NESG240033 [RENESAS]
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG); NPN硅锗RF晶体管UHF- BAND ,低噪声,低失真功放3 -PIN MINIMOLD ( 33 PKG )型号: | NESG240033 |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG) |
文件: | 总10页 (文件大小:225K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
NPN SILICON GERMANIUM RF TRANSISTOR
NESG240033
NPN SiGe RF TRANSISTOR FOR
UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION
3-PIN MINIMOLD (33 PKG)
FEATURES
•
The device is an ideal choice for low noise, low distortion amplification.
NF = 0.75 dB TYP. @ VCE = 5 V, IC = 15 mA, f = 1 GHz
PO (1 dB) = 23.5 dBm TYP. @ VCE = 5 V, IC (set) = 40 mA, f = 1 GHz
OIP3 = 35.5 dBm TYP. @ VCE = 5 V, IC (set) = 40 mA, f = 1 GHz
Maximum stable power gain: MSG =13.0 dB TYP. @ VCE = 5 V, IC = 40 mA, f = 1 GHz
SiGe HBT technology (UHS2) : fT = 10.5 GHz
•
•
•
•
•
•
This product is improvement of ESD of NESG2xxx series.
3-pin minimold (33 PKG)
ORDERING INFORMATION
Part Number
NESG240033
Order Number
Package
Quantity
Supplying Form
NESG240033-A
3-pin minimold
50 pcs
• 8 mm wide embossed taping
• Pin 3 (Collector) face the perforation side
of the tape
(33 PKG) (Pb-Free)
(Non reel)
NESG240033-T1B NESG240033-T1B-A
3 kpcs/reel
Remark To order evaluation samples, please contact your nearby sales office.
Unit sample quantity is 50 pcs.
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Collector to Base Voltage
Collector to Emitter Voltage
Collector to Emitter Voltage
Base CurrentNote 1
Symbol
VCBO
VCES
VCEO
IB
Ratings
Unit
V
5.5
13
V
5.5
V
36
mA
mA
mW
°C
°C
Collector Current
IC
400
Note 2
Total Power Dissipation
Junction Temperature
Storage Temperature
Ptot
480
<R>
Tj
150
Tstg
−65 to +150
Notes 1. Depend on the ESD protect device.
2. Mounted on 3.8 cm × 9.0 cm ×0.8 mm (t) glass epoxy PWB
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PU10768EJ02V0DS (2nd edition)
Date Published November 2009 NS
Printed in Japan
2009
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
NESG240033
THERMAL RESISTANCE (TA = +25°C)
Parameter
Symbol
Rthj-a
Ratings
260
Unit
Termal Resistance from Junction to
AmbientNote
°C/W
<R>
Note Mounted on 3.8 cm × 9.0 cm × 0.8 mm (t) glass epoxy PWB
RECOMMENDED OPERATING RANGE (TA = +25°C)
Parameter
Collector Current
Symbol
MIN.
TYP.
40
MAX.
Unit
mA
IC
−
−
<R>
ELECTRICAL CHARACTERISTICS (TA = +25°C)
Parameter
DC Characteristics
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
ICBO
IEBO
VCB = 5 V, IE = 0 mA
−
−
−
−
100
100
260
nA
nA
−
VEB = 0.4 V, IC = 0 mA
VCE = 5 V, IC = 15 mA
Note 1
hFE
140
180
RF Characteristics
Gain Bandwidth Product
Insertion Power Gain
Noise Figure (1)
fT
VCE = 5 V, IC = 40 mA, f = 1 GHz
−
9.5
−
10.5
11.5
0.75
−
−
GHz
dB
⏐S21e⏐2 VCE = 5 V, IC = 40 mA, f = 1 GHz
NF1
NF2
Ga1
Ga2
VCE = 5 V, IC = 15 mA, f = 1 GHz,
ZS = ZSopt, ZL = 50Ω
1.15
dB
Noise Figure (2)
VCE = 5 V, IC = 40 mA, f = 1 GHz,
ZS = ZSopt, ZL = ZLopt
−
9.0
−
0.8
−
−
−
dB
dB
dB
Associated Gain (1)
Associated Gain (2)
VCE = 5 V, IC = 15 mA, f = 1 GHz,
ZS = ZSopt, ZL = 50Ω
11.0
12.0
VCE = 5 V, IC = 40 mA, f = 1 GHz,
ZS = ZSopt, ZL = ZLopt
Note 2
Reverse Transfer Capacitance
Maximum Stable Power Gain
Cre
VCB = 5 V, IE = 0 mA, f = 1 MHz
−
11.0
−
0.9
1.1
−
pF
dB
MSGNote 3 VCE = 5 V, IC = 40 mA, f = 1 GHz
13.0
23.5
Gain 1 dB Compression Output
Power
PO (1 dB)
