RVA3007LSR [RFMD]
ANALOG CONTROLLED VARIABLE GAIN AMPLIFIER;型号: | RVA3007LSR |
厂家: | RF MICRO DEVICES |
描述: | ANALOG CONTROLLED VARIABLE GAIN AMPLIFIER 放大器 |
文件: | 总9页 (文件大小:973K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RVA3007LAna-
log Controlled
Variable Gain
Amplifier
RVA3007L
ANALOG CONTROLLED VARIABLE GAIN
AMPLIFIER
Package: MCM, 7mm x7mm
VCTRL
8
Features
2440MHz to 2750MHz
Operation
Voltage
Variable
Attenuator
Gain=28dB Typical
1
7
RF OUT
RF IN
Gain Adjustment Range
>19dB
ACPR=-64dBc Typ. at
+12dBm P
WCDMA)
(Dual Carrier
OUT
2
3
4
5
6
Small, 7mmx7mm,
Multi-Chip Module
Applications
Functional Block Diagram
Cellular, 3G and 4G
Infrastructure
Product Description
RFMD’s RVA3007L is a fully integrated analog controlled variable gain
amplifier featuring exceptional linearity over a greater than 19dB gain
control range. This variable gain amplifier is controlled by a single 0V to
3.3V positive supply voltage. The RVA3007L is packaged in a small
7mmx7mm leadless laminate MCM which contains solid thermal vias for
ultra low thermal resistance. This module is internally matched to 50
and is easy to use with no external matching components required.
WiBro, WiMax, LTE
Microwave Radio
High Linearity Power Control
Ordering Information
RVA3007LSQ
RVA3007LSR
RVA3007LTR7
RVA3007LTR13
Sample bag with 25 pieces
7” Sample reel with 100 pieces
7” Reel with 1500 pieces
13” Reel with 2500 pieces
RVA3007LPCK-410 2440MHz to 2750MHz PCBA with 5-piece sample bag
Optimum Technology Matching® Applied
GaAs HBT
GaAs MESFET
InGaP HBT
SiGe BiCMOS
Si BiCMOS
SiGe HBT
GaAs pHEMT
Si CMOS
Si BJT
GaN HEMT
RF MEMS
LDMOS
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade-
mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS111014
1 of 9
RVA3007L
Absolute Maximum Ratings
Caution! ESD sensitive device.
Parameter
Max Device Current
Rating
770
5.5
Unit
mA
V
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
Max Device Voltage
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RoHS (Restriction of Hazardous Substances): Compliant per EU Directive
2002/95/EC.
Max Control Line Voltage
Max RF Input Power*
6
V
12
dBm
°C
Max Junction Temp (T )
+150
J
Max Storage Temp
+150
14.8
°C
Thermal Resistance (junction to
backside of module)
°C/W
ESD
Class 1C (1000V min)
MSL3
Moisture Sensitivity Level
*Load condition: Z =50
L
Specification
Parameter
Unit
Condition
Min.
Typ.
Max.
Frequency
2440
-40
2750
+85
31
MHz
°C
Temperature Range
25
28
Operating range
Gain
25
dB
Min attenuator setting
Operating power for ACPR rating
In high gain setting
Nominal Operating Output Power
12
dBm
dBm
dBm
dBc
Output IP3
P1dB
39
27
45
29.5
-64
High gain setting
ACPR
-58
Dual carrier WCDMA, 7.5dB CF at nominal
operating power; over full attenuation range
Gain Flatness
0.2
0.4
dB
dB
V
Over 50MHz BW
Gain Adjustment Range
Control Voltage Range
Noise Figure
19
0
3.3
6.5
5.0
50
dB
Min attenuator setting
Impedance
Input Return Loss
Output Return Loss
Supply Voltage
9
12
dB
dB
V
Over attenuation range
Over attenuation range
11
18
4.75
300
65
5.0
410
85
5.25
550
100
Supply Current
mA
mA
Max current is at -40°C
Supply Current (VPC=0V)
Output amplifier shutdown total current;
VPC=0V
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
2 of 9
DS111014
RVA3007L
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS111014
3 of 9
RVA3007L
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
4 of 9
DS111014
RVA3007L
Evaluation Board Schematic
Evaluation Board Bill of Materials (BOM)
Description
Reference
Designator
Manufacturer
Manufacturer’s P/N
EVALUATION BOARD
DDI
RFVAx007L410(A)
GRM155R61A105KE15D
RMC1/16SJPTH
CAP, 1F, 10%, 10V, X5R, 0402
RES, 00402
C7, C9- C10
MURATA ELECTRONICS
KAMAYA, INC
R1
J1-J2
P2
CONN, SMA, END LAUNCH, UNIV, HYB MNT, FLT
CONN, HDR, ST, PLRZD, 4-PIN, 0.100”
CONN, HDR, ST, PLRZD, 2-PIN, 0.100”
HEILIND ELECTRONICS
ITW PANCON
PER MAT-21-1038
MPSS100-4-C
P1
ITW PANCON
MPSS100-2-C
C1, C3-C4, C6, C11-C12,
R3-R5
DNP
RVA3007L MODULE
U1
RFMD
RVA3007L
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS111014
5 of 9
RVA3007L
Pin Table and Description
Pin
1
Function
RFIN
Description
RF input pin. Internal DC block.
Ground pin.
2
GND
Power up/down control for 2nd stage amplifier. Apply V to power on 2nd stage amplifier. Apply 0V to disable
3
VPC
CC
2nd stage amplifier. Do not exceed V +0.5V. Connect to V if not needed. Decoupling capacitor may be
CC
CC
desired on application board for control line noise.
No connection.
4
5
6
7
8
NC
VCC
GND
RFOUT
VCTRL
Power supply for the module. Recommending 1uF decoupling cap on the application board.
Ground pin.
RF output pin. Internal DC block.
Gain control voltage; 0V to 3.3V range. Maximum gain at 0V. Recommending 0.1uF decoupling on the applica-
tion board.
Center ground pads need to have a good thermal path on the application board. Use solder stencil pattern
shown in the document to define solder paste during assembly.
Center
Pad
GND
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
6 of 9
DS111014
RVA3007L
Application Schematic
(Without using final stage amplifier power down control)
VCNTRL
0.1 uF
8
Voltage
Variable
RF IN
1
7
RF OUT
Attenuator
2
3
4
5
6
VCC
1 uF
Application Schematic
(Using final stage amplifier power down control)
VCNTRL
0.1 uF
8
Voltage
Variable
RF IN
1
7
RF OUT
Attenuator
2
3
4
5
6
VCC
VPC
1 uF
0.1 uF
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS111014
7 of 9
RVA3007L
Package Drawing
Branding Diagram
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
8 of 9
DS111014
RVA3007L
Evaluation Board Assembly Drawing
PCB Design Requirements
Note: This solder stencil pattern is required to prevent solder voiding that may impact thermal dissipation.
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS111014
9 of 9
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明