  
6
25  
40  
50  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
50  
60  
60  
60  
60  
60  
40  
40  
40  
30  
30  
30  
30  
60  
110  
60  
60  
60  
60  
40  
40  
40  
30  
30  
30  
30  
75  
60  
120  
120  
120  
120  
80  
25  
50  
58  
77  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
50  
65  
88  
75  
98  
90  
130  
160  
180  
220  
260  
300  
350  
400  
25  
120  
140  
160  
190  
220  
275  
300  
6
GJ  
GK  
GL  
GM  
FA  
GN  
GP  
GQ  
GR  
GS  
GT  
GU  
GV  
GW  
GX  
GY  
GZ  
HA  
HB  
HC  
HD  
HE  
HF  
HG  
25  
40  
50  
58  
77  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
50  
65  
88  
75  
98  
90  
130  
160  
180  
220  
260  
300  
350  
400  
25  
120  
140  
160  
190  
220  
275  
300  
6
25  
40  
50  
58  
77  
150  
150  
150  
150  
150  
65  
88  
75  
98  
90  
130  
160  
120  
1. Capacitance imblance between posiꢀve and negaꢀve polariꢀes is typically < 15pF.  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 3  
PP-SM Series  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE CHARACTERISTICS  
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified  
PART  
NUMBER  
DEVICE  
MARKING  
REPETITIVE SWITCHING MINIMUM SWITCHING MAXIMUM MAXIMUM ON-STATE  
TYPICAL  
CURRENT CAPACITANCE  
(Note 1)  
PEAK  
OFF-STATE  
VOLTAGE  
VOLTAGE  
HOLDING  
CURRENT  
(Fig. 7)  
CURRENT  
OFF-STATE  
CURRENT  
(Fig. 4ꢃ  
ꢂVDRM  
IDRM  
ON-STATE  
VOLTAGE  
(Fig. 5)  
ꢂIT  
ꢂ100V/µs di/dt = 1A/ms  
ꢂ2V, 1MHz  
VDRM  
VS  
IH  
IS  
VT  
IT  
C
VOLTS  
VOLTS  
mA  
mA  
µA  
VOLTS  
AMPS  
pF  
PP1500SC  
PP1800SC  
PP2300SC  
PP2600SC  
PP3100SC  
PP3500SC  
NOTES  
HH  
HI  
140  
160  
190  
220  
275  
300  
180  
220  
260  
300  
350  
400  
150  
150  
150  
150  
150  
150  
800  
800  
800  
800  
800  
800  
5
5
5
5
5
5
4
4
4
4
4
4
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
80  
80  
60  
60  
60  
60  
HJ  
HK  
HL  
HN  
1. Capacitance imblance between posiꢀve and negaꢀve polariꢀes is typically < 15pF.  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 4  
PP-SM Series  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE CHARACTERISTICS  
FIGURE 4  
TYPICAL PEAK OFF-STATE CURRENT  
FIGURE 5  
TYPICAL PEAK ON-STATE CURRENT  
VS ON-STATE VOLTAGE  
VS JUNCTION TEMPERATURE  
10  
100  
1
10  
0.1  
0.01  
1
ꢁ40  
0
40  
80  
120  
0
1
2
3
4
5
6
7
tA - Temperature - °C  
VT - On-State Voltage - V  
FIGURE 6  
FIGURE 7  
TYPICAL NORMALIZED SWITCHING VOLTAGE  
TYPICAL NORMALIZED HOLDING CURRENT  
VS JUNCTION TEMPERATURE  
VS JUNCTION TEMPERATURE  
1.10  
1
2
1
0
0.9  
0.8  
ꢁ40  
0
40  
80  
120  
ꢁ40  
0
40  
80  
120  
tA - Temperature - °C  
tA - Temperature - °C  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 5  
PP-SM Series  
Only One Name Means ProTek’Tion™  
APPLICATION INFORMATION  
FIGURE 1 - UL 1459 & FCC PART 68 METALLIC PROTECTION  
The TSS (Thyristor Surge Suppressor) device is located across the ꢀp-to-ring aꢂer a limiꢀng resistor and fuse combinaꢀon. RTIP and RRING resistors are opꢀonal de-  
pending upon the TSS device selecꢀon. Without the resistors, the PP3100SB/SC is recommended. However, with a resistance value of 7.5 Ohms for ꢀp and ring, the  
PP3100SA is recommended. Digital signals may use a lower TSS device depending upon the total ꢀp to ring voltage range. Selecꢀon of the TSS device, either PPxxxx-  
SA or SB/SC is based upon the value of the ꢀp and ring resistors. For the Naꢀonal Electric Code (NEC) arꢀcle 800, it is recommended that at least one fuse be used in  
the ꢀp or ring line for metallic surges. Fuses may be replaced with a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device.  
RTip  
Fuse  
TIP  
To Protected  
Equipment  
RING  
RRing  
FIGURE 2 - UL 1459 & FCC PART 68 LONGITUDINAL PROTECTION  
There are two TSS devices, one located from ꢀp-to-ground and one ring-to-ground. For standard analog signals, the PP3100SA is recommended with a typical resistor  
value for ꢀp and ring of 15 Ohms. The PP3100SB/SC is recommended for resistor values of 7.5 Ohms each. The Naꢀonal Electric Code (NEC) arꢀcle 800 requires two  
fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device may be used. The  
purpose of this circuit is to limit AC power current from geꢃng on the ground line causing any safety hazard.  