VCE = 5 V, IC (set) = 40 mA, f = 1 GHz,
ZS = ZSopt, ZL = ZLopt
−
dBm
Output 3rd Order Intercept Point
OIP3
VCE = 5 V, IC (set) = 40 mA, f = 1 GHz,
−
35.5
−
dBm
Δf = 1 MHz, ZS = ZSopt, ZL = ZLopt
Notes 1. Pulse measurement: PW ≤ 350 μs, Duty Cycle ≤ 2%
2. Collector to base capacitance when the emitter grounded.
S21
S12
3. MSG =
hFE CLASSIFICATION
Rank
FB
R7A
Marking
hFE Value
140 to 260
2
Data Sheet PU10768EJ02V0DS
NESG240033
<R>
TYPICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified)
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
REVERSE TRANSFER CAPACITANCE
vs. COLLECTOR TO BASE VOLTAGE
1.4
1.3
1.2
1.1
1.0
0.9
0.8
1 000
3.8 cm × 9.0 cm × 0.8mm (t),
f = 1 MHz
FR–4
500
480
0
0
25
50
75
100
125
(°C)
150
0
1
2
3
4
5
Collector to Base Voltage VCB (V)
Ambient Temperature T
A
COLLECTOR CURRENT vs.
BASE TO EMITTER VOLTAGE
COLLECTOR CURRENT vs.
BASE TO EMITTER VOLTAGE
100
10
100
10
V
CE = 3 V
V
CE = 5 V
1
1
0.1
0.1
0.01
0.001
0.01
0.001
0.0001
0.0001
0.4
0.5
0.6
0.7
0.8
0.9
0.4
0.5
0.6
0.7
0.8
0.9
Base to Emitter Voltage VBE (V)
Base to Emitter Voltage VBE (V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
250
200
150
1700 A
μ
1 500 μA
μ
1 300 A
μ
1 100 A
μ
900 A
700
μ
A
100
50
0
μ
500 A
μ
300 A
μ
I = 100 A
B
0
1
2
3
4
5
Collector to Emitter Voltage VCE (V)
Remark The graphs indicate nominal characteristics.
3
Data Sheet PU10768EJ02V0DS
NESG240033
DC CURRENT GAIN vs.
COLLECTOR CURRENT
DC CURRENT GAIN vs.
COLLECTOR CURRENT
1 000
100
10
1 000
100
10
VCE = 3 V
VCE = 5 V
1
0.1
1
1
100
(mA)
0.1
10
1 000
1
100
(mA)
10
1 000
Collector Current I
C
Collector Current I
C
GAIN BANDWIDTH PRODUCT
vs. COLLECTOR CURRENT
GAIN BANDWIDTH PRODUCT
vs. COLLECTOR CURRENT
20
15
10
5
20
15
10
V
CE = 5 V,
V
CE = 3 V,
f = 1 GHz
f = 1 GHz
5
0
0
1
10
100
1
10
100
Collector Current I
C
(mA)
Collector Current I (mA)
C
Remark The graphs indicate nominal characteristics.
