R1154N039B-TR-F [RICOH]
Fixed Positive Standard Regulator, 3.9VCMOS, PDSO5, LEAD FREE, SC-74A, SOT-23, 5 PIN;
| 型号： | R1154N039B-TR-F |
| 厂家： | 
RICOH ELECTRONICS DEVICES DIVISION |
| 描述： | Fixed Positive Standard Regulator, 3.9VCMOS, PDSO5, LEAD FREE, SC-74A, SOT-23, 5 PIN 光电二极管 |
| 文件： | 总23页 (文件大小：404K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
R1154x SERIES
150mA Voltage Regulator (Wide Input Voltage Range)
NO.EA-100-061107
OUTLINE
The R1154x series are CMOS-based voltage regulator (VR) ICs. The R1154xxxxxx has features of high output
voltage accuracy and ultra-low supply current. A peak current limit circuit, a short current limit circuit, and a
thermal shutdown circuit are built in the R1154x series.
The regulator output voltage is fixed in the R1154xxxxB, while adjustable type is the R1154x001C.
Output voltage accuracy is ±2.0%.
Since the packages for these ICs are the SOT-89-5 and SOT-23-5, high density mounting of the ICs on boards
is possible.
FEATURES
• Supply Current............................................................. Typ. 5.0µA
• Standby Current........................................................... Typ. 0.1µA
• Output Voltage Accuracy.............................................. ±2.0%
• Wide Output Voltage Range ........................................ 2.5V to 12.0V(xxxB)
adjustable in the range of 2.5V to VIN or 24.0V (001C)
• Input Voltage ................................................................ Max. 24.0V
• Output Current ............................................................. Min. 140mA (VIN=VOUT+2.0V, 2.5V Output type)
Min. 150mA (VIN=VOUT+2.0V, 3.0V Output type)
• Package ....................................................................... SOT-89-5, SOT-23-5
• Built-in Peak Current Limit Circuit
• Short Current Limit Circuit
• Thermal Shutdown Circuit
APPLICATIONS
• Power source for home appliances such as refrigerators, rice cookers, Electronic water warmers, etc.
• Power source for car audio equipment, car navigation system, and ETC system.
• Power source for notebook PCs, digital TVs, cordless phones, and LAN system.
• Power source for copiers, printers, facsimiles, and scanners.
1
R1154x
BLOCK DIAGRAMS
R1154xxxxB
R1154xxxxC
Fixed Output Voltage
Adjustable Output Type
Thermal
Thermal
Protection
Protection
VIN
VOUT
VIN
VOUT
ADJ
-
-
+
+
Vref
Vref
Short
Peak Current
Short
Peak Current
Protection Protection
Protection Protection
GND
GND
CE
CE
SELECTION GUIDE
The output voltage can be selected at the user’s request.
The selection can be made with designating the part number as follows;
R1154xxxxx-xx-x
←Part Number
↑
↑
↑ ↑
↑
a
b
c d
e
Code
Contents
Designation of package type;
H: SOT-89-5
a
N: SOT-23-5
Designation of output voltage:
b
c
Adjustable: 001 (Reference voltage=2.5V)
Fixed: Stepwise Setting in the range from 2.5V to 12.0V
Designation of Output Type;
B: Fixed Output Type
C: Adjustable Output Type
Designation of Taping Type;T1, T2 (SOT-89-5), TR (SOT-23-5)
d
e
(Refer to Taping Specifications)
Designation of composition of plating:
−F: Lead free plating (SOT-23-5,SOT-89-5)
2
R1154x
PIN CONFIGURATION
SOT-89-5
SOT-23-5
5
4
5
4
3
(mark side)
1
2
3
1
2
PIN DESCRIPTION
• SOT-89-5
Pin No
Symbol
Description
1
2
3
VOUT
GND
CE
Voltage Regulator Output Pin
Ground Pin
Chip Enable Pin
B version: No Connection
4
5
NC/ADJ
C version: Reference Voltage of Adjustable Output Pin
VDD
Input Pin
• SOT-23-5
Pin No
Symbol
VOUT
Description
Voltage Regulator Output Pin
Ground Pin
1
2
3
GND
VDD
Input Pin
B version: No Connection
4
5
NC/ADJ
CE
C version: Reference Voltage of Adjustable Output Pin
Chip Enable Pin
3
R1154x
ABSOLUTE MAXIMUM RATINGS
Symbol
VIN
Item
Rating
26.0
Unit
V
Input Voltage
VCE
Input Voltage (CE Input Pin)
Output Voltage
-0.3 to VIN+0.3
-0.3 to VIN+0.3
-0.3 to VIN+0.3
250
V
VOUT
VADJ
IOUT
V
Output Voltage (ADJ Pin)
Output Current
V
mA
Power Dissipation (SOT-23-5) *Note1
Power Dissipation (SOT-89-5) *Note1
Operating Temperature
Storage Temperature
420
PD
mV
900
Topt
Tstg
-40 to +105
-55 to +125
°C
°C
*Note1) For Power Dissipation please refer to PACKAGE INFORMATION to be described.
