QM75041 [QORVO]
5G PAMiD Module;型号: | QM75041 |
厂家: | Qorvo |
描述: | 5G PAMiD Module |
文件: | 总25页 (文件大小:1166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ADVANCED
QM75041
5G PAMiD Module
Product Description
The Qorvo® QM75041 is a highly integrated Sub-6GHz
PAMiD compliant to 5G-NR standards focused on Best-in-
class 5G performance and ease-of-use (EOU) for platforms
targeting advanced RF, including flagship/premium
smartphones and data devices.
The module consists of a High Band PA, Filter, Directional
Coupler and TxRx Switch for TDD operation.
The QM75041 supports Average Power Tracking (APT) PC2
power targets as well as Envelope Tracking (ET) up to 5.2
Vdc.
The QM75041 is packaged in a RoHS-compliant,30 pin,
3mm x 5mm x 0.70mm lead less package.
Functional Block Diagram
30 Pin, 3.0 mm x 5.0 mm x 0.70 mm
Feature Overview
• 5G-NR supporting full n41 (2.496-2.690 GHz) Band
• Integrated filtering
• Integrated Vcc Bypass Cap Switch
• Bi-Directional Coupler
• Advanced Smartphones, Tablets and Cellular Devices
• Datacards
• Machine-to-Machine
• MIPI RFFE 2.1 Applications
Top View
Ordering Information
PART NUMBER
QM75041SB
DESCRIPTION
5pc Bag
QM75041TR7X
Any Size Reel
13” reel, Qty to order (5k
units)
QM75041TR13
QM75041DK01
QM75041EVB01
Design Kit
Evaluation board
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
1 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Absolute Maximum Ratings
Units
Parameter
Symbol, Conditions
Rating
Battery voltage
VBATT
6.0
6.0
V
V
Max Supply Voltage
RFFE Control Interface Bus
Input RF Power
VCC1, VCC2
VIO, SDATA, SCLK
TX input, CW 50 Ohm,T=25 °C
2.0
V
+10.0
dBm
dBm
Input RF Power
ANT port, Rx mode, in band frequencies
25
Storage Temperature
Tstorage
Tcase
-40 to 150
-20 to 85
°C
°C
Operating Case Temperature
All Temps, All Operating Voltage, VSWR<10:1 all
phases
No Damage Pout (5G)
Prated + 2
dBm
Notes: Exceeding any one or combination of the Absolute Maximum Rating conditions may cause damage to the device. Extended application of the Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical operation of the device under Absolute Maximum Rating conditions is not implied.
Recommended Operating Conditions
Parameter
Conditions
Min.
Typ.
Max.
Units
VBATT
3
3.8
4.8
APT VCC1, VCC2
ET VCC1, VCC2
0.5
0.5
3.7
3.7
5.2
5.2
Supply Voltage
V
RFFE Control
Interface Bus
VIO, SDATA,
SCLK
1.65
-
1.8
-
1.95
0.45
V
V
V
VIO Power On
Reset Voltage
VIO_Reset
Logic Low
0
0
0.3*VIO
Logic High
0.7*VIO
VIO
20
V
Leakage at VBatt
uA
Leakage at VCC1/
VCC2
Operating Case
Temperature
20
85
uA
°C
-20
-
-
Input and Output
Impedance
50
-
Ω
Electrical Specifications are measured at specified test conditions. Specifications are not guaranteed over all operating conditions.
QM75041 Data Sheet - Rev F | Subject to change without notice
2 of 25
www.qorvo.com
ADVANCED
QM75041
UHB 5G PAMiD Module
Timing Diagram
The QM75041 recommended control timing for Tx mode operation is shown below. The falling edge of SCLK during Bus Park (BP) is the
master timing reference for all hardware events such as the application of RF input to the Tx input port of the module. Failure to comply
with the specification below may result in RF output distortion or module damage.
