QPA0363ASR [QORVO]

DC â 5000 MHz Cascadable SiGe HBT Amplifier;


型号：	QPA0363ASR
厂家：	Qorvo
描述：	DC â 5000 MHz Cascadable SiGe HBT Amplifier 射频微波
文件：	总7页 (文件大小：880K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Product Overview

The QPA0363A is a high performance SiGe HBT MMIC

amplifier. A Darlington configuration provides high FT and

excellent thermal performance. The heterojunction

increases breakdown voltage and minimizes leakage

current between junctions. Cancellation of emitter junction

non-linearities results in higher suppression of

intermodulation products.

6 Lead SOT-363 Package

The QPA0363A may be operated from a variety of supply

voltages by using a voltage dropping resistor. Two DC-

blocking capacitors, bypass capacitors and an optional RF

choke complete the circuit required for operation of this

internally matched 50 ohm device.

Key Features

 DC to 5000ꢀMHz Operation

 Single Positive Voltage Supply

 Low Current Draw: 11ꢀmA at +5ꢀV Supply

 Output IP3: +20ꢀdBm typical at 1950ꢀMHz

 Noise Figure: 2.85ꢀdB Typical at 1950ꢀMHz

 Robust 1000ꢀV Class 1C HBM ESD Rating

 Lead-free/RoHS-compliant SOT-363 Package

The QPA0363A is assembled in an industry standard SOT-

363 package that is lead-free and RoHS-compliant.

Functional Block Diagram

Applications

 Cellular, PCS, GSM, UMTS

 PA Driver Amplifier

 IF/RF Buffer Amplifier

 Wireless Data, Satellite

Top View

Ordering Information

Part No.

Description

QPA0363ASQ

QPA0363ASR

QPA0363ATR7

25 Piece Sample Bag

100 Pieces on 7” Reel

3000 pieces on a 7” reel

QPA0363APCK401 850ꢀMHz, EVB with 5 Piece Sample Bag

Data Sheet Nov. 1, 2016 | Subject to change without notice

1 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Absolute Maximum Ratings

Recommended Operating Conditions

Parameter

Rating

−55 to +150ꢁ°C

+4 V

Parameter

Min

Typ

Max Units

Storage Temp

Operating Temperature

Junction Temperature (T_J)

−40

+105

+125

°C

Device Voltage (V_D)

Device Current (I_D)

RF Input Power (Z_L= 50ꢀΩ)

Electrical specifications are measured at specified test conditions.

Specifications are not guaranteed over all recommended operating

conditions.

22 mA

−5ꢀdBm

Exceeding any one or a combination of the Absolute Maximum Rating

conditions may cause permanent damage to the device. Extended

application of Absolute Maximum Rating conditions to the device may

reduce device reliability.

Bias Conditions should also satisfy the following expression:

I_Dx V_D< (T_JUNCTION-T_LEAD) / R_TH

Electrical Specifications

Parameter

Conditions

Min

Typ

19.3

16.9

15.7

+1.0

+1.7

+16.3

+17.5

+20.0

+19.0

+16.5

17.5

21.2

20.8

2.60

2.85

+2.5

Max

Units

850ꢀMHz

1950ꢀMHz

2400ꢀMHz

850ꢀMHz

1950ꢀMHz

2400ꢀMHz

500ꢀMHz

850ꢀMHz

1950ꢀMHz

2400ꢀMHz

3500ꢀMHz

1950ꢀMHz

850ꢀMHz

1950ꢀMHz

Small Signal Gain

Output Power at 1dB Compression

Output Third Intercept Point

dBm

Input Return Loss, |S11|

Output Return Loss, |S22|

Reverse Isolation, |S12|

Noise Figure

Device Operating Voltage

Device Operating Current

Thermal Resistance

Notes:

123

°C/W

1. Test conditions unless otherwise noted: V_S=+5ꢀV, R_BIAS= 220ꢀΩ I_D=11ꢀmA Typ., OIP3 Tone Spacing=1ꢀMHz, P_OUTper tone = -12ꢀdBm, 50ꢀΩ

system, Temp.ꢀ=ꢀ+25ꢀ°C.

