PS9001-Y-V-AX [RENESAS]
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE, 5-PIN SOP (LSO5 WITH 8mm CREEPAGE DISTANCE) PHOTOCOUPLER;
| 型号： | PS9001-Y-V-AX |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE, 5-PIN SOP (LSO5 WITH 8mm CREEPAGE DISTANCE) PHOTOCOUPLER 输出元件 |
| 文件： | 总16页 (文件大小：859K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
PS9001
R08DS0130EJ0100
Rev.1.00
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE,
Aug 24, 2015
5-PIN SOP (LSO5 WITH 8mm CREEPAGE DISTANCE) PHOTOCOUPLER
DESCRIPTION
The PS9001 is an optically coupled high-speed, active low type isolator containing a GaAlAs LED on the input side and
a photodiode and a signal processing circuit on the output side on one chip.
FEATURES
Long creepage distance (8 mm MIN)
High common mode transient immunity (CMH, CML = 50 kV/s MIN.)
Operating Ambient Temperature (125 C MAX.)
High-speed response (tPHL = 100 ns MAX., tPLH = 100 ns MAX.)
Embossed tape product : PS9001-F3 : 3000 pcs/reel
Pb-Free product
Safety standards
UL approved: No. E72422
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
DIN EN 60747-5-5 (VDE 0884-5) approved (Option)
APPLICATIONS
Measurement equipment
FA Network
Start of mass production
Oct.2015
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 1 of 15
Start of mass production
PS9001
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
Weight: 0.119g (typ.)
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance
MIN.
8.0 mm
8.0 mm
0.15 mm
Outer Creepage Distance
Isolation Distance
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 2 of 15
PS9001
Chapter Title
BLOCK DIAGRAM (Unit: mm)
1
5
4
3
2
SHIELD
LED
ON
Output
L
OFF
H
MARKING EXAMPLE
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 3 of 15
PS9001
Chapter Title
ORDERING INFORMATION
Part Number
Order Number
Solder
Plating
Specification
Packing Style
Safety Standard
Application
Part
Number*1
Approval
PS9001
PS9001-Y-AX
Pb-Free and
Halogen Free
(Ni/Pd/Au)
20 pcs (Tape 20 pcs cut)
Embossed Tape 3 000
pcs/reel
Standard products
(UL,CSA approved)
PS9001
PS9001-F3
PS9001-Y-F3-AX
PS9001-V
PS9001-Y-V-AX
20 pcs (Tape 20 pcs cut)
Embossed Tape 3 000
pcs/reel
UL,CSA approved
DIN EN 60747-5-5
(VDE 0884-5):
2011-11 approved
(Option)
PS9001-V-F3
PS9001-Y-V-F3-AX
Note: *1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
25
Unit
Diode
Forward Current *1
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Power Dissipation
mA
V
VR
5
Detector
VCC
VO
-0.5 to 7
-0.5 to 7
20
V
V
IO
mA
mW
Vr.m.s.
C
PC
100
Isolation Voltage *2
BV
TA
5000
Operating Ambient Temperature
Storage Temperature
40 to +125
55 to +150
Tstg
C
Notes: *1. Reduced to 0.325 mA/C at TA = 85C or more.
*2. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
High Level Input Voltage
Symbol
VF
MIN.
2
TYP.
–
MAX.
0.8
Unit
V
Low Level Input Current
Supply Voltage
IF
8
10
5.0
–
12
mA
V
VCC
TA
4.5
-40
5.5
Operating Ambient Temperature
125
C
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 4 of 15
PS9001
Chapter Title
ELECTRICAL CHARACTERISTICS (TA = 40 to +125C, Vcc=5V unless otherwise specified)
Parameter
Symbol
VF
Conditions
MIN.
TYP. *1 MAX.
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 10 mA, TA = 25C
VR = 3 V, TA = 25C
1.35
1.56
1.75
10
IR
A
pF
A
V
Ct
f = 1 MHz, VF = 0 V, TA = 25C
VCC = VO = 5.5 V, VF = 0.8 V
IF = 4 mA, IOL = 5 mA
30
Detector High Level Output Current
Low Level Output Voltage
IOH
50
0.6
2.0
VOL
ICCH
0.1
1.4
High Level Supply Current
VCC = 5.5 V, IF = 0 mA,
VO = open
mA
Low Level Supply Current
ICCL
IFHL
VCC = 5.5 V, IF = 10mA,
VO = open
1.4
1.2
2.0
4.0
mA
mA
Coupled Threshold Input Voltage
VO = 0.6V,IO = 5mA
(H L)
Propagation Delay Time
(H L) *2
tPHL
IF = 10 mA,
RL = 1.9 k , CL = 15 pF,
VTHHL = 1.5 V, VTHLH = 1.5 V
35
65
30
100
100
ns
ns
ns
Propagation Delay Time
(L H) *2
tPLH
Pulse Width Distortion
(PWD)
tPHL-
50
60
tPLH
Propagation Delay Skew
tpsk
ns
Common Mode
Transient Immunity
at High Level Output *3
CMH
TA = 25C,
50
50
kV/s
IF = 0 mA, VO > 1.5 V,
RL = 1.9 k, VCM = 1.5 kV,
CL = 15 pF
Common Mode
CML
TA = 25C,
kV/s
Transient Immunity
at Low Level Output *3
IF = 10 mA, VO < 1.5 V,
RL = 1.9 k, VCM = 1.5 kV,
CL = 15 pF
Notes: *1.
*2.
Typical values at TA = 25C
Test circuit for tPHL and tPLH
5 V
1.9kΩ
4
0.1 F
μ
15 pF
IF=10mA, PW=10 s, duty =10
μ
%
Remark CL includes probe and stray wiring capacitance.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 5 of 15
PS9001
Chapter Title
*3. Test circuit for common mode transient immunity
1.5 kV
90%
10%
V
V
CM
SW I
F
0
V
V
CC = 5 V
μ
F
0.1
R =
L
1.9kΩ
B
t
r
t
f
m
F
C= 0.01
VO (Monitor)
A
CL = 15 pF
O
VOH
(Switch A : I
F
= 0 mA)
1. V
－
1.5V
＋
CM = 1.5 kV
V
V
B
O
VOL
10mA
=
(S
wit
c
h
:
IF
Remark CL includes probe and stray wiring capacitance.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 6 of 15
PS9001
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.
FORWARD VOLTAGE
100
10
1
30
25
20
85C
50C
100C
125C
25C
-20C
-40C
15
10
0.1
5
0
0.01
0
25
50
75
100
125
150
1
1.5
2
2.5
Ambient Temperature TA (°C)
Forward Voltage VF (V)
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
OUTPUT VOLTAGE vs.
FORWARD CURRENT
2.0
1.5
1.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Vcc = 5.5V
Vcc = 5.5V
ICCL(IF = 10mA)
RL = 1.0kΩ
ICCH(IF = 0mA)
3.9kΩ
1.9kΩ
0.5
0.0
0
1
2
3
4
-50
-25
0
25
50
75
100 125
Ambient Temperature TA (°C)
Forward Current IF (mA)
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
4.0
3.0
2.0
0.5
Vcc = 5.0V
O = 0.6V
Vcc = 5.5V
IF = 4mA
V
0.4
0.3
0.2
IOL = 5mA
IOL = 2mA
1.0
0.0
0.1
0.0
-50
-25
0
25
50
75
100 125
-50 -25
0
25
50
75
100 125
Ambient Temperature TA (°C)
Ambient Temperature TA (°C)
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 7 of 15
PS9001
Chapter Title
PROPAGATION DELAY TIME,
PULSE WIDE DISTORTION
vs. AMBIENT TEMPERATURE
PROPAGATION DELAY TIME
vs. FORWARD CURRENT
100
100
75
Vcc = 5.0V
IF = 10mA
RL = 1.9Kꢀ
Vcc = 5.0V
RL = 1.9Kꢀ
tPLH
tPLH
75
tPHL
50
50
25
tPHL
25
0
|tPLH-tPHL
|
0
-50
-25
0
25
50
75
100 125
5
10
15
20
25
Ambient Temperature TA (°C)
Forward Current IF (mA)
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 8 of 15
PS9001
Chapter Title
TAPING SPECIFICATIONS (UNIT: mm)
Tape Direction
Outline and Dimensions (Taps)
Outline and Dimensions (Reel)
Packing:3000 pcs/reel
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 9 of 15
PS9001
Chapter Title
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
Remark All dimensions in this figure must be evaluated before use.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 10 of 15
PS9001
Chapter Title
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
•
•
•
•
•
•
Peak reflow temperature
260C or below (package surface temperature)
10 seconds or less
60 seconds or less
12030 s
Time of peak reflow temperature
Time of temperature higher than 220C
Time to preheat temperature from 120 to 180C
Number of reflows
Three
Flux
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
•
•
•
•
•
Temperature
Time
260C or below (molten solder temperature)
10 seconds or less
Preheating conditions 120C or below (package surface temperature)
Number of times
Flux
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
•
•
•
Peak Temperature (lead part temperature) 350C or below
Time (each pins)
3 seconds or less
Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
Fluxes
•
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 11 of 15
PS9001
Chapter Title
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance
between the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 12 of 15
PS9001
Chapter Title
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
40/125/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.6 UIORM., Pd 5 pC
UIORM
Upr
Vpeak
Vpeak
1 130
1 808
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM., Pd 5 pC
Upr
2 119
Vpeak
Vpeak
Highest permissible overvoltage
UIOTM
8 000
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
2
400
CTI
II
Tstg
TA
–55 to +150
–40 to +125
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
Psi
175
400
700
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 13 of 15
PS9001
Chapter Title
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 14 of 15
PS9001
Chapter Title
This product uses gallium arsenide (GaAs).
GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0130EJ0100 Rev.1.00
Aug 24, 2015
Page 15 of 15
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
SALES OFFICES
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054-1817, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HAL II Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2016 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
相关型号：
PS9001-Y-V-F3-AX
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE, 5-PIN SOP (LSO5 WITH 8mm CREEPAGE DISTANCE) PHOTOCOUPLER
RENESAS
©2020 ICPDF网 联系我们和版权申明