QM77038SB [QORVO]
Linear Multi-Mode Mid and High Band S-PAD;
| 型号： | QM77038SB |
| 厂家： | 
Qorvo |
| 描述： | Linear Multi-Mode Mid and High Band S-PAD |
| 文件： | 总43页 (文件大小：1661K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Product Overview
The Qorvo® QM77038 is a multi-mode, high efficiency linear Mid
Band and High Band S-PAD (Switched PA plus Duplexer)
module designed for use as the integrated RF front-end in multi-
mode WCDMA / CDMA / LTE / NR mobile cellular equipment.
The high efficiency S-PAD contains three amplifier paths for
3G/4G/5G Mid and High Band frequencies followed by
distribution switches, filters, duplexers, quadplexers and
antenna switches for multi-band coverage of both transmit and
receive functions. QM77038 band select and bias are
programmed through the Mobile Industry Processor Interface
(MIPI) bus. The QM77038 transmit-receive module supports
Average Power Tracking (APT) for higher system efficiency at
various power levels and modulations, as well as Envelope
Tracking (ET) for current consumption optimization.
62 Pin 6.5x8.6 mm leadless SMT Package
Key Features
• Multi-Mode and Multi Band Capabilities;
WCDMA/CDMA2000/ FDD-LTE/TDD-LTE / NR
• Integrated Band 1, 3, 4, 7, 32, 34, 39, 40 and 41(38) Filters
for Transmit and Receive
• Additional Bands Through External AUX Paths
• MIPI RFFE Digital Control Interface
• Intra-Band Uplink and Downlink Ca23rrier Aggregation (CA):
B1, B3, B7, B39, B40, B41.
The QM77038 is packaged in a RoHS-compliant, compact
62-pin, 6.5 x 8.6 x 0.8 (max) mm surface-mount leadless
package.
• Inter-band Downlink Carrier Aggregation (DL CA):
• B1+B3, B1+B3+B7, B1+B3+B40, B1+B3+B41N,
• B3+B40, B3+B7+B32, B34+B39, B39+B41.
• Designed and Optimized for Use with DC-DC Converter
• Support of Average Power Tracking (APT) and Envelope
Tracking (ET) for High System Efficiency and Performance
Functional Block Diagram
CPL OUT
B3/B4/B66 Tx
B1 Tx
B1/3/4/66
B34/39
• Supports Power Class 2 (PC2) for B40 & B41.
• Supports 5G NR for n1, n3, n40, and n41 (38).
• Power Modes and Bias Programmable with MIPI RFFE 2.1
Interfaces
MB IN
B40 TRx
B1/B4/B66 Rx
B3 Rx
ANT 1
ANT 2
B32 Rx
B7
B7 Tx
B7 Rx
HB IN
TRx 2
B41N TRx
TRx 3
TRx 4
B30
B38/40/4141N
Applications
B34 TRx
B39 TRx
B41 TRx
2G HB IN
SDATA
SCLK
• 3G/4G/5G Multi-Mode Handsets
MIPI
• WCDMA and LTE Data Cards or Wearable Devices
• High Performance Communication Systems
• LTE Single Carrier Channel Bandwidths up to 20MHz
Functional Block Diagram
Ordering Information
PART NUMBER
QM77038TR13
DESCRIPTION
13” Reel with 5000 pieces
Evaluation board and 5 pc sample
QM77038PCK-APT
QM77038SB
Sample Bag with 5 pc sample
Design Kit includes EVB with
module, RD2000 Communication
Board and Harness.
QM77038DK-APT
Data Sheet 20200415 | Subject to change without notice
www.qorvo.com
1 of 43
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Absolute Maximum Ratings
PARAMETER
CONDITIONS
Rating
Storage Temperature
Operating Temperature
−55 to +150 °C
−30 to +85 °C
+6.0 V
Standby Mode
Idle Mode
Supply Voltage, VCC
+6.0 V
Operating Mode
+5.0 V
Supply Voltage, VBATT
-1.2V to +6.0 V
+2 V
Digital control signals (VIO, SLCK, SDATA)
RF Input Power
CW, 50ꢀΩ, T = 25ꢀ°C
+10 dBm
Output Load VSWR (Ruggedness)
Ant and MB_HB Tx Aux Ports
No damage or permanent performance
degradation.
Ruggedness is guaranteed with closed loop
condition with fixed Forward Pout=Prated.
10:1
10:1
VBATT = 4.8V, VCC = 4.6V.
Temp = -30 / 25 / +85°C.
Ruggedness is guaranteed with fixed Pin (1)
(Open loop) condition.
Calibration Output Load VSWR (Ruggedness)
Ant and MB_HB Tx Aux Ports
Pout = Max Prated + 2dB or P1dB.
Vcc = 4.6V, Vbatt = 4.8V.
No damage or permanent performance
degradation.
Phase = 15/step, 10s dwell at each step.
Temp = -30 / 25 / 85 C.
Notes: 1. Pin is defined as the RF input level that delivers Max Prated+2dB or P1dB (if PA is saturated and cannot achieve Prated+2dB) into 50 load, at L/M/H frequencies
for each band, and at each temperature. 2. Pin is defined as the CW signal input level that delivers target power into 50 load, at L/M/H frequencies for each band, and at
each temperature.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of the Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is
not implied.
Recommended Operating Conditions
PARAMETER
MIN.
TYP.
MAX.
2690
+85
+4.8
+4.6
+1.95
400
UNITS
MHz
°C
Operating Frequency Range
Operating Ambient Temperature
Supply Voltage, VBATT
Supply Voltage, VCC1, VCC2
Supply Voltage, VIO
1452
-
-20
+25
+3.0
+0.5(1)
3.8
V
3.8
V
+1.65
+1.8
V
VIO Rise Time
-
-
µs
RF Input Power
-
-
+6
dBm
V
SCLK, SDATA Logic Low
SCLK, SDATA Logic HIGH
SCLK, SDATA Input, Current
SCLK Write Speed
0
-
0.3*VIO
VIO
50
0.8*VIO
-
V
-
-
-
-
-
µA
38.4
52
MHz
MHz
µA
SCLK Read Speed
-
-
26
Total Leakage Current (ICC+IBAT)
20
Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions.
Notes:
1. VCC down to 0.5V may be used for backed-off power when using DC-DC converter to reduce low power current drain. Refer to Look-up Table (LUT) for
recommended VCC settings for each output power level.
www.qorvo.com
2 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
5G NR Waveforms
5G Waveform Duplex Mode Channel BW
SCS
Modulation
RB Allocation RB Allocated RB start
MPR
NR 1
NR2
FDD
FDD
FDD
FDD
FDD
FDD
TDD
TDD
TDD
TDD
TDD
TDD
50
50
30
30
30
15
15
15
30
30
30
30
30
30
OFDM QPSK
OFDM QPSK
Inner_Full
Outer_Full
Outer_Full
Inner_Full
Outer_Full
Outer_Full
Inner_Full
Outer_Full
Outer_Full
Inner_Full
Outer_Full
Outer_Full
64
32
0
0
1
128
128
80
NR 3
NR 4
NR 5
NR 6
NR 7
NR 8
NR 9
NR 10
NR 11
NR 12
50
OFDM 256QAM
OFDM QPSK
0
4.5
0
30
40
0
30
OFDM QPSK
160
160
135
270
270
108
216
216
1
30
OFDM 256QAM
OFDM QPSK
0
4.5
0
100
100
100
80
67
0
OFDM QPSK
1
OFDM 256QAM
OFDM QPSK
0
4.5
0
54
0
80
OFDM QPSK
1
80
OFDM 256QAM
0
4.5
www.qorvo.com
3 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Electrical Specifications
Parameter
Conditions
Min.
Typ.
Max.