For applications where MIPI RFEE VIO is turned ON/OFF in accordance with MIPI RFEE bus activity, please refer to the VIO Timing
specifications.
MIPI RFEE Command Data Frames
BP
BP
SDATA
SCLK
D1
D0
P
P = parity bit
D1
D0
P
Module states change at
the falling edge of SCLK
during Buss Park BP
Module Internal Control Logic
T1
T2
Target
Power
Module State Change T1 min T2 min
Sleep TX
5 µs
0 µs
RF input power at module Tx port
Minimum
Power
Time
Delay application of RF power to Tx input by at least T1 µs after switching to Tx mode (TRX_SW_Control Bus
Park BP).
Do not exit Tx mode until T2 µs after RF power at the Tx input has been removed.
2µs are recommended typically.
QM75041 Data Sheet - Rev F | Subject to change without notice
3 of 25
www.qorvo.com
ADVANCED
QM75041
UHB 5G PAMiD Module
5G NR Test Signal Configurations
All test signals are 3GPP TS38.101 compliant
MPR for all BW and SCS
WF TYPE
Modulation
OUTER
≤ 0.5
≤ 1
INNER
Pi/2-BPSK
QPSK
0
0
DFT-s-OFDM
16QAM
64QAM
256QAM
QPSK
≤ 2
≤ 1
≤ 2.5
≤ 4.5
≤ 3
≤ 3
≤ 1.5
≤ 2
16QAM
64QAM
256QAM
CP-OFDM
≤ 3.5
≤ 6.5
5G NR n41 Tx Characteristics, PC2
Test conditions unless otherwise specified: VCC1 = VCC2 = +5.2ꢀV, VBATT = +3.8ꢀV, Temp. = 25ꢀ°C. Characterized Operating Bandwidth:
APT = 100MHz.
Performance referenced to module pin location.
Product Spec.
Power
Mode
Parameter
Conditions
Units
Min.
Typ.
Max.
Frequency
Output Power
Linear
2496
-
2690
MHz
Pout = +29.5 dBm, DFT-S-OFDM QPSK 100
APT, HPM,
MPR = 0
29.5
29.7
30
-
dBm
dB
Output Power n41 MHz Inner RB
Gain
Pout = +29.5 dBm, DFT-S-OFDM QPSK 100
MHz Inner RB
APT, HPM,
MPR = 0
Gain (G) n41
Linearity
Adjacent Channel
Leakage Power
Ratio (ACLR) n41
EUTRAACLR, Pout = +26.5dBm,
CP-OFDM QPSK,100 MHz FRB
APT, HPM,
MPR = 3
-38
dBc
EVM
EVM, Pout = +23.0dBm, CP-OFDM 256 QAM,
100 MHz FRB
APT, HPM,
MPR = 6.5
EVM n41
Current
Current n41
1.85
2.0
1000
-
%
mA
dBm
dB
Current, Pout = +29.5 dBm, DFT-S-OFDM
QPSK 100 MHz Inner RB
APT, HPM,
MPR = 0
Output Power
Linear
Pout = +3.0 dBm, DFT-S-OFDM QPSK 100
Output Power n41 MHz FRB
APT LPM
APT LPM
3.0
-
Gain
Pout = +3.0 dBm, DFT-S-OFDM QPSK 100
MHz FRB
Gain (G) n41
23
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
4 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Product Spec.
Units
Power
Mode
Parameter
Conditions
Min.
Typ.
Max.
