QPQ1060EVB01 [QORVO]

L1 Low Loss GPS SAW Filter;


型号：	QPQ1060EVB01
厂家：	Qorvo
描述：	L1 Low Loss GPS SAW Filter 全球定位系统
文件：	总7页 (文件大小：486K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QPQ1060

L1 Low Loss GPS SAW Filter

General Description

QPQ1060 is a L1 GPS Band Pass Filter in a compact size

for use in any GPS application. Designed for rejection of

unwanted GPS signals, this SAW filter also has excellent

power handling capability for low power transmitters.

Housed in a 1.4 x 1.2 mm laminate with over mold

package, this device allows for a compact and cost

effective diplexer solution for GPS applications.

No matching components are required, making the PCB

design and implementation easy.

1.4 X 1.2 X 0.84 mm

Product Features

•

Usable bandwidth 31 MHz

•

No matching required for operation at 50Ω

Excellent rejection for GPS operation

Functional Block Diagram

High Isolation

High Rejection

Laminate with Over Mold Surface Mount Package

(SMP)

•

Small Size: 1.4 x 1.2 x 0.84mm

Performance is typical across frequency. Please

reference electrical specification table and data plots

for more details.

Applications

• General purpose GPS

Top View

• Communication Systems

Pin Configuration - Single Ended

Pin No. Label

Antenna Input ⁽¹⁾

2, 3, 5

Ground

L1 Output ⁽¹⁾

Ordering Information

( )

¹ Blocking capacitors are required on any ports where a DC

voltage may be present.

Part No.

Description

QPQ1060TR7

7” Taped Reel with 2500 pieces

QPQ1060EVB01

Evaluation board

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

1 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Absolute Maximum Ratings

Minimum Lifetime Ratings

Parameter

Rating

Conditions

Rating

Storage Temperature

-40 to 125°C

RF Input Power ⁽¹⁾,

@ Pin 1 (Antenna Port),

@ Pin 4 (L1 Port)

>10 years @ +95C

Operation Temperature

-55 to 105°C

>5 years @ +105C

RF Input Power ⁽¹⁾- Test conditions:

PW = 200ms; DC = 50% @ +25ꢀ°C

33 dBm

( )

¹ Input Power: CW, 25 dBm

Exceeding any one or a combination of the Absolute Maximum

Rating conditions may cause permanent damage to the device.

Extended application of Absolute Maximum Rating conditions to

the device may reduce device reliability.

( )

¹ Input Power for both Input & Output ports

Electrical Specifications ^(1,2)

L1 Band GPS

Conditions

Parameter ⁽³⁾

Min

Typical ⁽⁴⁾

Max Units

Center Frequency

1559.92 - 1590.92 MHz

1563.42 - 1587.42 MHz

1565.42 - 1585.42 MHz

1559.92 - 1590.92 MHz

1563.42 - 1587.42 MHz

1565.42 - 1585.42 MHz

1559.92 - 1590.92 MHz

1563.42 - 1587.42 MHz

1565.42 - 1585.42 MHz

10 - 1505.42 MHz

1575.42

2.0

0.6

0.5

0.4

MHz

1.3

0.4

Maximum Insertion Loss

Amplitude Variation

Group Delay Variation

Absolute Attenuation

(Relative to 0 dB)

1645.42ꢁ-ꢁ2500 MHz

1559.92 - 1590.92 MHz

1563.42 - 1587.42 MHz

1565.42 - 1585.42 MHz

1559.92 - 1590.92 MHz

1563.42 - 1587.42 MHz

1565.42 - 1585.42 MHz

Single Ended

Input Return Loss

Output Return Loss

Nominal Impedance ⁽⁵⁾

Ohm

Notes:

1. All specifications are based on the Qorvo schematics for the reference designs shown on page 3.

2. In production, devices will be tested at room temperature to a guard banded specification to ensure electrical compliance

over temperature.

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacture

tolerances.

4. Typical values are based on average measurements at room temperature on pcb. (25ꢁ°C ±5ꢁ°C)

5. Optimum impedance to achieve the performance shown.

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

2 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Evaluation Board – QPQ1060-EVB

Notes:

1. All specifications are based on the Qorvo schematics for the reference designs shown on page 4.

2. In production, devices will be tested at room temperature to a guard banded specification to ensure electrical compliance

over temperature.

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacture

tolerances.

4. Typical values are based on average measurements at room temperature on pcb. (25ꢁ°C ±5ꢁ°C)

5. Optimum impedance to achieve the performance shown.

Notes: Blocking capacitors are required on any RF ports where a DC voltage may be present.

Bill of Material – QPQ1060-EVB

Reference Des.

Value

Description

Manuf.

Qorvo

Part Number

DUT

SMA

PCB

L1 Low Loss GPS SAW Filter

SMA connector

QPQ1060

Various

Printed Circuit Board

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

3 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Typical Performances

Test conditions unless otherwise noted: Tempꢁ=ꢁ+25ꢁ°C, 50ꢁΩ system

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

4 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Package Marking and Dimensions

Marking: Qorvo Logo

Part Number – 1060

Trace Code –ꢁAssigned by subcontractor

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012

PCB Mounting Pattern

Notes:

1. All dimensions are in millimeters. Angles are in degrees. .

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

5 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Assembly Notes

1. Compatible with both Lead-free solder (260°C peak reflow temperature) and tin/lead (245°C peak reflow temp.)

soldering processes.

2. Contact plating: ENEPIG

Recommended Soldering Profile

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

6 of 7

www.qorvo.com

QPQ1060

L1 Low Loss GPS SAW Filter

Handling Precautions

Parameter

Rating

Class 3A ESDAꢀ/ꢀJEDEC JS-001

ESDꢁ–ꢁCharged Device Model (CDM) Class C3 ESDAꢀ/ꢀJEDEC JS-002

Standard

ESDꢁ–ꢁHuman Body Model (HBM)

Caution!

ESD-Sensitive Device

MSLꢁ–ꢁMoisture Sensitivity Level

Level 3 IPC/JEDEC J-STD-020

RoHS Compliance

This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment) as amended by Directive 2015/863/EU.

This product also has the following attributes:

• Lead Free

• Halogen Free (Chlorine, Bromine)

• Antimony Free

• TBBP-A (C₁₅H₁₂Br₄0₂) Free

• SVHC Free

• PFOS

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations:

Web: www.qorvo.com

Tel: 1-844-890-8163

Email: customer.support@qorvo.com

Important Notice

The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information

contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All

information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant

information before placing orders for Qorvo products. The information contained herein or any use of such information does

not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether

with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT

CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY

DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED

BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical

components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably

be expected to cause severe personal injury or death.

Data Sheet Rev A, March 31, 2021 | Subject to change without notice

7 of 7

www.qorvo.com

相关型号：