4
Data Sheet PU10768EJ02V0DS
NESG240033
INSERTION POWER GAIN,
MAG, MSG vs. FREQUENCY
INSERTION POWER GAIN,
MAG, MSG vs. FREQUENCY
35
30
25
20
15
10
5
35
30
25
20
15
10
5
V
CE = 3 V,
V
CE = 3 V,
IC
= 10 mA
I
C
= 40 mA
MSG
MAG
MSG
MAG
MAG
MAG
2
MSG
2
|S21e
|
|S21e
|
MSG
0
0.1
0
0.1
10
1
10
1
Frequency f (GHz)
Frequency f (GHz)
INSERTION POWER GAIN,
MAG, MSG vs. FREQUENCY
INSERTION POWER GAIN,
MAG, MSG vs. FREQUENCY
35
30
25
20
15
10
5
35
30
25
20
15
10
5
V
CE = 5 V,
V
CE = 5 V,
I
C
= 40 mA
IC
= 10 mA
MSG
MAG
MSG
MAG
MAG
MAG
2
2
MSG
|S21e
|
|S21e|
MSG
0
0.1
0
1
10
0.1
1
10
Frequency f (GHz)
Frequency f (GHz)
INSERTION POWER GAIN, MAG, MSG
vs. COLLECTOR CURRENT
INSERTION POWER GAIN, MAG, MSG
vs. COLLECTOR CURRENT
20
15
10
5
20
15
10
5
V
CE = 3 V,
V
CE = 5 V,
f = 1 GHz
f = 1 GHz
MSG
MSG
MAG
MAG
2
2
|S21e
|
|S21e|
0
0
1
10
Collector Current I
100
1
10
Collector Current I
100
C
(mA)
C
(mA)
Remark The graphs indicate nominal characteristics.
5
Data Sheet PU10768EJ02V0DS
NESG240033
NOISE FIGURE, ASSOCIATED GAIN
vs. COLLECTOR CURRENT
OUTPUT 3RD ORDER INTERCEPT POINT
vs. COLLECTOR CURRENT
40
4
3
2
16
14
V
CE = 5 V,
V
CE = 5 V,
f1 = 1.000 GHz,
f2 = 1.001 GHz
f = 1 GHz,
G
a
Z
S
= ZSopt, Z = 50 Ω
L
30
12
10
8
20
10
0
6
1
0
4
NF
2
0
1
10
Collector Current I
100
1
10
Collector Current I (mA)
100
C
(mA)
C
EACH OUTPUT POWER, IM
3
OUTPUT POWER, LINEAR GAIN,
COLLECTOR CURRENT vs. INPUT POWER
vs. EACH INPUT POWER
40
40
30
500
V
CE = 5 V,
I
C (set) = 40 mA ,
20
f = 1 GHz
400
30
20
10
P
out
P
out
0
300
200
100
0
–10
–20
–30
–40
G
L
10
IM
3
I
C
V
CE = 5 V,
–50
–60
–70
–80
0
I
C (set) = 40 mA ,
f1 = 1.000 GHz,
f2 = 1.001 GHz
–10
–20
–20
–10
0
10
Input Power Pin (dBm)
20
–10
0
10
20
30
30
Each Input Power Pin (dBm)
Remark The graphs indicate nominal characteristics.
S-PARAMETERS
S-parameters and noise parameters are provided on our Web site in a format (S2P) that enables the direct import
of the parameters to microwave circuit simulators without the need for keyboard inputs.
Click here to download S-parameters.
[RF and Microwave] → [Device Parameters]
URL http://www.necel.com/microwave/en/
6
Data Sheet PU10768EJ02V0DS
NESG240033
PACKAGE DIMENSIONS
3-PIN MINIMOLD (33 PKG) (UNIT: mm)
2.8 0.2
1.5
+0.1
0.65
–0.15
2
1
3
Marking
PIN CONNECTIONS
1. Emitter
2. Base
3. Collector
7
Data Sheet PU10768EJ02V0DS
NESG240033
•
The information in this document is current as of November, 2009. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
•
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E0904E
相关型号:
NESG240033-A
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG)
NEC
NESG240033-FB-A
RF Small Signal Bipolar Transistor, 0.4A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, LEAD FREE, MINIMOLD PACKAGE-3
NEC
NESG240033-T1B
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG)
NEC
NESG240033-T1B
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG)
RENESAS
NESG240033-T1B-A
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN MINIMOLD (33 PKG)
NEC
NESG240033-T1B-A
UHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, LEAD FREE, MINIMOLD PACKAGE-3
RENESAS
NESG240033-T1B-FB-A
RF Small Signal Bipolar Transistor, 0.4A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, LEAD FREE, MINIMOLD PACKAGE-3
NEC
NESG240034
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN POWER MINIMOLD (34 PKG)
NEC
NESG240034
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN POWER MINIMOLD (34 PKG)
RENESAS
NESG240034-A
NPN SiGe RF TRANSISTOR FOR UHF-BAND, LOW NOISE, LOW DISTORTION AMPLIFICATION 3-PIN POWER MINIMOLD (34 PKG)
NEC
©2020 ICPDF网 联系我们和版权申明