CX1206MKX5R0BB5 [PULSE]

Surface-mount ceramic EMI filter capacitors;
CX1206MKX5R0BB5
型号: CX1206MKX5R0BB5
厂家: PULSE A TECHNITROL COMPANY    PULSE A TECHNITROL COMPANY
描述:

Surface-mount ceramic EMI filter capacitors

文件: 总14页 (文件大小:1328K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
DESCRIPTION  
X2Y® series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD  
(integrated passive device).  
X2Y® products comprise two Y-capacitors and one X-capacitor, integrated into a 4 terminal device, which is available  
in standard MLCC sizes. Thanks to the unique multilayer construction the device provides noise cancellation within  
the device, reducing ESL from nanohenry to picohenry levels.  
Using the unique balance between the Y-capacitors and the shielded multilayer structure the X2Y® products offer  
superior decoupling and filtering.  
The X2Y® device performs as a broadband filter enabling better EMC compliance for electrical equipment in a wide  
range of applications.  
FEATURES  
BENEFITS  
Fewer Component in Filtering: One X2Y® can  
replace multiple inductors and/or capacitors  
Broadband Filtering and Decoupling: X2Y® is  
effective up to 10 GHz and frequencies beyond  
Ultra Low ESL: Noise cancellation within X2Y®  
makes ESL reducing from nanohenry to  
picohenry levels  
Superior Performance in Filtering: One X2Y®  
can eliminate both differential and common mode  
noises  
Bypass: Unlike feedthrough capacitors, X2Y® is  
in bypass, so no DC current limitations  
Fewer Component in Decoupling: Up to 1:7  
replacement of MLCC in power delivering system  
bypass networks  
Matched Y-caps: Two tightly matched line to  
ground capacitors in one device  
Superior Performance in Decoupling: Large or  
small, X2Y® components exhibit ultra low ESL  
Superior Balance: Temperature and voltage  
variations balanced of two Y-caps  
Total Cost Savings: Assembly cost savings  
through reduced component count and placement  
costs  
Aging Reliability: Aging effects are equal on  
two Y-caps  
Board Level Design Advantages: Dramatically  
reduces via drills, which blocks routing  
APPLICATIONS  
EMI filtering on DC motors  
SCM049_V  
Power  
Signal 1  
Filtered connectors (airbag connectors,  
RJ-45 connectors)  
High speed data-line filtering  
Decoupling of supply-lines in high speed  
digital circuits  
Broadband filtering.  
GND  
Amplifier decoupling and EMI  
suppression.  
GND  
Signal 2  
IC Decoupling, on-package, on-PCB.  
DC power line filtering.  
Data line filtering.  
EMI filtering application  
Decoupling / Bypass  
application  
Fig.1 Circuit of typical applications  
EMI suppression for DC motors.  
Sensors  
Audio  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
1 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
QUICK REFERENCE DATA  
DESCRIPTION  
VALUE  
Materials  
X7R / X5R  
Rated voltage  
X7R  
10V, 16V, 25V, 50V, 63V, 100V (IEC)  
10V  
X5R  
Capacitance range (Y-capacitor)  
X7R 0603 series  
1 nF to 330 nF  
1 nF to 180 nF  
10 nF to 470 nF  
100 nF to 1 μF  
180 nF to 470 nF  
X7R 0805 series  
X7R 1206 series  
X7R 1210 series  
X5R 0603 series  
Tolerance on capacitance  
20% (M)  
Test voltage (DC) for 1 minute  
Sectional specifications  
2.5  
U
R
×
IEC 60384-10, second edition 1989-04  
based on IEC 60384-10-1  
X7R: 55 / 125 / 56  
Detailed specification  
Climatic category (IEC 60068)  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
2 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
GENERAL SELECTION CHART  
C
X7R  
X5R  
(pF)  
1,000  
0603  
0805  
1206  
1210  
0603  
1,500  
2,200  
100V  
100 V  
4,700  
5,600  
10,000  
15,000  
18,000  
22,000  
39,000  
47,000  
56,000  
100,000  
180,000  
220,000  
270,000  
330,000  
390,000  
470,000  
560,000  
820,000  
1,000,000  
50 V  
25 V  
100 V  
50 V  
50 V  
25 V  
16 V  
10 V  
16 V  
10 V  
16 V  
10 V  
50V  
10 V  
16 V  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
3 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
MECHANICAL DATA  
SCM051  
Component  
Simplified type  
For dimensions see Table1.  