Units
5G NR
Unless otherwise stated:
n1
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
TX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Maximum Linear Output Power
NR Band n1
1920
25.5
25
1980
MHz
dBm
HPM, VCC = 3.8V
HPM, VCC = 3.8V
NR 1
NR 1
27.5
26.5
31
32
HPM, VCC = 3.8V, VBAT=3.8V,
Temp = -20°C to +85°C
NR 1
22
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC ≤ 0.7V, Pout = 1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
NR 1
NR 1
NR 1
NR 1
NR 1
NR 2
NR 2
NR 2
NR 3
20
14
10
23
18
26
22
PAE
14.5
640
100
-38
-42
-48
1.6
%
800
200
-33
-36
-39
2.1
Current Consumption
mA
EUTRA ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
dBc
%
www.qorvo.com
4 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
4G FDD LTE
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
Band 1
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 1
1920
26.5
25.5
1980
MHz
ET Mode
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V,
Temp = -20°C to +85°C
24.5
25
HPM, VCC = 3.8V
27.5
26.5
30.5
31.5
HPM, VCC = 3.8V, VBATT=3.8V,
Temp = -20°C to +85°C
22
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.70V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
20
14
23
18
26
22
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-42
-43
dBc
-62
1.25
--
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
10
10
15
Quiescent Current
150
650
100
-183
-184
-181
-185
-184
-165
-170
-175
-192
-172
-75
200
800
mA
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.70V, Pout = 1.5dBm
2110 – 2170MHz, 20MHz QPSK 50RB
DL CA B1 + B32, 1452 – 1496MHz, HPM
DL CA B1 + B7, 2620 – 2690MHz, HPM
DL CA B1 +B3, Tx = Low Channel, HPM
DL CA B1 +B3, Tx=Hi Channel, HPM
699 – 960MHz, 40MHz QPSK 200RB
2300 – 2700MHz, 40MHz QPSK 200RB
3400 – 3600MHz, 40MHz QPSK 200RB
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
Current Consumption
mA
200
RX Band Noise
-176
-173
-173
-173
-173
-150
-155
-160
-177
-160
-60
B32 Rx Band Noise
B7 Rx Band Noise
B3 RX Band Noise
(1805 – 1880MHz)
dBm/Hz
LB RX Band Noise
HB RX Band Noise
B42 RX Band Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
Harmonics
3f0
-65
-50
dBm
dBc
≥4f0
-68
-48
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -20°C to +85°C
www.qorvo.com
5 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
3G WCDMA
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
Band 1
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
TX Electrical Specifications
Temp = 25°C, VCC = 3.8V, VBATT= 3.8V, APT Mode, R99
Operational Frequency Range
Maximum Output Power
Band 1
1920
26.5
1980
MHz
dBm
HPM, VCC = 3.8V
HPM, VCC = 3.8V, VBATT= 3.8V,
Temp = -20°C to +85°C
25.5
24.5
21.5
HPM, VCC = 3.8V
27.5
26.5
30.5
31.5
Gain
dB
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
UMTS ACLR1 (±5MHz)
UMTS ACLR2 (±10MHz)
EVM
Pout ≤ Pmax
-45
-58
1.0
-36
-46
5
dBc
Pout ≤ Pmax
All Condition
%
%
PAE
HPM, Pout = Pmax
HPM, Pout = Pmax
11
16
Current Consumption
Phase discontinuity variation
RX Band Noise
730
--
900
10
mA
Degree
Pout ≤ Pmax
2400 to 2483 MHz
5150 to 5850 MHz
1574 to 1577 MHz
2f0
-190
-185
-190
-178
-68
-60
-175
-170
-175
-166
-53
ISM 2.4G Noise
dBm/Hz
dBm
ISM 5G Noise (except harmonics)
GPS Band Noise
Harmonics
3f0
-45
www.qorvo.com
6 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode.
Band B1,B4,B66 RX
RX Electrical Specifications
Band 1
2110
2110
2110
2170
2155
2180
4.1
Operational Frequency Range
Band 4
MHz
Band 66 (70 MHz)
Band 1,4 (2110 – 2170 MHz)
Band 1,4 (2110 – 2170 MHz) ETC
Band 66 (2110 – 2180 MHz)
Band 66 (2110 – 2180 MHz) ETC
Band 66 -2 (2110 – 2200 MHz)
Band 1 + 41N
3.2
3.2
4.5
4.2
Insertion Loss
RX Port VSWR
Attenuation
4.6
dB
5.0
4.5
Band 1 + 7
4.5
2
X:1
dB
B3 TX, 1710 – 1785MHz
LB TX, 699 – 960MHz
HB TX, 2300 – 2690MHz
B42 TX, 3400 – 3600MHz
ISM 2.4G
45
45
50
55
45
35
60
60
65
70
60
50
ISM 2.5G
TX to RX Isolation
Self-Isolation at RX Band
2110 – 2180MHz
15
18
30
-32
33
dB
Self-Isolation TX power to RX port
Cross Isolation at B3 RX Band
Cross B3 TX power to B1 RX port
1920 – 1980MHz, 5 MHz QPSK 25RB
1805 – 1880MHz
-26
-23
dBm/5MHz
dB
1710 – 1785MHz, 1.4MHz QPSK 6RB
-26
dBm/1.4MHz
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
7 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Parameter
Conditions
Min.
Typ.
Max.
Units
5G NR
Unless otherwise stated:
n3
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
TX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Maximum Linear Output Power
NR Band n3
1710
25.5
26.5
1785
MHz
dBm
HPM, VCC = 3.8V,
HPM, VCC = 3.8V
NR 4
NR 4
29
28
32
HPM, VCC = 3.8V, VBAT=3.8V,
Temp = -20°C to +85°C
NR 4
23.5
33.4
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC ≤ 0.7V, Pout = 1.5dBm
n3, HPM, VCC = 3.8V, Pout ≤ Pmax
n3, HPM, VCC = 3.8V, Pout ≤ Pmax
n3, HPM, VCC = 3.8V, Pout ≤ Pmax
n3, HPM, VCC = 3.8V, Pout ≤ Pmax
NR 4
NR 4
NR 4
NR 4
NR 4
NR 5
NR 5
NR 5
NR 6
21
15
10
24
19
27
23
PAE
15
%
600
90
750
180
-33
-36
-39
2.1
Current Consumption
mA
EUTRA ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-43
-45
-53
1.0
dBc
%
www.qorvo.com
8 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G FDD LTE
Unless otherwise stated:
Band 3/4/66
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Band 3
1710
1710
1710
26.5
25.5
1785
1755
1780
Operational Frequency Range
Maximum Linear Output Power
Band 4
MHz
Band 66
ET Mode
HPM, VCC = 3.8V
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
25.5
22.5
HPM, VCC = 3.8V
28
27
31.5
32.5
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
20
15
23
19
26
23
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
-48
-50
dBc
-58
1.0
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
--
10
10
15
Quiescent Current
100
635
90
200
800
180
-176
-173
-173
-175
-160
-160
-155
-160
-153
-47
mA
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.5dBm
1805 – 1880MHz, 20MHz QPSK 50RB
DL CA B3 + B32, 1452 – 1496MHz, HPM
DL CA B3 + B7, 2620 – 2690MHz, HPM
DL CA B3 + B1, 2110 – 2170MHz, HPM
699 – 960MHz, 40MHz QPSK 200RB
2300 – 2700MHz, 40MHz QPSK 200RB
3400 – 3600MHz, 40MHz QPSK 200RB
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
Current Consumption
mA
RX Band Noise
-185
-178
-181
-186
-175
-175
-170
-175
-168
-62
B32 Rx Band Noise
B7 Rx Band Noise
B1 Rx Band Noise
LB RX Band Noise
HB RX Band Noise
B42 RX Band Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
3f0
-72
-57
Harmonics
dBm
dBc
4f0
-40
-33
≥5f0
-75
-65
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
9 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode.
