NX8567SA537-CC [RENESAS]
LASER DIODE W/MONITOR,1.553UM PEAK WAVELENGTH,MODULE-BF;
| 型号： | NX8567SA537-CC |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | LASER DIODE W/MONITOR,1.553UM PEAK WAVELENGTH,MODULE-BF 监视器 光电 |
| 文件： | 总14页 (文件大小：262K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
PRELIMINARY DATA SHEET
LASER DIODE
NX8567SA Series
EA MODULATOR AND WAVELENGTH MONITOR INTEGRATED
1 550 nm MQW-DFB LASER DIODE MODULE FOR
2.5 Gb/s DWDM ULTRALONG-REACH 240 km, 360 km, 600 km APPLICATIONS
DESCRIPTION
The NX8567SA Series is an Electro-Absorption (EA) modulator and
wavelength monitor integrated, 1 550 nm Multiple Quantum Well (MQW)
structured Distributed Feed-Back (DFB) laser diode module. The module is
capable of 2.5 Gb/s applications of over 240 km, 360 km, 600 km ultralong-
reach and available for Dense Wavelength Division Multiplexing (DWDM)
wavelengths based on ITU-T recommendations, enabling a wide range of
applications.
FEATURES
•
•
•
Integrated electroabsorption modulator
Wavelength monitor function (Etalon filter, Wavelength monitor PD)
Very low dispersion penalty (over 240 km (4320 ps/nm), NX8567SAS Series)
(over 360 km (6480 ps/nm), NX8567SAM Series)
(over 600 km (10800 ps/nm), NX8567SA Series)
Low modulation voltage
•
•
Available for DWDM wavelengths based on ITU-T recommendations
(50 GHz grid, refer to ORDERING INFORMATION)
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PL10185EJ01V0DS (1st edition)
Date Published May 2003 CP(K)
Printed in Japan
NEC Compound Semiconductor Devices 2003
NX8567SA Series
PACKAGE DIMENSIONS (UNIT: mm, unless otherwise specified ±0.2 mm)
15.24
2.54
8.0
5.4
TOP VIEW
4 –
φ
2.67
#7
–
#1
22 MAX.
+
Cooler
PD (P
f)
Thermistor
MOD
7
8
1
LD
PD (λ )
p
14
Fiber
#8
#14
Nose
PIN CONNECTIONS
20.83±0.13
26.04±0.13
Pin
No.
Pin
No.
Function
Thermistor
Thermistor
LD DC Bias (+)
Function
GND
GND
PD (λ
Optical Fiber (SMF)
Length : 900 MIN.
1
2
3
4
5
8
9
10
11
12
p) Anode (–)
PD (P
PD (λ
PD (P
f
) Anode (–)
) and
LD/MOD GND
Signal Input (MOD),
50 Ω RF Input
LD/MOD GND
GND
p
f
) Cathode (+)
29.97±0.25
Cooler (+)
Cooler (–)
6
7
13
14
2
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
OPTICAL FIBER CHARACTERISTICS
Parameter
Mode Field Diameter
Specification
Unit
µm
9.3±0.5
125±1
900±100
< 1 270
< 0.3
Cladding Diameter
µm
Tight Buffer Diameter
Cut-off Wavelength
Attenuation 1 525 to 1 575 nm
Minimum Fiber Bending Radius
Fiber Length
µm
nm
dB/km
mm
mm
30
900 MIN.
Flammability
UL1581 VW-1
35±2 mm
-CC : SC-UPC connector
-BC : FC-UPC connector
Fiber Length: 900 mm MIN.