Data Sheet Nov. 1, 2016 | Subject to change without notice

2 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Performance Plotsꢀ –ꢀ 850 MHz Application Circuit

Test conditions unless otherwise noted: V_S= +5.0 V, I_D= 11ꢀmA

Data Sheet Nov. 1, 2016 | Subject to change without notice

3 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Evaluation Board and Schematicꢀ –ꢀ 850 MHz Application Circuit

Bill of Materialꢀ –ꢀ 850 MHz Application Circuit

Reference Value Description

Manufacturer

Qorvo

Part Number

n/a

PCB

QPAXX63X-410(A)

QPA0363A

n/a

HBT MMIC Amplifier

Qorvo

1ꢀuF

CAP, 10%, 25V, X7R, 1206

CAP, 10%, 50V, X7R, 0402

CAP, 5%, 50V, C0G, 0402

RES, 220 Ω, 5%, 1/2W, 1210

IND, 5%, M/L, 0603

Murata Electronics

GRM31MR71E105KA01L

GRM155R71H102KA01D

GRM1555C1H680JA01D

GRM1555C1H101JA01D

1000 pF

68 pF

100 pF

220 Ω

33 nH

n/a

C4, C5

Panasonic Industrial Devices ERJ-14YJ221U

Murata Electronics

Amphenol RF Asia Corp

Samtec Inc

LL1608-FSL33NJ

901-10426

J1, J2

CONN, SMA, EL, FLT, 0.068" SPE-000318

CONN, HDR, ST, 1x2, 0.100", Hi-temp, T/H

n/a

HTSW-102-07-G-S

Component Values for Specific Frequencies

Reference Designator

500 MHz

220 pF

100 pF

68 nH

850 MHz

100 pF

68 pF

1950 MHz

68 pF

2400 MHz

3500 MHz

39 pF

C4, C5

56 pF

22 pF

18 nH

22 pF

15 pF

33 nH

22 nH

15 nH

Bias Resistor Values for Specific Supply Voltages

Reference Designator

R1 ( Rbias) ^(1,ꢀ2)

Notes:

V_S=+5 V

V_S=+7.5 V

V_S=+9 V

620 Ω

V_S=+12 V

220 Ω

470 Ω

910 Ω

1. Bias resistor improves current stability over temperature

2. Bias Resistance = R_BIAS+ R_LDC= ( V_S-V_D) / I_D

Data Sheet Nov. 1, 2016 | Subject to change without notice

4 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Pin Configuration and Description

Top View

Pad No.

Label

Description

Connection to ground. Use via holes in PCB for best performance to reduce lead inductance as close to

ground leads as possible

1, 2, 4, 5

GND

RF Input Pin. DC voltage is present on this pin therefore this pin requires the use of an external DC

blocking capacitor chosen for the frequency of operation.

RF_IN

RF Output and Bias Pin. DC voltage is present on this pin therefore this pin requires the use of an

external DC blocking capacitor chosen for the frequency of operation.

RF_OUT/Bias

Package Marking

XXXX is an Alpha-numeric trace code.

Data Sheet Nov. 1, 2016 | Subject to change without notice

5 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Package Dimensions

Notes:

1. All dimensions are in inches (millimeters). Angles are in degrees.

2. Dimension and tolerance formats conform to ASME Y14.5-2009.

PCB Mounting Pattern

Data Sheet Nov. 1, 2016 | Subject to change without notice

6 of 7

www.qorvo.com

QPA0363A

DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier

Handling Precautions

Parameter

Rating

Standard

ESDꢀ–ꢀHuman Body Model (HBM)

Class 1C

ESDAꢁ/ꢁJEDEC JS-001-2014

ESDA / JEDEC JS-002-2014

IPC/JEDEC J-STD-020

Caution!

ESD-Sensitive Device

ESDꢀ–ꢀCharged Device Model (CDM) Class C3

MSLꢀ–ꢀMoisture Sensitivity Level

Level 1

Solderability

Compatible with lead-free (260°C max. reflow temp.) soldering process.

Solder profiles available upon request.

Contact plating: Matte Sn

RoHS Compliance

This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and

Electronic Equipment) as amended by Directive 2015/863/EU.

This product also has the following attributes:

 Lead Free

 Halogen Free (Chlorine, Bromine)

 Antimony Free

 TBBP-A (C₁₅H₁₂Br₄0₂) Free

 PFOS Free

 SVHC Free

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations:

Web: www.qorvo.com

Tel: 1-844-890-8163

Email: customer.support@qorvo.com

For technical questions and application information: Email: sjcapplications.engineering@qorvo.com

Important Notice

The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained

herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained

herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for

Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any

patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by

such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED

HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER

EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,

life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal

injury or death.

Data Sheet Nov. 1, 2016 | Subject to change without notice

7 of 7

www.qorvo.com

相关型号：