QPL1811 [QORVO]
75Ω CATV Amplifier 50 â 1800MHz;
| 型号： | QPL1811 |
| 厂家： | 
Qorvo |
| 描述： | 75Ω CATV Amplifier 50 â 1800MHz 有线电视 |
| 文件： | 总11页 (文件大小：1133K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Product Overview_________________
The QPL1811 is a high performance broadband
DOCSIS 4.0 MMIC amplifier designed with GaAs
pHEMT technology optimized for low noise and high
linearity. A Darlington configuration is utilized for broad-
band performance with on-chip active bias circuit for
consistent bias current and repeatable performance. The
QPL1811 contains two amplifiers used in push-pull
configuration for excellent second and third order
linearity performance.
Package: SOIC-8
Functional Block Diagram___________
Key Features__________________
5V to 7V Single Supply
High Gain: 16dB @ 1800MHz
OIP3: +42dBm
P1dB: +24dBm
Compact Size: 8-pin SOIC
50MHz to 1800MHz operation
supporting DOCSIS 4.0
pHEMT GaAs device technologies
Ordering Information________________
Applications___________________
Part Number
Description
Broadband CATV Amplifiers and Nodes
CATV Line Driver Amplifier
DOCSIS 4.0
QPL1811SB
QPL1811SR
QPL1811TR13
QPL1811EVB-01
Sample bag with 5 pieces
7" Reel with 100 pieces
13" Reel with 2500 pieces
Evaluation Board
75 Ohm Amplifiers
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 1 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Absolute Maximum Ratings____________________________________________
Rating
Unit
Parameter
Supply Voltage (VDD)
Supply Current (IDD)
Maximum RF Input Power
Maximum Junction Temperature
Storage Temperature
9
500
20
Volts
mA
dBm
°C
160
-40 to +85
°C
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Electrical Specifications_______________________________________________
Condition (1)
Parameter
Min
5
140
50
Typ
7
290
Max
8
Unit
Volts
mA
MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dBm
˚C/W
Supply Voltage (VDD)
Supply Current (IDD)
Frequency Range
Gain
1800
At 50MHz
At 1200MHz
At 1800MHz
15.2
16
16.4
1.2
20
18
18
3.5
44
42
42
70
70
70
43
42
38
24
Gain Slope
Reverse Isolation
Input Return Loss
Output Return Loss
Noise Figure(2)
MER (3)
At +64dBmV Total Composite
Output power
At 1200MHz
At 111MHz
At 1302MHz
At 1698MHz
At 50MHz
At 1200MHz
At 1800MHz
At 50MHz
OIP2
OIP3
At 1200MHz
At 1800MHz
Output P1dB
Thermal Resistance
32
1.Typical performance at these conditions: Temp = +25°C, VDD = +7V, 75Ω system, Full band unless
