QPL6208QSQ [QORVO]
High-Linearity SDARS LNA;型号: | QPL6208QSQ |
厂家: | Qorvo |
描述: | High-Linearity SDARS LNA |
文件: | 总7页 (文件大小:287K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
QPL6208Q
High-Linearity SDARS LNA
Product Description
The QPL6208Q is a high linearity, ultra-low noise gain block
amplifier in a small 2x2 mm surface-mount package. At 2332
MHz, the amplifier typically provides +37dBm OIP3. The
amplifier does not require any negative supplies for operation
and can be biased from positive supply rails from 3 to 5 V. The
device is housed in a lead- free/green/RoHS-compliant industry-
standard 2x2 mm package.
Package: DFN, 8-pin
2.0mm x 2.0mm x 0.85mm
The QPL6208Q uses a high performance E-pHEMT process.
The low noise amplifier contains an internal active bias to
maintain high performance over temperature.
Feature Overview
Tested in accordance with AEC-Q100 Grade 2
Ultra-low noise figure, 0.48 dB NF at 2330 MHz
High linearity, +37 dBm Output IP3
Functional Block Diagram
High input power ruggedness, >22 dBm PIN, MAX
Unconditionally stable
Integrated on-chip matching, 50 ohm in/out
Integrated active bias
Integrated shutdown control pin
3-5 V positive supply voltage: −Vgg not required
Applications
SDARS Active Antenna
Ordering Information
PART NUMBER
DESCRIPTION
QPL6208QSB
QPL6208QSQ
QPL6208QSR
QPL6208QTR7
QPL6208QPCK401
Standard 5-piece bag
Standard 25-piece bag
Standard 100-piece reel
Standard 2.5K –piece Reel
Evaluation Board + 5-piece bag
Standard T/R Size = 2500 pieces on a reel
Data Sheet Rev G
Subject to change without notice
1 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
Absolute Maximum Ratings
PARAMETER
Storage Temperature
RATING
-65 to 150°
+7
UNITS
C
V
Supply Voltage (VDD)
RF Input Power, CW, 50Ω,T = 25°C
+22
dBm
Recommended Operating Conditions
PARAMETER
Supply Voltage (V
MIN
TYP
MAX
UNITS
)
DD
+2.0
+3.6
+4.0
+105
+200
V
T
CASE
(for >10 hours MTTF)
−40
°C
°C
6
T
J
Electrical Specifications
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Operational Bandwidth
Test Frequency
Gain
100
3000
MHz
MHz
dB
2330
13.7
13
13.3
14.5
Input Return Loss
Output Return Loss
Output P1dB
dB
18
dB
+19
+32
+19.6
+37
0.48
dBm
dBm
dB
Output IP3
Pout=+5 dBm/tone, Δf=1 MHz
Noise Figure1
0.75
0.4
Power Shutdown Control (Pin 6)
On state
0
V
Off state (Power down)
On state
2.5
40
3.3
53
VDD
60
V
Current, I
mA
mA
µA
DD
Off state (Power down)
1.3
75
Shutdown pin current, I
V
≥ 3 V
SD
PD
Thermal Resistance, θ
jc
Vdd = 5.0V
92
°C/W
Test conditions unless otherwise noted: VDD = +3.6V, Temp=+25°C, 50 Ω system.
Note: 1) Noise Figure data has input trace loss de-embedded.
Data Sheet Rev G
Subject to change without notice
2 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
Applications Schematic
Data Sheet Rev G
Subject to change without notice
3 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
Pin Configuration and Description
PIN NO.
LABEL
DESCRIPTION
2
RF In
RF Input pin. A DC Block is required.
A high voltage turns off the device. If the pin is not connected or is less than 0.4V,
then the device will operate under its normal operating condition. Tie pin to ground if
not being used.
6
Shut Down
RF Output pin. DC bias will also need to be injected through a RF bias choke/inductor for
operation.
7
RF Out / DCBias
NC
1, 3, 4, 5, 8
No electrical connection. Provide grounded land pads for PCB mounting integrity.
Backside
Paddle
RF/DC ground. Use recommended via pattern to minimize inductance and thermal
resistance; see PCB Mounting Pattern for suggested footprint.
RF/DC GND
Data Sheet Rev G
Subject to change without notice
4 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
Mechanical Information
Marking: Part number – 6208Q
Trace Code – XXXX
NOTES:
1. All dimensions are in millimeters. Angles are in degrees.
2. Except where noted, this part outline conforms to JEDEC standard MO-220, Issue E (Variation VGGC) for thermally enhanced
plastic very thin fine pitch quad flat no lead package (QFN).
3. Dimension and tolerance formats conform to ASME Y14.4M-1994.
4. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
Data Sheet Rev G
Subject to change without notice
5 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
PCB Mounting Pattern
NOTES:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
3. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We
recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).
4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.
Data Sheet Rev G
Subject to change without notice
6 of 7
www.qorvo.com
®
QPL6208Q
High-Linearity SDARS LNA
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with both lead-free (260 °C max. reflow
temperature) and tin/lead (245 °C max. reflow
temperature) soldering processes.
Caution! ESD-Sensitive Device
Package contact plating: NiPdAu
ESD Rating: Class 1B
Value:
Test:
Standard:
Passes ≥ 500 V to < 1000V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment).
ESD Rating: Class C3
Value:
Passes ≥ 1000 V to <2000V
Test:
Standard:
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
RoHs Compliance
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
PFOS Free
SVHC Free
MSL Rating
MSL Rating: Level 1
TBBP-A (C15H12Br402) Free
Test:
Standard:
260°C convection reflow
JEDEC Standard IPC/JEDEC J-STD-020
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Rev G
Subject to change without notice
7 of 7
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明