CLPTSK-155.520EL [RALTRON]

LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max, 155.52MHz Nom;


型号：	CLPTSK-155.520EL
厂家：	Raltron Electronics Corporation
描述：	LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max, 155.52MHz Nom 机械振荡器
文件：	总3页 (文件大小：56K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CLOCK

Page 1 of 3

CLP: PLL LVDS SERIES: ULTRA HF CLOCK OSCILLATOR, LVDS, +3.3 VDC

DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling

(LVDS) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a

sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for

today's automated assembly environments.

APPLICATIONS AND FEATURES:

ꢁ

Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches;

Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz

+3.3 VDC LVDS

Frequency Range from 750KHz to 800 MHz

PLL multiplication (F>25MHz)

Miniature Ceramic SMD Package Available on Tape and Reel

Lead Free and ROHS Compliant

ꢂ

ABSOLUTE MAXIMUM RATINGS:

PARAMETER

SYMBOL

VALUE

UNIT

Operating temperature range Ta

-40…+85

-55…+90

°C

Storage temperature range

Supply voltage

T(stg)

°C

Vcc

+4.6

VDC

Maximum Input Voltage

Maximum Output Voltage

Vss-0.5…Vcc+0.5

ꢂ

ELECTRICAL PARAMETERS:

PARAMETER

SYMBOL

TEST CONDITIONS^*1

VALUE

0.75~ 800.00**

UNIT

Nominal Frequency

Supply Voltage

Supply Current

Output Logic Type

Load

MHz

VDC

Vcc

+3.3 ±5%

80.0 MAX

LVDS

Connected between Out and Complementary Out

100

Ω

Voh

Vol

Vod

Output logic high

Output logic low

Differential output

Differential output error

Offset Voltage

1.43 Typ, 1.6 Max

0.9 Min, 1.10 Typ

247 Min, 330 Typ, 454 Max

50 Max

1.125 Min, 1.25 Typ, 1.375 Max

25 Max

VDC

mVDC

Output Voltage Levels

VOS

Offset error

Duty Cycle

Measured at 50% of Vcc

40/60 to 60/40 or 45/55 to 55/45

0.7 TYP 1.0 MAX^*2

Rise / Fall Time

tr / tf

Measured at 20/80% and 80/20% Vcc Levels

Integrated Phase tji RMS,

Fj = 12 kHz…20 MHz⁵

Fo=155.52MHz

Fo=622.08MHz

Fo=155.52MHz. 4 TYP **

Fo=622.08MHz 6 TYP **

Fo=155.52MHz. 30 TYP**

2.6 TYP**

2.5 TYP**

Random period Jitter Rj using

wavecrest analyzer ⁴

Jitter

Acumm. Peak to Peak Jitter Tp-p

using wavecrest analyzer^*4

Fo=622.08MHz

∆f=10 Hz

40 TYP**

-60

∆f=100 Hz

∆f=1 KHz

∆f=10 KHz

∆f=100 KHz

∆f=1M Hz

-90

dBc/Hz

-120

-125

-121

-140

-145

Phase Noise

typ. @155.52MHz⁶

£(∆f)

∆f/fc

∆f=10M Hz

∆f>20M Hz

±20, ±25, ±50, or ±100 MAX^*3

Overall Frequency Stability

Op. Temp., Aging, Load, Supply and Cal. Variations

ppm

Enable High Option;

VDC

Pin 1

Output Enabled

Output Disabled

Dis

High Voltage or No Connect

Ground

0.7•Vcc MIN

0.3•Vcc MAX

Enable Low Option;

VDC

Pin 1

Output Disabled

Output Enabled

Dis

High Voltage

Ground or No Connect

0.7•Vcc MIN

0.3•Vcc MAX

RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19^{t h}St ꢀMiami, Florida 33172 ꢀU.S.A.

phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com

CLOCK

Page 2 of 3

*1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C

*2 Frequency Dependent

*3 Not All Stabilities Available With All Temperature Ranges—Please Consult Factory For Availability

*4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering

*5 Calculated from Agilent 5500 phase noise measurements

*6 Measured with Agilent 5500

ꢂ

PART NUMBERING SYSTEM:

FREQUENCY

STABILITY

(Overall)

TEMPERATURE

RANGE (°C)

FREQUENCY

(MHz)

SERIES

SYMMETRY

Enable/Disable

CLP: UHF +3.3Vdc Clock with LVDS

Comp. Output

A: 40/60 to 60/40%

T: 45/55 to 55/45% S: 0…+70

U: -20…+70

R: 0…+50

0.75…800.000

Enable High – standard

(Omit Suffix)

K: ±20 ppm**

I: ±25 ppm

H: ±50 ppm

J: ±100 ppm

EL; Enable Low

V: -40…+85**

EXAMPLE: -155.520

Clock Oscillator, 7x5mm Package, +3.3 VDC Supply Voltage, LVDS Output, Standard Symmetry, 0…+70°C Operating

Temperature Range, ±50 ppm Total Frequency Stability, 155.520 MHz

** ±20ppm stability may not be available at all combinations, please consult the factory for any custom requirements.

ꢂ

MECHANICAL PARAMETERS:

OUTLINE TOLERANCE:

±0.006” / 0.15mm

INDICATES PIN 1.

(Unless otherwise specified)

PIN FUNCTIONS:

[1] ENABLE/ DISABLE

[2] NO CONNECT

[3] CASE GROUND

[4] OUTPUT

.276 ±.008

7.0 ±0.2

.079 MAX.

2.00 MAX.

[5] COMP. OUTPUT

[6] SUPPLY VOLTAGE

MARKING:

CLPASH

155.52

.200

5.08

.100

2.54

.079 TYP.

2.00 TYP.

RAL D/C

.087

2.20

*0.01µF external by-pass

filter is recommended as seen on solder

pattern.

.055

1.40

TYP.

.071

1.80

.100

2.54

SOLDER PATTERN

RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19^{t h}St ꢀMiami, Florida 33172 ꢀU.S.A.

phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com

CLOCK

Page 3 of 3

ꢀ

REFLOW PROFILE:

**ROHS COMPLIANT**

RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19^{t h}St ꢀMiami, Florida 33172 ꢀU.S.A.

phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com

相关型号：