Frequency
2496
-
2690
MHz
Linearity
Adjacent Channel
Leakage Power
Ratio (ACLR) n41
EUTRAACLR, Pout = +3.0 dBm, DFT-S-OFDM
QPSK, 100 MHz FRB
APT LPM
APT LPM
-38
-38
dBc
dBc
Adjacent Channel
Leakage Power
Ratio (ACLR) n41
EUTRAACLR, Pout = +3.0 dBm,
CP-OFDM QPSK,100 MHz FRB
Current
Current n41
Rx Band Noise
Current, Pout = +3.0 dBm
APT LPM
115
mA
Rx BN at n41 Tx output,
600 - 960MHz, (LB)
MPR=1, Pout = +28.5 dBm, QPSK,
MPR=3, Pout = +26.5 dBm, QPSK
-170
-171
-171
-128
-137
dBm/ Hz
dBm/ Hz
dBm/ Hz
dBm/ Hz
dBm/ Hz
APT HPM
APT HPM
Rx BN at n41 Tx output,
1574 -1577MHz, (GPS,
GLONASS)
MPR=1, Pout = +28.5 dBm, QPSK,
MPR=3, Pout = +26.5 dBm, QPSK
Rx BN at n41 Tx output,
1805 - 1880MHz, (MB)
MPR=1, Pout = +28.5 dBm, QPSK,
MPR=3, Pout = +26.5 dBm, QPSK
APT HPM
APT HPM
Rx BN at n41 Tx output,
2475 - 2495MHz
(2.4GHz WiFi)
MPR=1, Pout = +28.5 dBm, QPSK,
MPR=3, Pout = +26.5 dBm, QPSK
Rx BN at n41 Tx output,
3300 - 5000MHz, (UHB)
MPR=1, Pout = +28.5 dBm, QPSK,
MPR=3, Pout = +26.5 dBm, QPSK
APT HPM
APT HPM
HARMONICS
Pout ≤ max power, measured with
100MHz DFTS-OFDM-QPSK 1 RB 1
SRB,136 SRB, 1 RB 2702SRB MPR=0
waveform, Pout=+29.5 dBm
dBm/
MHz
2nd Harmonic n41
-40.0
-40.0
Pout ≤ max power, measured with
100MHz DFTS-OFDM-QPSK 1 RB 1
SRB,136 SRB, 1 RB 2702SRB MPR=0
waveform, Pout=+29.5 dBm
dBm/
MHz
3rd Harmonic n41
APT HPM
Pout ≤ max power, measured with
100MHz DFTS-OFDM-QPSK 1 RB 136
SRB MPR=0 waveform, Pout=+29.5
dBm
dBm/
MHz
4th Harmonic n41
Spurious Levels
APT HPM
All Modes
-40.0
-70.0
All Loadsꢀ≤ 6:1
dBc
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
5 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
5G NR n41 Rx Characteristics
Test conditions unless otherwise specified: VBATT = +3.8ꢀV, Temp. = 25ꢀ°C, PA disabled.
Performance referenced to module pin location.
Product Spec.
Units
Parameter
Conditions
Min.
Typ.
Max.
Frequency
2496
-
2690
MHz
dB
Insertion Loss
I.L. n41
VCC1 = VCC2 = +5.2V
-
2.6
-
Return Loss
I.R.L. n41
VCC1 = VCC2 = +5.2V
VCC1 = VCC2 = +5.2V
-
-
-14
-14
-
-
dB
dB
O.R.L. n41
Rx Rejection
LB Tx,699 – 915 MHz
B3 Tx,1710-1785 MHz
ISM Tx,2400 MHz
Tx,3300-5000 MHz
VCC1 = VCC2 = +5.2V
VCC1 = VCC2 = +5.2V
VCC1 = VCC2 = +5.2V
VCC1 = VCC2 = +5.2V
-
-
-
-
43
43
47
43
-
-
-
-
dB
dB
dB
dB
ISM 5G Tx,5000-5925
MHz
VCC1 = VCC2 = +5.2V
-
36
-
dB
5G NR n41 Coupler Characteristics
Test conditions unless otherwise specified: VBATT = +3.8ꢀV, Temp. = 25ꢀ°C, PA disabled.
Performance referenced to module pin location.
Product Spec.
Parameter
Conditions
Units
Min.
Typ.
Max.