Band 3 RX
RX Electrical Specifications
Operational Frequency Range
Insertion Loss
Band 3
1805
1880
3.8
MHz
dB
Band 3
2.9
Band 3 ETC
Band 3 + 41N
Band 3 + 7
4.3
4.3
4.3
RX Port VSWR
2.5
60
75
68
56
67
58
X:1
B1 TX, 1920 – 1980MHz
LB TX, 699 – 960MHz
HB TX, 2300 – 2690MHz
B42 TX, 3400 – 3600MHz
ISM 2.4G, 2400 - 2484
ISM 5G, 5150 - 5850
45
60
53
41
52
43
Attenuation
dB
TX to RX Isolation
Self-Isolation at RX Band
1805 – 1880MHz
24
20
40
-30
33
dB
Self-Isolation TX power to RX port
Cross Isolation at B1 RX Band
Cross TX power B1 TX to B3 RX
1710 – 1785MHz, 1.4MHz QPSK 6RB
2110 – 2200MHz
-25.5
-25.5
dBm/1.4MHz
dB
1920 – 1980MHz, 5MHz QPSK 25RB
-32
dBm/5MHz
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 32 RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 32
1452
1496
4.1
4.6
MHz
dB
Band 32
3.1
Band 32 ETC
Band 32 +1
Band 32 + 3
Band 32 +7
4.6
4.6
4.6
RX Port VSWR
2.5
62
X:1
dB
ISM 2.4G, 2400 – 2484 MHz
47
47
Attenuation
ISM 5G, 4905 – 5850 MHz.
72
Cross TX power B3 TX to B32 RX
1710.7 – 1784.3MHz, 1.4MHz QPSK 6RB
-24
-22
dBm/1.4MHz
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
10 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G TDD LTE
Unless otherwise stated:
Band 34
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 34
2010
26.5
25.5
2025
MHz
ET Mode
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
26.5
23.5
HPM, VCC = 3.8V
29
28
31
33
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
21
15
24
19
27
23
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-43
-45
-60
1.3
--
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.5dBm
2300 – 2700MHz, 15MHz QPSK 75RB
5150 – 5850MHz, 15MHz QPSK 75RB
1574 – 1577MHz, 15MHz QPSK 75RB
2f0
10
12
17
Quiescent Current
100
575
90
200
750
180
-148
-158
-152
-60
mA
Current Consumption
mA
HB RX Band Noise
-163
-173
-167
-75
-73
-70
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
Harmonics
3f0
-58
dBm
dBc
≥4f0
-50
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
11 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
3G TD-SCDMA
Band 34
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, TD-SCDMA modulation
TX Electrical Specifications
Operational Frequency Range
Maximum Output Power
Band 34
2010
26.5
2025
MHz
dBm
HPM, VCC = 3.8V
HPM, VCC = 3.8V, VBATT = 3.8V,
Temp = -20°C to +85°C
25.5
26.5
23.5
HPM, VCC = 3.8V
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Pout ≤ Pmax
29
28
31
33
Gain
dB
UMTS ACLR1 (±1.6MHz)
UMTS ACLR2 (±3.2MHz)
EVM
-50
-67
1.3
-36
-46
5
dBc
Pout ≤ Pmax
All Condition
%
%
PAE
HPM, Pout = Pmax
14
19
Current Consumption
HPM, Pout = Pmax
925 – 935MHz
935 – 960MHz
1805 – 1880MHz
2400 to 2483 MHz
5150 to 5850 MHz
1574 to 1577 MHz
2f0
650
-116
-166
-114
-164
-168
-172
-75
825
-101
-151
-100
-150
-153
-157
-60
mA
RX Band Noise
dBm/100kHz
ISM 2.4G Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
dBm
Harmonics
3f0
-73
-58
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 34 RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 34
2010
2025
3.4
MHz
dB
Band 34
2.4
Band 34 ETC
4.5
RX Port VSWR
2
X:1
B41 TX, 2496 – 2690MHz
ISM 2.4G, 2400 – 2484 MHz
ISM 5G, 5150 – 5850 MHz
35
35
45
50
50
60
Attenuation
dB
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
12 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G TDD LTE
Unless otherwise stated:
Band 39
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 39
1880
26.5
25.5
1920
MHz
ET Mode
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
27.5
24.5
HPM, VCC = 3.8V
30
29
33
34
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.3V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
22
25
19.5
-48
-50
-57
1.2
--
28
23.5
-33
-36
-39
5
15.5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.5dBm
2300 – 2700MHz, 35MHz QPSK 175RB
5150 – 5850MHz, 20MHz QPSK 100RB
1574 – 1577MHz, 20MHz QPSK 100RB
2f0
10
12
17
Quiescent Current
150
575
95
300
750
190
-160
-170
-162
-40
mA
Current Consumption
mA
HB RX Band Noise
-175
-185
-177
-75
-73
-69
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
Harmonics
3f0
-58
dBm
dBc
≥4f0
-50
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
13 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
3G TD-SCDMA
Band 39
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, TD-SCDMA modulation
TX Electrical Specifications
Operational Frequency Range
Maximum Output Power
Band 39
1880
26.5
1920
MHz
dBm
HPM, VCC = 3.8V
HPM, VCC = 3.8V, VBATT = 3.8V,
Temp = -20°C to +85°C
HPM, VCC = 3.8V
25.5
27.5
24.5
30
29
33
34
Gain
dB
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
UMTS ACLR1 (±1.6MHz)
UMTS ACLR2 (±3.2MHz)
EVM
Pout ≤ Pmax
-51
-66
-36
-46
5
dBc
Pout ≤ Pmax
All Condition
1.3
%
%
PAE
HPM, Pout = Pmax
HPM, Pout = Pmax
925 – 935MHz
935 – 960MHz
1805 – 1880MHz
2400 to 2483 MHz
5150 to 5850 MHz
1574 to 1577 MHz
2f0
14
19
Current Consumption
675
-116
-116
-117
-164
-182
-176
-75
850
-101
-101
-102
-150
-167
-161
-40
mA
RX Band Noise
dBm/100kHz
ISM 2.4G Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
dBm
Harmonics
3f0
-73
-58
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 39 RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 39
1880
1920
3.4
MHz
dB
Band 39
2.5
Band 39 ETC
Band 39 +41
3.8
3.8
RX Port VSWR
2.5
60
55
60
X:1
dB
B41 TX, 2496 – 2690MHz
ISM 2.4G, 2400 – 2484 MHz
ISM 5G, 5150 – 5850 MHz
40
40
45
Attenuation
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
14 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G LTE MB
Unless otherwise stated:
MB_TX1, MB_TX2
TX Electrical Specifications
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
Operational Frequency Range
Mid Band
1710
29
2025
MHz
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
28
28
25
HPM, VCC = 3.8V
30.5
29.5
33.5
35.5
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.3V, Pout=15dBm
LPM, VCC =0.7V, Pout=5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
24
17
27
21
30
25
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-41
-42
-54
1.5
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 5dBm
1930 – 1990MHz, HPM
-
10
25
30
Quiescent Current
150
675
95
200
850
190
-127
-133
-135
-138
-145
-122
0
mA
Current Consumption
mA
B2 Rx In Band Noise
2.4G Noise
-128
-150
-150
-153
-160
-137
-10
-20
-20
2401 – 2495 MHz, HPM
LB RX Band Noise
HB RX Band Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
699 – 960MHz, 20MHz QPSK 100RB
2300 – 2700MHz, 20MHz QPSK 100RB
5150 – 5850MHz, 20MHz QPSK 100RB
1574 – 1577MHz, 20MHz QPSK 100RB
2f0
dBm/Hz
Harmonics
3f0
-10
dBm
dBc
≥4f0
0
