QPQ1031Q [QORVO]
Band 1/3 Multiplexer;
| 型号： | QPQ1031Q |
| 厂家： | 
Qorvo |
| 描述： | Band 1/3 Multiplexer |
| 文件： | 总18页 (文件大小：1705K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPQ1031Q
Band 1/3 Multiplexer
Product Overview
The QPQ1031Q is a compact, high-performance multiplexer
module fabricated using a patented LowDriftTM BAW technology
with performance optimized to enable carrier aggregation of LTE
bands 1 & 3.
The QPQ1031Q leverages the high-Q properties of the
LowDriftTM BAW technology to ensure minimal transmit insertion
loss in all bands being multiplexed without loading each other.
The QPQ1031Q module has also been designed with high
cross-isolation which is critical to ensure good receive
performance.
The QPQ1031Q uses unique Wafer Level Packaging (WLP)
techniques to enable a compact 2.5 mm x 2.0 mm footprint.
6 Pin 2.5 x 2.0 x 0.685mm leadless SMT package
Functional Block Diagram
Key Features
• Qualified to AEC-Q200 Grade 3
• Industry leading compact form-factor: 2.5mm x 2.0mm
• Minimizes PA current drain with excellent TX IL
• Improved RX sensitivity with low RX IL
• Single-Ended (SE) Ant, TRx Ports
• RoHS Compliant, Pb-Free Module Package
Applications
• LTE Telematics Units
• Carrier Aggregation
Bottom View
Ordering Information
Part Number
Description
QPQ1031QSR
QPQ1031QTR13
QPQ1031QEVB
Sample reel of 100 pieces
13 inch reel of 2500 pieces
Evaluation Board (EVB)
Fully Assembled EVB +
Sample Bag with 5 pieces
QPQ1031QPCK
QPQ1031Q Datasheet Rev D | Subject to change without notice
www.qorvo.com
1 of 18
QPQ1031Q
Band 1/3 Multiplexer
Absolute Maximum Ratings
Parameter
Conditions
Rating
Storage Temperature
RF Input Power, B1, Pin 1
RF Input Power, B3, Pin 2
–ꢀ40 to +100°C
+38 dBm
CW, 1920 – 1980MHz, 25 °C
CW, 1710 – 1785MHz, 25 °C
+36.5 dBm
Operation of this device outside the parameter ranges given above may cause permanent damage.
Recommended Operating Conditions(1)
Parameter
Tambient(2)
Min.
Typ.
Max.
+85
Units
-40
°C
1 Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating
conditions.
2
Case temperature allows 10˚C max rise over Ambient
Minimum Lifetime Ratings
Conditions
Rating
RF CW input signal of 31dBm in the 1920 MHz – 1980 MHz at max temp of 85°C
RF CW input signal of 31dBm in the 1710 MHz – 1785 MHz at max temp of 85°C
87.6 KHrs
87.6 KHrs
QPQ1031Q Datasheet Rev D | Subject to change without notice
2 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Electrical Specifications(1) Band 1 Uplink - Antenna
UNLESS OTHERWISE NOTED: OPERATING TEMP = −40ꢀ°C to +85ꢀ°C
PARAMETER
CONDITIONS
1950 MHz
MIN.
TYP(2)
1.6(3)
2.0(4)
1.9
1.6
55
MAX.
UNITS
Insertion Loss
dB
1920 – 1980 MHz
2.6
2.5
2.3
VSWR (Uplink Port)
VSWR (ANT Port)
1920 – 1980 MHz
Ratio
dB
1495.9 – 1510.9 MHz
1559 – 1605 MHz
1605.8 – 1680 MHz
1805 – 1880 MHz
2010 – 2025 MHz
2110 – 2170 MHz
2400 – 2500 MHz
31
41
45
49
10
53
39
56
52
Attenuation(5)
62
49
65
63
Notes:
1. Recommended EVB schematic/layout/BOM/PCB should be followed in order to achieve specified performance.
2. Data at 25ꢀ°C
3. Insertion Loss of the linear s-parameter at specified frequency
4. Integrated Insertion Loss over every 5MHz sliding windows
5. Absolute Attenuation referenced to 0 dB between specified frequency range
Electrical Specifications(1) Band 1 Antenna - Downlink
UNLESS OTHERWISE NOTED: OPERATING TEMP = −40ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
TYP(2)
1.6(3)
1.8(4)
1.5
Max.