Frequency
2496
-
2690
MHz
Coupling Factor
Coupling Factor
-
20
-
-
dB
dB
Coupler Variation over Output VSWR
Coupler Variation
2.5:1 at Ant Port
-0.5
0.5
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
6 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Recommended Register Settings for PA Section (RFFE1)
MIPI RFEE Description
The RFFE interface implemented in theQM75041 is in compliance with the MIPI Alliance Specification for RF Front-End Control
Interface Version 2.1 - April 2018
TX FFE Registers (RFFE1)
Mask
Write
Support
Yes
Register
address
Default
[msb:lsb]
Read/ Trigger
Write support
Data Bits
Reg00[7:4]
Reg00[3]
Register Name
PA_CTRL0
Qorvo Bit Field Name
Reserved
Qorvo Description
0x00
0x00
4b0000
1b0
Reserved
PA Enable
0: PA OFF
1: PA ON
R/W
R/W
T0
T0
PA_CTRL0
PA_EN
Yes
VCC Capacitor control
0: iso mode (VCC cap switched out)
1: bypass mode (VCC cap switched in)
0x00
0x00
Reg00[2]
PA_CTRL0
PA_CTRL0
VCC_CAP_BYP
PA_MODE[1:0]
1b0
R/W
R/W
T0
T0
Yes
OR'ed with Reg05[0] VCC_CAP_SW
PA Mode
00: ET HPM
Reg00[1:0]
2b00
01: APT HPM
Yes
10: APT LPM
11: Reserved (same as APT LPM)
0x01
0x02
0x03
Reg01[7:0]
Reg02[7:0]
Reg03[7:4]
PA_CTRL2
PA_CTRL1
TR_CTRL
PA_BIAS2[7:0]
PA_BIAS1[7:0]
Reserved
8b00000000 PA Bias - power stage
8b00000000 PA Bias - driver stage
R/W
R/W
R/W
T0
T0
T1
No
No
Yes
4b0000
Reserved
Transmit/Receive Switch Control.
0000: OFF
0001: reserved (same as 0000)
0010: TX (load switch open)
0011: PC3 TX (load switch closed)
0100: reserved (same as 0000)
0101: reserved (same as 0000)
0110: reserved (same as 0000)
0111: reserved (same as 0000)
1000: reserved (same as 0000)
1001: RX
0x03
Reg03[3:0]
TR_CTRL
ANT_SW[3:0]
4b0000
R/W
T1
Yes
1010: reserved (same as 0000)
1011: reserved (same as 0000)
1100: reserved (same as 0000)
1101: reserved (same as 0000)
1110: reserved (same as 0000)
1111: reserved (same as 0000)
Reserved
Coupler Output
00: High Isolation
01: Forward Port
10: Reverse Port
11: Coupler In
Reserved
VCC Capacitor control
0: iso mode (VCC cap switched out)
1: bypass mode (VCC cap switched in)
0x04
0x04
0x05
0x05
Reg04[7:2]
Reg04[1:0]
Reg05[7:1]
Reg05[0]
CPL_CTRL
CPL_CTRL
PA_CTRL2
PA_CTRL2
Reserved
CPL_OUT[1:0]
Reserved
6b000000
2b00
R/W
R/W
R/W
R/W
T2
T2
T0
T0
Yes
Yes
Yes
Yes
7b0000000
1b0
VCC_CAP_SW
OR'ed with Reg00[2] VCC_CAP_BYP
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
7 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
TX FFE Registers (RFFE1)
Mask
Write
Support
Register
address
Default
[msb:lsb]
Read/ Trigger
Write support
Data Bits
Register Name
Qorvo Bit Field Name
Qorvo Description
0: Normal operation (ACTIVE)
1: Secondary mode (LOW POWER)
0: Normal operation
0x1C
Reg28[7]
PM_TRIG
PWR_MODE
1b1
1b0
R/W
R/W
No
No
No
No
1: initialization state
0x1C
0x1C
Reg28[6]
PM_TRIG
PM_TRIG
PWR_STATE
note - this bit always reads 0. Writing a 1 to this bit
forces a reset.
