RFPA0802SQ [RFMD]
Integrated Power Amplifier 700MHz to 950MHz;
| 型号： | RFPA0802SQ |
| 厂家： | 
RF MICRO DEVICES |
| 描述： | Integrated Power Amplifier 700MHz to 950MHz |
| 文件： | 总13页 (文件大小：962K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RFPA0802
RFPA0802
RFPA0802
Integrated Power Amplifier
700MHz to 950MHz
Package: MCM, 10-pin,
2.0mm x 2.5mm x 0.9mm
The RFPA0802 has over 28dB of small signal gain over 700MHz
to 950MHz. When used with DPD at 3.3V, the RFPA0802 can
deliver 24dBm LTE Downlink (CFR 7.5dB) with ACPR <-50dBc.
Two digital control pins select high, medium or low power modes if
desired to optimize performance and current drain at different
power levels. The RFPA0802 has an integrated directional
coupler, integrated biasing circuitry, and integrated matching to
50Ω. No external DC blocking is required as the RF pins are at
DC ground.
Features
■
POUT = 24dBm, 26% PAE, with
3.3V, 20MHz LTE DL, CFR 7.5dB
■
■
ACP <-50dBc with DPD
28dB Gain over 700MHz to
950MHz
■
■
Instantaneous P3dB = 32dBm at
3.3V
Designed to Support Flexible VCC
0.5V to 4.5V for PAE Optimization
■
■
■
■
■
■
■
■
Envelope Tracking Compatible
Integrated Power Coupler
Integrated 50Ω Matching
Integrated Biasing
VBAT
RF IN
1
2
3
4
5
10
9
VCC
RF OUT
CPL IN
GND
No External DC Block Needed
3 Power Mode Operation
GPIO Interface
8
VMODE1/GND
VMODE0
VEN
Bias,
Ultra Small and Low Profile
mode &
enable
controls
7
Applications
■
6
CPL OUT
Power Amplifier, Power Amplifier
Driver
Functional Block Diagram
■
■
■
■
Small Cell Base Stations
Wideband Instrumentation
Customer Premise Equipment
Data Cards
Ordering Information
RFPA0802SQ
Sample bag with 25 pieces
RFPA0802SR
7" Reel with 100 pieces
7" Reel with 2500 pieces
RFPA0802TR7
RFPA0802PCK-410
700MHz to 950MHz PCBA with 5-piece sample
bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150209
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 13
RFPA0802
Absolute Maximum Ratings
Caution! ESD sensitive device.
Parameter
Rating
6.0
Unit
V
Supply Voltage in Standby Mode
Supply Voltage in Idle Mode
6.0
V
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Supply Voltage in Operating Mode
Supply Voltage, VBATT
6.0
V
6.0
V
3.5
V
Control Voltage, VEN, VMODE0, VMODE1
RF – Input Power (CW, VCC = 3.3V, 50Ω Load)
RF – Output Power (CW, 50Ω Load)
+10
+30
dBm
dBm
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Output Load VSWR (LTE DL 7.5dB CFR, VCC = 4.5V,
PFORWARD <24dBm)
8:1
ESD Rating, All Pins, HBM, JESD22-A114
ESD Rating, All Pins, CDM, JESD22-C101
Moisture Sensitivity Level
2000
1000
MSL3
V
V
Recommended Operating Condition
Specification
Parameter
Unit
Max
+85
Min
Typ
+25
Operating Temperature Range
Operating Junction Temperature
VBATT
-30
°C
°C
V
125
+3
+3.3
+3.3
+4.5
1
+0.5
+4.5
V
VCC
Note: VCC down to 0.5V may be used for backed-off power when using DC-DC converter to conserve battery current
Nominal Operating Parameters
Specification
Parameter
Unit
Condition
Min Typ Max
General Performance
Operating Frequency
VEN, Low Level
700
0
950
0.5
3
MHz
V
PA Disabled
PA Enabled
1.5
0
1.8
V
VEN, High Level
For logic “low”
For logic “high”
0.5
3
V
VMODE0, VMODE1, Low Level
VMODE0, VMODE1, High Level
1.8
24
37
1.5
V
1, 2
dBm
High power mode (HPM); VCC = 3.3V
Maximum Linear Output POUT
Thermal Resistance
°C/W To backside of evaluation board
Notes:
1. For operation at VBATT = 3.0V, de-rate POUT by 2.0dB
2. POUT is specified for 20MHz LTE downlink with CFR 7.5dB, -50dBc ACPR using digital or analog predistortion
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150209
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 13
RFPA0802
Specification
Parameter
Unit
Condition
Min Typ Max
Unless Otherwise Specified: Temp = 25°C, VBATT = +3.3V,
Band 5 Downlink Electrical
Specifications
VEN = +1.8V, Freq = 881MHz, 50Ω, 20MHz LTE DL with 7.5dB CFR
25
21
15
28
24.5
18
31
27
21
dB
dB
High Power Mode (HPM), POUT = 24dBm, VCC = 3.3V
Medium Power Mode (MPM), , POUT = 14dBm, VCC = 1.5V
Low Power Mode (LPM), POUT = 3dBm, VCC = 0.8V
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V
Gain
dB
-34
-50
-43
-60
26
dBc
dBc
ACLR 1
ACLR 2
dBc
dBc
%
PA Efficiency (PAE)
PA Current Drain
291
118
84
mA
HPM, POUT = 24dBm, VCC = 3.3V
mA
HPM, VCC = 3.3V
mA
PA Quiescent Current
MPM, VCC = 1.5V
40
mA
LPM, VCC = 0.8V
Noise Figure
Input Impedance
IM3
3.7
1.4:1
-20
dB
VSWR
dBm
2:1
No external matching, POUT ≤ 24dBm, all modes
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
CW POUT ≤ 24dBm, all power modes
IM5
-20
-13
-15
0.1
0.1
dBm
dBm
dBm
mA
Harmonics 2f0
Harmonics 3f0
Enable Current
Mode Current
Leakage Current
CW POUT ≤ 24dBm, all power modes
Sources or sink current, VEN = 1.8V
mA
Source or sink current, VMODE0, VMODE1 = 1.8V
DC only; VCC = VBATT = 4.5V, VEN = VMODE0 =VMODE1 = 0V
µA
5
DC only; Time from VEN = high to stable idle current (90% of steady state
value)
DC Enable Time
10
µs
RF Rise/Fall Time
Coupling Factor
µs
10
POUT ≤ 24dBm, all modes, 90% of target, DC settled prior to RF
POUT ≤ 24dBm, all modes
18.5
dB
16.5
-0.5
-0.8
20.5
Coupling Accuracy – Temp /
Voltage
POUT ≤ 24dBm, all modes 30°C ≤ T ≤ 85°C , VCC as required, referenced to
25°C, 3.3V conditions
0.5
0.8
-60
dB
dB
Coupling Accuracy – VSWR
POUT ≤ 24dBm, all modes, load VSWR = 2.5:1
Output Load VSWR Stability
(Spurious Emissions)
dBc
POUT ≤ 24dBm, all conditions, load VSWR = 8:1, all phase angles
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 13
RFPA0802
Specification
Parameter
Unit
Condition
Min Typ Max
Unless Otherwise Specified: Temp = 25°C, VBATT = +3.3V,
Band 8 Downlink Electrical
Specifications
VEN = +1.8V, Freq = 950MHz, 50Ω, 20MHz LTE DL with 7.5dB CFR
24.5
21.5
14
27.5
24.5
17
30.5
27.5
20
dB
dB
High Power Mode (HPM), POUT = 24dBm, VCC = 3.3V
Medium Power Mode (MPM), POUT = 14dBm, VCC = 1.5V
Low Power Mode (LPM), POUT = 3dBm, VCC = 0.8V
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V, without DPD
HPM, POUT = 24dBm, VCC = 3.3V, with DPD
HPM, POUT = 24dBm, VCC = 3.3V
Gain
dB
-34
-50
-43
-60
25
dBc
dBc
ACLR 1
ACLR 2
dBc
dBc
%
PA Efficiency (PAE)
PA Current Drain
Noise Figure
Input Impedance
IM3
298
3.7
mA
HPM, POUT = 24dBm, VCC = 3.3V
dB
1.6:1
-20
-20
-15
-19
VSWR
dBm
dBm
dBm
dBm
2:1
No external matching, POUT ≤ 24dBm, all modes
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
Two tones passed 600kHz, HPM, Total POUT ≤ 24dBm, VCC = 3.3V
CW POUT ≤ 24dBm, all power modes
IM5
Harmonics 2f0
Harmonics 3f0
CW POUT ≤ 24dBm, all power modes
Enable Current
Mode Current
0.1
0.1
mA
mA
µA
Sources or sink current, VEN = 1.8V
Source or sink current, VMODE0, VMODE1 = 1.8V
DC only; VCC = VBATT = 4.5V, VEN = VMODE0 =VMODE1 = 0V
Leakage Current
5
DC only; Time from VEN = high to stable idle current (90% of steady state
value)
DC Enable Time
10
µs
RF Rise/Fall Time
Coupling Factor
µs
10
20
POUT ≤ 24dBm, all modes, 90% of target, DC settled prior to RF
POUT ≤ 24dBm, all modes
18
dB
16
Coupling Accuracy – Temp /
Voltage
POUT ≤ 24dBm, all modes 30°C ≤ T ≤ 85°C , VCC as required, referenced to
25°C, 3.3V conditions
-0.5
-0.8
0.5
0.8
-60
dB
dB
Coupling Accuracy – VSWR
POUT ≤ 24dBm, all modes, load VSWR = 2.5:1
Output Load VSWR Stability
(Spurious Emissions)
dBc
POUT ≤ 24dBm, all conditions, load VSWR = 8:1, all phase angles
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 13
RFPA0802
Mode Control Table
Mode of Operation
VEN
VMODE0
VMODE1
VCC
Power Down
Low
Low
High
High
High
Low
X
Low
X
X
Standby Mode
On
On
On
On
High Power Mode (HPM)
Medium Power Mode (MPM)
Low Power Mode (LPM)
Low
High
High
Low
Low
High
Typical Application Schematic 700MHz to 950MHz Application Circuit
VBAT
VCC
10nF
4.7µF
22µF
1nF
4.7µF
U1
1
10
9
RF_IN
VMODE1
VMODE0
VEN
RF_OUT
CPL_IN
2
3
4
5
8
1nF
Bias,
mode &
enable
controls
7
6
CPL_OUT
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 13
RFPA0802
Typical Performance: VCC = 3.3V unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
6 of 13
RFPA0802
ACP with DPD, LTE DL 7.5dB CFR VCC = 3.3V, ICC = 283mA, 881MHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 13
RFPA0802
ACP with DPD, LTE DL 7.5dB CFR VCC = 3.3V, ICC = 320mA, 950MHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 13
RFPA0802
Evaluation Board Schematic 700MHz to 950MHz Application Circuit
VBAT
VCC
C5
4.7µF
C7
1nF
C8
10nF
C6
4.7µF
C4
22µF
R1
DNI
U1
1
RF_IN
J1
RF_OUT
J2
10
9
2
3
4
5
CPL_IN
J4
VMODE1
C9
1nF
C3
8
DNI
R2
DNI
C12
DNI
Bias,
mode &
enable
controls
7
VMODE0
VEN
C10
DNI
C2
DNI
CPL_OUT
J3
6
C11
DNI
C1
DNI
GND
VEN
VMODE0
VMODE1
VBAT
P1_1
P1_2
P1_3
P1_4
P1_5
P1_6
P1_7
P1_8
P1_9
GND
VCC
VCC_S
GND
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
9 of 13
RFPA0802
Evaluation Board Bill of Materials (BOM) 700MHz to 950MHz Application Circuit
Description
Reference Designator
Manufacturer
Manufacturer's P/N
DUT
U1
C4
RFMD, Inc.
RFPA0802
CAP, 22µF, 10%, 10V, TANT-A
CAP, 4.7µF, 10%, 6.3V, X5R, 0805
CAP, 1000pF, 10%, 50V, X7R, 0402
CAP, 10000pF, 10%, 25V, X7R, 0402
AVX Corporation
TAJA226K010RNJ
C5-C6
C7, C9
C8
Taiyo Yuden (USA), Inc.
Taiyo Yuden (USA), Inc.
Taiyo Yuden (USA), Inc.
CE MJK212 BJ475KD-T
RM UMK105BJ102KV-F
RM TMK105BJ103KV-F
CONN, SMA, EL MINI FLT 0.048”
J1-J4
Amphenol RF Asia Corp.
ITW Pancon
901-10362
SPE-000311
CONN, HDR, ST, PLRZD, 9-PIN
Do Not Place
P1
MPSS100-9-C
C1-C3, C10-C12, R1-R2
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 13
RFPA0802
Evaluation Board Assembly Drawing 700MHz to 950MHz Application Circuit
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
11 of 13
RFPA0802
Pin Names and Descriptions
Pin
1
Name
VBATT
Description
Supply Voltage for bias circuitry
2
RFIN
RF Input; Connect to 50Ω nominally, presents as DC ground.
3
VMODE1/GND
VMODE0
VEN
Digital control input for power mode selection. Connect to GND if HPM and MPM only operations.
4
Digital control input for power mode selection
5
Digital control input for enable/disable of PA
6
CPL_OUT
GND
Coupler Output
7
Ground
8
CPL_IN
RFOUT
VCC
Coupler Input
9
RF Output; Connect to 50Ω nominally, present as DC ground
Supply voltage for PA stages which can be connected to battery supply or output of DC-DC converter
10
Ground Connection; This package backside should be soldered toa topside ground pad connecting to the PCB
ground plane with multiple ground via. The pad should have a low thermal resistance and low electrical
impedance to the ground plane.
PCK BASE
GND
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
12 of 13
RFPA0802
Package Outline (Dimensions in millimeters)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS150209
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
13 of 13
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明