Units
2140 MHz
Insertion Loss
dB
2110 – 2170 MHz
2.5
VSWR (Downlink Port)
VSWR (ANT Port)
2.2
2110 – 2170 MHz
Ratio
1.4
2.2
1447 – 1463 MHz
1710 - 1785 MHz
1757.5 – 1832.5 MHz
1920 – 1980 MHz
2400 – 2500 MHz
47
48
44
43
41
51
-
-
-
-
-
56
Attenuation(5)
51
dB
58
59
Notes:
1. Recommended EVB schematic/layout/BOM/PCB should be followed in order to achieve specified performance.
2. Data at 25ꢀ°C
3. Insertion Loss of the linear s-parameter at specified frequency
4. Integrated Insertion Loss over every 5MHz sliding windows
5. Absolute Attenuation referenced to 0 dB between specified frequency range
QPQ1031Q Datasheet Rev D | Subject to change without notice
3 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Electrical Specifications(1) Band 3 Antenna – Uplink
UNLESS OTHERWISE NOTED: OPERATING TEMP = −40ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
TYP(2)
1.8(3)
2.8(4)
1.8
Max.
Units
1747.5 MHz
Insertion Loss
dB
1710 – 1785 MHz
4.2
2.4
1.9
VSWR (Uplink Port)
VSWR (ANT Port)
1710 – 1785 MHz
Ratio
dB
1.5
1565 – 1586 MHz
1805 – 1880 MHz
2110 – 2170 MHz
2400 – 2500 MHz
49
48
47
35
57
62
Attenuation(5)
58
50
Notes:
1. Recommended EVB schematic/layout/BOM/PCB should be followed in order to achieve specified performance.
2. Data at 25ꢀ°C
3. Insertion Loss of the linear s-parameter at specified frequency
4. Integrated Insertion Loss over every 5MHz sliding windows
5. Absolute Attenuation referenced to 0 dB between specified frequency range
Electrical Specifications(1) Band 3 Antenna – Downlink
UNLESS OTHERWISE NOTED: OPERATING TEMP = −40ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
TYP(2)
1.8(3)
2.5(4)
1.5
Max.
Units
1842.5 MHz
Insertion Loss
dB
1805 – 1880 MHz
3.4
2.2
1.8
VSWR (Downlink Port)
VSWR (ANT Port)
1805 – 1880 MHz
Ratio
dB
1.4
1710 – 1785 MHz
1920 – 1980 MHz
2015 – 2075 MHz
2400 – 2500 MHz
51
52
45
45
55
55
Attenuation(5)
48
48
Notes:
1. Recommended EVB schematic/layout/BOM/PCB should be followed in order to achieve specified performance.
2. Data at 25ꢀ°C
3. Insertion Loss of the linear s-parameter at specified frequency
4. Integrated Insertion Loss over every 5MHz sliding windows
5. Absolute Attenuation referenced to 0 dB between specified frequency range
QPQ1031Q Datasheet Rev D | Subject to change without notice
4 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Electrical Specifications(1) Isolation
Unless Otherwise Noted: Operating Temp = −40ꢀ°C to +85ꢀ°C
Parameter
Conditions
Min.
55
44
52
59
50
48
43
52
50
56
TYP(2)
65
Max.
Units
1805 – 1808 MHz, B3 Tx Isolation in B3 Rx (3)
1805 – 1880 MHz, B3 Tx Isolation in B3 Rx
1710 – 1785 MHz, B3 Rx Isolation in B3 Tx
2110 – 2170 MHz, B1 Tx Isolation in B1 Rx
1920 – 1980 MHz, B1 Rx Isolation in B1 Tx
1805 – 1870 MHz
TX-RX Isolation in B3 RX
64
TX-RX Isolation in B3 TX
TX-RX Isolation in B1 RX
TX-RX Isolation in B1 TX
56
66
64
dB
64
B1 TX to B3 RX Isolation in B3 RX
1870 – 1880 MHz
64
B1 TX to B3 RX Isolation in B1 TX
B3 TX to B1 RX Isolation in B3 TX
B3 TX to B1 RX Isolation in B1 RX
Notes:
1920 – 1980 MHz
56
1710 – 1785 MHz
58
2110 – 2170 MHz
65
1. Recommended EVB schematic/layout/BOM/PCB should be followed in order to achieve specified performance.
2. Data at 25ꢀ°C
3. Integrated over 2.7MHz BW
QPQ1031Q Datasheet Rev D | Subject to change without notice
5 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Evaluation Board PCB Information
Evaluation Board
TOP
BOTTOM
QPQ1031Q Datasheet Rev D | Subject to change without notice
6 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Evaluation Board BOM
Item No
50
30
20
10
Material#
292211
268171
273892
281934
Rev
A
Qty
1
1
1
5
Ref Des
Description
QPQ1031Q-4000 EVB PCB
IND, 6.8nH, 3%, T/F, HI-Q, 0201
IND, 13nH, 3%, T/F, HI-Q, 0201
L2
L1
A
A
J1,J2,J3,J4,J5 CONN, RF COAXIAL, EDGE MNT, SMA
Application Circuit Schematic
Note : B1 TX (pin 1) and B3 TX (pin 2) are terminated with complex impedance to provide flexible matching options for optimizing TX
performance between PA and QPQ1031Q. All other ports are matched to 50 ohm impedance.