Setting these bits to '1' will cause the corresponding
triggers to be masked (disabled), and RFFE writes to
corresponding registers will change configuration
immediately (no trigger command necessary).
TriggerMask[2] = TriggerMask_2, TriggerMask[1] =
TriggerMask_1, & TriggerMask[0] = TriggerMask_0
Reg28[5:3]
TriggerMask[2:0]
3b000
R/W
No
No
Setting these bits to '1' will cause the registers associated
with that trigger to be loaded with the contents of its
corresponding shadow register. Trigger[2] = Trigger_2,
Trigger[1] = Trigger_1, and Trigger[0] = Trigger_0
0x1C
0x1D
Reg28[2:0]
Reg29[7:0]
PM_TRIG
Trigger[2:0]
3b000
R/W
RM
No
No
No
No
This is a read-only register. However, during the
programming of the USID a write command sequence is
performed on this register, even though the write does
not change its value.
PRODUCT_ID
PRODUCT_ID[7:0]
8b00101100
This is a read-only register. However, during the
programming of the USID, a write command sequence is
performed on this register, even though the write does
MANUFACTURER_ID_LSB
[7:0]
0x1E
0x1F
Reg30[7:0]
Reg31[7:4]
MAN_ID
8b11000110 not change its value. Note: This is the lower 8 least
significant bits of the RFFE's MANUFACTURER_ID (i.e.
MANUFACTURER_ID[7:0] =
RM
RM
No
No
No
No
MANUFACTURER_ID_LSB[7:0]
These bits are read-only. However, during the
programming of the USID, a write command sequence is
performed on this register even though the write does not
change its value. Note: This is the 4 most significant bits
of the RFFE's MANUFACTURER_ID (i.e.
MANUFACTURER_ID[11:8] =
MANUFACTURER_ID_MSB
[3:0]
MAN_US_ID
4b0011
MANUFACTURER_ID_MSB[3:0]
Programmable USID. Performing a write to this register
using the described programming sequences will program
the USID in devices supporting this feature. These bits
store the USID of the device.
This is a read-only register. However, during the
programming of the USID a write command sequence is
performed on this register, even though the write does
not change its value.
This is an RFFE2 register to contain information about
the revision of this module. The intent here is to use this
as a type of scratch register -- to contain various
information or serialization.
0x1F
0x20
0x21
Reg31[3:0]
Reg32[7:0]
Reg33[7:0]
MAN_US_ID
EXT_PRODUCT_ID
REVISION_ID
USID[3:0]
4b1111
RM
RM
RM
No
No
No
No
No
No
EXT_PRODUCT_ID[7:0]
REVISION_ID[7:0]
8b00000000
8b00000000
0x22
0x22
Reg34[7:4]
Reg34[3:0]
GROUP_ID2
GROUP_ID2
GSID0_2[3:0]
GSID1_2[3:0]
4b0000
4b0000
Group slave ID 0
Group slave ID 1
R/W
R/W
No
No
No
No
0: Normal operation
1: Software reset (reset of all configurable registers to
default values, except for USID)
UDR_RST
(RFFE_STATUS2)
0x23
Reg35[7]
SW_RESET_2
1b0
R/W
No
No
UDR_RST
(RFFE_STATUS2)
UDR_RST
(RFFE_STATUS2)
UDR_RST
(RFFE_STATUS2)
UDR_RST
(RFFE_STATUS2)
UDR_RST
(RFFE_STATUS2)
UDR_RST
(RFFE_STATUS2)
UDR_RST
0x23
0x23
0x23
0x23
0x23
0x23
0x23
Reg35[6]
Reg35[5]
Reg35[4]
Reg35[3]
Reg35[2]
Reg35[1]
Reg35[0]
Reserved_Reg35_b6
Reserved_Reg35_b5
Reserved_Reg35_b4
Reserved_Reg35_b3
Reserved_Reg35_b2
Reserved_Reg35_b1
Reserved_Reg35_b0
1b0
1b0
1b0
1b0
1b0
1b0
1b0
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
R/W
R/W
R/W
R/W
R/W
R/W
R/W
No
No
No
No
No
No
No
No
No
No
No
No
No
No
(RFFE_STATUS2)
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
8 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
TX FFE Registers (RFFE1)
Mask
Write
Support
Register
address
Default
[msb:lsb]
Read/ Trigger
Write support
Data Bits
Register Name
Qorvo Bit Field Name
Qorvo Description
0: Normal operation (ACTIVE)
1: Secondary mode (LOW POWER)
0x1C
Reg28[7]
Reg36[7]
PM_TRIG
PWR_MODE
1b1
1b0
1b0
1b0
1b0
1b0
1b0
1b0
R/W
R/W
No
No
