QPA9903EVB-01 [QORVO]
1805-1880MHz 4 W High-Efficiency Amplifier;
| 型号： | QPA9903EVB-01 |
| 厂家： | 
Qorvo |
| 描述： | 1805-1880MHz 4 W High-Efficiency Amplifier |
| 文件： | 总14页 (文件大小：1664K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPA9903
1805-1880MHz 4 W High-Efficiency Amplifier
®
Product Overview
The QPA9903 is a high-efficiency, linearizable power
amplifier targeting Band 3 small-cell wireless infrastructure
systems. Using InGaP/GaAs HBT technology, the product
delivers high efficiency of 33.8% at +28dBm average output
power while providing excellent DPD linearized ACPR of
-50dBc for signal bandwidths of up to 60MHz.
16 Pad 5ꢀxꢀ5ꢀmm Package
The QPA9903 is housed in a 5x5mm SMT package. It is
pin-to-pin compatible to QPA9908 (band 8 high-efficiency
small cell PA).
Key Features
• 1805ꢁ–ꢁ1880ꢁMHz
• 32ꢁdB Gain typical across the band
• Over 36 dBm P3dB
• 33.8% PAE at +28 dBm power output
• <-50 dBc ACPR DPD linearized at +28 dBm power
output with 1-carrier signal
• 1.8V logic compatible PA ON/OFF control
• On chip ESD protection
Applications
Functional Block Diagram
• 3GPP Band 3 Small Cells
• M-MIMO
• Repeaters / DAS
• Mobile Infrastructure
• General Purpose Wireless
Ordering Information
Part No.
Description
QPA9903TR13
QPA9903EVB-01
2500 on reel
1805-1880 MHz EVB
Top View
Datasheet, Jun. 30th, 2021 | Subject to change without notice
1 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
−55 to +125ꢁ°C
+10 dBm
Parameter
Device Voltage (VCC
TCASE
Min
+4.75
−40
Typ
Max Units
Storage Temperature
RF Input Power, Pulsed CW, 50ꢁΩ(1)
)
+5
+5.25
+85
V
°C
°C
Device Voltage (VCC
)
+5.5 V
Tj for >106 hours MTTF
+175
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Note:
1. 1805-1880 MHz, Pulsed CW, 10% duty cycle, 100us period
Electrical Specifications
Parameter
Conditionsꢀ(1)
Min
Typ
Max
Units
MHz
MHz
dB
Operational Frequency Range
Test Frequency
Gain
1805
1880
1840
32
Poutꢁ=ꢁ+28ꢁdBm
30
34.2
-30
Input Return Loss
-17.5
36
dB
Output P3dB
10 μs pulse width, 10% duty cycle
Poutꢁ=ꢁ+28ꢁdBm
33.5
29
dBm
%
Power Added Efficiencyꢁ(2)
ACPR(Uncorrected)ꢁ(2)
ACPR with DPD (2)
ACPR(Uncorrected)ꢁ(3)
ACPR with DPDꢁ(3)
Quiescent Current, ICQ
Total Operating Current
Thermal Resistance, θjc
VEN High
33.8
-34
-50
-31
-45
92
Poutꢁ=ꢁ+28ꢁdBm
dBc
dBc
dBc
dBc
mA
mA
°C/W
V
Poutꢁ=ꢁ+28ꢁdBm
Poutꢁ=ꢁ+28ꢁdBm
Poutꢁ=ꢁ+28ꢁdBm
Pins 12, 14 and 16
Pins 5, 12, 14 and 16, Poutꢁ=ꢁ+28ꢁdBm
Junction to case
360
27.4
1.8
0
1.17
0
VCC
0.5
VEN Low
V
2nd Harmonic
Poutꢁ=ꢁ+28ꢁdBm
Poutꢁ=ꢁ+28ꢁdBm
-30
-45
dBc
dBc
3rd Harmonic
Notes:
1. Test conditions unless otherwise noted: All VCCꢁ& VBIAS =ꢁ+5.0ꢁV, VEN = +1.8ꢁV, Tempꢁ=ꢁ+25ꢁ°C, 50ꢁΩ system.
2. LTE, 20 MHz E-UTRA Test Model 1.1 or 3.1, PAR = 8.5 dB at 0.01% Probability
3. LTE, 20 MHz x 3 E-UTRA Test Model 1.1 or 3.1, PAR = 8.5 dB at 0.01% Probability
Power Amplifier Enable Logic Table
Parameter
High
Low
VEN
Power Amplifier ON
Power Amplifier OFF
Datasheet, Jun. 30th, 2021 | Subject to change without notice
2 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
1805–1880 MHz Evaluation Board ꢀ–ꢀ QPA9903EVB01
Notes:
1. See Evaluation Board PCB Information for material and stack up.
Bill of Material ꢀ–ꢀ QPA9903EVB01
Reference Des.
Value Description
Manuf.