Fig.2 Component outline & simplified outline  
Table1 Capacitor dimensions  
T
A
CASE SIZE  
L
W
C
MIN.  
MAX.  
MIN.  
MAX.  
Dimensions in millimetres  
0603  
0805  
1206  
1210  
1.6 0.15  
2.0 0.15  
3.2 0.20  
3.2 0.20  
0.85 0.15  
1.25 0.15  
1.65 0.20  
2.5 0.20  
0.55  
0.75  
1.10  
1.10  
0.75  
0.95  
1.40  
1.70  
0.25  
0.25  
0.25  
0.25  
0.55  
0.55  
0.65  
0.65  
0.40 0.20  
0.70 0.20  
1.20 0.30  
1.20 0.30  
Dimensions in inches  
0603  
0805  
1206  
1210  
0.063 0.006 0.033 0.006  
0.079 0.006 0.049 0.006  
0.126 0.008 0.065 0.008  
0.126 0.008 0.098 0.008  
0.022  
0.030  
0.043  
0.043  
0.030  
0.037  
0.055  
0.067  
0.010  
0.010  
0.010  
0.010  
0.022  
0.022  
0.026  
0.026  
0.016 0.008  
0.028 0.008  
0.047 0.012  
0.047 0.012  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
4 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
ELECTRICAL CHARACTERISTICS FOR X7R  
Class 2 capacitors; X7R dielectric; Ni/Sn terminations  
DESCRIPTION  
VALUE  
Rated voltage UR (DC)  
Capacitance range  
Capacitance tolerance  
Dissipation factor (D.F.); note 1  
6.3 V  
10 V, 16 V, 25 V, 50 V/63 V ,100 V  
1 nF to 1 uF  
±20%  
6%  
5%  
10 V  
16 V  
3.5%  
2.5%  
25 V  
Insulation resistance after 1 minute at UR (DC)  
Rins × C > 500 seconds or Rins > 10GΩ, whichever is less  
Maximum capacitance change as a function of  
temperature  
±15%  
Operating temperature range:  
X7R  
55 °C to +125 °C  
Aging  
Typical 1% per time decade  
Note: Measured at 20 C, 1 V and 1 KHz, using a four-gauge method.  
CHARACTERISTICS FOR X5R  
Class 2 capacitors; X5R dielectric; Ni/Sn terminations  
DESCRIPTION  
VALUE  
Rated voltage UR (DC)  
6.3V,10 V  
Capacitance range  
Capacitance tolerance  
Dissipation factor (D.F.); note 1  
6.3 V  
180 nF to 470 nF  
±20%  
10%  
10%  
10 V  
Insulation resistance after 1 minute at UR (DC)  
Rins × C > 500 seconds or Rins s > 10GΩ, whichever is less  
Maximum capacitance change as a function of  
temperature  
±15%  
Operating temperature range:  
X5R  
55 °C to +85 °C  
Aging  
Typical 1% per time decade  
Note: Measured at 20 C, 1 V and 1 KHz, using a four-gauge method.  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
5 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
SELECTION CHART FOR X7R SIZES 0603, 0805, AND ORDERING INFORMATION  
Y-CAPACITOR  
VOLTAGE  
THICKNESS  
QUANTITY  
PER REEL  
SIZE  
RATING  
(V)  
CTC ORDERING CODE  
CAP.  