ELECTRICAL CHARACTERISTICS
• R1154xxxxB
Topt=25°C
Symbol
VIN
Item
Input Voltage
Conditions
Min.
Typ.
Max.
24
Unit
V
V
VOUT
IOUT
Output Voltage
Output Current
VIN=VOUT+2.0V
×0.98
×1.02
Refer to the Output Current Table
VIN−VOUT=2.0V
VIN=VCE
ISS
Supply Current
5
10
µA
µA
VIN-VOUT=2.0V
Istandby Standby Current
0.1
1.0
VIN=24V, VCE=0V
∆VOUT/
1VmIN−AVOUITO=U2T.0V40mA
Refer to the Load Regulation Table
Load regulation
∆IOUT
=
=
∆VOUT/
IOUT=20mA
Line regulation
0.05
0.20
%/V
VOUT+1V
VIN
24V
∆VIN
=
=
Refer to the Dropout Voltage Table
VDIF
Dropout Voltage
IOUT=20mA
∆VOUT/
Output Voltage
VIN−VOUT=2.0V IOUT=20mA
−40°C Topt 105°C
±100
ppm/°C
Temperature Coefficient
∆Topt
=
=
Ilim
Short Current Limit
CE “H” Input Voltage
CE “L” Input Voltage
45
mA
V
VOUT=0V
VCEH
VCEL
2.1
0.0
VIN
0.3
V
Thermal Shutdown
TSD
TSR
Junction Temperature
Junction Temperature
150
125
°C
°C
Temperature
Thermal Shutdown
Released Temperature
4
R1154x
• R1154xxxxC
Topt=25°C
Symbol
Item
Input Voltage
Conditions
Min.
Typ.
Max.
24
Unit
V
VIN
VIN=VOUT+2.0V,VOUT=VADJ
IOUT=20mA
VIN=VOUT+2.0V,VOUT=VADJ
VOUT
IOUT
ISS
Output Voltage
Output Current
Supply Current
2.45
140
2.50
2.55
V
mA
µA
VIN=VOUT+2.0V,VOUT=VADJ
5
10
1.0
50
VCE=VIN
VIN=24V, VOUT=VADJ
VCE=0V
Istandby
Standby Current
Load regulation
0.1
20
µA
1VmIN=AVOUITO+U2T.0V,VOUT=VADJ
40mA
mV
∆VOUT/∆IOUT
=
=
VOUT+1V
VIN
24V
=
=
Line regulation
0.05
0.20
0.20
0.40
%/V
V
∆VOUT/∆VIN
VOUT=VADJ,IOUT=20mA
VOUT=VADJ,IOUT=20mA
VDIF
Dropout Voltage
VIN=VOUT+2.0V,VOUT=VADJ
IOUT=20mA
∆VOUT/
Output Voltage
±100
ppm/°C
Temperature Coefficient
∆Topt
-40°C Topt 105°C
=
=
Ilim
Short Current Limit
CE “H” Input Voltage
CE “L” Input Voltage
45
mA
V
VOUT=VADJ=0V
VCEH
VCEL
2.1
0.0
VIN
0.3
V
Thermal Shutdown
TSD
TSR
Junction Temperature
Junction Temperature
150
125
°C
°C
Temperature
Thermal Shutdown
Released Temperature
5
R1154x
• Output Current (Topt=25°C)
Output Current
(mA)
Output Voltage
VOUT (V)
Min.
140
150
<
2.5
3.0
VOUT
VOUT
2.9
=
=
<
12.0
=
=
• Load Regulation (Topt=25°C)
Load Regulation (mV)
Output Voltage
VOUT (V)
Typ.
Max.
50
<
=
<
=
2.5
3.1
5.1
VOUT
VOUT
VOUT
3.0
5.0
20
30
40
<
=
<
=
75
<
<
12.0
115
=
=
• Dropout Voltage (Topt=25°C)
Dropout Voltage (V)
Output Voltage
VOUT (V)
Typ.
0.20
0.25
0.30
Max.
0.40
0.50
0.55
<
<
2.5
7.1
VOUT
VOUT
VOUT
7.0
=
=
<
<
10.0
=
=
<
<
10.1
12.0
=
=
TYPICAL APPLICATIONS
IN
IN
OUT
VIN
V
IN
VOUT
OUT
CE
VOUT
CE
CIN
CIN
COUT
ADJ
GND
GND
COUT
Fixed Output Voltage Type
Adjustable Type
6
R1154x
TEST CIRCUITS
I
SS
IN
IN
V
DD
VDD
I
OUT
R1154xxxxB
SERIES
OUT
OUT
C
IN
CIN
CE
V
OUT
COUT
COUT
GND
GND
R1154xxxxB Standard Test Circuit
R1154xxxxB Supply Current Test Circuit
IN
IN
V
DD
VDD
I
OUT
R1154xxxxB
SERIES
OUT
OUT
P.G.
C
IN
CE
V
OUT
C
OUT
COUT
GND
GND
I1
I2
R1154xxxxB Input Transient Response Test Circuit
R1154xxxxB Load Regulation Test Circuit
I
SS
IN
IN
V
DD
VDD
I
OUT
OUT
OUT
V
OUT
VOUT
R1154x001C
SERIES
R1154x001C
SERIES
CIN
CIN
R1
R2
R1
R2
CE
CE
ADJ
GND
C
OUT
ADJ
GND
COUT
R1154x001C Standard Test Circuit
R1154x001C Supply Current Test Circuit
IN
IN
V
DD
VDD
I
OUT
OUT
OUT
I2
V
OUT
VOUT
R1154x001C
SERIES
R1154x001C
SERIES
P.G.
C
IN
R1
R2
R1
R2
CE
CE
ADJ
GND
C
OUT
ADJ
GND
C
OUT
I1
R1154x001C Input Transient Response Test Circuit R1154x001C Load Transient Response Test Circuit
7
R1154x
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current
R1154x025B
R1154x025B
Topt=25˚C
V
IN=4.5V
-40˚C
3
3
2.5
2
2.5
5.5V
4.5V
4.0V
2
1.5
1
V
IN=3.5V
1.5
1
105˚C
25˚C
0.5
0
0.5
0
0
0
0
100
200
300
0
0
0
100
200
300
Output Current IOUT(mA)
Output Current IOUT(mA)
R1154x030B
R1154x030B
Topt=25˚C
6.0V
V
IN=5.0V
3.5
3
3.5
3
-40˚C
5.0V
4.5V
V
IN=4.0V
25˚C
2.5
2
2.5
2
105˚C
1.5
1
1.5
1
0.5
0
0.5
0
100
200
300
100
200
300
Output Current IOUT(mA)
Output Current IOUT(mA)
R1154x050B
R1154x050B
Topt=25˚C
6.5V
7.0V
V
IN=7.0V
6
5
4
3
2
1
0
6
5
4
3
2
1
0
V
IN=6.0V
25˚C
8.0V
-40˚C
105˚C
100
200
300
100
200
300
Output Current IOUT(mA)
Output Current IOUT(mA)
8
R1154x
R1154x090B
R1154x090B
Topt=25˚C
VIN=11.0V
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
12V
11V
25˚C
10.5V
V
IN=10.0V
105˚C
-40˚C
0
100
200
300
0
50
100 150 200 250 300
Output Current IOUT(mA)
Output Current IOUT(mA)
2) Input Voltage vs. Output Voltage (Topt=25°C)
R1154x025B
R1154x030B
3.5
4
3.5
3
3
I
OUT=1mA
I
OUT=1mA
2.5
2
I
OUT=20mA
2.5
2
I
OUT=20mA
OUT=40mA
I
OUT=40mA
I
1.5
0
5
10
15
20
25
0
5
10
15
20
25
Input Voltage VIN(V)
Input Voltage VIN(V)
R1154x050B
R1154x090B
6
5.5
5
10
9.5
9
I
OUT=20mA
I
OUT=20mA
I
OUT=1mA
I
OUT=1mA
4.5
4
8.5
8
I
OUT=40mA
I
OUT=40mA
0
5
10
15
20
25
0
5
10
15
20
25
Input Voltage VIN(V)
Input Voltage VIN(V)
9
R1154x
3) Dropout Voltage vs. Output Current
R1154x025B
R1154x030B
2.5
2.5
2
2
Topt=105˚C
Topt=105˚C
1.5
1.5
1
25˚C
25˚C
1
-40˚C
-40˚C
0.5
0.5
0
0
0
20 40 60 80 100 120 140 160
Output Current IOUT(mA)
0
20 40 60 80 100 120 140 160
Output Current IOUT(mA)
R1154x050B
R1154x090B
2.5
2
2.5
2
1.5
1
1.5
1
Topt=105˚C
25˚C
Topt=105˚C
25˚C
-40˚C
0.5
0
0.5
0
-40˚C
0
20 40 60 80 100 120 140 160
Output Current IOUT(mA)
0
20 40 60 80 100 120 140 160
Output Current IOUT(mA)