otherwise noted
2. Noise Figure of the part only. The input BALUN loss has been compensated.
3. 111MHz to 1791MHz, 0dB tilt, 149 Ch.+ 4 OFDM Ch. CCN Noise BW (ANSI/SCTE 17): 5.36MHz for J.83/B. Tx
Data: ITU-T, Annex B, QAM256, 5.36 MSymbols/s
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 2 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Evaluation Board Schematic 50 -1800MHz________________________________
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 3 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Evaluation Board Bill of Material________________________________________
Ref Des
Description
CATV Amplifier
Qty
1
Mfg Name
Mfg Part #
QPL1811
U1
Qorvo
Qorvo
PCB
PCB, QPL1811
1
QPL1811-4000
C13, C16
C8, C9
C5, C7
CAP, 1000pF, 10%, 50V, X7R, 0603
CAP, 220pF, 5%, 50V, C0G, 0603
CAP, 2pF, +/-0.1pF, 50V, HI-Q, 0402
CAP, 1000pF, 5%, 50V, C0G, 0402
CAP, 100pF, 5%, 50V, C0G, 0603
CAP, 1uF, 10%, 50V, X5R, 0603
Cap, 1pF /0.1pF/0402/NP0/50V
Cap, 33pF /5%/0402/NP0/50V
RES, 820 OHM, 5%, 1/10W, 0402
RES, 453 OHM, 1%, 1/10W, 0402
Res, 8.2K/1%/0402
2
Johanson Technology
Johanson Technology
MURATA ELECTRONICS
MURATA ELECTRONICS
AVX Asia Limited
500R14W102KV4T
500R14N221JV4
2
2
GJM1555C1H2R0BB01D
GRM1555C1H102JA01D
06035A101JAT2A
06035D105KAT2A
C2, C3, C4, C6
4
C14, C15
2
C12, C17
2
AVX Asia Limited
C10, C11, C20, C21
4
Johanson Technology
Johanson Technology
Kamaya, Inc
C1
1
R1
1
RMC1/16S-821JTH
ERJ-2RKF4530X
R2, R3
R10, R13
L4
2
Panasonic
2
Kamaya, Inc
IND, 0402 TF 2.2nH
1
MURATA ELECTRONICS
TAIYO YUDEN
LQP15MN2N2B02D
LG HK10053N9S-T
BLM18HE152SN1D
4813040R
L1
IND, 3.9nH, +/-0.3nH, M/L, 0402
FER, BEAD, 1500 OHM, 500mA, 0603
XFMR, 1:1TLT, 4.5-3000 MHz, 75 Ohm
CONN, F, EDGE MOUNT, 60 MIL
1
L2, L3
T1, T2
J1, J2
2
MURATA ELECTRONICS
MINNTRONIX INC
Trompeter Electronics
SAMTEC INC.
2
2
CBJE130-1
P1
CONN, HDR, ST, 4-PIN, 0.100"
NOT POPULATED ITEM
1
7
TSW-104-08-S-S
DUMMY PART
R7, R8, R9, C18, C19
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 4 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Evaluation Board Layout 50 -1800MHz________________________________
Evaluation Board PCB Material and Stack-up
4 Layer FR4 Board, 2.25inches X 1.5inches
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 5 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Performance Data at +7V_____________________________________________
QPL1811 Gain over Temperature
QPL1811 Reverse Isolation over Temperature
-10
-15
-20
-25
-30
-35
-40
22
20
18
16
14
12
10
8
6
4
-40 Deg C
650
25 Deg C
85 Deg C
1550 1850
2
-40 Deg C
650
25 Deg C
85 Deg C
1550
0
50
350
950
1250
Frequency (MHz)
50
350
950
1250
1850
Frequency (MHz)
QPL1811 Output Return Loss over Temperature
QPL1811 Input Return Loss over Temperature
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
-32
-34
-36
-38
-40
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
-32
-34
-36
-38
-40
-40 Deg C
25 Deg C
85 Deg C
-45 Deg C
350 650
25 Deg C
950
85 Deg C
1550
50
1250
1850
50
350
650
950
1250
1550
1850
Frequency (MHz)
Frequency (MHz)
QPL1811 OIP2 Plus Vs Frequency
QPL1811 OIP2 Minus Vs Frequency
100
100
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
-40 Deg C
25 Deg C
+85 Deg C
1550
-40 Deg C
25 Deg C
+85 Deg C
50
350
650
950
1250
1850
50
350
650
950
Frequency (MHz)
1250
1550
1850
Frequency (MHz)
Typical performance at these conditions:
Temp = +25°C, VDD = +7V, 75Ω system, Full band unless otherwise noted
Performance Data at +7V_______________________________________________
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 6 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
QPL1811 OIP3 Vs Frequency
QPL1811 P1dB over Frequency
50
45
40
35
30
25
20
15
10
5
30
25
20
15
10
5
-40 Deg C
25 Deg C
+85 Deg C
1550
-40 Dge C
350 650
25 Deg C
950
+85 Deg C
1550 1850
0
0
50
1250
50
350
650
950
Frequency (MHz)
1250
1850
Frequency (MHz)
(3)
QPL1811 MER Vs TCP Output at 7V/289mA
Noise Figure(2) Vs Frequency
50
5
4.5
4
48
46
44
42
40
38
36
-40°C
25°C
85°C
3.5
3
2.5
2
1.5
1
255MHz
657MHz
1245MHz
1791MHz
0.5
0
53 54 55 56 57 58 59 60 61 62 63 64 65
Total Composite Power (dBmV)
Frequency (MHz)
1.Typical performance at these conditions:
Temp = +25°C, VDD = +7V, 75Ω system, Full band unless otherwise noted.
