RFLA9002SR [RFMD]
Dual Low Noise Amplifier Module 698MHz to 960MHz;型号: | RFLA9002SR |
厂家: | RF MICRO DEVICES |
描述: | Dual Low Noise Amplifier Module 698MHz to 960MHz |
文件: | 总11页 (文件大小:983K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RFLA9002
Dual Low Noise Amplifier Module
698MHz to 960MHz
Package: MCM, 24-pin,
4.0mm x 4.0mm
RFMD’s RFLA9002 is a dual Low Noise Amplifier module with
external connections to both LNAs. These LNAs feature a
shutdown mode to turn off the LNA and provide up to 15dBm drive
level without gain expansion and self-biasing in shutdown mode.
Noise figure of 1.0dB and P1dB of 0dBm makes this component
ideal for receiver input lineups. The RFLA9002 is packaged in a
small 4.0mm x 4.0mm leadless laminate MCM. This module is
internally matched to 50Ω on all RF ports making it easy to use
Features
■
■
■
Frequency Range 698MHz to
960MHz
Internally Matched to 50Ω on All
RF Ports
Shutdown Mode with +40dB
Isolation
■
■
■
■
Gain = 16dB per LNA
with no use with no external matching components required.
Noise Figure of 1.0dB Typical
Single +4.0V Supply
Small 24-Pin, 4.0mm x 4.0mm,
Multi-Chip Module (MCM)
24
23
22
21
20
19
Applications
RF_OUT2
1
2
3
4
5
6
18 RF_IN2
■
Cellular Repeaters and Booster
LNA2
17
Amps
16
■
■
General Purpose LNA
ISM Band LNA
15
LNA1
9
14
RF_IN1
13 RF_OUT1
7
8
10
11
12
Functional Block Diagram
Ordering Information
RFLA9002SQ
Sample bag with 25 pieces
7" Reel with 100 pieces
13" Reel with 2500 pieces
RFLA9002SR
RFLA9002TR13
RFLA9002PCK-410
698MHz to 960MHz PCBA with 5-piece sample
bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140117
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 11
Absolute Maximum Ratings
Caution! ESD sensitive device.
Parameter
Rating
+5.5
Unit
Supply Voltage
VDC
VDC
mA
mW
dBm
°C
Control Voltage
DC Supply Current
Power Dissipation
Max RF Input Power
+5.5
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
140
770
15
-40 to +85
-40 to +150
150
Operating Temperature (TCASE
)
Storage Temperature
°C
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
°C
Max Junction Temperature (TJ)
ESD Rating - Human Body Model (HBM)
Moisture Sensitivity Level
1000 (Class 1C)
MSL3
V
Nominal Operating Parameters
Specification
Min Typ Max
Parameter
Unit Condition
Individual LNA Performance
Frequency Range
Gain (On Mode)
T = 25°C, VCC = 4V, Standard Application Circuit
698
16
960
19.5
1.4
MHz
17.5
1.0
0
dB
dB
SD = 0V
698MHz
Noise Figure
Input P1dB
-5
-3
dBm
dBm
dBm
dB
0
880MHz and 960MHz
Input IP3
1.5
5
Gain (Off Mode)
Gain Delta
-43
SD = 4V
>40
dB
Gain LNA (on mode) – Gain LNA (off mode)
Input Return Loss
Output Return Loss
Isolation (LNA1 OUT to LNA2 IN)
Gain Compression Slope
Overall Power Supply
Supply Voltage
SD Voltage
13
13.5
45
dB
SD = 0V
dB
39
dB
-1.1
-1
-0.1
dB
Gain compresses monotonically with increased input power once saturated
T = 25°C, VCC = 4V, Standard Application Circuit
3.5
0
4
5
V
V
V
V
VCC
VCC
0.6
Logic High
1.7
0
Logic Low
Thermal Resistance
Current
139
12
1
°C/W 85°C at 4.5V at 35mA of current
8
20
3
mA
mA
On Mode, SD = 0V
Off Mode, SD = 4V
0.01
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140117
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 11
RFLA9002
Typical Performance: T=25°C, VDD = 4V unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 11
RFLA9002
Typical Performance: T=25°C, VDD = 4V unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 11
RFLA9002
Evaluation Board Schematic
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 11
RFLA9002
Evaluation Board Bill of Materials (BOM)
Description
Reference Designator
Manufacturer
Manufacturer's P/N
Evaluation Board
DDI
LA9002-410(1)
RFLA9002
RFLA9002 Module
U1
RFMD
CAP, 1µF, 10%, 16V, X7R, 0402
C1-C4
J1-J4
Murata Electronics
Heilind Electronics
GRM155R71C104KA88D
PER MAT-21-1038
CONN, SMA, END LNCH, UNIV, HYB
MNT, FLT
RES, 0Ω, 0402
R5-R6
P1
Kamaya, Inc.
ITW Pancon
RMC1/16SJPTH
MPSS100-5C
CONN, HDR, ST, PLRZD, 9-PIN
DNP
R1-R4*, R7-R9*
Note: Parts with * following the Reference Designators should not be populated on PCBA.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
6 of 11
RFLA9002
Evaluation Board Assembly Drawing
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 11
RFLA9002
Pin Names and Descriptions
Pin
1
Name
RF_OUT2
GND
Description
RF Output; Internally 50Ω matched and DC blocked
2
Connect to low inductance path to ground
Connect to low inductance path to ground
Connect to low inductance path to ground
Connect to low inductance path to ground
RF Input; Internally 50Ω matched and DC blocked
3
GND
4
GND
5
GND
6
RF_IN1
GND
7
Connect to low inductance path to ground
Connect to low inductance path to ground
Shut down pin for LNA1
8
GND
9
SD1
Connection for external resistor to raise current when connected from this pad to VDD and to lower current
when connected from this pad to ground
10
VPAR1
11
12
13
14
15
16
17
18
19
20
VDD
GND
VDD supply, 10nF decoupling internal, supply for LNA1
Connect to low inductance path to ground
RF Output; Internally 50Ω matched and DC blocked
RF_OUT1
GND
Connect to low inductance path to ground
Connect to low inductance path to ground
Connect to low inductance path to ground
Connect to low inductance path to ground
RF Input; Internally 50Ω matched and DC blocked
GND
GND
GND
RF_IN1
GND
Connect to low inductance path to ground
Shut down pin for LNA2
SD2
Connection for external resistor to raise current when connected from this pad to VDD and to lower current
when connected from this pad to ground
21
VPAR2
22
23
24
VDD2
GND
GND
VDD supply, 10nF decoupling internal, supply for LNA2
Connect to low inductance path to ground
Connect to low inductance path to ground
Truth Table
SD1
SD2
LNA1 On
LNA1 Off
LNA2 On
LNA2 Off
0
1
X
X
0
1
X
X
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 11
RFLA9002
Package Outline Drawing (Dimensions in millimeters)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
9 of 11
RFLA9002
Stencil Drawing (Dimensions in millimeters)
Pin Out
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 11
RFLA9002
Branding Diagram
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140117
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
11 of 11
相关型号:
©2020 ICPDF网 联系我们和版权申明