No
No
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
ERR_SUM
(RFFE_STATUS3)
BUS_LOAD
0x24
Reserved_Reg36_b7
Reserved
Command sequence received with parity error – discard
command.
Command length error
0x24
0x24
0x24
0x24
0x24
0x24
Reg36[6]
Reg36[5]
Reg36[4]
Reg36[3]
Reg36[2]
Reg36[1]
CMD_FRAME_P_ERR_2
CMD_LEN_ERR_2
R/W
R/W
R/W
R/W
R/W
R/W
No
No
No
No
No
No
No
No
No
No
No
No
Address frame parity error = 1
ADDR_FRAME_P_ERR_2
DATA_FRAME_P_ERR_2
READ_UNUSED_REG_2
WRITE_UNUSED_REG_2
Data frame with parity error
Read command to an invalid address
Write command to an invalid address
Read command with a Broadcast_ID or GROUP_ID
1b0
0x24
0x2B
Reg36[0]
Reg43[7:4]
BID_GID_ERR_2
reserved_Reg_43
R/W
R/W
No
No
No
No
4b0000
Reserved
SDATA Driver strength in Readback Mode
0x0: 10pf
0x3: 40pf
0x6: 80pf
0x1: 20pf
0x4: 50pf
0x7: 100pf
0x2: 30pf
0x5: 60pf
0x8: 120pf
4b0100
R/W
R
No
No
No
No
0x9: 140pf 0xA: 160pf 0xB: 180pf
0xC: 200pf 0xD: 250pf
0xE-0xF: reserved
8b11010010 A read of this register returns the test pattern
0x2B
0x2C
Reg43[3:0]
Reg44[7:0]
BUS_LOAD
TEST_PATTERN
BUS_LOAD[3:0]
Test_Pattern[7:0]
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
9 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
VIO Power On Reset (POR) Timing
For applications where MIPI RFEE VIO is turned ON/OFF in accordance with MIPI RFEE bus activity, the timing recommendations below
should be used to ensure error-free RFEE register writes following VIO power on reset (POR)
Parameter
Description
MIN
TYP
MAX
VIOH
VIO High Voltage
1.65V 1.80V 1.95V
VIO_RST VIO Reset Voltage
TVIO_RST VIO Reset Time
TVIO_RST VIO Rise Time
0V
10µs
1µs
0V
0.45V
-
-
-
-
400µs
-
T_SIGOL Minimum Wait Time after TVIO_R
190µs
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
10 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Application Schematic
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
11 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Evaluation Board Layout
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
12 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Evaluation Board Layout (continued)
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
13 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Evaluation Board Schematic
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
14 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Evaluation Board Bill of Materials (BOM)
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
15 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Pin Configuration and Description
Top View (looking through device)
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
16 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Pin Configuration and Description (continued)
PIN NUMBER LABEL
DESCRIPTION
1
GND
Ground
Ground
RX Output
Ground
Ground
Ground
Ground
2
GND
3
RXout_n41
GND
4
5
GND
6
GND
7
GND
8
VCC_CAP_SW Switchable Ground connection for large external SMD Bypass Capacitor
9
VCC2
GND
Supply voltage for n41 2nd stage PA
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Ground
VCC1
GND
Supply voltage for n41 1st and stage PA
Ground
VBATT
GND
Battery supply voltage for controller
Ground
TX
N41 PA RF Input
GND
Ground
VIO
Supply voltage for MIPI RFFE interface
SCLK
SDATA
GND
Clock signal for MIPI RFFE interface
Data signal for MIPI RFFE interface
Ground
CPL_IN
GND
Coupler Input Port
Ground
CPL_OUT
GND
Coupler Output Port
Ground
Ant_n41
GND
N41 Antenna Port
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
17 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Mechanical Information – Dimensions
Package Marking and Dimensions
Marking: Part number –QM75041
Notes:
1.