(nF)  
TOLERANCE  
( %)  
(mm)  
1
1
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
100  
50  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
CX0603MRX7R0BB102  
CX0603MRX7R9BB102  
CX0603MRX7R7BB102  
CX0603MRX7R0BB152  
CX0603MRX7R9BB152  
CX0603MRX7R0BB222  
CX0603MRX7R0BB472  
CX0603MRX7R0BB562  
CX0603MRX7R9BB562  
CX0603MRX7R9BB103  
CX0603MRX7R8BB153  
CX0603MRX7R8BB183  
CX0603MRX7R8BB223  
CX0603MRX7R7BB393  
CX0603MRX7R7BB473  
CX0603MRX7R7BB563  
CX0603MRX7R6BB104  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
1
16  
1.5  
1.5  
2.2  
4.7  
5.6  
5.6  
10  
15  
18  
22  
39  
47  
56  
100  
100  
50  
100  
100  
100  
50 / 63  
50 / 63  
25  
0603  
25  
25  
16  
16  
16  
10  
180  
220  
270  
330  
1
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
10  
10  
0.65  
0.65  
0.65  
0.65  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
0.85  
CX0603MRX7R6BB184  
CX0603MRX7R6BB224  
CX0603MRX7R6BB274  
CX0603MRX7R6BB334  
CX0805MRX7R0BB102  
CX0805MRX7R9BB102  
CX0805MRX7R0BB152  
CX0805MRX7R0BB222  
CX0805MRX7R0BB472  
CX0805MRX7R0BB103  
CX0805MRX7R9BB153  
CX0805MRX7R9BB183  
CX0805MRX7R9BB223  
CX0805MRX7R8BB223  
CX0805MRX7R7BB473  
CX0805MRX7R7BB563  
CX0805MRX7R7BB104  
CX0805MRX7R6BB184  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
10  
10  
100  
50  
1
1.5  
2.2  
4.7  
10  
100  
100  
100  
100  
50  
15  
0805  
18  
50  
22  
50  
22  
50  
47  
16  
56  
16  
100  
180  
16  
10  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
6 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
SELECTION CHART FOR X7R SIZES 1206,1210 AND ORDERING INFORMATION  
Y-CAPACITOR  
QUANTI  
TY  
PER  
VOLTAGE  
RATING  
(V)  
THICKNESS  
SIZE  
CTC ORDERING CODE  
CAP.  
(nF)  
TOLERANCE  
( %)  
(mm)  
REEL  
10  
15  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
100  
100  
50  
100  
100  
100  
50  
50  
50  
50  
16  
16  
16  
16  
16  
10  
50  
50  
50  
50  
50  
50  
50  
25  
50  
25  
16  
16  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
CX1206MKX7R0BB103  
CX1206MKX7R0BB153  
CX1206MKX7R9BB153  
CX1206MKX7R0BB183  
CX1206MKX7R0BB223  
CX1206MKX7R0BB333  
CX1206MKX7R9BB393  
CX1206MKX7R9BB473  
CX1206MKX7R9BB563  
CX1206MKX7R9BB104  
CX1206MKX7R7BB184  
CX1206MKX7R7BB224  
CX1206MKX7R7BB274  
CX1206MKX7R7BB334  
CX1206MKX7R7BB394  
CX1206MKX7R6BB474  
CX1210MKX7R9BB104  
CX1210MKX7R9BB184  
CX1210MKX7R9BB224  
CX1210MKX7R9BB274  
CX1210MKX7R9BB334  
CX1210MKX7R9BB394  
CX1210MKX7R9BB474  
CX1210MKX7R8BB474  
CX1210MKX7R9BB564  
CX1210MKX7R8BB564  
CX1210MKX7R7BB824  
CX1210MKX7R7BB105  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
3,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
2,000  
15  
18  
22  
33  
39  
47  
1206  
56  
100  
180  
220  
270  
330  
390  
470  
100  
180  
220  
270  
330  
390  
470  
470  
560  
560  
820  
1000  
1210  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
7 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
SELECTION CHART FOR X5R SIZES 0603 (1) AND ORDERING INFORMATION  
Y-CAPACITOR  
VOLTAGE  
RATING  
(V)  
THICKNESS  
(mm)  
QUANTITY  
PER REEL  
SIZE  
CTC ORDERING CODE  
CAP.  
