UPG2151TK-A [RENESAS]
UPG2151TK-A;
| 型号： | UPG2151TK-A |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | UPG2151TK-A |
| 文件： | 总14页 (文件大小：254K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
GaAs INTEGRATED CIRCUIT
μPG2151TK
L, S-BAND SPDT SWITCH
DESCRIPTION
The μPG2151TK is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for
mobile phone and another L, S-band application.
This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from
0.5 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
•
Switch control voltage
: Vcont (H) = 1.8 to 5.3 V (2.6 V TYP.)
: Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
•
Low insertion loss
: LINS1 = 0.30 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: LINS2 = 0.35 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: LINS3 = 0.50 dB TYP. @ f = 2.0 to 3.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL1 = 25 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL2 = 18 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL3 = 13 dB TYP. @ f = 2.0 to 3.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Pin (0.1 dB) = +21.0 dBm TYP. @ f = 2.0 GHz, Vcont (H) = 2.6 V, Vcont (L) = 0 V
•
High isolation
•
•
Handling power
High-density surface mounting : 6-pin lead-less minimold package (1.5 × 1.1 × 0.55 mm)
APPLICATIONS
•
•
L, S-band digital cellular or cordless telephone
W-LAN, WLL and BluetoothTM etc.
ORDERING INFORMATION
Part Number
Order Number
μPG2151TK-E2-A
Package
Marking
G4N
Supplying Form
μPG2151TK-E2
6-pin lead-less
minimold
(1511) (Pb-Free)Note
• Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: μPG2151TK
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PG10600EJ01V0DS (1st edition)
Date Published May 2006 NS CP(K)
Printed in Japan
2006
μPG2151TK
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No.
Pin Name
OUTPUT1
GND
(Top View)
(Top View)
(Bottom View)
1
2
3
4
5
6
1
2
3
6
5
4
1
2
3
6
5
4
6
5
4
1
2
3
OUTPUT2
Vcont2
INPUT
Vcont1
TRUTH TABLE
Vcont1
Low
Vcont2
High
Low
INPUT−OUTPUT1
INPUT−OUTPUT2
OFF
ON
ON
High
OFF
ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified)
Parameter
Switch Control Voltage
Input Power
Symbol
Vcont
Pin
Ratings
+6.0Note
Unit
V
+26
dBm
°C
Operating Ambient Temperature
Storage Temperature
TA
−45 to +85
−55 to +150
Tstg
°C
Note ⎪Vcont1 − Vcont2⎪ ≤ 6.0 V
RECOMMENDED OPERATING RANGE (TA = +25°C, unless otherwise specified)
Parameter
Switch Control Voltage (H)
Switch Control Voltage (L)
Symbol
Vcont (H)
Vcont (L)
MIN.
1.8
TYP.
2.6
0
MAX.
5.3
Unit
V
−0.2
+0.2
V
2
Data Sheet PG10600EJ01V0DS
μPG2151TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont (H) = 2.6 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Symbol
LINS1
LINS2
LINS3
ISL1
ISL2
ISL3
RLin
Test Conditions
f = 0.5 to 1.0 GHz
MIN.
TYP.
0.30
0.35
0.50
25
MAX.
Unit
dB
−
−
0.42
0.47
0.65
−
Insertion Loss 2
Insertion Loss 3
Isolation 1
f = 1.0 to 2.0 GHz
f = 2.0 to 3.0 GHz
f = 0.5 to 1.0 GHz
f = 1.0 to 2.0 GHz
f = 2.0 to 3.0 GHz
f = 0.5 to 3.0 GHz
f = 0.5 to 3.0 GHz
−
22
15
10
−
dB
Isolation 2
18
−
Isolation 3
13
−
Input Return Loss
Output Return Loss
20
−
dB
dB
RLout
−
20
−
0.1 dB Loss Compression
Input PowerNote
Pin (0.1 dB) f = 2.0 GHz
+18.0
+21.0
−
dBm
Switch Control Current
Switch Control Speed
Icont
−
−
0.2
1.0
20
μA
μs
tSW
50% CTL to 90/10% RF
−
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of
recommended DC cut capacitor value is less than 100 pF.
3
Data Sheet PG10600EJ01V0DS
μPG2151TK
EVALUATION CIRCUIT
Vcont
1
INPUT
Vcont2
1 000 pF
1 000 pF
C0
6
5
4
1
2
GND
3
C
0
C0
OUTPUT1
OUTPUT2
Remark
C0 : 56 pF
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PG10600EJ01V0DS
μPG2151TK
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
V
cont
2
6pin L2MM SPDT SW
Vc1
OUTPUT2
OUT 1
C2
C2
C1
C1
C3
INPUT
C1
IN
OUT 2
OUTPUT1
Vc2
Vcont
1
USING THE NEC EVALUATION BOARD
Symbol
C1, C2, C3
C4, C5
Values
56 pF
1 000 pF
5
Data Sheet PG10600EJ01V0DS
μPG2151TK
TYPICAL CHARACTERISTICS (TA = +25°C, Vcont (H) = 2.6 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF,
using test fixture, unless otherwise specified)
INPUT-OUTPUT1
INPUT-OUTPUT2
INSERTION LOSS vs. FREQUENCY
INSERTION LOSS vs. FREQUENCY
5
5
4
1: –0.534 dB
1: –0.556 dB
1.0 GHz
1.0 GHz
4
2: –0.678 dB
2: –0.688 dB
1.5 GHz
1.5 GHz
3
3
3: –0.801 dB
3: –0.806 dB
2.0 GHz
2.0 GHz
2
2
4: –0.938 dB
4: –0.947 dB
2.5 GHz
2.5 GHz
1
1
5: –1.067 dB
5: –1.081 dB
3.0 GHz
3.0 GHz
1
1
0
0
–1
–1
–2
–3
–4
–5
2
2
3
3
4
4
5
5
–2
–3
–4
–5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency f (GHz)
Frequency f (GHz)
Remark The graphs indicate nominal characteristics.