QPQ1031Q Datasheet Rev D | Subject to change without notice
7 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Performance Plots – Passband
Test conditions unless otherwise noted: Temp. = +25 °C
QPQ1031Q Datasheet Rev D | Subject to change without notice
8 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Performance Plots – TX & RX Wideband
Test conditions unless otherwise noted: Temp. = +25 °C
QPQ1031Q Datasheet Rev D | Subject to change without notice
9 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Performance Plots – ANT Port Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
QPQ1031Q Datasheet Rev D | Subject to change without notice
10 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Performance Plots – Return Loss/Impedance
Test conditions unless otherwise noted: Temp. = +25 °C
QPQ1031Q Datasheet Rev D | Subject to change without notice
11 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Performance Plots – Isolation
Test conditions unless otherwise noted: Temp. = +25 °C
QPQ1031Q Datasheet Rev D | Subject to change without notice
12 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Pin Configuration and Description
Bottom View
Pin Number
Label
B1 TX
B3 TX
ANT
Description
1
2
3
4
5
6
Band 1 Transmit Port
Band 3 Transmit Port
Band 1/3 Antenna Port
Band 1 Receive Port
Band 3 Receive Port
Package Ground
B1 RX
B3 RX
GND
Marking Diagram
QPQ1031Q Datasheet Rev D | Subject to change without notice
13 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Package Outline Drawings
Package Outline Dimension Drawing
Recommended Land Pattern
Recommended Land Pattern Mask
QPQ1031Q Datasheet Rev D | Subject to change without notice
14 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Tape and Reel Information – Carrier and Cover tape Dimensions
Feature
Measure
Symbol
Size (in)
Size (mm)
Length
A0
0.087
2.20
Width
Depth
Pitch
B0
K0
P1
P2
F
0.106
0.043
0.157
0.079
0.138
0.213
0.315
2.70
1.10
4.0
Cavity
Centerline
Distance
Cavity to Perforation - Length Direction
2.0
Cavity to Perforation - Width Direction
3.50
5.40
8.0
Cover Tape
Carrier Tape
Width
Width
C
W
QPQ1031Q Datasheet Rev D | Subject to change without notice
15 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Tape and Reel Information – Reel Dimensions
Packaging reels are used to prevent damage to devices during shipping and storage, loaded carrier tape is typically wound onto a
plastic take-up reel. The reel size is 13" diameter. The reels are made from high-impact injection-molded polystyrene (HIPS), which
offers mechanical and ESD protection to packaged devices.
Feature
Measure
Symbol
Size (in)
Size (mm)
Diameter
A
12.992
330.0
Flange
Thickness
W2
W1
N
0.559
0.346
4.016
0.512
0.079
0.795
14.2
8.8
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
102.0
13.0
2.0
C
Hub
B
Key Slit Diameter
D
20.2
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 5000 pieces on a 13” reel.
Notes:
1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481
2. Labels are placed on the flange opposite the sprockets in the carrier tape.
QPQ1031Q Datasheet Rev D | Subject to change without notice
16 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
Handling Precautions
PARAMETER
RATING
STANDARD
Caution!
ESD – Human Body Model (HBM)
Class 1C
ESDA/JEDEC JS-001
ESDA/JEDEC JS-002
IPC/JEDEC J-STD-020
ESD – Charged Device Model (CDM) Class C3
ESD sensitive device
MSL – Moisture Sensitivity Level
Level 3
Solderability
Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes.
Package lead plating: Electrolytic plated Au over Ni
RoHS Compliance
This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment), as amended by Directive 2015/863/EU.
This product also has the following attributes:
•
•
•
•
•
•
Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free
PFOS Free
Pb
QPQ1031Q Datasheet Rev D | Subject to change without notice
17 of 18
www.qorvo.com
QPQ1031Q
Band 1/3 Multiplexer
REVISION HISTORY
Revision
Description
DATE
•
•
Updated spec table, plots and EVB information
Updated specifications based on product yield analysis
A
•
•
•
•
•
•
•
Added EVB details
Updated package marking drawing
General formatting updates
Updated Specification
Added EVB Information
Updated Typical Specification to align with PRD
B
C
D
Aug 20, 2020
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or
liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the
latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to
any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS
INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND
ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
www.qorvo.com
QPQ1031Q Datasheet Rev D | Subject to change without notice
18 of 18
相关型号：
©2020 ICPDF网 联系我们和版权申明