SE3L-HF-W [RECTRON]
Rectifier Diode, 1 Element, 1A, 150V V(RRM), Silicon, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-2;型号: | SE3L-HF-W |
厂家: | RECTRON SEMICONDUCTOR |
描述: | Rectifier Diode, 1 Element, 1A, 150V V(RRM), Silicon, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-2 |
文件: | 总5页 (文件大小:339K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SE1
THRU
SE6
SURFACE MOUNT SUPER FAST RECTIFIER
VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere
FEATURES
* High reliability
* Low leakage
* Low forward voltage
* High current capability
* Super fast switching speed
* High surge capability
* Good for switching mode circuit
SOD-123F
MECHANICALDATA
* Case: Molded plastic
.114 (2.9)
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
.106 (2.7)
.077 (1.95)
.035 (0.90)
.028 (0.70)
.069 (1.75)
* Weight: 0.016 gram
.008 (0.20)
.053 (1.35)
.047 (1.20)
.030 (0.75)
.022 (0.55)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.150 (3.8)
.142 (3.6)
Dimensions in inches and (millimeters)
O
MAXIMUM RATINGS (@ T
A
=25 C unless otherwise noted)
SYMBOL
SE1
50
SE2
100
70
SE3
150
105
150
SE4
200
140
200
SE5
300
210
300
SE6
400
280
UNITS
Volts
Volts
Volts
RATINGS
VRRM
VRMS
VDC
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
35
50
100
Maximum DC Blocking Voltage
400
Maximum Average Forward Rectified Current
IO
1.0
15
Amps
Amps
O
at T = 55 C
A
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
R
R
130
30
0C/W
0C/W
pF
θ
θ
J A
J L
CJ
TJ
15
10
0 C
150
Storage Temperature Range
TSTG
-55 to + 150
0 C
O
ELECTRICAL CHARACTERISTICS(@T
A
=25 C unless otherwise noted)
CHARACTERISTICS
SYMBOL
VF
SE1
SE2
SE3
SE4
SE5
SE6
UNITS
Volts
µA
Maximum Instantaneous Forward Voltage at 1.0A DC
0.95
1.25
@TA = 25oC
Maximum Average Reverse Current
5
IR
at Rated DC Blocking Voltage
@TA = 100oC
350
35
µA
Maximum Reverse Recovery Time (Note 4)
nSec
trr
2006-12
NOTES : 1. Thermal Resistance :Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant","100% Sn plating (Pb-free)".
4. Test Conditions: I = 0.5A, I = -1.0A, I = -0.25A.
RR
F
R
RATING AND CHARACTERISTICS CURVES ( SE1 THRU SE6 )
trr
+0.5A
50 Ω
NONINDUCTIVE
10 Ω
NONINDUCTIVE
( - )
PULSE
GENERATOR
(NOTE 2)
D.U.T
0
( + )
25 Vdc
(approx)
( - )
-0.25A
1
( + )
OSCILLOSCOPE
(NOTE 1)
NON-
INDUCTIVE
NOTES: 1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
-1.0A
2. Rise Time = 10ns max. Source Impedance =
50 ohms.
1cm
SET TIME BASE FOR 14/1 ns/cm
FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
1.0
0.8
1000
T
= 100 OC
A
100
10
0.6
0.4
T
= 75 OC
A
T
= 25 OC
A
Single Phase
Half Wave 60Hz
Resistive or
1.0
0.1
0.2
0
Inductive Load
0
25
50
75
100
125
150
175
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE, (OC)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.2 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.3 TYPICAL REVERSE
CHARACTERISTICS
RATING AND CHARACTERISTICS CURVES ( SE1 THRU SE6 )
20
10
20
10
8.3ms Single Half Sine-Wave
(JEDED Method)
T
= 25 OC
J
3.0
1.0
SE1~SE4
5
SE5~SE6
0.3
0.1
3
2
0.03
0.01
Pulse Width=300uS
1% Duty Cycle
1
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
1
5
10
50
100
INSTANTANEOUS FORWARD VOLTAGE, (V)
NUMBER OF CYCLES AT 60Hz
FIG.4 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
200
100
T
= 25 OC
J
60
40
SE1~SE4
20
10
SE5~SE6
6
4
2
1
0.1 0.2
0.4
1.0
2
4
10
20
40
100
REVERSE VOLTAGE, (V)
FIG.6 TYPICAL JUNCTION CAPACITANCE
Mounting Pad Layout
0.030 MIN.
(0.75 MIN.)
0.035MIN.
(0.90 MIN.)
0.165
(4.19) REF
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
©2020 ICPDF网 联系我们和版权申明