Caution These characteristics values include the losses of NEC evaluation board.
6
Data Sheet PG10600EJ01V0DS
μPG2151TK
INPUT-OUTPUT1
ISORATION vs. FREQUENCY
INPUT-OUTPUT2
ISORATION vs. FREQUENCY
50
40
50
40
1:
2:
3:
4:
5:
–24.96 dB
1.0 GHz
–21.36 dB
1.5 GHz
–18.97 dB
2.0 GHz
–17.14 dB
2.5 GHz
–15.14 dB
3.0 GHz
1:
2:
3:
4:
5:
–25.11 dB
1.0 GHz
–21.51 dB
1.5 GHz
–19.13 dB
2.0 GHz
–17.29 dB
2.5 GHz
–15.55 dB
3.0 GHz
30
30
20
20
10
10
0
0
–10
–20
–30
–40
–50
–10
–20
–30
–40
–50
1
1
5
5
4
4
3
3
2
2
0.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency f (GHz)
Frequency f (GHz)
INPUT-OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
INPUT-OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
50
50
1:
2:
3:
4:
5:
–35.68 dB
1.0 GHz
–31.34 dB
1.5 GHz
–28.09 dB
2.0 GHz
–28.09 dB
2.5 GHz
–31.87 dB
3.0 GHz
1:
2:
3:
4:
5:
–33.53 dB
1.0 GHz
–34.10 dB
1.5 GHz
–31.36 dB
2.0 GHz
–30.21 dB
2.5 GHz
–30.48 dB
3.0 GHz
40
40
30
30
20
20
10
10
0
0
–10
–20
–30
–40
–50
–10
–20
–30
–40
–50
1
1
3
4
4
5
2
3
5
2
2.0
3.0
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.5
3.5
0.5
Frequency f (GHz)
Frequency f (GHz)
INPUT-OUTPUT1
INPUT-OUTPUT2
OUTPUT RETURN LOSS vs. FREQUENCY
OUTPUT RETURN LOSS vs. FREQUENCY
50
50
1:
2:
3:
4:
5:
–29.61 dB
1.0 GHz
–28.18 dB
1.5 GHz
–27.22 dB
2.0 GHz
–29.01 dB
2.5 GHz
–33.85 dB
3.0 GHz
1:
2:
3:
4:
5:
–31.11 dB
1.0 GHz
–30.20 dB
1.5 GHz
–28.15 dB
2.0 GHz
–27.69 dB
2.5 GHz
–28.66 dB
3.0 GHz
40
30
40
30
20
20
10
10
0
0
–10
–20
–30
–40
–50
–10
–20
–30
–40
–50
1
1
3
4
3
2
5
4
2
5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency f (GHz)
Frequency f (GHz)
Remark The graphs indicate nominal characteristics.
7
Data Sheet PG10600EJ01V0DS
μPG2151TK
OUTPUT POWER vs. INPUT POWER
+35
+30
+25
+20
+15
+10
+5
f = 2.0 GHz
0
–5
–5
0
+5 +10 +15 +20 +25 +30
Input Power Pin (dBm)
+35
Remark The graph indicates nominal characteristics.
8
Data Sheet PG10600EJ01V0DS
μPG2151TK
PACKAGE DIMENSIONS
6-PIN LEAD-LESS MINIMOLD (1511) (UNIT: mm)
(Top View)
(Bottom View)
1.1 0.1
0.2 0.1
0.9 0.1
1.3 0.05
9
Data Sheet PG10600EJ01V0DS
μPG2151TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Soldering Conditions
Condition Symbol
IR260
Peak temperature (package surface temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120 30 seconds
: 3 times
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Wave Soldering
Partial Heating
Peak temperature (molten solder temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
WS260
HS350
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (terminal temperature)
Soldering time (per side of device)
: 350°C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Maximum chlorine content of rosin flux (% mass)
Caution Do not use different soldering methods together (except for partial heating).
10
Data Sheet PG10600EJ01V0DS
μPG2151TK
Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A.
•
The information in this document is current as of May, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
11
Data Sheet PG10600EJ01V0DS
μPG2151TK
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303
FAX: +852-3107-7309
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120 FAX: +82-2-558-5209
Taipei Branch Office
Korea Branch Office
NEC Electronics (Europe) GmbH
http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604
相关型号：
UPG2151TK-E2-A
500 MHz - 3000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 0.65 dB INSERTION LOSS, 1.50 X 1.10 MM, 0.55 MM HEIGHT, LEAD FREE, LEAD LESS MINIMOLD (1511), 6 PIN
RENESAS
©2020 ICPDF网 联系我们和版权申明