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
15 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
3G WCDMA
Unless otherwise stated:
MB_TX1, MB_TX2
TX Electrical Specifications
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VCC = 3.8V, VBATT= 3.8V, APT Mode, R99
Operational Frequency Range
Band 2
1850
29.5
1910
MHz
dBm
HPM, VCC = 3.8V
Maximum Output Power
HPM, VCC = 3.8V, VBATT = 3.8V,
Temp = -20°C to +85°C
28.5
28.5
25.5
HPM, VCC = 3.8V
31
30
34
35
Gain
dB
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
UMTS ACLR1 (±5MHz)
UMTS ACLR2 (±10MHz)
EVM
Pout ≤ Pmax
-46
-57
1.5
30
-36
-47
5
dBc
Pout ≤ Pmax
All Condition
%
%
PAE
HPM, Pout = Pmax
HPM, Pout = Pmax
25
Current Consumption
Phase discontinuity variation
ISM 2.4G Noise
770
925
15
mA
-15
Degree
2400 to 2483 MHz
5150 to 5850 MHz
1574 to 1577 MHz
2f0
-146
-145
-140
-14
-131
-130
-125
0
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
dBm
Harmonics
3f0
-27
-12
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
3G CDMA2000
Unless otherwise stated:
MB_TX1, MB_TX2
TX Electrical Specifications
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, 1xRTT C2k
Operational Frequency Range
Band Class 1
1850
29.5
1910
MHz
dBm
HPM, VCC = 3.8V
Maximum Output Power
HPM, VCC = 3.8V, VBATT = 3.8V,
Temp = -20°C to +85°C
28.5
28
HPM, VCC = 3.8V
30.5
30
34
35
Gain
dB
HPM, VCC = 3.8V, VBATT=3.8V,
Temp = -20°C to +85°C
25
CDMA ACLR1 (±1.25MHz)
CDMA ACLR2 (±1.98MHz)
EVM
Pout ≤ Pmax
-60
-72
1.5
30
-45
-53
5
dBc
Pout ≤ Pmax
All Condition
%
%
PAE
HPM, Pout = Pmax
HPM, Pout = Pmax
25
Current Consumption
Phase discontinuity variation
ISM 2.4G Noise
760
950
15
mA
-15
Degree
2400 to 2483 MHz
5150 to 5850 MHz
1574 to 1577 MHz
2f0
-144
-145
-139
-9
-130
-130
-125
0
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
dBm
Harmonics
3f0
-20
-5
www.qorvo.com
16 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
4G FDD LTE
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
Band 7
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 7
2500
26.5
25.5
2570
MHz
ET Mode
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
25
HPM, VCC = 3.8V
27.5
26.5
31
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
22
33.8
Gain
dB
LPM, VCC =1.2V, Pout=8.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
20
14
23
18
26
22
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-40
-42
dBc
-55
1.8
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
--
10
10
15
Quiescent Current
125
650
95
200
890
190
-176
-175
-173
-173
-170
-165
-140
-170
-167
-57
mA
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.5dBm
2620 – 2690MHz, 20MHz QPSK 75RB
DL CA B7 + B1, 2110 – 2170MHz, HPM
DL CA B7 + B3, 1805 – 1880MHz, HPM
DL CA B7 + B32, 1452 – 1496MHz, HPM
699 – 960MHz, 40MHz QPSK 200RB
1452 – 2200MHz, 40MHz QPSK 200RB
2400 – 2472MHz, 20MHz QPSK 100RB
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
Current Consumption
mA
RX Band Noise
-180
-184
-187
-180
-185
-180
-154
-185
-182
-72
B1 Rx Band Noise
B3 Rx Band Noise
B32 Rx Band Noise
LB RX Band Noise
MB RX Band Noise
UL20M ISM Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
Harmonics
3f0
-72
-57
dBm
dBc
≥4f0
-65
-45
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
17 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 7 RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 7
2620
2690
4.2
MHz
dB
Band 7
3.4
Band 7 ETC
Band 7 + 1
Band 7 + 3
4.7
4.7
4.7
RX Port VSWR
Attenuation
2.5
58
57
60
70
X:1
dB
LB TX, 699 – 960MHz
43
42
45
55
MB TX, 1427 – 1980MHz
ISM 2.4G, 2400 – 2484 MHz
ISM 5G, 5150 – 5850 MHz
TX to RX Isolation
Self-Isolation at RX Band
2620 – 2690MHz
30
45
-35
-27
dBc
Self-Isolation TX power to RX port
Cross B1 TX power to B7 RX port
2500 – 2570MHz, 5MHz QPSK 25RB
1922.2 – 1977.5MHz, 5MHz QPSK 6RB
-25.5
-23
dBm/5MHz
dBm/5MHz
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
18 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Parameter
Conditions
Min.
Typ.
Max.
Units
5G NR
Unless otherwise stated:
n40
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
TX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Maximum Linear Output Power
NR Band n40
2300
25.5
25
2400
MHz
dBm
HPM, VCC = 3.8V,
HPM, VCC = 3.8V
NR 10
NR 10
27.5
26.5
30.5
31.5
HPM, VCC = 3.8V, VBAT=3.8V,
Temp = -20°C to +85°C
NR 10
22
Gain
dB
LPM, VCC =1.1V, Pout=11.5dBm
LPM, VCC =0.6V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC ≤ 0.6V, Pout = 1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
NR 10
NR 10
NR 10
NR 10
NR 10
NR 11
NR 11
NR 11
NR 12
21
14
10
24
18
27
22
PAE
15
%
625
85
800
170
-33
-36
-39
2.1
Current Consumption
mA
EUTRA ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-39
-41
-49
1.6
dBc
%
www.qorvo.com
19 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G TDD LTE
Unless otherwise stated:
Band 40
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 40
2300
26.5
25.5
2400
MHz
ET Mode
Maximum Linear Output Power
(Power Class 3)
HPM, VCC = 3.8V
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
ET Mode
28
27
Maximum Linear Output Power
(Power Class 2)
HPM, VCC = 4.2V
dBm
HPM, VCC = 4.2V, VBATT=3.8V,
Temp = -20°C to +85°C
26
25
22
HPM, VCC = 3.8V
27.5
26.5
30.5
31.5
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.1V, Pout=11.5dBm
LPM, VCC =0.6V , Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
21
14
24
18
27
22
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-45
-46
-54
1.5
--
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.6V, Pout = 1.5dBm
699 – 960MHz, 40MHz QPSK 200RB
1452 – 2200MHz, 40MHz QPSK 200RB
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
10
10
15
Quiescent Current
120
625
85
200
800
170
-169
-127
-167
-168
-60
mA
Current Consumption
mA
LB RX Band Noise
-184
-142
-182
-183
-75
-70
-65
MB RX Band Noise
dBm/Hz
ISM 5G Noise (except harmonics)
GPS Band Noise
Harmonics
3f0
-55
dBm
dBc
≥4f0
-50
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
20 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 40 RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 40
2300
2400
4.4
MHz
dB
Band 40
3.4
Band 40 ETC
Band 40 + 3
4.9
4.9
RX Port VSWR
2
X:1
dB
LB TX, 699 – 960MHz
51
48
43
66
63
58
Attenuation
MB TX, 1427 – 1980MHz
ISM 5G, 5150 – 5850 MHz
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
21 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Parameter
Conditions
Min.
Typ.
Max.
Units
Unless otherwise stated:
5G NR
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
n41 (n38)
Temp = 25°C, VBATT = 3.8V, APT Mode.