3
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
ORDERING INFORMATION
NX8567SA
-
CC : SC-UPC connector (standard)
BC : FC-UPC connector (option)
Wavelength code : Refer to Table A
Without : 600 km (10800 ps/nm)
M
S
: 360 km (6480 ps/nm)
: 240 km (4320 ps/nm)
Table A: DWDM wavelengths based on ITU-T recommendations (@ TLD = Tset)
Wavelength Code
ITU-T Wavelength
(nm)
Frequency
(THz)
Wavelength Code
ITU-T Wavelength
Frequency
(THz)
(nm)
287
291
295
299
303
307
311
315
318
322
326
330
334
338
342
346
350
354
358
362
366
370
373
377
381
1528.773
1529.163
1529.553
1529.944
1530.334
1530.725
1531.116
1531.507
1531.898
1532.290
1532.681
1533.073
1533.465
1533.858
1534.250
1534.643
1535.036
1535.429
1535.822
1536.216
1536.609
1537.003
1537.397
1537.792
1538.186
196.10
196.05
196.00
195.95
195.90
195.85
195.80
195.75
195.70
195.65
195.60
195.55
195.50
195.45
195.40
195.35
195.30
195.25
195.20
195.15
195.10
195.05
195.00
194.95
194.90
385
389
393
397
401
405
409
413
417
421
425
429
433
437
441
445
449
453
457
461
465
469
473
477
481
1538.581
1538.976
1539.371
1539.766
1540.162
1540.557
1540.953
1541.349
1541.746
1542.142
1542.539
1542.936
1543.333
1543.730
1544.128
1544.526
1544.924
1545.322
1545.720
1546.119
1546.518
1546.917
1547.316
1547.715
1548.115
194.85
194.80
194.75
194.70
194.65
194.60
194.55
194.50
194.45
194.40
194.35
194.30
194.25
194.20
194.15
194.10
194.05
194.00
193.95
193.90
193.85
193.80
193.75
193.70
193.65
Remark λ monitor slope: Channel frequency for 191.80 THz + 2n × 0.05 THz is assigned on negative slope.
Channel frequency for 191.80 THz + (2n + 1) × 0.05 THz is assigned on positive slope.
n is a positive integer including zero.
4
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
Wavelength Code
ITU-T Wavelength
(nm)
Frequency
(THz)
Wavelength Code
ITU-T Wavelength
Frequency
(THz)
(nm)
485
489
493
497
501
505
509
513
517
521
525
529
533
537
541
545
549
553
557
561
565
569
573
577
581
585
589
593
597
602
606
610
614
618
1548.515
1548.915
1549.315
1549.715
1550.116
1550.517
1550.918
1551.319
1551.721
1552.122
1552.524
1552.926
1553.329
1553.731
1554.134
1554.537
1554.940
1555.343
1555.747
1556.151
1556.555
1556.959
1557.363
1557.768
1558.173
1558.578
1558.983
1559.389
1559.794
1560.200
1560.606
1561.013
1561.419
1561.826
193.60
193.55
193.50
193.45
193.40
193.35
193.30
193.25
193.20
193.15
193.10
193.05
193.00
192.95
192.90
192.85
192.80
192.75
192.70
192.65
192.60
192.55
192.50
192.45
192.40
192.35
192.30
192.25
192.20
192.15
192.10
192.05
192.00
191.95
622
626
630
1562.233
1562.640
1563.047
191.90
191.85
191.80
Remark λ monitor slope: Channel frequency for 191.80 THz + 2n × 0.05 THz is assigned on negative slope.
Channel frequency for 191.80 THz + (2n + 1) × 0.05 THz is assigned on positive slope.
n is a positive integer including zero.
5
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
ABSOLUTE MAXIMUM RATINGS
Parameter
Optical Output Power from Fiber
Forward Current of LD
Reverse Voltage of LD
Forward Voltage of Modulator
Reverse Voltage of Modulator
Forward Current of PD
Reverse Voltage of PD
Cooler Current
Symbol
Ratings
Unit
mW
mA
V
Pf
IFLD
VRLD
VFEA
VREA
IFPD
VRPD
IC
10
150
2.0
1
V
5
1
V
mA
V
10
1.5
A
Cooler Voltage
VC
2.5
V
Operating Case Temperature
Storage Temperature
TC
−5 to +70
−40 to +85
350 (3 sec.)
°C
°C
°C
Tstg
Tsld
Lead Soldering Temperature
6
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
ELECTRO-OPTICAL CHARACTERISTICS
(TLD = Tset, TC = −5 to +70°C, BOL, unless otherwise specified)
Parameter
Laser Set Temperature
Operating Current
Symbol
Tset
Conditions
MIN.
20
TYP.
60
MAX.
35
Unit
°C
*1
Iop
50
80
mA
V
Modulation Center Voltage
Modulation Voltage
Vcenter
Vmod
VFLD
Ith
Under modulation*2
Under modulation*2
IFLD = Iop
−2.0
−0.5
3
2
V
Forward Voltage of LD
Threshold Current
2.0
20
V
7
mA
dBm
Optical Output Power from Fiber
Pf
I
FLD = Iop, TLD = Tset, Under modulation*2
−
5
−
2
(NX8567SAM/SA Series)
IFLD = Iop, TLD = Tset, Under modulation*2
(NX8567SAS Series)
0
+1
Peak Emission Wavelength
Side Mode Suppression Ratio
Extinction Ratio
Rise Time
λp
SMSR
ER
tr
IFLD = Iop, VEA = 0 V, TLD = Tset
1 528
30
ITU-T*3
40
1 564
nm
dB
dB
ps
IFLD = Iop, VEA = 0 V
I
I
I
I
FLD = Iop, Under modulation*2
10
11
FLD = Iop, 20-80%, Under modulation*2
125
125
2.0
Fall Time
tf
FLD = Iop, 80-20%, Under modulation*2
ps
Dispersion Penalty
Isolation
DP
Is
FLD = Iop, Under modulation*2, 4
dB
dB
dB
23
Input Return Loss
S11
IFLD = Iop, VEA = −1 V, 50 Ω,
−8
−5
f = 130 MHz to 2 GHz
IFLD = Iop, VEA = −1 V, 50 Ω,
f = 2 to 2.5 GHz
*1 Tset is set at a certain point between 20 and 35°C for ITU-T grid wavelength
*2 2.48832 Gb/s, PRBS 223−1, VEA = Vcenter ± 1/2Vmod, IFLD = Iop, NEC Test System
Vcenter : a certain point between −2.0 and −0.5 V
Vmod
Iop
: a certain point between 3 V or below
: a certain point between 50 and 80 mA
*3 Available for DWDM wavelengths based on ITU-T recommendations (50 GHz grid).
Please refer to ORDERING INFORMATION.
*4 BER = 10−10, NX8567SAS : 4320 ps/nm (240 km). NX8567SAM : 6480 ps/nm (360 km),
NX8567SA : 10800 ps/nm (600 km)
7
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = Tset, TC = −5 to +70°C, BOL)
Parameter
Monitor Current (Pf Monitor)
Monitor Current (λp Monitor)
Operation Region*1
Symbol
Im (Pf)
Conditions
VRPD = 5 V, IFLD = Iop
MIN.
10
TYP.
MAX.
200
100
75
Unit
µA
Im (λp) VRPD = 5 V, IFLD = Iop, Locking point
5
µA
Im (λ)
25
%
λ1−λ2
90
pm
µA/pm
nA
Discrimination Slope*1
Dark Current
ηλ
ID
VRPD = 5 V, IFLD = Iop, Locking point
VRPD = 5 V, VEA = 0 V
0.24
10
15
Terminal Capacitance
Tracking Error
Ct
γ*2
VRPD = 5 V, f = 1 MHz
pF
I
m
f
(P ) = const.
0.5
dB
*1 Operation region, Discrimination slope, Slope assignment
I
1
– I
2
η
λ
=
[µA/pm]
Im
(λ)
Im (λ)
λ
1
– λ
2
I
m
@100%
@75%
I
m
@100%
@75%
I
1
: I
m
I
2
: I
m
Operation region
Locking point
Operation region
Locking point
I
m
(λ
p)
I
m
(λp)
I
2: I
m
@25%
I
1: I
m
@25%
I
m
@0%
0
I
m
@0%
0
λ (nm)
λ (nm)
λ
1
λ
p
λ
2
λ
1
λ
p
λ
2
Negative Slope
Positive Slope
*2 Tracking Error: γ
P
f
(mW)
T
LD = Tset, T = 25˚C
C
P
op
T
LD = Tset, T = –20 to +70˚C
C
P
f
P
f
γ = 10 log
[dB]
P
op
0
I
m
Im
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TC = −5 to +70°C)
Parameter
Thermistor Resistance
B Constant
Symbol
Conditions
MIN.
9.5
TYP.
10.0
MAX.
10.5
3 550
1.2
Unit
kΩ
K
R
B
TLD = 25°C
3 350
3 450
Cooler Current
IC
TLD = Tset
TLD = Tset
A
Cooler Voltage
VC
2.4
V
8
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
EA MODULATOR INTEGRATED DFB-LD FAMILY
Absolute Maximum
Ratings
Electro-Optical
Characteristics
λp
(nm)
TC
(°C)
Tstg
(°C)
Pf *1
(mW)
Part Number
Application
Package
MIN.
TYP.
NX8560LJ Series
−20 to +70
−40 to +85
−3 dBm
−1 dBm
−1 dBm
−5 dBm
−3 dBm
1 550*2
1 550
1 550
1 550
1 550*2
10 Gb/s: STM-64
10 Gb/s: STM-64
BFY with GPOTM
NX8560MC Series
NX8560MCS Series
NX8560SJ Series
0 to +75
0 to +75
−5 to +70
−40 to +85
−40 to +85
−40 to +85
19-pin mini BFY
19-pin mini BFY
BFY with GPO
10 Gb/s: STM-64
10 Gb/s: STM-64
with λ monitoring PD
NX8564LE Series
NX8565LE Series
NX8566LE Series
NX8567SA Series
−20 to +70
−20 to +70
−20 to +70
−5 to +70
−40 to +85
−40 to +85
−40 to +85
−40 to +85
−5 dBm
−5 dBm
0 dBm
1 550*2
1 550*2
1 550*2
1 550*2
2.5 Gb/s: STM-16, 360 km
2.5 Gb/s: STM-16, 600 km
2.5 Gb/s: STM-16, 240 km
BFY
BFY
BFY
BFY
2.5 Gb/s: STM-16, 600 km
with λ monitoring PD
−5 dBm
NX8567SAM Series
NX8567SAS Series
−5 to +70
−5 to +70
−40 to +85
−40 to +85
−5 dBm
1 550*2
1 550*2
BFY
BFY
2.5 Gb/s: STM-16, 360 km
with λ monitoring PD
2.5 Gb/s: STM-16, 240 km
with λ monitoring PD
0 dBm
*1 Under modulation
*2 Available for DWDM Wavelengths based on ITU-T recommendations
9
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
REFERENCE
Document Name
Document No.
OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE
Opto-Electronics Devices Pamphlet
PX10161E
PX10160E
10
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
• PATENT
USP 4,826,295
CA 1,286,848
EP 143 000
• GPO is a trademark of Gilbert Engineering Co., Inc.
•
The information in this document is current as of May, 2003. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4-0110
11
Preliminary Data Sheet PL10185EJ01V0DS
NX8567SA Series
SAFETY INFORMATION ON THIS PRODUCT
SEMICONDUCTOR LASER
DANGER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
AVOID EXPOSURE-Invisible
OUTPUT POWER
WAVELENGTH
mW MAX
nm
Laser Radiation is emitted from
this aperture
CLASS lllb LASER PRODUCT
A laser beam is emitted from this diode during operation.
Warning Laser Beam
Caution GaAs Products
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
A glass-fiber is attached on the product. Handle with care.
Caution Optical Fiber
• When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part
or fragments.
For further information, please contact
NEC Compound Semiconductor Devices, Ltd.
5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 E-mail: salesinfo@csd-nec.com
NEC Compound Semiconductor Devices Hong Kong Limited
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120
FAX: +82-2-558-5209
http://www.ee.nec.de/
TEL: +49-211-6503-01 FAX: +49-211-6503-487
FAX: +852-3107-7309 E-mail: ncsd-hk@elhk.nec.com.hk
NEC Electronics (Europe) GmbH
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0302-1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明