RI-80SMD [RHOPOINT]
Dry Reed Switch; 干簧开关![RI-80SMD](http://pdffile.icpdf.com/pdf1/p00097/img/icpdf/RI-80SMD_519059_icpdf.jpg)
型号: | RI-80SMD |
厂家: | ![]() |
描述: | Dry Reed Switch |
文件: | 总2页 (文件大小:95K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
RI-80 SMD Series Dry Reed Switch
RI-80 SMD Series
Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass
envelope. Single-pole, single-throw (SPST) type, having normally
open contacts, and containing two magnetically actuated reeds.
The switch is of the double-ended type and may be actuated by an
electromagnet, a permanent magnet or a combination of both.
RI-80 SMD Series Features
ꢀ
ꢀ
ꢀ
ꢀ
Ideal for proximity sensors, telecom & medical applications
World’s smallest high quality reed switch
Contact layers: Gold, sputtered ruthenium
Superior glass-to-metal seal and blade alignment
Dimensions in inches (mm)
RI-80 SMD G2 Model
RI-80 SMD G1 Model
RI-80 SMD J-Lead Model
Loaded conditions (Resistive load: 5V; 100 mA;
operating frequency: 170 Hz)
General data for RI-80 SMD
AT-Customization
The RI-80 SMD can be supplied in operate ranges to
customer specification.
Life expectancy: min. 107 operations with a failure
rate of less than 10-8 with a confidence level of 90%.
End of life criteria:
Coils
Contact resistance > 1Ω after 4 ms
Release time > .7 ms (latching or contact sticking)
All characteristics are based on unmodified switches.
The switches are defined using the Philips Standard
Coil. For more information, see Reed Switch Technical
& Application Information Section of this catalog.
Switching different loads involves different life expect-
ancy and reliability data. Further information available
upon request.
Life expectancy and reliability
The life expectancy data given below are valid for a coil
energized at 1.25 times the published maximum operate
value for each type in the RI-80 series.
Mechanical Data
Contact arrangement is normally open; lead finish is
tinned; and can be mounted in any position.
No-load conditions (operating frequency: 100 Hz)
Life expectancy: min. 108 operations with a failure rate
of less than 2 x10-9 with a confidence level of 90%.
Shock
The switches are tested in accordance with “IEC
68-2-27”, test Ea (peak acceleration 150 G, half
sinewave; duration 11 ms). Such a shock will not cause
an open switch (no magnetic field present) to close nor
a switch kept closed by an 80 AT coil to open.
End of life criteria:
Contact resistance > 1Ω after 2 ms
Release time > 2ms (latching or contact sticking).
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920
6
(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216
88
RI-80 SMD Series Dry Reed Switch
Model Number
RI-80 SMD
Parameters
Test Conditions
Units
Operating Characteristics
Operate Range**
AT
AT
ms
ms
5-15**
2-13**
Release Range**
Operate Time - including bounce (typ.)
Bounce Time (typ.)
0.35 (20 AT)
0.1 (20 AT)
20 (20 AT)
21.300
(energization)
(energization)
(energization)
µ
s
Release Time (max)
Resonant Frequency (typ.)
Hz
Electrical Characteristics
Switched Power (max)
W
V
5
175*
Switched Voltage DC (max)
Switched Voltage AC, RMS value (max)
Switched Current DC (max)
V
140
mA
mA
A
350
Switched Current AC, RMS value (max)
Carry Current DC; AC, RMS value (max)
Breakdown Voltage (min)
250
0.5
V
230
Contact Resistance (initial max)
Contact Resistance (initial typ.)
Contact Capacitance (max)
m
m
Ω
Ω
(energization)
(energization)
without test coil
160 (20 AT)
140 (20 AT)
0.45
pF
106
M
Ω
RH
≤ 45%
Insulation Resistance (min)
* 200V for switches with AT-on value > 10AT.
** AT values of switches before SMD forming in PSC coil.
Soldering
Vibration
The switch can withstand soldering heat in accordance
with “IEC 68-2-20”, test Tb, method 1B: solder bath at
350 10°C for 3.5 0.5 s. Solderability is tested in
accordance with “IEC 68-2-20” test Ta, method 3:
solder globule temperature 235°C; ageing 1b: 4 hours
steam.
The switches are tested in accordance with “IEC
68-2-6”, test Fc (acceleration 10G; below cross-
over frequency 57 to 62 Hz; amplitude 0.75 mm;
frequency range 10 to 2000 Hz, duration 90
minutes.) Such a vibration will not cause an open
switch (no magnetic field present) to close, nor a switch
kept closed by an 80 AT coil to open.
Welding
The leads can be welded.
Mechanical Strength
The robustness of the terminations is tested in accor-
dance with “IEC 68-2-21”, test Ua1 (load 10N).
Operating and Storage Temperature
Operating ambient temperature; min: -55°C;
+
max: 125°C.
Storage temperature; min: -55°C; max: 125°C.
+
Note: Temperature excursions up to 150°C may be
permissible. For more information contact your nearest
Coto Technology sales office.
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com
6
E-mail: info@cotorelay.com
89
相关型号:
©2020 ICPDF网 联系我们和版权申明