TX Electrical Specifications
Operational Frequency Range
Maximum Linear Output Power
NR Band n38
2570
2496
25.5
26
2620
2690
MHz
MHz
dBm
NR Band n41
HPM, VCC = 4.2V,
HPM, VCC = 4.2V
NR 7
NR 7
NR 7
29
28
32
33
HPM, VCC = 4.2V, VBAT=3.8V,
Temp = -20°C to +85°C
23
Gain
dB
LPM, VCC =1.2V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 4.2V, Pout = Pmax
HPM, VCC = 4.2V, Pout = Pmax
LPM, VCC ≤ 0.7V, Pout = 1.5dBm
HPM, VCC = 4.2V, Pout ≤ Pmax
NR 7
NR 7
NR 7
NR 7
NR 7
NR 8
21
16
10
24
20
27
24
PAE
16.5
550
85
%
775
170
-33
Current Consumption
EUTRA ACLR
EUTRA ACLR
EVM
mA
-40
dBc
%
HPM, VCC = 4.2V
NR 8 CA
(100+60 MHz)
-36
1.4
1.8
-33
2.1
2.1
Pout = Pout ≤ Pmax -0.5 dB
HPM, VCC = 4.2V, Pout ≤ Pmax
NR 9
HPM, VCC = 4.2V
NR 9 CA
(100+60 MHz)
EVM (Secondary)
Pout = Pout ≤ Pmax -0.5 dB
www.qorvo.com
22 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G TDD LTE
Unless otherwise stated:
Band 41 (38)
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Band 38
Band 41
2570
2496
26.5
25.5
2620
2690
Operational Frequency Range
MHz
ET Mode
Maximum Linear Output Power
(Power Class 3)
HPM, VCC = 3.8V
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
ET Mode
24.5
28
27
Maximum Linear Output Power
(Power Class 2)
HPM, VCC = 4.2V
dBm
HPM, VCC = 4.2V, VBATT=3.8V,
Temp = -20°C to +85°C
HPM, VCC = 3.8V, Power Class 3
26
26.5
23.5
26
29
28
29
28
32
33
32
33
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C, Power Class 3
HPM, VCC = 4.2V, Power Class 2
Gain
dB
HPM, VCC = 4.2V, VBATT=3.8V,
23
Temp = -20°C to +85°C, Power Class 2
LPM, VCC =1.2V, Pout=11.5dBm
LPM, VCC =0.7, Pout=1.5dBm
HPM, Pout ≤ Pmax
21
16
24
20
27
24
-33
-36
-39
5
EUTRA - ACLR
-40
-43
-52
1.7
-
UTRA - ACLR1 (B38)
UTRA - ACLR2 (B38)
EVM
HPM, Pout ≤ Pmax
dBc
HPM, Pout ≤ Pmax
All modulations
%
µs
%
Gain transient time
PAE (Power Class 3)
Quiescent Current
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.5dBm
699 – 960MHz, 40MHz QPSK 200RB
Pout ≤ Pmax with MPR
10
11.5
16.5
125
600
80
200
775
mA
Current Consumption (PC3)
LB RX Band Noise
mA
160
-185
-170
-170
-155
B39 RX Band Noise
(1880-1920MHz)
20MHz QPSK 100RB and 40MHz QPSK
200RB, both PC3 and PC2
-172
-157
dBm/Hz
B42 RX Band Noise
3400 – 3600MHz, 20MHz QPSK 100RB
-180
-140
-180
-185
-63
-165
-125
-165
-170
-48
UL20M ISM Noise
2400 – 2462MHz, 20MHz QPSK 100RB
ISM 5G Noise (except harmonics)
GPS Band Noise
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
Harmonics
3f0
-66
-51
dBm
dBc
≥4f0
-72
-57
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
23 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 41(38) RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Band 38
2570
2496
2620
2690
4.5
Operational Frequency Range
MHz
Band 41
Band 38, 41
Band 38, 41 ETC
Band 41 + 39
3.5
Insertion Loss
RX Port VSWR
5.2
dB
5.2
2
X:1
LB TX, 699 – 960MHz
42
20
15
25
-7
57
35
30
40
7
B39 TX, 1880 – 1920MHz
B1 TX, 1920 – 1980MHz
B3 TX, 1710 – 1785MHz
At 2485MHz B38 OBB
Attenuation
dB
ISM 2.4G, 2400 – 2467MHz
42
57
57
72
ISM 5G, 5150 -5850 MHz
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
www.qorvo.com
24 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
4G TDD LTE
Unless otherwise stated:
Band 41N
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Band 41N
2535
26.5
25.5
2655
MHz
ET Mode
HPM, VCC = 3.8V
Maximum Linear Output Power
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
24.5
25
HPM, VCC = 3.8V
27.5
26.5
31
32
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
22
Gain
dB
LPM, VCC =1.2V, Pout=11.5dBm
LPM, VCC =0.7V, Pout=1.5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
22
16
25
20
28
24
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-41
-42
-53
1.5
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
--
10
11
16
Quiescent Current
125
625
80
200
800
160
-168
-162
-165
-167
-155
-165
-163
-60
mA
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.7V, Pout = 1.6dBm
699 – 960MHz, 40MHz QPSK 200RB
Current Consumption
mA
LB RX Band Noise
-183
-177
-180
-182
-170
-180
-178
-75
-70
-72
B3 RX Band Noise (1805-1880MHz)
B1 RX Band Noise (2110-2170MHz)
B42 RX Band Noise
Pout ≤ Pmax with MPR,
20MHz QPSK 100RB
3400 – 3600MHz, 20MHz QPSK 100RB
dBm/Hz
UL20M ISM Noise
2400 – 2462MHz, 20MHz QPSK 100RB
ISM 5G Noise (except harmonics)
GPS Band Noise
5150 – 5850MHz, 40MHz QPSK 200RB
1574 – 1577MHz, 40MHz QPSK 200RB
2f0
Harmonics
3f0
-55
dBm
≥4f0
-52
www.qorvo.com
25 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Band 41N RX
RX Electrical Specifications
Temp = 25°C, VBATT = 3.8V, APT Mode.
Operational Frequency Range
Insertion Loss
Band 41N
2535
2655
4.7
MHz
dB
Band 41N
3.7
Band 41N ETC
5.2
RX Port VSWR
2
X:1
LB TX, 699 – 960MHz
48
48
46
35
59
63
63
61
50
74
-36
B1 TX, 1920 – 1980MHz
B3 TX, 1710 – 1785MHz
ISM 2.4G, 2400 – 2467MHz
ISM 5G, 5150 – 5850 MHz
Attenuation
dB
Cross B1 TX power to B41N RX port 1922.5 – 1977MHz, 5MHz QPSK 6RB
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss values are averaged across Low, Mid, High Frequencies.
-30
dBm/5MHz
www.qorvo.com
26 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
4G LTE HB
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
HB_TX1
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0
TX Electrical Specifications
Operational Frequency Range
Maximum Linear Output Power
High Band 30
2305
29
2315
MHz
HPM, VCC = 3.8V
dBm
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
28
28
25
HPM, VCC = 3.8V
30.5
29.5
34
35
HPM, VCC = 3.8V, VBATT=3.8V ,
Temp = -20°C to +85°C
Gain
dB
LPM, VCC =1.1V, Pout=15dBm
LPM, VCC =0.6V, Pout=5dBm
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
HPM, VCC = 3.8V, Pout ≤ Pmax
All modulations
22
16
25
20
28
24
-33
-36
-39
5
EUTRA - ACLR
UTRA - ACLR1
UTRA - ACLR2
EVM
-43
-46
-53
1.3
dBc
%
µs
%
Gain transient time
PAE
Gain transient time between PA modes
HPM, VCC = 3.8V, Pout = Pmax
HPM, VCC = 3.8V, No RF
--
10
25
30
Quiescent Current
125
700
90
200
875
180
-127
-140
-130
-142
-132
0
mA
HPM, VCC = 3.8V, Pout = Pmax
LPM, VCC = 0.6V, Pout = 5dBm
2350 – 2360MHz, HPM
Current Consumption
mA
RX Band Noise
-128
-155
-145
-157
-147
-15
-24
LB RX Band Noise
699 – 960MHz, 40MHz QPSK 200RB
1452 – 2200MHz, 40MHz QPSK 200RB
5150 – 5850MHz, 20MHz QPSK 100RB
1574 – 1577MHz, 20MHz QPSK 100RB
2f0
MB RX Band Noise
ISM 5G Noise (except harmonics)
GPS Band Noise
dBm/Hz
Harmonics
dBm
dBc
3f0
-10
Output Load VSWR 6:1, all phases angles,
Pout = Prated Closed Loop, CW Modulation,
Stability, spurious output level
-70
VCC=3.4V to 4.6V, Temp = -30°C to +85°C
www.qorvo.com
27 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
2G_HB_IN
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Electrical Specifications
Temp = 25°C, VBATT = 3.8V
Frequency Range
DCS/PCS
DCS/PCS
Pin=31dBm
1710
1990
1.2
MHz
dB
Insertion Loss
0.75
-68
PCS/DCS Harmonics, 2f0 and 3f0
-53
dBm
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Unless otherwise stated:
TRX1, TRX2, TRX3, TRX4
TRX Electrical Specifications
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Temp = 25°C, VBATT = 3.8V
Frequency Range
1427
2690
1.1
1.3
1.4
1.5
1.6
1.7
-70
-70
MHz
dB
1427 – 1559MHz
1700 – 2200MHz
2300 – 2690MHz
1427 – 1559MHz
1700 – 2000MHz
2300 – 2690MHz
Pin=26dBm
0.5
Insertion Loss TRX 1
0.6
0.7
0.8
0.8
1.0
-85
-85
Insertion Loss TRX 2 - 4
dB
Harmonic, 2f0
Harmonic, 3f0
dBm
Pin=26dBm
Note: Rx port mismatch loss may be optimized with external tuning circuits
Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Bi-Directional Coupler
CPL_OUT
Unless otherwise stated:
All unused RF ports terminated in 50Ω, Input and Output = 50Ω,
Electrical Specifications
Temp = 25°C, VBATT = 3.8V
Frequency Range
Coupling factor
Directivity
1710
2690
MHz
dB
18
16
22
20
dB
www.qorvo.com
28 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Evaluation Board Circuit Schematic and Layout
www.qorvo.com
29 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Notes:
1. Pins 22, 23 and 24 are connected to secondary MIPI harness on the EVB but there is no connection inside QM77038 module.