RTip  
TIP  
To Protected  
Equipment  
RING  
RRing  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 6  
PP-SM Series  
Only One Name Means ProTek’Tion™  
APPLICATION INFORMATION  
FIGURE 3 - UL 1459 & FCC PART 68 METALLIC & LONGITUDINAL PROTECTION  
Three equal TSS devices are used in this applicaꢀon for metallic (ꢀp-to-ring) and longitudinal (ꢀp-to-ground and ring-to-ground) protecꢀon. For analog signals, the  
PP3100SB/SC is recommended. With a resistance value of 15 Ohms for the ꢀp and ring resistors, the PP3100SA may be used. The Naꢀonal Electric Code (NEC) arꢀcle  
800 requires two fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device  
may be used. This circuit is recommended for protecꢀon against the Bellcore requirement: First Level Lightning Surge Tests (Telecommunicaꢀons Port), document #  
GR-1089-CORE.  
RTip  
TIP  
To Protected  
Equipment  
RING  
RRing  
CIRCUIT BOARD RECOMMENDATIONS  
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:  
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current  
immediately before it can be coupled into the nearby traces.  
• The path length between the TVS device and the protected line should be minimized.  
• All conducꢀve loops including power and ground loops should be minimized.  
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.  
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 7  
PP-SM Series  
Only One Name Means ProTek’Tion™  
DO-214AA PACKAGE INFORMATION  
OUTLINE DIMENSIONS  
MILLIMETERS  
INCHES  
DIM  
MIN  
MAX  
2.21  
4.57  
3.94  
2.50  
1.52  
0.20  
5.59  
031  
MIN  
0.077  
0.160  
0.130  
0.079  
0.030  
0.004  
0.200  
0.006  
MAX  
0.087  
0.180  
0.155  
0.098  
0.060  
0.008  
0.220  
0.012  
A
C
A
1.96  
4.06  
3.30  
2.00  
0.76  
0.10  
5.08  
0.15  
B
C
B
D
E
H
E
F
G
D
H
NOTES  
1. Dimensions are exclusive of mold flash and metal burrs.  
F
G
A
PAD LAYOUT DIMENSIONS  
MILLIMETERS  
MIN MAX  
INCHES  
DIM  
MIN  
0.084  
0.057  
-
MAX  
B
C
D
A
B
C
D
2.15  
1.45  
-
-
-
-
2.55  
-
-
0.100  
-
1.45  
0.057  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 8  
PP-SM Series  
Only One Name Means ProTek’Tion™  
TAPE AND REEL  
10 Pitches Cumulaꢀve  
Tolerance on tape ± 0.2  
P0  
D
t
E
F
W
K0  
B0  
A0  
P
User Direcꢀon of Feed  
SPECIFICATIONS  
TAPE  
WIDTH  
REEL DIA.  
A0  
B0  
K0  
D
E
F
W
P0  
P
tmax  
330mm (13”)  
12mm  
3.79 ± 0.15 5.72 ± 0.15 2.46 ± 0.30 1.55 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.00 ± 0.30 4.00 ± 0.10 8.00 ± 0.10 0.25 ± 0.10  
NOTES  
1. Dimensions are in millimeters.  
2. Surface mount product is taped and reeled in accordance with EIA-481.  
3. Suffix - T = 13” Reel - 3,000 pieces per 12mm tape.  
4. Marking on Part - marking code (see page 2) and logo.  
ORDERING INFORMATION  
BASE PART NUMBER  
LEADFREE SUFFIX  
TAPE SUFFIX  
QTY/REEL  
REEL SIZE  
TUBE QTY  
PPxxxxSA/SB/SC  
-LF  
-T  
3,000  
13”  
n/a  
This device is only available in a Lead-Free configuraꢀon.  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 9  
PP-SM Series  
Only One Name Means ProTek’Tion™  
COMPANY INFORMATION  
COMPANY PROFILE  
In business more than 25 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage pro-  
tecꢀon and overcurrent protecꢀon components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering  
diode TVS array and electronics SMD chip fuses. These components deliver circuit protecꢀon in electronic systems from numerous overvoltage and  
overcurrent events. They include lightning; electrostaꢀc discharge (ESD); nuclear electromagneꢀc pulses (NEMP); inducꢀve switching; and elec-  
tromagneꢀc interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers LED wafer die for ESD protecꢀon and related high  
frequency products. ProTek Devices is ISO 9001:2015 cerꢀꢁed.  
CONTACT US  
Corporate Headquarters  
2929 South Fair Lane  
Tempe, Arizona 85282  
USA  
By Telephone  
General: 602-431-8101  
Sales: & Markeꢀng: 602-414-5109  
Customer Service: 602-414-5114  
Product Technical Support: 602-414-5107  
By Fax  
General: 602-431-2288  
By Eꢁmail:  
Asia Sales: asiasales@protekdevices.com  
Europe Sales: europesales@protekdevices.com  
U.S. Sales: ussales@protekdevices.com  
Distributor Sales: distysales@protekdevices.com  
Customer Service: service@protekdevices.com  
Technical Support: support@protekdevices.com  
ProTek Devices (Asia Pacificꢃ Pte. Ltd.  
8 Ubi Road 2, #06-19  
Zervex  
Singapore - 408538  
Tel: +65-67488312  
Fax: +65-67488313  
Web  
www.protekdevices.com  
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.  
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.  
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering  
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of  
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,  
consequenꢀal or incidental damages.  
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.  
ISO 9001: 2015 CERTIFIED  
05081.R20 7/19  
Page 10  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明