2. Noise Figure of the part only. The input BALUN loss has been compensated.
3. Test Conditions: 111MHz to 1791MHz, 0dB tilt, 149 channels. + 4 OFDM channels.
CCN Noise BW (ANSI/SCTE 17): 5.36MHz for J.83/B. Tx Data: ITU-T, Annex B, QAM256, 5.36 MSymbols/s
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 7 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Performance Data Vs. Supply Voltage___________________________________
QPL1811 OIP2 Plus Over Voltage
QPL1811 OIP2 Minus Over Voltage
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
5V
7V
6V
8V
5V
7V
6V
8V
50
350
650
950
1250
1550
1850
50
350
650
950
1250
1550
1850
Frequency (MHz)
Frequency (MHz)
QPL1811 OIP3 Over Voltage
QPL1811 P1dB Over Voltage
50
45
40
35
30
25
20
15
10
5
30
25
20
15
10
5
5V
7V
6V
8V
5V
7V
6V
8V
0
0
50
350
650
950
1250
1550
1850
Frequency (MHz)
50
350
650
950
1250
1550
1850
Frequency (MHz)
QPL1811 Vdd Vs. Idd at 25Deg C
QPL1811 MER(3) Vs TCP Output at 5V/184mA
50
48
46
44
42
40
38
36
350
300
250
200
150
255MHz
657MHz
1245MHz
1791MHz
5
6
7
8
Vdd (Volts)
53
54
55
56
57
58
59
60
61
62
63
Total Composite Power (dBmV)
1.Typical performance at these conditions:
Temp = +25°C, 75Ω system, Full band unless otherwise noted.
2. Noise Figure of the part only. The input BALUN loss has been compensated.
3. Test Conditions: 111MHz to 1791MHz, 0dB tilt, 149 channels. + 4 OFDM channels.
CCN Noise BW (ANSI/SCTE 17): 5.36MHz for J.83/B. Tx Data: ITU-T, Annex B, QAM256, 5.36 MSymbols/s
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 8 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Package Marking
Pin Configuration and Description
Pin
Name
Description
1
RFIN1
RF input for plus side of amplifier
2
3
4
5
6
7
8
9
NC
NC
NC
No Connect / GND
RFIN2
RFOUT1
NC
RF input for minus side of amplifier
RF output for plus side of amplifier
No Connect / GND
NC
No Connect / GND
RFOUT2
GND
RF output for minus side of amplifier
Exposed bottom of part, device ground
Ensure that the backside via region makes good physical contact with the heat sink.
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 9 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Package Outline
Notes:
1. All Dimensions are in inches.
2. Angles are in degrees.
Recommended Mounting Pattern
Notes: All dimensions are in millimeters. Angles are in degrees.
1. Use 1ꢀoz. copper minimum for top and bottom layer metal.
2. Vias are required under the backside paddle for proper RF/DC grounding and thermal dissipation.
3. Recommend a 0.35ꢀmm diameter bit for drilling via holes and a final plated thru diameter of 0.25ꢀmm.
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 10 of 11 -
QPL1811
75Ω CATV Amplifier 50 – 1800MHz
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
1A
ANSI / ESDAꢁ/ꢁJEDEC JS-001
ANSI / ESDAꢁ/ꢁJEDEC JS-002
IPC / JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) C4
MSLꢀ–ꢀMoisture Sensitivity Level
MSL1
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact plating: Matte Sn
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Tel: 1-844-890-8163
Web: www.qorvo.com
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death. Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
© 2020 Qorvo US, Inc.
Qorvo Confidential & Proprietary Information
Data Sheet – Rev C, Oct 23, 2020 | Subject to change without notice
- 11 of 11 -
相关型号：
©2020 ICPDF网 联系我们和版权申明