4) Output Voltage vs. Temperature
R1154x025B
R1154x030B
V
IN=4.5V, IOUT=20mA
VIN=5.0V, IOUT=20mA
2.60
2.55
2.50
2.45
2.40
3.10
3.05
3.00
2.95
2.90
-50
0
50
100
-50
0
50
100
Temperature Topt(˚C)
Temperature Topt(˚C)
10
R1154x
R1154x050B
R1154x090B
V
IN=7.0V, IOUT=20mA
VIN=11.0V, IOUT=20mA
5.2
5.1
5.0
4.9
4.8
9.4
9.2
9.0
8.8
8.6
-50
0
50
100
-50
0
50
100
Temperature Topt(˚C)
Temperature Topt(˚C)
5) Supply Current vs. Input Voltage (Topt=25°C)
R1154x025B
R1154x030B
12
12
10
8
10
8
6
6
4
4
2
2
0
0
0
5
10
15
20
25
0
5
10
15
20
25
Input Voltage VIN(V)
Input Voltage VIN(V)
R1154x050B
R1154x090B
12
10
8
12
10
8
6
6
4
4
2
2
0
0
0
5
10
15
20
25
0
5
10
15
20
25
Input Voltage VIN(V)
Input Voltage VIN(V)
11
R1154x
6) Supply Current vs. Temperature
R1154x025B
R1154x030B
V
IN=4.5V
V
IN=5.0V
12
10
8
12
10
8
6
6
4
4
2
2
0
-50
0
-50
0
50
100
0
50
100
Temperature Topt(˚C)
Temperature Topt(˚C)
R1154x050B
R1154x090B
V
IN=7.0V
V
IN=11.0V
12
12
10
8
10
8
6
6
4
4
2
2
0
-50
0
-50
0
50
100
0
50
100
Temperature Topt(˚C)
Temperature Topt(˚C)
7) Input Transient Response (IOUT=20mA, COUT=0.1µF, Topt=25°C)
R1154x025B
10
15
10
5
8
Input Voltage
6
4
0
Output Voltage
2
0
-5
-10
-2
0
2
4
6
8
10
12
14
Time T(ms)
12
R1154x
R1154x030B
10
8
15
10
5
Input Voltage
6
4
0
Output Voltage
2
-5
-10
0
-2
-2
-2
0
2
4
6
8
10
12
14
Time T(ms)
R1154x050B
20
18
16
14
12
10
8
15
10
5
Input Voltage
0
Output Voltage
6
4
-5
-10
2
0
-1
0
1
2
3
4
5
6
Time T(ms)
R1154x090B
24
22
20
18
16
14
12
10
8
20
15
10
5
Input Voltage
Output Voltage
0
6
4
-5
-1
0
1
2
3
4
5
6
Time T(ms)
13
R1154x
8) Load Transient Response (COUT=0.1µF, Topt=25°C)
R1154x025B
V
V
V
IN=4.5V
7
30
20
10
0
20mA
6
5
Output Current
1mA
4
Output Voltage
3
2
1
-10
-20
-30
-0.5
0
0
0
0.5
1
1.5
2
2
2
2.5
2.5
2.5
3
Time T(ms)
R1154x030B
IN=5.0V
8
7
6
5
4
3
2
30
20
10
0
20mA
Output Current
1mA
-10
-20
-30
Output Voltage
-0.5
0.5
1
1.5
3
Time T(ms)
R1154x050B
IN=7.0V
9
8
7
6
5
4
3
30
20
10
0
20mA
Output Current
1mA
-10
-20
-30
Output Voltage
-0.5
0.5
1
1.5
3
Time T(ms)
14
R1154x
R1154x090B
V
IN=11.0V
13
12
11
10
9
30
20
10
0
20mA
Output Current
1mA
-10
-20
-30
Output Voltage
8
7
-0.5
0
0.5
1
1.5
2
2.5
3
Time T(ms)
9) Thermal Shutdown Characteristics
R1154x050B
V
IN=10V, IOUT=1mA
8
7
6
5
4
3
2
1
0
0
20
40
60
80 100 120 140 160 180
Junction Temperature Tjct(°C)
15
R1154x
TECHNICAL NOTES
Phase Compensation
Phase Compensation of the R1154x Series has been made internally for stable operation even though the
load current would vary. Therefore, without the capacitors, CIN and COUT, the output voltage is regulated, however,
for more stable operation, use capacitors as CIN and COUT. Especially, if the input line is long and impedance is
high, CIN is necessary, moreover, if you use COUT, transient response will be improved. Recommended value is in
the range from 0.1µF to 2.2µF. Wiring should be made as short as possible.
Connect the capacitor, CIN between VDD pin and GND pin and COUT between VOUT and GND as close as
possible.
VDD
VDD
I
OUT
V
OUT
R1154xxxxB
SERIES
I
OUT
R1
R2
V
IN
CIN
V
IN
CIN
CE
V
OUT
C
OUT
C
OUT
GND
R1154xxxxB Typical Application
Thermal Shutdown
R1154xxxxC Typical Application
Thermal shutdown function is included in the R1154x Series, if the junction temperature is equal or more than
+150°C(Typ.), the operation of regulator would stop. After that, when the junction temperature is equal or less
than +125°C(Typ.), the operation of regulator would restart. Unless the cause of rising temperature would
remove, the regulator repeats on and off, and output waveform would be like consecutive pulses.
Chip Enable Circuit
Do not make voltage level of chip enable pin keep floating level, or in between VIH and VIL. Unless otherwise,
Output voltage would be unstable or indefinite, or unexpected current would flow internally.
* Technical Notes on Output Voltage Setting of C type
Figure 1. Adjustable Regulator (C type)
VOUT
R1
R2
I1
I2
ADJ
IIC
VOUT
RIC
2.5V
GND
16
R1154x
The Output Voltage of Regulator in R1154xxxxC may be adjustable for any output voltage between its
2.5V reference and its VDD setting level. An external pair of resistors is required, as shown in Figure 1.
The complete equation for the output voltage is described step by step as follows;
I1=IIC+I2..................................................................................................................................... (1)
I2=2.5/R2 .................................................................................................................................. (2)
Thus,
I1=IIC+2.5/R2............................................................................................................................. (3)
VOUT=2.5+R1×I1 ........................................................................................................................ (4)
Therefore,
Put Equation (3) into Equation (4),then
VOUT=2.5+R1(IIC+2.5/R2)
=2.5(1+R1/R2)+R1×IIC ....................................................................................................... (5)
In 2nd term, or R1×IIC will produce an error in VOUT.
In Equation (5),
IIC=2.5/RIC .................................................................................................................................. (6)
R1×IIC=R1×2.5/RIC
=2.5×R1/RIC.................................................................................................................... (7)
For better accuracy, choosing R1 (<<RIC) reduces this error.
Adjustable Resister Dependence of Output Voltage (Topt=25°C)
R2=10kΩ
R2=100kΩ
24.0
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
24.0
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
6.0
4.0
4.0
2.0
2.0
0.0
0.0
0
20
40
60
80
100
0
200
400
600
800
1000
R1Resistance (kΩ)
R1 Resistance (kΩ)
17
PE-SOT-23-5-071228
PACKAGE INFORMATION
• SOT-23-5 (SC-74A)
Unit: mm
PACKAGE DIMENSIONS
2.9±0.2
+0.2
−0.1
1.1
1.9±0.2
(0.95)
(0.95)
0.8±0.1
5
4
0 to 0.1
1
2
3
+0.1
−0.05
0.15
0.4±0.1
TAPING SPECIFICATION
4.0–0.1
+0.1
0
φ1.5
2.0–0.05
0.3–0.1
3.3
4.0–0.1
2.0Max.
1.1±0.1
TR
User Direction of Feed
TAPING REEL DIMENSIONS REUSE REEL (EIAJ-RRM-08Bc)
(1reel=3000pcs)
11.4±1.0
9.0±0.3
2±0.5
21±0.8
PE-SOT-23-5-071228
PACKAGE INFORMATION
POWER DISSIPATION (SOT-23-5)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)
Measurement Conditions
Standard Land Pattern
Environment
Board Material
Board Dimensions
Copper Ratio
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
40mm × 40mm × 1.6mm
Top side : Approx. 50% , Back side : Approx. 50%
φ0.5mm × 44pcs
Through-hole
Measurement Result
(Topt=25°C, Tjmax=125°C)
Free Air
Standard Land Pattern
420mW
Power Dissipation
250mW
Thermal Resistance
θja=(125−25°C)/0.42W=238°C/W
400°C/W
600
40
500
400
300
200
100
0
On Board
420
250
Free Air
0
25
50
75 85 100
125
150
Ambient Temperature (°C)
Power Dissipation
Measurement Board Pattern
IC Mount Area Unit : mm
RECOMMENDED LAND PATTERN
0.7 MAX.
1.0
2.4
0.95
1.9
0.95
(Unit: mm)
PE-SOT-89-5-071210
PACKAGE INFORMATION
• SOT-89-5
Unit: mm
PACKAGE DIMENSIONS
4.5 0.1
1.5 0.1
1.6 0.2
0.42 0.1
0.4 0.1
4
5
5
4
∅1.0
0.1 S
1
2
3
1
0.4 0.1
S
3
2
Bottom View
0.47
0.1
0.42 0.1
0.42 0.1
1.5 0.1
1.5 0.1
TAPING SPECIFICATION (T1: Standard Type)
4.0 0.1
+0.1
0
∅1.5
0.3 0.1
2.0 0.05
5.0
8.0 0.1
2.5Max.
∅1.6 0.1
T1
User Direction of Feed
TAPING REEL DIMENSIONS REUSE REEL (EIAJ-RRM-12Bc)
(1reel=1000pcs)
15.4 1.0
13 0.3
2
0.5
21 0.8
PE-SOT-89-5-071210
PACKAGE INFORMATION
POWER DISSIPATION (SOT-89-5)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.
This specification is based on the measurement at the condition below:
Measurement Conditions
High Wattage Land Pattern
Standard Land Pattern
Environment
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
Mounting on Board (Wind velocity=0m/s)
Glass cloth epoxy plastic (Double sided)
Board Material
Board
Dimensions
30mm × 30mm × 1.6mm
50mm × 50mm × 1.6mm
Top side : Approx. 20% ,
Back side : Approx. 100%
Top side : Approx. 10% ,
Back side : Approx. 100%
Copper Ratio
Through-hole
-
φ0.85mm × 10pcs
Measurement Result
(Topt=25°C,Tjmax=125°C)
High Wattage Land Pattern
1300mW
Standard Land Pattern
Free Air
Power Dissipation
900mW
500mW
Thermal Resistance
77°C/W
111°C/W
200°C/W
1500
30
15
1400
1300
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
On Board
(High Wattage Land Pattern)
7.5
50
On Board
(Standard Land Pattern)
Free Air
0
25
50
75 85 100 125 150
Standard
High Wattage
Ambient Temperature (°C)
Power Dissipation
Measurement Board Pattern
IC Mount Area (Unit : mm)
RECOMMENDED LAND PATTERN (SOT-89-5)
1.0
0.7 Max.
0.7 Max.
45°
2.0
1.5
1.5
(Unit : mm)
ME-R1154N-0409
MARK INFORMATION
R1154N SERIES MARK SPECIFICATION
• SOT-23-5 (SC-74A)
1
4
2
5
3
,
,
,
: Product Code (refer to Part Number vs. Product Code)
: Lot Number
1
2
3
4
5
• Part Number vs. Product Code
Product Code
Product Code
Product Code
Product Code
Part Number
Part Number
Part Number
Part Number
1
2
3
1
2
3
1
2
3
1
2
3
R1154N001C
R1154N025B
R1154N026B
R1154N027B
R1154N028B
R1154N029B
R1154N030B
R1154N031B
R1154N032B
R1154N033B
R1154N034B
R1154N035B
R1154N036B
R1154N037B
R1154N038B
R1154N039B
R1154N040B
R1154N041B
R1154N042B
R1154N043B
R1154N044B
R1154N045B
R1154N046B
R1154N047B
R1154N048B
R1154N049B
R1154N050B
R1154N051B
R1154N052B
R1154N053B
R1154N054B
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R1154N055B
R1154N056B
R1154N057B
R1154N058B
R1154N059B
R1154N060B
R1154N061B
R1154N062B
R1154N063B
R1154N064B
R1154N065B
R1154N066B
R1154N067B
R1154N068B
R1154N069B
R1154N070B
R1154N071B
R1154N072B
R1154N073B
R1154N074B
R1154N075B
R1154N076B
R1154N077B
R1154N078B
R1154N079B
R1154N080B
R1154N081B
R1154N082B
R1154N083B
R1154N084B
R1154N085B
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
R1154N086B
R1154N087B
R1154N088B
R1154N089B
R1154N090B
R1154N091B
R1154N092B
R1154N093B
R1154N094B
R1154N095B
R1154N096B
R1154N097B
R1154N098B
R1154N099B
R1154N100B
R1154N101B
R1154N102B
R1154N103B
R1154N104B
R1154N105B
R1154N106B
R1154N107B
R1154N108B
R1154N109B
R1154N110B
R1154N111B
R1154N112B
R1154N113B
R1154N114B
R1154N115B
R1154N116B
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
8
8
8
8
9
9
9
9
9
9
9
9
9
9
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
R1154N117B
R1154N118B
R1154N119B
R1154N120B
J
J
J
J
1
1
1
2
7
8
9
0
ME-R1154H-0310
MARK INFORMATION
R1154H SERIES MARK SPECIFICATION
• SOT-89-5
1
: G (fixed)
(refer to Part Number vs. Product Code)
1
2
3
2
5
3
6
4
,
,
,
: Product Code
: Lot Number
4
6
5
• Part Number vs. Product Code
Product Code
Product Code
Product Code
Product Code
Part Number
Part Number
Part Number
Part Number
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
R1154H025B
R1154H026B
R1154H027B
R1154H028B
R1154H029B
R1154H030B
R1154H031B
R1154H032B
R1154H033B
R1154H034B
R1154H035B
R1154H036B
R1154H037B
R1154H038B
R1154H039B
R1154H040B
R1154H041B
R1154H042B
R1154H043B
R1154H044B
R1154H045B
R1154H046B
R1154H047B
R1154H048B
R1154H049B
R1154H050B
R1154H051B
R1154H052B
R1154H053B
R1154H054B
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R1154H055B
R1154H056B
R1154H057B
R1154H058B
R1154H059B
R1154H060B
R1154H061B
R1154H062B
R1154H063B
R1154H064B
R1154H065B
R1154H066B
R1154H067B
R1154H068B
R1154H069B
R1154H070B
R1154H071B
R1154H072B
R1154H073B
R1154H074B
R1154H075B
R1154H076B
R1154H077B
R1154H078B
R1154H079B
R1154H080B
R1154H081B
R1154H082B
R1154H083B
R1154H084B
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R1154H085B
R1154H086B
R1154H087B
R1154H088B
R1154H089B
R1154H090B
R1154H091B
R1154H092B
R1154H093B
R1154H094B
R1154H095B
R1154H096B
R1154H097B
R1154H098B
R1154H099B
R1154H100B
R1154H101B
R1154H102B
R1154H103B
R1154H104B
R1154H105B
R1154H106B
R1154H107B
R1154H108B
R1154H109B
R1154H110B
R1154H111B
R1154H112B
R1154H113B
R1154H114B
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R1154H115B
R1154H116B
R1154H117B
R1154H118B
R1154H119B
R1154H120B
G
G
G
G
G
G
1
1
1
1
1
1
1
1
1
1
1
2
5
6
7
8
9
0
R1154H001C
G
0
0
1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明