PA5187.151HLT [PULSE]

SMT Power Inductors;


型号：	PA5187.151HLT
厂家：	PULSE A TECHNITROL COMPANY
描述：	SMT Power Inductors
文件：	总3页 (文件大小：623K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT Power Inductors

Power Beads - PA5187.XXXHLT Series

POWER PRODUCTS

Current Rating: Up to 100Apk

Inductance Range: 100nH to 180nH

Height: 8.2mm Max

Footprint: 10.8mm x 8.2mm Max

Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C ⁷

Saturation Current⁵

(A TYP)

Inductance¹

@ 0ADC

Inductance²

@Irated

Irated³

DCR⁴

Heating Current⁶

(A TYP)

Part

Number

(ADC)

(mΩ Max)

(nH +/- 10%)

(nH TYP)

25°C

100

100°C

PA5187.101HLT

PA5187.121HLT

PA5187.151HLT

PA5187.181HLT

100

120

150

180

100

120

112

0.12

144

NOTES:

1. Inductance measured at 100kHz, 100mVrms.

7. In high volt*time applications, additional heating in the component can occur due

to core losses in the inductor which may neccessitate derating the current in order

to limit the temperature rise of the component. To determine the approximate total

losses (or temperature rise) for a given application, the coreloss and temperature rise

curves can be used.

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.

3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-

ing current depending on which value is lower.

4. The nominal DCR is measured at point

drawing.

, as shown below on the mechanical

8. Parts with the HLT suﬃx are sold in tape and reel packaging. Pulse complies to

industry standard tape and reel speciﬁcation EIA-481.

5. The saturation current is the typical current which causes the inductance to drop by

20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by

placing the component in the speciﬁed ambient environment and applying a short

duration pulse current (to eliminate self-heating eﬀects) to the component.

The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth

(Ko=8.7mm). Samples of these parts can be ordered by removing the HLT suﬃx and

replacing with HL.

9. The temperature of the component (ambient plus temperature rise) must be within

the stated operating temperature range.

6. The heating current is the DC current which causes the part temperature to increase by

^{approximately 40°C when used in a typical applicati}M^one^.chanical

PA5187.XXXHLT

Schematic

Weight:

....... 3.28grms

....... 400/ Reel

Tape & Reel:

Dimensions:

Unless otherwise speciﬁed ,

all tolerances are 0.25

Power.PulseElectronics.com

P891. A (07/20)

SMT Power Inductors

Power Beads - PA5187.XXXHLT Series

POWER PRODUCTS

Power.PulseElectronics.com

P891. A (07/20)

SMT Power Inductors

Power Beads - PA5187.XXXHLT Series

PA5187.XXXHLT CoreLoss (W)

PA5187.XXXHLT Temp Rise vs Power Dissipation

Power.PulseElectronics.com

P891. A (07/20)

POWER PRODUCTS

相关型号：