QPA2626 [QORVO]

17 – 22 GHz GaAs Low Noise Amplifier;
QPA2626
型号: QPA2626
厂家: Qorvo    Qorvo
描述:

17 – 22 GHz GaAs Low Noise Amplifier

文件: 总15页 (文件大小:1197K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Product Description  
Qorvo’s QPA2626 is a packaged, high-performance, low  
noise amplifier fabricated on Qorvo’s production 90nm  
pHEMT (QPHT09) process. Covering 17 22 GHz, the  
QPA2626 provides 25 dB small signal gain and P1dB of  
20 dBm, while supporting a noise figure of 1.3 dB and IM3  
levels of −55 dBc (at Pout=0 dBm/tone).  
Packaged in a small 4 mm x 4 mm plastic overmold QFN,  
the QPA2626 is matched to 50 ohms with integrated DC  
blocking caps on both I/O ports for easy handling and  
simple system integration.  
The QPA2626 high performance and ease of handling  
makes it ideal for satellite and point to point  
communication systems.  
Functional Block Diagram  
Product Features  
Frequency Range: 17 22 GHz  
Noise Figure: 1.3 dB  
Small Signal Gain: 25 dB  
P1dB: 20 dBm  
IM3: −55 dBc (@ Pout=0 dBm/tone)  
Bias: VD = 3.5 V, IDQ = 90 mA, VG = −0.46 V  
Plastic Overmolded Package  
Package Dimensions: 4.0 x 4.0 x 0.85 mm  
Performance is typical across frequency. Please  
reference electrical specification table and data plots for  
more details.  
Ordering Information  
Part  
Description  
QPA2626  
17 22 GHz GaAs Low Noise Amp  
Applications  
QPA2626SR  
QPA2626TR7  
Tape and Reel, Qty 100  
Tape and Reel, Qty 750  
Satellite Communications  
Point- to - Point Communications  
QPA2626EVB1 QPA2626 Evaluation Board, Qty 1  
- 1 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Absolute Maximum Ratings  
Units  
Parameter  
Drain Voltage (VD)  
Value  
4.5  
V
mA  
V
Drain Current (ID1/ID2/ID3)  
Gate Voltage Range  
45/45/160  
-1.3 to 0  
5.0/5.0/6.6  
20  
mA  
dBm  
°C  
Gate Current (IG1/IG2/IG3 at 125 °C)  
RF Input Power (50 Ω, 85 °C)  
Channel Temperature, TCH  
Mounting Temperature (30 seconds)  
Storage Temperature  
175  
°C  
260  
°C  
−55 to 150  
Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and  
functional operation of the device at these conditions is not implied.  
Recommended Operating Conditions  
Units  
Parameter  
Drain Voltage  
Value  
3.5  
V
mA  
mA  
V
Drain Current (quiescent, IDQ  
)
90  
Drain Current (ID, Low noise / PSAT  
Gate Voltage (typical)  
)
90 / 175  
−0.46  
−40 to 85  
ꢀ°C  
Operating Temperature Range  
Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating  
conditions.  
Electrical Specifications  
Test conditions, unless otherwise noted: 25 °C, VD = 3.5 V, IDQ = 90 mA. Data de-embedded to device reference plane.  
Parameter  
Frequency  
Min  
17  
Typical  
Max  
22  
Units  
GHz  
dB  
Small Signal Gain  
22  
25  
1.3  
Noise Figure  
dB  
1-dB Compression Point  
Input Return Loss  
20  
dBm  
dB  
12  
Output Return Loss  
17  
dB  
3RD Order Intermodulation level (Pout=0 dBm/tone)  
Output TOI (Pout=0 dBm/tone)  
Gain Temperature Coefficient  
−55  
28  
dBc  
dBm  
dBm/°C  
−0.013  
- 2 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots Small Signal  
Test conditions unless otherwise noted: VD = +3.5V, IDQ = 90 mA, Temp. = +25°C  
Input Return Loss vs Temperature  
Gain vs Temperature  
0
-5  
29  
27  
25  
23  
21  
19  
17  
15  
-10  
-15  
-20  
-25  
-30  
- 40 C  
+ 25 C  
+ 85 C  
- 40 C  
+ 25 C  
+ 85 C  
23  
15  
17  
19  
21  
23  
25  
15  
17  
19  
21  
25  
Freq (GHz)  
Freq (GHz)  
Output Return Loss vs Temperature  
Reverse Isolation vs Temperature  
0
-30  
-40  
-50  
-60  
-70  
-80  
-5  
-10  
-15  
-20  
-25  
-30  
- 40 C  
+ 25 C  
+ 85 C  
- 40 C  
+ 25 C  
+ 85 C  
15  
17  
19  
21  
23  
25  
15  
17  
19  
21  
23  
25  
Freq (GHz)  
Freq (GHz)  
- 3 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots Small Signal  
Test conditions unless otherwise noted: VD = +3.5V, IDQ = 90 mA, Temp. = +25°C  
Gain vs Current  
Gain vs Voltage  
29  
27  
29  
27  
20 mA  
90 mA  
30 mA  
50 mA  
130 mA  
70 mA  
110 mA  
25  
23  
21  
19  
17  
15  
25  
23  
21  
19  
17  
15  
2.0 V  
17  
3.0 V  
19  
3.5 V  
21  
4.0 V  
23  
15  
15  
15  
25  
25  
25  
15  
15  
15  
17  
19  
21  
23  
25  
25  
25  
Freq (GHz)  
Freq (GHz)  
Input Return Loss vs Voltage  
Input Return Loss vs Current  
0
-5  
0
-5  
-10  
-15  
-20  
-25  
-30  
-10  
-15  
-20  
-25  
-30  
20 mA  
90 mA  
30 mA  
50 mA  
70 mA  
2.0 V  
17  
3.0 V  
19  
3.5 V  
21  
4.0 V  
23  
110 mA  
130 mA  
17  
19  
21  
23  
Freq (GHz)  
Freq (GHz)  
Output Return Loss vs Voltage  
Output Return Loss vs Current  
0
-5  
0
-5  
20 mA  
90 mA  
30 mA  
110 mA  
50 mA  
130 mA  
70 mA  
2.0 V  
3.0 V  
3.5 V  
4.0 V  
-10  
-15  
-20  
-25  
-30  
-10  
-15  
-20  
-25  
-30  
17  
19  
21  
23  
17  
19  
21  
23  
Freq (GHz)  
Freq (GHz)  
- 4 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots Small Signal  
Test conditions unless otherwise noted: VD = +3.5V, IDQ = 90 mA, Temp. = +25°C  
NF vs Temperature  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
- 40 C  
19  
+ 25 C  
+ 85 C  
0.0  
15  
17  
21  
23  
25  
Freq (GHz)  
NF vs Voltage  
NF vs Current  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
0.0  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
20 mA  
90 mA  
30 mA  
50 mA  
70 mA  
2.0 V  
3.0 V  
3.5 V  
4.0 V  
110 mA  
130 mA  
0.0  
25  
15  
17  
19  
21  
23  
25  
15  
17  
19  
Freq (GHz)  
21  
23  
Freq (GHz)  
- 5 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots: Large Signal  
Test conditions unless otherwise noted: Temp. = 25 °C, VD = 3.5 V, IDQ = 90 mA. Data de-embedded to device reference plane.  
P1dB vs. Freq. vs. Temp.  
Psat vs. Freq. vs. Temp.  
25  
24  
23  
22  
21  
20  
19  
18  
17  
16  
15  
25  
24  
23  
22  
21  
20  
19  
18  
17  
16  
15  
-40 C  
19  
+25 C  
20  
+85 C  
21  
-40 C  
19  
+25 C  
20  
+85 C  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
Output Power vs. Input Power vs. Freq.  
PAE vs. Freq. vs. Temp.  
60  
55  
50  
45  
40  
35  
30  
25  
20  
15  
10  
50  
26  
24  
22  
20  
18  
16  
14  
12  
10  
8
+25 C P1dB  
+85 C P1dB  
−40 C P1dB  
45  
40  
35  
30  
25  
20  
15  
10  
5
+25 C Psat  
+85 C Psat  
−40 C Psat  
6
18 GHz  
20 GHz  
22 GHz  
0
4
17  
18  
19  
20  
21  
22  
23  
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2  
Input Power (dBm)  
0
2
4
Frequency (GHz)  
Power Gain vs. Input Power vs. Freq.  
Drain Current vs. Input Power vs. Freq.  
28  
26  
24  
22  
20  
18  
16  
14  
180  
170  
160  
150  
140  
130  
120  
110  
100  
90  
18 GHz  
20 GHz  
22 GHz  
18 GHz  
20 GHz  
22 GHz  
80  
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2  
Input Power (dBm)  
0
2
4
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2  
Input Power (dBm)  
0
2
4
- 6 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots: Linearity  
Test conditions unless otherwise noted: Temp. = 25 °C, VD = 3.5 V, IDQ = 90 mA. Data de-embedded to device reference plane.  
IM3 vs. Frequency vs. Temperature  
IM3 vs. Frequency vs. VD  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
Df =10 MHz, Pout/Tone = 0 dBm  
IDQ = 90 mA, Df =10 MHz, Pout/Tone = 0 dBm  
-40 C  
19  
+25 C  
20  
+85 C  
21  
3.0 V  
19  
3.5 V  
20  
4.0 V  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
IM3 vs. Frequency vs. Temperature  
IM3 vs. Frequency vs. IDQ  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
Df =10 MHz, Pout/Tone = 5 dBm  
VD = 3.5 V, Df =10 MHz, Pout/Tone = 0 dBm  
-40 C  
19  
+25 C  
20  
+85 C  
21  
70 mA  
19  
90 mA  
20  
110 mA  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
IM3 vs. Frequency vs. Temperature  
OTOI vs. Frequency vs. Temperature  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
40  
35  
30  
25  
20  
15  
10  
Df =10 MHz, Pout/Tone = 10 dBm  
Df =10 MHz, Pout/Tone = 0 dBm  
-40 C  
19  
+25 C  
20  
+85 C  
21  
-40 C  
19  
+25 C  
20  
+85 C  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
- 7 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Performance Plots: Linearity  
Test conditions unless otherwise noted: Temp. = 25 °C, VD = 3.5 V, IDQ = 90 mA. Data de-embedded to device reference plane.  
IM5 vs. Frequency vs. Temperature  
Df =10 MHz, Pout/Tone = 0 dBm  
IM5 vs. Frequency vs. VD  
IDQ = 90 mA, Df =10 MHz, Pout/Tone = 0 dBm  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
-40 C  
19  
+25 C  
20  
+85 C  
21  
3.0 V  
19  
3.5 V  
20  
4.0 V  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
IM5 vs. Frequency vs. Temperature  
Df =10 MHz, Pout/Tone = 5 dBm  
IM5 vs. Frequency vs. IDQ  
VD = 3.5 V, Df =10 MHz, Pout/Tone = 0 dBm  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
70 mA  
19  
90 mA  
20  
110 mA  
21  
-40 C  
19  
+25 C  
20  
+85 C  
21  
17  
18  
22  
23  
17  
18  
22  
23  
Frequency (GHz)  
Frequency (GHz)  
IM5 vs. Frequency vs. Temperature  
Df =10 MHz, Pout/Tone = 10 dBm  
0
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
-100  
-40 C  
19  
+25 C  
20  
+85 C  
21  
17  
18  
22  
23  
Frequency (GHz)  
- 8 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Applications Circuit  
Bias Down Procedure  
1. Turn off RF signal  
Bias Up Procedure  
1. Set ID limit to 200 mA, IG limit to 10 mA  
2. Set VG to −1.3 V  
2. Reduce VG to 1.3 V. Ensure IDQ ~ 0mA  
3. Set VD to 0V  
3. Set VD +3.5 V  
4. Adjust VG more positive until IDQ = 90mA  
(VG ~ −0.46 V Typical)  
5. Apply RF signal  
4. Turn off VD supply  
5. Turn off VG supply  
- 9 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Evaluation Board and Mounting Detail  
RF Layer is 0.008” thick Rogers Corp. RO4003C (εr = 3.35). Metal layers are 0.5 oz. copper. The microstrip line at the  
connector interface is optimized for the Southwest Microwave end launch connector 1492-04A-5.  
All data de-embedded to the device reference plane (shown).  
Ref. Des. Component  
Value  
Manuf. Part Number  
C3, C12  
C6, C15  
C9, C18  
Surface Mount Cap. CAP 0.01UF +/-10% 50V 0402 X7R ROHS  
Surface Mount Cap. CAP 1.0UF +/-10% 16V 0603 X7R ROHS  
Surface Mount Cap. CAP CER 10UF 10V X7R 10% 0805 TDK ROHS  
Various  
Various  
Various  
- 10 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Mechanical Drawing & Pad Description  
Dimensions in mm, package is mold encapsulated with NiPdAu plated leads  
Part Marking: 2626: Part Number; YY = Part Assembly Year; WW = Part Assembly Week; MXXX = Batch ID  
Pin Number  
1, 3, 9, 11, 17 (slug)  
2
Label  
GND  
RF Input  
VG1  
Description  
GROUND  
Matched to 50 ohms, DC blocked  
4
Gate Voltage; bias network is required (VG can be tied together at PCB)  
Gate Voltage; bias network is required (VG can be tied together at PCB)  
Gate Voltage; bias network is required (VG can be tied together at PCB)  
Matched to 50 ohms, DC blocked  
6
VG2  
8
VG3  
10  
RF Output  
VD3  
12  
Drain Voltage; bias network is required (VD can be tied together at PCB)  
Drain Voltage; bias network is required (VD can be tied together at PCB)  
Drain Voltage; bias network is required (VD can be tied together at PCB)  
No internal connection. Recommend to GND at the PCB level  
14  
VD2  
16  
VD1  
5, 7, 13, 15  
N/C  
- 11 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Thermal and Reliability Information  
Parameter  
Test Conditions  
Value  
65.1  
Units  
°C/W  
°C  
Thermal Resistance (θJC) (1)  
Channel Temperature (TCH)  
Median Lifetime (TM)  
Tbase = 85°C, VD = 3.5 V, IDQ = 90 mA  
Quiescent/Small Signal operation  
PDISS = 0.315 W  
105.5  
1.236E08  
Hrs  
Notes:  
1. Thermal resistance is measured to back of the package.  
Median Lifetime  
Test Conditions: VD = 4 V  
Failure Criteria = 10% reduction in ID_MAX  
Median Lifetime vs. Channel Temperature  
1E+13  
1E+12  
1E+11  
1E+10  
1E+09  
1E+08  
1E+07  
1E+06  
1E+05  
1E+04  
FET17  
25  
50  
75  
100  
125  
150  
175  
200  
Channel Temperature, TCH (°C)  
- 12 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Solderability  
1. Compatible with the latest version of J-STD-020, Lead-free solder, peak reflow temperature: 260 °C.  
Recommended Soldering Temperature Profile  
- 13 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Tape and Reel Information  
Standard T/R size = 100 pieces on a 7” reel.  
Distance Between  
Centerline (mm)  
Carrier  
Tape (mm)  
Cover  
Carrier (mm)  
Material  
Vendor  
Cavity (mm)  
Length  
direction  
(P2)  
Width  
Direction  
(F)  
Length Width  
Depth  
(K0)  
Pitch  
(P1)  
Width  
(W)  
Width  
(W)  
Vendor P/N  
(A0)  
(B0)  
QFN0400X  
0450C  
Tek-Pak  
4.35  
4.35  
1.1  
8.0  
2.00  
5.50  
12.0  
9.20  
- 14 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  
QPA2626  
17ꢀ–ꢀ22 GHz GaAs Low Noise Amplifier  
Handling Precautions  
Parameter  
Rating Standard  
ESDꢀ–ꢀHuman Body Model (HBM)  
ESDꢀ–ꢀCharge Device Model (CDM)  
MSLꢀ–ꢀMoisture Sensitivity Level  
1A  
C2b  
3
ANSI/ESD/JEDEC JS-001  
Caution!  
ESD-Sensitive Device  
ANSI/ESD/JEDEC JS-002  
IPC/JEDEC J-STD-020  
RoHS Compliance  
This product is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances  
in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU.  
This product also has the following attributes:  
Lead Free  
Halogen Free (Chlorine, Bromine)  
Antimony Free  
TBBP-A (C15H12Br402) Free  
SVHC Free  
Contact Information  
For the latest specifications, additional product information, worldwide sales and distribution locations:  
Tel: 1-844-890-8163  
Web: www.qorvo.com  
Email: customer.support@qorvo.com  
Important Notice  
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained  
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained  
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for  
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any  
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by  
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED  
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER  
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,  
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,  
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal  
injury or death.  
Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.  
- 15 of 15 -  
Data Sheet Rev. D, May 2020 | Subject to change without notice  
www.qorvo.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY