PS9513-V [RENESAS]
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE;型号: | PS9513-V |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 栅极驱动 输出元件 |
文件: | 总21页 (文件大小:181K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
PHOTOCOUPLER
PS9513,PS9513L1,PS9513L2,PS9513L3
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE
INTELLIGENT POWER MODULE
−NEPOC Series−
8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
DESCRIPTION
The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the
input side and a photo diode and a signal processing circuit on the output side on one chip.
The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width
distortion with operating temperature. It is suitable for IPM drive.
The PS9513L1 is lead bending type for long creepage distance.
The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
The PS9513L3 is lead bending type (Gull-wing) for surface mounting.
FEATURES
PIN CONNECTIONS
•
•
•
•
•
•
•
Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2)
High common mode transient immunity (CMH, CML = 15 kV/μs MIN.)
High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
Maximum propagation delays (tPLH − tPHL = 270 ns TYP.)
Pulse width distortion ( | tPHL − tPLH | = 270 ns TYP.)
Open collector output
(Top View)
1. NC
8
1
5
7
2
6
2. Anode
3. Cathode
4. NC
5. GND
6. VO
7. NC
8. VCC
Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel
: PS9513L3-E3 : 1 000 pcs/reel
3
4
•
•
Pb-Free product
Safety standards
•
•
•
•
•
•
•
•
UL approved: No. E72422
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
BSI approved: No. 8937, 8938
<R>
<R>
SEMKO approved: No. 615433
NEMKO approved: No. P06207243
DEMKO approved: No. 314091
FIMKO approved: No. FI 22827
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option)
APPLICATIONS
•
•
IPM Driver
General purpose inverter
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10679EJ03V0DS (3rd edition)
Date Published September 2009 NS
Printed in Japan
2007, 2009
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS9513,PS9513L1,PS9513L2 PS9513L3
<R>
PACKAGE DIMENSIONS (UNIT: mm)
DIP Type
PS9513
+0.5
–0.25
9.25
7.62
+0.4
–0.2
1.01
+0.5
6.5
–0.1
0 to 15°
2.54
0.5±0.15
0.25
M
0.84±0.15
Lead Bending Type (Gull-wing) For Surface Mount
PS9513L3
+0.5
–0.25
9.25
9.65±0.4
+0.4
–0.2
+0.5
–0.1
1.01
6.5
2.54
0.5±0.15
0.25
0.74±0.25
M
2
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
Lead Bending Type For Long Creepage Distance
PS9513L1
+0.5
–0.25
9.25
10.16
+0.4
–0.2
+0.5
–0.1
1.01
6.5
0 to 15°
2.54
0.84±0.15
0.5±0.15
0.25
M
Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount
PS9513L2
+0.5
9.25
–0.25
11.8±0.4
+0.4
–0.2
+0.5
–0.1
1.01
6.5
2.54
0.5±0.15
0.25
0.9±0.25
M
3
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
PS9513, PS9513L3
PS9513L1, PS9513L2
7 mm
7 mm
8 mm
8 mm
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
0.4 mm
0.4 mm
FUNCTIONAL DIAGRAM
8
6
2
3
5
Shield
LED
ON
Output
L
OFF
H
<R>
MARKING EXAMPLE
No. 1 pin
Mark
Type Number
9513
N 931
Assembly Lot
N
9 31
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L or T)
Rank Code
4
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS9513
PS9513-AX
Pb-Free
Magazine case 50 pcs
Standard products
(UL, CSA, BSI,
PS9513
PS9513L1
PS9513L1-AX
(Ni/Pd/Au)
PS9513L1
PS9513L2
PS9513L3
PS9513L2
PS9513L3
PS9513
PS9513L2
PS9513L2-AX
SEMKO, NEMKO,
DEMKO, FIMKO
PS9513L3
PS9513L3-AX
PS9513L2-E3
PS9513L3-E3
PS9513-V
PS9513L2-E3-AX
PS9513L3-E3-AX
PS9513-V-AX
Embossed Tape 1 000 pcs/reel approved)
Magazine case 50 pcs
DIN EN60747-5-2
PS9513L1-V
PS9513L2-V
PS9513L3-V
PS9513L2-V-E3
PS9513L3-V-E3
PS9513L1-V-AX
PS9513L2-V-AX
PS9513L3-V-AX
PS9513L2-V-E3-AX
PS9513L3-V-E3-AX
(VDE0884 Part2)
Approved (Option)
PS9513L1
PS9513L2
PS9513L3
PS9513L2
PS9513L3
Embossed Tape 1 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
5
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
25
Unit
mA
V
Diode
Forward Current*1
Reverse Voltage
VR
5.0
Detector Supply Voltage
Output Voltage
VCC
VO
−0.5 to +35
−0.5 to +35
15
V
V
Output Current
IO
mA
mW
Vr.m.s.
°C
Power Dissipation*2
Isolation Voltage*3
PC
100
BV
TA
5 000
Operating Ambient Temperature
Storage Temperature
−40 to +100
−55 to +125
Tstg
°C
*1 Reduced to 0.33 mA/°C at TA = 70°C or more.
*2 Reduced to 2.0 mW/°C at TA = 70°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Forward Current
Symbol
IF
MIN.
10
0
TYP.
15
MAX.
20
Unit
mA
V
Output Voltage
Supply Voltage
Input Voltage
VO
30
VCC
VF
4.5
0
30
V
0.8
V
6
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 V, unless otherwise specified)
Parameter
Symbol
VF
Conditions
MIN.
1.3
TYP.*1
1.65
MAX.
2.1
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 10 mA
VR = 3 V
IR
200
μA
pF
V
Ct
V = 0 V, f = 1 MHz, TA = 25°C
IF = 10 mA, IOL = 2.4 mA
30
0.13
1.0
Detector Low Level Output Voltage
High Level Output Current
VOL
IOH
0.6
50
VCC = 30 V, VF = 0.8 V
μA
mA
mA
mA
High Level Supply Current
ICCH
ICCL
IFHL
VCC = 30 V, VF = 0.8 V, VO = open
VCC = 30 V, IF = 10 mA, VO = open
VO = 0.8 V, IO = 0.75 mA
0.6
1.3
1.3
5.0
Low Level Supply Current
0.6
Coupled Threshold Input Current
0.86
(H → L)
Current Transfer Ratio (IC/IF)
Isolation Resistance
CTR
IF = 10 mA, VO = 0.6 V
44
110
%
RI-O
VI-O = 1 kVDC, RH = 40 to 60%,
1011
Ω
TA = 25°C
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz, TA = 25°C
0.7
pF
ns
Propagation Delay Time
(H → L)*2
tPHL
IF = 10 mA, RL = 20 kΩ, CL = 100 pF,
VTHHL = 1.5 V, VTHLH = 2.0 V
250
500
750
650
650
Propagation Delay Time
(L → H)*2
tPLH
520
270
270
Maximum Propagation
Delays
tPLH−tPHL
|tPHL−tPLH|
CMH
−200
Pulse Width Distortion
(PWD)*2
Common Mode
TA = 25°C, IF = 0 mA, VO > 3.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
15
15
kV/μs
kV/μs
Transient Immunity at High
Level Output*3
Common Mode
CML
TA = 25°C, IF = 10 mA, VO < 1.0 V,
VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
Transient Immunity at Low
Level Output*3
7
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
*1 Typical values at TA = 25°C.
*2 Test circuit for propagation delay time
V
CC = 15 V
Pulse input (I
F
= 10 mA)
I
F
(ON)
(ON)
Input
50% I
F
(PW = 10 s,
μ
0.1 μF
R = 20 kΩ
L
Duty cycle = 1/10)
15 V
Input
(monitor)
V
O
(monitor)
Output
CL
= 100 pF
VTHLH = 2.0 V
VTHHL = 1.5 V
47 Ω
GND
V
OL
t
PHL
t
PLH
CL includes probe and stray wiring capacitance.
*3 Test circuit for common mode transient immunity
VCC = 15 V
1.5 kV
0 V
V
CM 90%
10%
SW I
F
0.1 μF
RL = 20 kΩ
t
r
t
f
B
A
V
O
(monitor)
(Switch A: I
V
O
V
OH
C = 100 pF
L
F
= 0 mA)
3.0 V
GND
1.0 V
V
O
V
OL
(Switch B: I
F
= 10 mA)
CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
3. Pins 1, 4 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open.
Also, Pin 7 (which is an NC*1 pin) can either be connected directly to the GND pin on the detector side or left
open.
<R>
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may
degrade the internal noise environment of the device.
*1 NC: Non-Connection (No Connection)
4. Avoid storage at a high temperature and high humidity.
8
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
40
35
30
25
20
15
10
5
150
100
50
0
0
25
50
75
100
(°C)
125
25
50
75
100
(°C)
125
Ambient Temperature T
A
Ambient Temperature T
A
FORWARD CURRENT vs.
FORWARD VOLTAGE
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
100
10
1.20
1.00
0.80
0.60
0.40
0.20
0
V
V
CC = 30 V,
= Open,
= 0.8 V,
= 10 mA
O
I
I
CCH : V
CCL : I
F
F
T
A
= +100°C
+85°C
+50°C
+25°C
0°C
I
CCL
CCH
1
0.1
I
–20°C
–40°C
0.01
1.0
1.2
1.4
1.6
1.8
2.0
(V)
2.2
2.4
–50
–25
0
25
50
75
(°C)
100
Forward Voltage V
F
Ambient Temperature T
A
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
0.6
0.5
0.4
0.3
0.2
0.1
0
5
4
3
2
1
0
V
V
CC = 15 V,
= 0.8 V,
= 0.75 mA
V
CC = 15 V,
= 10 mA,
= 2.4 mA
O
IF
IO
I
O
–50
–25
0
25
50
75
(°C)
100
–50
–25
0
25
50
75
(°C)
100
Ambient Temperature T
A
Ambient Temperature T
A
Remark The graphs indicate nominal characteristics.
9
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
OUTPUT CURRENT vs.
OUTPUT CURRENT vs. FORWARD CURRENT
AMBIENT TEMPERATURE
14
12
10
8
1.10
1.05
1.00
0.95
0.90
I
V
F
= 10 mA,
= 0.6 V
VO = 0.6 V
T
A
= +100°C
+25°C
O
6
–40°C
0.85
0.80
0.75
0.70
4
2
0
5
10
15
(mA)
20
–40 –20
0
20
40
60
(°C)
80
100
Forward Current I
F
Ambient Temperature T
A
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. FORWARD CURRENT
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. SUPPLY VOLTAGE
700
600
500
400
300
200
100
1 800
1 600
1 400
1 200
1 000
800
I = 10 mA,
F
CL
= 100 pF,
RL
= 20 kΩ
t
PLH
t
PLH – tPHL
t
PLH
600
t
PHL
400
V
C
CC = 15 V,
t
PHL
L
= 100 pF,
200
RL
= 20 kΩ
t
PLH – tPHL
0
5
10
15
(mA)
20
0
10
20
30
40
Forward Current I
F
Supply Voltage VCC (V)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
PROPAGATION DELAY TIME vs.
LOAD CAPACITANCE
700
600
500
400
300
200
100
0
1 800
1 600
1 400
1 200
1 000
800
V
CC = 15 V,
= 10 mA,
IF
t
PLH
R
L
= 20 kΩ
t
PLH
PWD
600
t
PHL
t
PHL
V
CC = 15 V,
= 10 mA,
400
IF
200
C
R
L
L
= 100 pF,
= 20 kΩ
–40 –20
0
20
40
60
(°C)
80
100
0
100
200
300
400
(pF)
500
Ambient Temperature T
A
Load Capacitance C
L
Remark The graphs indicate nominal characteristics.
10
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. LOAD RESISTANCE
600
1 200
1 000
800
V
CC = 5 V,
= 10 mA,
t
PLH
V
CC = 15 V,
= 10 mA,
I
F
I
F
500
400
300
200
100
C = 15 pF
L
C = 100 pF
L
t
PLH
t
PLH – tPHL
t
PLH – tPHL
600
400
tPHL
t
PHL
200
0
10
20
30
40
50
0
5
10
15
20
25
Load Resistance R
L
(kΩ)
Load Resistance R (kΩ)
L
Remark The graphs indicate nominal characteristics.
11
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0±0.1
4.0±0.1
+0.1
4.5 MAX.
1.5
–0
4.1±0.1
0.3±0.05
2.05±0.05
10.7±0.1
12.0±0.1
Tape Direction
PS9513L2-E3
Pull-out direction
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
25.5±1.0
29.5±1.0
23.9 to 27.4
Outer edge of
flange
Packing: 1 000 pcs/reel
12
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
Outline and Dimensions (Tape)
2.0±0.1
4.0±0.1
+0.1
1.5
–0
5.3 MAX.
10.3±0.1
4.75±0.1
0.35±0.05
1.55±0.1
12.0±0.1
Tape Direction
PS9513L3-E3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
17.5±1.0
21.5±1.0
15.9 to 19.4
Outer edge of
flange
Packing: 1 000 pcs/reel
13
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
D
A
Part Number
PS9513L2
Lead Bending
A
B
C
D
lead bending type (Gull-wing)
for long creepage distance (surface mount)
10.2
2.54
2.54
1.7
2.2
lead bending type (Gull-wing)
for surface mount
8.2
1.7
2.2
PS9513L3
14
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
15
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between VCC-
GND at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
16
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Speck
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
40/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
1 130
1 695
Vpeak
Upr
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
2 119
Vpeak
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UTR
8 000
2
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
CTI
175
III a
Tstg
TA
–55 to +125
–40 to +100
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
175
400
700
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
17
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
•
The information in this document is current as of September, 2009. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
•
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E0904E
18
Data Sheet PN10679EJ03V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
This product uses gallium arsenide (GaAs).
Caution GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
相关型号:
PS9513-V-AX
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L1
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L1-AX
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L1-V
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L1-V-AX
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L2
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L2-AX
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, PLASTIC, SURFACE MOUNT, DIP-8
NEC
PS9513L2-AX
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
PS9513L2-E3
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 8-PIN DIP PHOTOCOUPLER
CEL
©2020 ICPDF网 联系我们和版权申明