Qorvo
Part Number
U1
-
Amplifier, QPA9903 1805-1880MHz, High-Efficiency
QPA9903
C1, C2
100 pF CAP,100 pF, 0603, 5%, 50V, NPO
various
C5, C9, C13, C17,
C19
1000 pF CAP,1000 pF, 0603, 5%, 50V, NPO
various
various
C4, C8, C12, C18,
C20
0.1 µF
CAP,0.1 µF, 0603, 10%, 50V, X7R
C3, C7, C14
L1, L2
10 µF
CAP, 10 µF, 1206, 16V
various
various
0 Ω
RES 0 Ω, 0603, 1/16W, Chip
Datasheet, Jun. 30th, 2021 | Subject to change without notice
3 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Performance Plots - LTE
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, T = +25°C, tested using a single-carrier, 20 MHz LTE
signal with 8.5 dB PAR at 0.01% CCDF on a reference design fixture.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
4 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Performance Plots - LTE
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, tested at 1840 MHz using a single-carrier, 20 MHz LTE
signal with 8.5 dB PAR at 0.01% CCDF on a reference design fixture.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
5 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Performance Plots - Pulse
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, T = +25°C, tested using a pulse signal, 10% duty cycle.
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV, tested at 1840 MHz using a pulse signal, 10% duty cycle.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
6 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Performance Plots – S-parameter
Test conditions unless otherwise noted: VBIASꢁ=ꢁ5ꢁV, VCC1,2,3ꢁ=ꢁ5ꢁV, VENꢁ=ꢁ1.8ꢁV.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
7 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Pad Configuration and Description
Top View
Pad No.
Label
Description
1, 3, 4, 7, 8, 10, 11,
13, 15
GND
Ground connection.
2
RFIN
VBIAS
VEN
RF input, internally matched to 50Ω.
5
Bias circuit supply voltage
6
Amplifier enable voltage (regulated internally)
RF output, internally matched to 50Ω. External DC blocking capacitor required
Second stage (Carrier) supply voltage
Second stage (Peaker) supply voltage
Driver stage supply voltage
9
RFOUT
VCC3
VCC2
VCC1
12
14
16
Ground connection. The back side of the package should be connected to the ground plan though
as short of a connection as possible. PCB via holes under the device are recommended.
Backside Paddle
GND
Datasheet, Jun. 30th, 2021 | Subject to change without notice
8 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Package Marking and Dimensions
Marking: Pin 1 Indicator and Qorvo Logo
Part Number – QPA9903
Trace Codeꢁ–ꢁXXXXXX Up to 8 Characters to be Assigned by sub-Contractor
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
3. Contact plating: ENEPIG
PCB Mounting Pattern
Datasheet, Jun. 30th, 2021 | Subject to change without notice
9 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Evaluation Board PCB Information
PC Board Layout
PCB Material (stackup)
Layer
Name
Material
Thickness
Constant
3.5
1
2
3
4
5
Top Overlay
Top Solder
Top Layer
Dielectric1
Bottom Layer
Solder Resist
Copper
RO4350
Copper
0.40 mil
1.40 mil
20.00 mil
1.40 mil
3.48
Total thickness: 23.2mill
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm
(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
10 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 13” reel.
Feature
Measure
Symbol
Size (in)
0.209
0.209
0.051
0.315
0.079
0.217
0.362
0.472
Size (mm)
Length
A0
B0
K0
P1
P2
F
5.3
5.3
1.3
8.0
2.0
5.5
9.2
12
Width
Cavity
Depth
Pitch
Cavity to Perforation - Length Direction
Centerline Distance
Cavity to Perforation - Width Direction
Cover Tape
Carrier Tape
Width
Width
C
W
Datasheet, Jun. 30th, 2021 | Subject to change without notice
11 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Tape and Reel Information – Reel Dimensions
Packaging reels are used to prevent damage to devices during shipping and storage, loaded carrier tape is typically wound onto a plastic
take-up reel. The reel size is 13" diameter. The reels are made from high-impact injection-molded polystyrene (HIPS), which offers
mechanical and ESD protection to packaged devices.
Feature
Measure
Symbol
Size (in)
12.992
0.717
Size (mm)
330.00
18.20
Diameter
A
W2
W1
N
Flange
Thickness
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
0.504
12.80
4.016
102.00
13.00
C
0.512
Hub
B
0.079
2.00
D
0.795
20.2
Tape and Reel Information – Tape Length and Label Placement
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481.
2. Labels are placed on the flange opposite the sprockets in the carrier tape.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
12 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Recommended Solder Temperature Profile
Datasheet, Jun. 30th, 2021 | Subject to change without notice
13 of 14
www.qorvo.com
QPA9903
®
1805-1880MHz 4 W High-Efficiency Amplifier
Handling Precautions
Parameter
Rating
Standard
ESDꢁ–ꢁHuman Body Model (HBM)
1C
ESDAꢀ/ꢀJEDEC JS-001-2012
JEDEC JESD22-C101F
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢁ–ꢁCharged Device Model (CDM) C3
MSLꢁ–ꢁMoisture Sensitivity Level
3
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: ENEPIG
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
• Product uses RoHS Exemption 7c-I to meet RoHS Compliance requirements.
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information:
Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Datasheet, Jun. 30th, 2021 | Subject to change without notice
14 of 14
www.qorvo.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明