www.qorvo.com
30 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Evaluation Board Bill of Material
REFERENCE DESIGNATOR
DESCRIPTION
U1
QM77038 Module
C1,C2,C3,C4,C60,C62
CAP, 22uF, 10%, 10V, TANT-A
CAP, 4.7uF, 10%, 6.3V, X5R, 0805
CAP, 10000pF, 10%, 50V, X7R, 0603
CAP, 1000pF, 10%, 50V, X7R, 0402
CAP, 1uF, 10%, 50V, X7R, 0402
CAP, 1000pF, 10%, 10V, X5R, 0201
CAP, 1uF, 10%, 10V, X5R, 0201
CAP, 100pF, 5%, 25V, C0G, 0201
RES, 0 OHM, 0603
C5,C6,C7,C8,C61,C64
C9,C10,C11,C12,C63,C65
C51,C78,C79
C16
C43
C21
C23,C24,C33,C41,C42,C80,C81
R1,R24,R25,R27
P1
CONN, HDR, RT-ANG, 34-PIN, 0.100", T/H
J1,J2,J3,J4,J5,J6,J7,J8,J9,J10,J11,J12,J13,J14,J15,J16,J17,J18,J19,J20,J21
CONN, SMA, EL FLT VIPER, MAT-21-1038
CONN, SMB, ST PLUG REC, T/H
NOT POPULATED
J22,J23
All others
Pin Configuration and Description
Top View
www.qorvo.com
31 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PIN NUMBER
LABEL
DESCRIPTION
Multiple, see
description for
full list.
GND
1,2,3,6,8,10,12,13,15,17,19,21,30,32,34,38,40,42,44,46,50,53,55,56,58,60,61,62.
These pins are connected to main module ground and will be grounded on the PCB for best RF
performance.
Ground connection. The back side of the package should be connected to the ground plane through as
short of a connection as possible. PCB vias under the device are required.
Backside Pad
GND
4
TRX1
Auxiliary RF input / output to antenna switch - lower loss path. Not DC Blocked.
Auxiliary RF input / output to antenna switch. Not DC Blocked.
5
TRX2
7
B7 RX
Band 7 receive (downlink) filter output. DC less than 5V allowed.
Band 40 receive (downlink) filter output. Not DC blocked.
9
B40 RX
B41 RX
HB TX1
HB VCC2
HB VCC1
HB IN
11
14
16
18
20
22
23
24
25
26
27
28
29
31
33
35
36
37
39
41
43
45
47
48
49
51
52
54
57
59
Band 41 receive (downlink) filter output. Not DC blocked.
High band power amplifier auxiliary output from distribution switch. Not DC blocked.
DC supply for high band power amplifier output stage. Internal capacitance 130pF.
DC supply for high band power amplifier driver stage. Internal capacitance 40pF.
RF input to the high band power amplifier. Internal shunt inductor to GND.
Not connected internally, can leave open or short.
NC
NC
Not connected internally, can leave open or short.
NC
Not connected internally, can leave open or short.
VBATT
VBATT
VIO
DC supply for amplifier bias circuitry. VBATT pins 25 and 26 are connected internally.
DC supply for amplifier bias circuitry. VBATT pins 25 and 26 are connected internally.
Supply voltage for the MIPI RFFE serial interface bus.
SDATA
SCLK
Serial interface data I/O signal for programming the MIPI RFFE bus.
Serial interface clock input signal for programming the MIPI RFFE bus.
RF input to the mid band power amplifier. DC less than 1V allowed.
DC supply for mid band power amplifier driver stage. Internal capacitance 25pF.
DC supply for mid band power amplifier output stage. Internal capacitance 90pF.
Mid band power amplifier auxiliary output from distribution switch. Not DC blocked.
Mid band power amplifier auxiliary output from distribution switch. Not DC blocked.
Band 66 (including Band 1, Band 4) receive (downlink) filter output. DC less than 5V allowed.
Band 34 receive (downlink) filter output. Not DC blocked.
MB IN
MB VCC1
MB VCC2
MB TX1
MB TX2
B1,B4,B66 RX
B34 RX
B39/B2 RX
B3 RX
Band 39 selectable receive (downlink) filter output. Not DC blocked.
Band 3 receive (downlink) filter output. DC less than 5V allowed.
Not connected internally, can leave open or short.
NC
B32 RX
2G HB IN
TRX3
Band 32 receive (downlink) filter output. DC less than 5V allowed.
Input port for routing 2G HB signal through the antenna switch. Not DC blocked
Auxiliary RF input / output to antenna switch. Not DC Blocked.
TRX4
Auxiliary RF input / output to antenna switch. Not DC Blocked.
CPL OUT
ANT1
Coupler output, selectable from ANT1 or ANT2.
Antenna 1 bidirectional RF port. An inductor makes this port appear as a DC short to ground.
Antenna 2 bidirectional RF port. An inductor makes this port appear as a DC short to ground.
ANT2
www.qorvo.com
32 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Application Circuit Schematic
Notes:
1. VCC2 and VCC1 can be connected to the same source, but should be connected as close to the source as possible with separate traces
using a star routing configuration. Bypass capacitors should be placed as close to the DUT as possible.
2. VBATT pins 25 and 26 are connected together internally.
3. Decoupling capacitor values for power supplies (VCC and VBATT) are suggested based on an EVB layout, and actual number and value of
bypass capacitors needs to be evaluated per application.
www.qorvo.com
33 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
MIPI RFFE Information
Table 1 RFFE MIPI Control Logic Registers
Register
Address
Data Bits
Register Name
QORVO Bit Field Name
Default
[msb:lsb]
QORVO Description
R/W
Trigger
Support
0x00
0x00
Reg00[7]
PA_CTRL0
Reserved[7]
0b0
reserved
R/W
R/W
T0
T0
Reg00[6:3]
PA_BAND[3:0]
0b0000
PA_BAND[3:0]
0000: PA_disabled
0001: B1
0010: B3
0011: B7
0100: MB_TX1
0101: HB_TX1
0110: B39
0111: B34
1000: B40
1001: B41W
1010: B41N
1011: MB_TX2
1100: reserved
1101-1111: reserved
0x00
0x00
Reg00[2]
PA_EN[2]
0b0
PA Enable
0: PA Off
1: PA On
R/W
R/W
T0
T0
Reg00[1:0]
PA_MODE[1:0]
0b00
PA Mode
00: HPM
01: reserved
10: reserved
11: LPM
0x01
0x01
Reg01[7:4]
Reg01[3:0]
PA_CTRL1
PA_BIAS_2[3:0]
PA_BIAS_1[3:0]
0b0000
0b0000
PA Bias - power stage most significant bits
PA Bias - driver stage most significant bits
R/W
R/W
T0
T0
www.qorvo.com
34 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Register
Address
Data Bits
Register Name
ASW_CTRL
QORVO Bit Field Name
ASW2[3:0]
Default
[msb:lsb]
QORVO Description
R/W
R/W
Trigger Support
T1
0x2
Reg02[7:4]
0b0000
Antenna Switch Control for ANT2
0000: off
0001: TX_IN_2G_HB
0010: B{1|3|4|40}TX_B{1|3|4|32|40|66}RX
0011: B41NTRX (also connects
B{1|3|4|40}TX_B{1|3|4|32|40|66}RX)
0100: B7TRX (also connects
B{1|3|4|40}TX_B{1|3|4|32|40|66}RX)
0101: TRX1
note - if Ant2 and
Ant1 selection
conflict, ANT1
routing takes
effect.
0110: unused
0111: B{34|39|41W}TRX
1000: TRX4
1001: TRX2
1010: TRX3
1011: unused
1100: unused
1101-1110: reserved
1111: high_isolation
0x02
Reg02[3:0]
ASW_CTRL
ASW1[3:0]
0b0000
Antenna Switch Control for ANT1
0000: off
R/W
T1
0001: TX_IN_2G_HB
0010: B{1|3|4|40}TX_B{1|3|4|32|40|66}RX
0011: B41NTRX (also connects
B{1|3|4|40}TX_B{1|3|4|32|40|66}RX)
0100: B7TRX (also connects
B{1|3|4|40}TX_B{1|3|4|32|40|66}RX)
0101: TRX1
note - if Ant2 and
Ant1 selection
conflict, ANT1
routing takes
effect.
0110: unused
0111: B{34|39|41W}TRX
1000: TRX4
1001: TRX2
1010: TRX3
1011: unused
1100: unused
1101-1110: reserved
1111: high_isolation
0x03
Reg03[7:4]
XSW_CTRL
XSM_MB[3:0]
0b0000
Distribution Switch Control for MB
0000: off
R/W
T1
0001: B3B4TX
0010: B1TX_B2RX
0011: B34TRX
0100: B39TRX
0101: MB_TX2
0110: MB_TX1
0111: B2RX
1000: B39RX
1001: B34RX
1010: B3TX_B2RX
1011: B34RX_B39RX
1100-1111: reserved
0x03
Reg03[3:0]
XSM_HB[3:0]
0b0000
Distribution Switch Control for HB
0000: off
R/W
T1
0001: B40TX
0010: B41NTX
0011: B41WTX
0100: HB_TX1
0101: B40RX
0110: unused
0111: B41NRX
1000: B41WRX
1001: B41WRX+B40RX (multi-on)
1010: B41NRX+B40RX (multi-on)
1011-1111: reserved
www.qorvo.com
35 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Register
Address
Data Bits
Register Name
CPL_CTRL
QORVO Bit Field Name
Default
[msb:lsb]
QORVO Description
reserved
R/W
Trigger Support
0x04
0x04
Reg04[7:3]
Reg04[2:0]
Reserved[4:0]
CPL[2:0]
0b0_0000
0b000
R/W
R/W
T1
T1
Coupler Setting when Reg05 is 0
000: off
001: Forward ANT1
010: Reverse ANT1
011: Forward ANT2
100: Reverse ANT2
101-111: reserved
Coupler Setting when Reg05 is 1
000: off
001: Forward ANT2
010: Reverse ANT2
011: Forward ANT1
100: Reverse ANT1
101-111: reserved
0x05
0x05
0x05
Reg05[7:2]
Reg05[1]
Reg05[0]
ANT_CPL_CTRL
ANT_CPL_CTRL
ANT_CPL_CTRL
Reserved[5:0]
0b00_0000
0b0
reserved
reserved
R/W
R/W
R/W
T1
T1
T1
CPL_INDEP[1]
ANT_CPL_SWAP[0]
0b0
Antenna and coupler control swapping
0: default (Ant2 controlled by Reg2[7:4],
Ant1 controlled by Reg2[3:0],
1: swapped (Ant1 controlled by Reg2[7:4],
Ant2 controlled by Reg2[3:0]
0x0B
0x0B
Reg11[7]
PACS_CTRL
Reserved[7]
0b0
reserved
R/W
R/W
T0
T0
Reg11[6:4]
ASW_PACS[2:0]
0b000
ASW PACS setting
000 = 0.00 pF added
001 = 0.27 pF added
010 = 0.55 pF added
011 = 0.82 pF added
100 = 1.10 pF added
101 = 1.37 pF added
110 = 1.65 pF added
111 = 1.92 pF added
0x0B
0x0B
Reg11[3:2]
Reg11[1:0]
HB_XSW_PACS[1:0]
MB_XSW_PACS[1:0]
0b00
0b00
HB XSW PACS setting
00=0 pF added
01=0.35 pF added
10=0.65 pF added
11=1.00 pF added
R/W
R/W
T0
T0
MB XSW PACS setting
00=0.00 pF added
01=0.35 pF added
10=0.65 pF added
11=1.00 pF added
0x1A
0x1A
Reg26[7]
Reg26[6]
RFFE_STATUS
SW_RESET[7]
0b0
0b0
0: Normal operation
1: Software reset (reset of all configurable
registers to default values, except for USID)
R/W
R/W
NO
NO
CMD_FRAME_P_ERR[6]
Command sequence received with parity error
– discard command.
0x1A
0x1A
0x1A
0x1A
0x1A
Reg26[5]
Reg26[4]
Reg26[3]
Reg26[2]
Reg26[1]
CMD_LEN_ERR[5]
0b0
0b0
0b0
0b0
0b0
Command length error
R/W
R/W
R/W
R/W
R/W
NO
NO
NO
NO
NO
ADDR_FRAME_P_ERR[4]
DATA_FRAME_P_ERR[3]
READ_UNUSED_REG[2]
WRITE_UNUSED_REG[1]
Address frame parity error
Data frame with parity error
Read command to an invalid address
Write command to an invalid address
www.qorvo.com
36 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Register
Address
Data Bits
Reg26[0]
Register Name
QORVO Bit Field Name
BID_GID_ERR[0]
Default
[msb:lsb]
QORVO Description
R/W
R/W
Trigger Support
NO
0x1A
0b0
Read command with a Broadcast_ID or
GROUP_ID
0x1B
0x1B
0x1C
Reg27[7:4]
Reg27[3:0]
Reg28[7]
GROUP_ID
PM_TRIG
GSID0[3:0]
0b0000
0b0000
0b1
Group slave ID 0
Group slave ID 1
R/W
R/W
R/W
NO
NO
NO
GSID1[3:0]
PWR_MODE[7]
0: Normal operation (ACTIVE)
1: Secondary mode (LOW POWER)
0x1C
Reg28[6]
PWR_STATE[6]
0b0
0: Normal operation
1: initialization state
R/W
NO
note - this bit always reads 0. Writing a 1 to
this bit forces a reset.
0x1C
Reg28[5:3]
TRIGGERMASK[2:0]
0b000
Setting these bits to '1' will cause the
corresponding triggers to be masked
(disabled), and RFFE writes to corresponding
registers will change configuration immediately
(no trigger command necessary).
TriggerMask[2] = TriggerMask_2,
TriggerMask[1] =
R/W
NO
TriggerMask_1,&TriggerMask[0] =
TriggerMask_0
Note: Qorvo does not allow for changing the
trigger mask and sending triggers within the
same RFFE write.
0x1C
Reg28[2:0]
TRIGGER[2:0]
0b000
Setting these bits to '1' will cause the registers
associated with that trigger to be loaded with
the contents of its corresponding shadow
register. Trigger[2] = Trigger_2, Trigger[1] =
Trigger_1, and Trigger[0] = Trigger_0
Note: Qorvo does not allow for changing the
trigger mask and sending triggers within the
same RFFE write.
R/W
NO
0x1D
0x1E
Reg29[7:0]
Reg30[7:0]
PRODUCT_ID
MAN_US_ID
PRODUCT_ID[7:0]
0b0001_0000
0b1100_0110
This is a read-only register. However, during
the programming of the USID a write command
sequence is performed on this register, even
though the write does not change its value.
R/W
R/W
NO
NO
MANUFACTURER_ID_LSB[7:0]
This is a read-only register. However, during
the programming of the USID, a write
command sequence is performed on this
register, even though the write does not
change its value. Note: This is the lower 8
least significant bits of the RFFE's
MANUFACTURER_ID (i.e.
MANUFACTURER_ID[7:0] =
MANUFACTURER_ID_LSB[7:0]
0x1F
Reg31[7:4]
MAN_US_ID
MANUFACTURER_ID_MSB[3:0]
0b0011
These bits are read-only. However, during the
programming of the USID, a write command
sequence is performed on this register even
though the write does not change its value.
Note: This is the 4 most significant bits of the
RFFE's MANUFACTURER_ID (i.e.
R/W
NO
MANUFACTURER_ID[11:8] =
MANUFACTURER_ID_MSB[3:0]
0x1F
0x20
Reg31[3:0]
Reg32[7:0]
USID[3:0]
0b1110
Programmable USID. Performing a write to this
register using the described programming
sequences will program the USID in devices
supporting this feature. These bits store the
USID of the device (customer specified).
R/W
R/W
NO
EXT_PRODUCT_ID
EXT_PRODUCT_ID[7:0]
0b0000_0000
This is a read-only register. However, during
the programming of the USID a write command
NO
www.qorvo.com
37 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Register
Address
Data Bits
Register Name
REVISION_ID
QORVO Bit Field Name
REVISION_ID[7:0]
Default
[msb:lsb]
QORVO Description
R/W
Trigger Support
sequence is performed on this register, even
though the write does not change its value.
0x21
0x22
0x22
0x23
Reg33[7:0]
0b0000_0000
0b0000
0b0000
0b0
This is an RFFE2 register to contain information
about the revision of this module. The intent
here is to use this as a type of scratch register -
- to contain various information or
serialization.
R/W
NO
Reg34[7:4]
Reg34[3:0]
Reg35[7]
GROUP_ID2
GSID0_2[3:0]
GSID1_2[3:0]
SW_RESET_2[7]
Group slave ID 0
R/W
R/W
R/W
NO
NO
NO
There is only 1 register for GSID0&GSID1,
but this register can be accessed from either
Reg27 or Reg34. This means that write to
Reg34 will reflect in Reg27 also, and vice versa
Group slave ID 1
There is only 1 register for GSID0;GSID1, but
this register can be accessed from either Reg27
or Reg34. This means that write to Reg34 will
reflect in Reg27 also, and vice versa
UDR_RST
0: Normal operation
(RFFE_STATUS2)
1: Software reset (reset of all configurable
registers to default values, except for USID)
There is only 1 register for RFFE_STATUS, but
this register can be accessed from either Reg26
or Reg35. This means that write to Reg35 will
reflect in Reg27 also, and vice versa
0x23
0x24
0x24
Reg35[6:0]
Reg36[7]
Reg36[6]
Reserved[6:0]
0b000_0000
0b0
Reserved
Reserved
R/W
R/W
R/W
NO
NO
NO
ERR_SUM
(RFFE_STATUS3)
Reserved[7]
CMD_FRAME_P_ERR_2[6]
0b0
Command sequence received with parity error
– discard command.
0x24
0x24
0x24
0x24
0x24
0x24
Reg36[5]
Reg36[4]
Reg36[3]
Reg36[2]
Reg36[1]
Reg36[0]
CMD_LEN_ERR_2[5]
0b0
0b0
0b0
0b0
0b0
0b0
Command length error
R/W
R/W
R/W
R/W
R/W
R/W
NO
NO
NO
NO
NO
NO
ADDR_FRAME_P_ERR_2[4]
DATA_FRAME_P_ERR_2[3]
READ_UNUSED_REG_2[2]
WRITE_UNUSED_REG_2[1]
BID_GID_ERR_2[0]
Address frame parity error
Data frame with parity error
Read command to an invalid address
Write command to an invalid address
Read command with a Broadcast_ID or
GROUP_ID
0x2B
0x2B
Reg43[7:4]
Reg43[3:0]
BUS_LOAD
Reserved[3:0]
0b0000
0b0100
Reserved
R/W
R/W
No
No
BUS_LOAD[3:0]
SDATA Driver strength in Readback Mode
0x0: 10pf
0x3: 40pf
0x6: 80pf
0x9: 140pf 0xA: 160pf
0xC: 200pf 0xD: 250pf
0xE-0xF: reserved
0x1: 20pf
0x4: 50pf
0x7: 100pf
0x2: 30pf
0x5: 60pf
0x8: 120pf
0xB: 180pf
0x2C
Reg44[7:0]
TEST_PATTERN
Test Pattern[7:0]
0b1101_0010
A read of this register returns the test pattern
R
No
www.qorvo.com
38 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Turn On Information
CONDITIONS
PARAMETER
MIN.
TYP.
MAX.
UNITS
Initial: PM_TRIG[PWR_MODE] = 1 (LOW POWER). All
registers are configured for measured path and triggered.
Stimulus: PM_TRIG[PWR_MODE] = 0 (ACTIVE).
Response: Output power within 1dB of final Pout.
Turn On Time, "Cold Start"
(10,11)
-
7.5
-
µs
Initial: Antenna switch is Off
Turn On Time,
-
-
2.3
2
-
-
µs
µs
Stimulus: Antenna switch is configured for measured path
Response: Output power within 1dB of final
Initial: Antenna switch is configured for measured path
Antenna Switch(10,11)
Turn Off Time,
Antenna Switch(10,11)
Stimulus: Antenna switch is configured Off
Response: Output power decrease of 20dB
Initial: Antenna switch is configured for first port
Port to Port Switching Time,
Antenna Switch(10,11)
-
2.3
-
µs
Stimulus: Antenna switch is configured for second port
Response: Output power within 1dB of final
Initial: Tx path configured On
(all register values except PA_EN)
Turn On Time,
-
-
3.6
0.5
-
-
µs
µs
MB or HB Amplifier(10)
Stimulus: PA_EN = 0 to 1
Response: Output power within 1dB of final
Initial: Tx path configured On
Turn Off Time,
MB or HB Amplifier(10)
Stimulus: PA_EN = 1 to 0
Response: Output power decrease of 20dB
Initial: MB or HB amplifier and switch path configured for
first power mode
-
0.5
-
µs
Gain Switching Time(10)
Stimulus: MB or HB amplifier configured for second power
mode (PA_MODE and/or bias register change)
Response: Output power within 1dB of final
10. Initial conditions are applied to the device under test. An RF input signal with constant average power (-20dBm for PA inputs and
0dBm for others) is applied at the appropriate input port. Output power is monitored at the appropriate output port. The Stimulus
condition is applied. Time between the Stimulus and the Response condition is measured. When the Stimulus is a MIPI RFFE
register write, the reference is from the end of the RFFE write, defined by the SCLK transition “high” at Bus Park. For accurate
measurements when multiple registers are included in the stimulus, triggered operation is used and the reference is the end of the
RFFE write that triggers the registers.
11. Applies to all mid band or high band PA paths and Tx or Rx paths through the ANT port(s).
www.qorvo.com
39 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Mechanical Information
Package Marking and Dimensions
Marking: Part number – QM77038
www.qorvo.com
40 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
PCB Design Guidelines
PCB Metal Land and Solder Mask Pattern
Notes:
1. All dimensions are in microns. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
www.qorvo.com
41 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
Handling Precautions
PARAMETER
RATING
STANDARD
Class 1C – all pins
except 7, 39, 45.
ESD – Human Body Model (HBM)
ESDA/JEDEC JS-001-2012
Class 1B –
pins 7, 39, 45
ESD – Charged Device Model (CDM)
MSL – Moisture Sensitivity Level
Class C3
Level 3
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
www.qorvo.com
42 of 43
Data Sheet 20200415 | Subject to change without notice
QM77038
Linear Multi-Mode Mid and High Band S-PAD
REVISION HISTORY
Revision
DESCRIPTION
Added Limits (Rx Noise)
09/26/2019
01/13/2020
Added IL ETC and Limits, B39 2fo limit changed from -60 to -40 dBm max, B39 2.4G Rejection Limit
changed from 45 to 40 dB min, B32 5G BW changed from 5150 to 4905, limit changed from 57 to
47 dB min.
01/16/2020
03/27/2020
04/02/2020
04/15/2020
Increase n3 max gain window from 33 to 33.4 dB and B7 max gain window from 32 to 33.8dB.
Added n40
Changed n1 Modulation from 20 to 50MHz, Added new band n40, Added CA100+60 MHz to n41.
Added limits for 5G Changes, n1,n40,n41.
www.qorvo.com
43 of 43
Data Sheet 20200415 | Subject to change without notice
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明