2.
3.
All dimensions are in mm. Angles are in degrees.
Dimension and tolerance formats conform to ASME Y14.4M-1994.
The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
18 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Mechanical Information – Package Marking
QM75041 Data Sheet - Rev F | Subject to change without notice
19 of 25
www.qorvo.com
ADVANCED
QM75041
UHB 5G PAMiD Module
Mechanical Information – Recommended Land Pattern and Mask
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
20 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Tape and Reel Information – Carrier and Cover Tape Dimensions
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
21 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Tape and Reel Information – Reel Dimensions
Packaging reels are used to prevent damage to devices during shipping and storage. Loaded carrier tape is typically wound onto a
plastic take-up reel. The reels are made from high-impact injection-molded polystyrene (HIPS), which offers mechanical and ESD
protection to packaged devices. The reel size is either 7” or 13” in diameter based on the minimum number of samples. Standard T/R
size = 5000 pieces on a 13” reel and 1000 pieces on a 7” reel.
Packaging Reel for 12mm Wide Carrier Tape
7” Reel
13” Reel
PART
FEATURE
SYMBOL
SIZE (in)
SIZE
(mm)
SIZE
(in)
SIZE
(mm)
FLANGE
DIAMETER
THICKNESS
A
W2
W1
N
6.969
0.717
0.504
2.283
0.512
0.079
0.787
177.0 12.992
330
18.2
12.8
102.0
13.0
2.0
18.2
12.8
58.0
13.0
2.0
0.717
0.504
4.016
0.512
0.079
0.787
SPACE BETWEEN FLANGE
OUTER DIAMETER
ARBOR HOLE DIAMETER
KEY SLIT WIDTH
HUB
C
B
KEY SLIT DIAMETER
D
20.0
20.0
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
22 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
Tape and Reel Information – Tape length and label placement
. Standard T/R size = 5000 pieces on a 13” reel and 1000 pieces on a 7” reel.
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481.
2. Labels are placed on a flange opposite the sprockets in the carrier tape.
QM75041 Data Sheet - Rev F | Subject to change without notice
23 of 25
www.qorvo.com
ADVANCED
QM75041
UHB 5G PAMiD Module
Handling Precautions
Parameter
Rating
Standard
All pins other
than pin 8
Class 1C, Pin
8 Class1B
ESD – Human Body Model (HBM)
ESDA/JEDEC JS-001-2012
Caution!
ESD sensitive device
ESD – Charged Device Model (CDM)
MSL – Moisture Sensitivity Level
Class C2A
MSL3
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
24 of 25
ADVANCED
QM75041
UHB 5G PAMiD Module
REVISION HISTORY
Revision
Date
Description
F2
2020-01-23
Baseline
QM75041 Data Sheet - Rev F | Subject to change without notice
www.qorvo.com
25 of 25
相关型号:
©2020 ICPDF网 联系我们和版权申明