TOLERANCE  
( %)  
(nF)  
180  
20%  
20%  
20%  
20%  
20%  
20%  
20%  
10  
10  
10  
10  
10  
10  
10  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
0.65  
CX0603MRX5R6BB184  
CX0603MRX5R6BB224  
CX0603MRX5R6BB274  
CX0603MRX5R6BB334  
CX0603MRX5R6BB394  
CX0603MRX5R6BB474  
CX0603MRX5R5BB474  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
4,000  
220  
270  
330  
390  
470  
470  
0603  
Note: 1. Other values are available on request.  
THICKNESS CLASSIFICATION AND PACKING QUANTITIES FOR X7R  
QUANTITY PER REEL  
8 mm TAPE WIDTH  
THICKNESS  
CLASSIFICATION  
(mm)  
180 mm; 7"  
330 mm; 13"  
0603 - 1210  
PAPER  
BLISTER  
PAPER  
BLISTER  
0.65 ± 0.1  
0.85 ± 0.1  
1.2 ± 0.15  
1.6 ± 0.15  
4,000  
4,000  
3,000  
2,000  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
8 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
ORDERING INFORMATION  
Components may be ordered by using either a Pulse part number or Phycomp’s unique 12NC.  
Ordering code: Pulse part number  
Example: CX0805MRX7R8BB223  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
9 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
RECOMMENDED DIMENSIONS OF SOLDER LANDS  
For dimensions see Table2.  
Fig.3 Recommended dimensions of solder lands  
Table 2  
Reflow soldering  
Footprint dimensions  
Placement  
Accuracy  
(mm)  
CASE SIZE  
(EIA)  
(mm)  
C
A
B
D
E
0603  
0805  
1206  
1210  
2.30  
0.76  
0.64  
0.51  
1.52  
0.20  
3.05  
4.06  
4.57  
1.27  
1.65  
2.55  
0.89  
1.00  
1.00  
0.56  
1.02  
1.14  
2.03  
3.05  
4.06  
0.20  
0.25  
0.25  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
10 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
MEASUREMENT SETUP  
Via  
Ground  
Fig.4 X2Y® series through measurement  
50 W microstrip line with  
CPW design method  
X2Y® are soldered on a printed circuit board  
PCB: FR-4 substrate, with 50 W microstrip line  
Network Analyzer: Agilent E5071b  
Size 0603: A=0.5 mm, B=1.2 mm  
For other dimensions see Table 3.  
Fig.5 Testing board for measurement  
Calibration: full 2-port calibration with 85033E kit  
Table 3 Recommended dimensions of measurement  
CASE SIZE  
0603  
A (mm)  
B (mm)  
0.5 0.10  
0.8 0.10  
1.2 0.10  
2.1 0.15  
1.2 0.10  
1.6 0.10  
2.8 0.15  
2.8 0.15  
0805  
1206  
1210  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
11 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
TESTS AND REQUIREMENTS  
Table 4 Test procedures and requirements  
IEC 60068-2  
IEC 60384-10/  
CECC 32 100  
CLAUSE  
TEST  
PROCEDURE  
REQUIREMENTS  
TEST  
METHOD  
the capacitors may be mounted  
on printed-circuit boards or  
ceramic substrates by applying  
reflow soldering (including vapor  
phase soldering) or conductive  
adhesive  
4.4  
4.5  
mounting  
no visible damage  
visual  
inspection  
and  
dimension  
check  
any applicable method using ×10  
magnification  
in accordance with specification  
Class 1: ≤1000 pF; f = 1 MHz  
>1000 pF; f = 1 kHz NP0:  
measuring voltage 1 V at 20 °C  
Class 2: For all capacitors f = 1  
kHz X7R: measuring voltage 1 V  
at 20 °C Y5V: measuring voltage  
1 V at 25 °C  
4.6.1  
4.6.2  
capacitance  
within specified tolerance  
Class 1: ≤1000 pF; f = 1 MHz  
>1000 pF; f = 1 kHz NP0:  
measuring voltage 1 V at 20 °C  
Class 2: For all capacitors f = 1  
kHz X7R: measuring voltage 1 V  
at 20 °C Y5V: measuring voltage  
1 V at 25 °C  
tan δ  
in accordance with specifications  
insulation  
resistance  
4.6.3  
4.6.4  
at UR (DC) for 1 minute  
in accordance with specification  
no breakdown or flashover  
voltage proof  
2.5 × UR for 1 minute  
temperature  
characteristic temperature  
Between minimum and maximum  
4.7.1  
in accordance with specification  
a force of 5 N applied for 10 s to  
the line joining the terminations  
and in a plane parallel to the  
substrate  
4.8  
adhesion  
no visible damage  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
12 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
Table4 Test procedures and requirements (continued)  
IEC 60068-2  
IEC 60384-10/  
CECC 32 100  
CLAUSE  
TEST  
PROCEDURE  
REQUIREMENTS  
TEST  
METHOD  
mounted in accordance with  
CECC 32 100, paragraph 4.4  
conditions: bending 1 mm at a  
rate of 1 mm/s, radius jig 340  
mm  
4.9  
no visible damage  
bond strength  
of plating on  
end face  
∆C/C: class 1: within ±10% class  
2, X7R: within ±10% class 2,  
Y5V: within ±30%  
the terminations shall be well  
tinned after recovery ∆C/C: class  
1: within ±0.5% or 0.5 pF  
whichever is greater class 2,  
X7R: >−5% and ≤10% class 2,  
Y5V: >−10% and ≤20%  
Precondition: 120 to 150 °C for 1  
minute; 260 ±5 °C for 10 ±0.5 s  
in a static solder bath  
resistance to  
soldering heat  
4.10  
Tb  
using visual enlargement of ×10,  
dissolution of the terminations  
shall not exceed 10%  
resistance to  
leaching  
260 ±5 °C for 30 ±1 s in a static  
solder bath  
zero hour test, and test after  
storage (20 to 24 months) in  
original packing in normal  
atmosphere; unmounted chips  
completely immersed for 2 ±0.5  
s in a solder bath at 235 ±5 °C  
the terminations shall be well  
tinned  
4.11  
4.12  
Ta  
Na  
solderability  
Preconditioning, class 2 only;  
NP0 / X7R: −55 to +125 °C; 5  
of temperature cycles Y5V: −25 to +85 °C; 5  
no visual damage after 48 hours  
recovery; ∆C/C: class 1: within  
±1% or 1 pF class 2, X7R: within  
±15% class 2, Y5V: within ±20%  
no visual damage after 24 hours  
recovery: ∆C/C: class 1: within  
±2% or 1 pF, whichever is  
rapid change  
cycles  
greater class 2, X7R: within  
±20% class 2, Y5V: within  
Pre-conditioning, class 2 only:  
1000 hours at upper category  
temperature at: 1.5 × UR  
+30/−40% tan δ: class 1: ≤2 ×  
specified value class 2: X7R:  
≤7% class 2: Y5V: ≤15% Rins:  
class 1: 4000 MΩ or Rins × CR ≥  
40 s, whichever is less class 2:  
2000 MΩ or Rins × CR ≥ 50 s,  
whichever is less  
4.15  
Endurance  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
13 of 14  
Version 01  
Feb-21  
Surface-mount ceramic  
EMI filter capacitors  
X2Y® Series  
REVISION HISTORY  
Revision  
Date  
Description  
Version 01  
Jan. 21, 2021  
- New issue  
In the effort to improve our products, we reserve the right to make changes judged to be necessary.  
CONFIDENTIAL AND PROPRIETARY INFORMATION  
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.  
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or  
use without specific written authorization of Pulse is strictly forbidden.  
14 of 14  
Version 01  
Feb-21  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY