QPA9133TR7 [QORVO]
3.3 â 5.0 GHz 100 Differential Input Gain Block;型号: | QPA9133TR7 |
厂家: | Qorvo |
描述: | 3.3 â 5.0 GHz 100 Differential Input Gain Block |
文件: | 总11页 (文件大小:1127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPA9133
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
®
Product Overview
The QPA9133 is an 100 Ω differential input to 50 Ω single-
ended output, wideband gain block. It is well suited as the
5G m-MIMO BTS Tx path gain stage, to directly interface
with the DAC of the transceiver, eliminating the need for a
discrete Balun.
12-pin, 2ꢀxꢀ2ꢀmm SMT Package
With Qorvo’s GaAs E-pHEMT process, this amplifier
delivers exceptional performance with 18ꢁdB of small signal
gain and 34 dBm output 3rd order intercept (OIP3). The
amplifier has excellent gain flatness of 0.5 dB over any 400
MHz bandwidth and a CMRR of 35dB. The amplifier
features a shut-down function through VPD control Pin.
Key Features
• 3.3ꢁGHz to 5.0 GHz Operational Frequency
• 100 Ohm Differential Input
• 50 Ohm Single-Ended Output
• +34 dBm OIP3
The QPA9133 is optimized over 3.3 GHz to 5.0 GHz band
and is housed in a compact 2X2mm SMT package
• 18ꢁdB Gain
• Small 2ꢁxꢁ2ꢁmm SMT Package
Functional Block Diagram
Applications
• 5G m-MIMO
• Mobile Infrastructure
• General Purpose Wireless
• TDD / FDD System
Ordering Information
Part No.
QPA9133TR7
Description
2500 pcs on 7” reel (standard)
QPA9133EVB-01
Differential Input Evaluation Board
Top View
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
1 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
-65 to +150°C
+22 dBm
+7 V
Parameter
Device Voltage (VDD
TCASE
Min
+3.3
−40
Typ
Max Units
Storage Temperature
RF Input Power, CW, 50ꢁΩ, T=25ꢁ°C
)
+5
+5.25
+105
+190
V
°C
°C
Device Voltage (VDD
)
Tj for >106 hours MTTF
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Dissipated Power (PDISS
)
0.7 W
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications
Parameter
Conditionsꢀ(1)
Min
Typ
Max
Units
MHz
MHz
dB
Operational Frequency Range
Test Frequency
Small Signal Gain (2)
Gain Flatness
Input Return Loss (2)
Output Return Loss
Output P1dB
3300
5000
3500
18
17
21
Any 400 MHz BW within band
0.5
10
dB
dB
10
dB
+18
+29
+19
+34
100
1.8
70
dBm
dBm
ohm
dB
Output IP3
Poutꢁ=ꢁ+1 dBm/tone, ∆fꢁ=ꢁ1ꢁMHz
Differential
Input Impedance
Noise Figure
Input Balun and PCB trace losses deducted
VPD = 0.63 V
Device Current, ON
Device Current, OFF
VPD, Logic Low
110
mA
mA
V
VPD = 1.17 V
4
0
0.63
VDD
VPD, Logic High
IPD, Control Current
Switching Time
1.17
V
VPD Logic High
150
100
50
μA
50% DC to 10/90% RF
Junction to case
nsec
°C/W
Thermal Resistance, θjc
Notes:
1. Test conditions unless otherwise noted: VDDꢁ= +5.0ꢁV, VPD = +0.63 V, IDD = 70 mA, Tempꢁ=ꢁ+25ꢁ°C, 50ꢁΩ system.
2. Calculated or converted from 3 port S-Parameter measurement, and assuming an ideal Balun at differential port.
Logic Table
Parameter, VPD
High
Low
Device State
OFF
ON
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
2 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
3300ꢀto 5000MHz Evaluation Board - QPA9133EVB-01
Bill of Materials
Reference Des.
Value
Description
Manuf.
Qorvo
Part Number
291652
PCB
U1
-
-
Printed Circuit Board
AMP, Differential Input Gain Block
Qorvo
QPA9133
C2
1000 pF CAP, 1000 pF, 10%, 50V, X7R, 0402
Various
Various
Cal-Chip
Murata
Murata
Various
Cinch
C3
0.1 µF
10 µF
0.2 pF
2 nH
0 Ω
CAP, 0.1 µF, 10%, 50V, X5R, 0402
CAP, 10 µF, 20%, 25V, Tantalum, 6032
CAP, 0.2 pF, ±0.1pF, 50V, Hi-Q, 0402
IND, 2 nH, ±0.1 nH, Thin Film, 0402
RES, 0 Ω, 1/10W, 0402
C4
TCMIE106CT
C7
GJM1555C1HR20BB01D
LQP15MN2N0B02D
L1
R1
J1, J2, J3
-
CONN, SMA F STRT .062”
142-0701-851
Typical Performance – QPA9133EVB-01
Parameter
Conditions(1)
Typical Value
Units
Frequency
Gain(2)
Input Return Loss(2)
Output Return Loss
Noise Figure
Output P1dB
3300
19.9
12.8
8.6
3500
20.3
14.5
8.3
3600
3800
20.8
14.3
7.6
4500
4800
21.6
8.4
5000
20.6
9.8
MHz
dB
Small signal
20.5
15.1
8.0
21.8
7.9
dB
8.5
7.4
4.8
dB
Balun & PCB trace lose excluded
1.61
19.9
35.8
1.69
19.3
34.5
1.70
19.0
35.3
2.00
18.8
34.2
1.95
16.5
32.5
1.97
16.5
32.2
2.06
16.5
32.0
dB
dBm
dBm
Output IP3
Notes:
Pout = -1 dBm/tone, f = 1 MHz
1. Test conditions unless otherwise noted: VDDꢁ= +5.0ꢁV, VPD = +0.63 V, IDD = 70 mA, VPD = +0.63 V, Tempꢁ=ꢁ+25ꢁ°C, 50ꢁΩ system.
2. Calculated or converted from 3 port S-Parameter measurement, and assuming an ideal Balun at differential port.
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
3 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Performance Plots(1) – QPA9133EVB-01
Test conditions unless otherwise noted: VDD = +5V, VPD = +0.63V, IDQ = 70 mA , Temp.=+25ꢀ°C
Note:
1. Differential related s-parameters converted or calculated from 3 port measurement, and assuming an ideal Balun at differential port.
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
4 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Performance Plots – QPA9133EVB-01 (Continued)
Test conditions unless otherwise noted: VDD = +5V, VPD = +0.63V, IDQ = 70 mA , Temp.=+25ꢀ°C
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
5 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
3300ꢀto 5000MHz Evaluation Board with Balun
Bill of Materials, EVB with Balun
Reference Des.
Value
Description
Manuf.
Qorvo
Part Number
289725
PCB
U1
-
-
-
Printed Circuit Board
AMP, Differential Input Gain Block
BALUN, 100 Ω Differential / 50 Ω Single Ended
Qorvo
QPA9133
B1
Anaren
Various
Various
Cal-Chip
Murata
Murata
Various
Cinch
BD3150N50100AHF
C2
1000 pF CAP, 1000 pF, 10%, 50V, X7R, 0402
-
C3
0.1 µF
10 µF
0.2 pF
2 nH
0 Ω
CAP, 0.1 µF, 10%, 50V, X5R, 0402
CAP, 10 µF, 20%, 25V, Tantalum, 6032
CAP, 0.2 pF, ±0.1pF, 50V, Hi-Q, 0402
IND, 2 nH, ±0.1 nH, Thin Film, 0402
RES, 0 Ω, 1/10W, 0402
-
C4
TCMIE106CT
GJM1555C1HR20BB01D
LQP15MN2N0B02D
-
C7
L1
R1
J1, J3
-
CONN, SMA F STRT .062”
142-0701-851
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
6 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Pad Configuration and Description
Top View
Pad No.
Label Description
Pads with no electrical connection internally. It may be left floating or connected to ground. Land pads
should be provided for PCB mounting integrity.
1, 3, 4, 5, 7,10, 12
NC
2
RFIN+ Positive end of the differential input. External DC blocking capacitor required if DC is present.
RFIN- Negative end of the differential input. External DC blocking capacitor required if DC is present.
3
6
VPD
RFIN
VDD
-
Control input. Amplifier ON or OFF
9
RF output. Internally matched to 50 ohms.
11
DC voltage input. Power supply for amplifier. RF choke required.
DC and RF ground. Via holes required for DC, RF and thermal conductivity.
Center Ground Pad
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
7 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Package Marking and Dimensions
Marking: Part Number – 9133
Trace Code –ꢁXXXX up to 4 Characters assigned by sub-contractor
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. The terminal #1 identifier and terminal numbering conform to SPE-000677.
Recommended PCB Layout Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 0.5 oz. copper minimum for top and bottom layer metal.
3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm
(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.01”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
8 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Tape and Reel Information – Carrier and Cover Tape Dimensions
Feature
Measure
Symbol
Size (in)
0.087
0.087
0.037
0.157
0.079
0.217
0.362
0.472
Size (mm)
2.20
Length
A0
B0
K0
P1
P2
F
Width
2.20
Cavity
Depth
0.95
Pitch
4.00
Cavity to Perforation - Length Direction
2.00
Centerline Distance
Cavity to Perforation - Width Direction
5.50
Cover Tape
Carrier Tape
Width
Width
C
9.20
W
12.0
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
9 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Tape and Reel Information – Reel Dimensions (7”)
Standard T/R size = 2,500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
6.969
0.717
0.504
2.283
0.512
0.079
0.787
Size (mm)
177.0
18.2
Diameter
A
W2
W1
N
Flange
Thickness
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
12.8
58.0
C
13.0
Hub
B
2.0
D
20.0
Tape and Reel Information – Tape Length and Label Placement
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A.
2. Labels are placed on the flange opposite the sprockets in the carrier tape.
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
10 of 11
www.qorvo.com
QPA9133
®
3.3 – 5.0 GHz 100Ω Differential Input Gain Block
Handling Precautions
Parameter
Rating
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
ESDꢁ–ꢁCharged Device Model (CDM)
MSLꢁ–ꢁMoisture Sensitivity Level
Class 1C ESDAꢀ/ꢀJEDEC JS-001-2017
Caution!
ESD-Sensitive Device
Class C3 JEDEC JESD22-C101F
Level 3
IPC/JEDEC J-STD-020E
Solderability
Compatible with both lead-free (260°C max. reflow temperature) and tin/lead (245°C max. reflow temperature) soldering processes.
Solder profiles available upon request.
Contact plating: ENEPIG
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, Rev. D, April 22, 2020 | Subject to change without notice
11 of 11
www.qorvo.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明