PG2110.101HLT [PULSE]

SMT Power Inductors;


型号：	PG2110.101HLT
厂家：	PULSE A TECHNITROL COMPANY
描述：	SMT Power Inductors
文件：	总4页 (文件大小：1243K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT Power Inductors

Power Beads - PG2110.XXXHLT Series

Current Rating: Over 75Apk

Inductance Range: 100nH to 180nH

Height: 8mm Max

Footprint: 8mm x 5mm Max

Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C ⁷

Saturation Current⁵

(A TYP)

Inductance¹

@ 0ADC

Inductance²

@Irated

Irated³

DCR⁴

Heating Current⁶

(A TYP)

Part

Number

(ADC)

(mΩ ± 10%)

(nH +/- 15%)

(nH TYP)

25°C

100°C

PG2110.101HLT

PG2110.121HLT

PG2110.151HLT

PG2110.181HLT

100

120

150

180

0.22

105

126

NOTES:

1. Inductance measured at 100kHz, 100mVrms.

7. In high volt*time applications, additional heating in the component can occur due

to core losses in the inductor which may neccessitate derating the current in order

to limit the temperature rise of the component. To determine the approximate total

losses (or temperature rise) for a given application, the coreloss and temperature rise

curves can be used.

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.

3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-

ing current depending on which value is lower.

4. The nominal DCR is measured at point

drawing.

, as shown below on the mechanical

8. Parts with the HLT suﬃx are sold in tape and reel packaging. Pulse complies to

industry standard tape and reel speciﬁcation EIA-481.

5. The saturation current is the typical current which causes the inductance to drop by

20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by

placing the component in the speciﬁed ambient environment and applying a short

duration pulse current (to eliminate self-heating eﬀects) to the component.

6. The heating current is the DC current which causes the part temperature to increase by

approximately 40°C when used in a typical application.

The tape and reel for this product has a width (W=24mm), pitch (Po=12mm) and depth

(Ko=8.1mm). Samples of these parts can be ordered by removing the HLT suﬃx and

replacing with HL.

9. The temperature of the component (ambient plus temperature rise) must be within

the stated operating temperature range.

Schematic

Mechanical

PG2110.XXXHLT

8.5

2.5

SUGGESTED LAND PAT TERN

8.0 MAX

PG2110.XXXHL

5.0 MAX

DATE CODE Co.O

Weight:

2.74grms

Tape & Reel: 500/Reel

Dimensions: mm

8.0 MAX

Unless otherwise speciﬁed,

all tolerances are 0.25

0.10

2 SURFACES

2.0 REF

3.4 REF

PulseElectronics.com

P908.A (04/21)

SMT Power Inductors

Power Beads - PG2110.XXXHLT Series

TAPE & REEL INFO

SURFACE MOUNTING TYPE, REEL/TAPE LIST

TAPE SIZE

(mm)

W 0.30 A0 0.1 B0 0.1 K0 0.1 PCS/REEL

24.0 5.1 8.1 8.1 500

REEL SIZE (mm)

QTY

TYPE

PG2110.XXXHLT

PulseElectronics.com

P908.A (04/21)

SMT Power Inductors

Power Beads - PG2110.XXXHLT Series

PG2110.XXXHLT, L vs I, Curve 25C

PG2110.XXXHLT, L vs I, Curve 100C

PulseElectronics.com

P908.A (04/21)

SMT Power Inductors

Power Beads - PG2110.XXXHLT Series

PG2110.XXHLT CoreLoss (W)

PG2110.XXXHLT Temp Rise vs Power Dissipation

For More Information:

Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com

Performance warranty of products oﬀered on this data sheet is limited to the parameters speciﬁed. Data is subject to change without notice. Other brand and product names mentioned herein may be

PulseElectronics.com

P908.A (04/21)

相关型号：