首页 |元器件品牌

R3111X55XX [RICOH]

LOW VOLTAGE DETECTOR; 低电压检测
R3111X55XX
型号： R3111X55XX
厂家： RICOH ELECTRONICS DEVICES DIVISION    RICOH ELECTRONICS DEVICES DIVISION
描述：

LOW VOLTAGE DETECTOR
低电压检测
文件： 总44页 (文件大小：1489K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
R3111x SERIES  
LOW VOLTAGE DETECTOR  
OUTLINE  
NO.EA-056-070829  
The R3111x series are CMOS-based voltage detector ICs with high detector threshold accuracy and ultra-low  
supply current, which can be operated at an extremely low voltage and is used for system reset as an example.  
Each of these ICs consists of a voltage reference unit, a comparator, resistors for detector threshold setting,  
an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy internally and does  
not require any adjustment.  
Three output types, Nch open drain “L” type, Nch open drain “H” type and CMOS type are available.  
The R3111x Series are operable at a lower voltage than that for the Rx5VL series, and can be driven by a  
single battery.  
Six types of packages, TO-92, SOT-89, SOT-23-3, SOT-23-5, SC-82AB, and SON1612-6 are available.  
FEATURES  
• Supply Current......................................................................Typ. 0.8µA (VDD=1.5V)  
• Range of Operating Voltage..................................................0.7V to 10.0V (Topt=25°C)  
• Detector Threshold................................................................0.9V to 6.0V  
• Accuracy Detector Threshold................................................±2.0%  
• Temperature-Drift Coefficient of Detector Threshold ............Typ. ±100ppm/°C  
• Output Types.........................................................................Nch Open Drain “L”, Nch Open Drain “H”, and  
CMOS  
• Packages ..............................................................................TO-92, SOT-89, SOT-23-3, SOT-23-5,  
SC-82AB, SON1612-6  
APPLICATIONS  
• CPU and Logic Circuit Reset  
• Battery Checker  
• Window Comparator  
• Wave Shaping Circuit  
• Battery Back-up Circuit  
• Power Failure Detector  
1
R3111x  
BLOCK DIAGRAMS  
R3111xxxxA  
R3111xxxxB  
DD  
V
DD  
V
OUT  
GND  
OUT  
GND  
Vref  
Vref  
R3111xxxxC  
DD  
V
OUT  
GND  
Vref  
2
R3111x  
SELECTION GUIDE  
The package type, the detector threshold, the output type and the taping type for the ICs can be selected at  
the users’ request. The selection can be made with designating the part number as shown below;  
R3111xxxxx-xx-x ← Part Number  
↑ ↑ ↑ ↑  
a b c d  
↑
e
↑
f
Code  
Contents  
Designation of Package Type;  
D: SON1612-6  
E: TO-92  
H: SOT-89  
a
N: SOT-23-5, SOT-23-3  
Q: SC-82AB  
Setting Detector Threshold (−VDET);  
b
c
Stepwise setting with a step of 0.1V in the range of 0.9V to 6.0V is possible.  
Designation of Package Type  
1: except SOT-23-3  
2: SOT-23-3  
Designation of Output Type;  
A: Nch Open Drain (Output “L” at VDD=−VDET)  
B: Nch Open Drain (Output “H” at VDD=−VDET)  
C: CMOS (Output “L” at VDD=−VDET)  
d
Designation of Packing or Taping Type ;  
Ex.TO-92: TZ, SOT-89: T1, SOT-23-3, SOT-23-5, SC-82AB, SON1612-6: TR  
prescribed as standard directions.  
(Refer to Taping Specifications.) Antistatic bag for TO-92: C  
e
f
Designation of Composition of pin plating  
-F: Lead free plating (TO-92, SOT-89, SOT-23-3, SOT-23-5, SC-82AB, SON1612-6)  
3
R3111x  
PIN CONFIGURATIONS  
ꢀTO-92  
ꢀSOT-89  
ꢀSOT-23-3  
ꢀSOT-23-5  
ꢀSC-82AB  
ꢀSON1612-6  
6
5
4
3
5
4
4
3
(mark side)  
(mark side)  
(mark side)  
(mark side)  
(mark side)  
(mark side)  
3
1
2
1
2
3
1
2
1
2
3
2
1
3
1
2
PIN DESCRIPTIONS  
ꢀTO-92  
ꢀSOT-89  
ꢀSOT-23-3  
Pin No.  
Symbol  
VDD  
Pin No.  
Symbol  
OUT  
Pin No.  
Symbol  
OUT  
1
2
3
1
2
3
1
2
3
GND  
OUT  
VDD  
GND  
VDD  
GND  
ꢀSOT-23-5  
ꢀSC-82AB  
ꢀSON1612-6  
Pin No.  
Symbol  
OUT  
VDD  
Pin No.  
Symbol  
OUT  
VDD  
Pin No.  
Symbol  
OUT  
VDD  
1
2
3
4
5
1
2
3
4
1
2
3
4
5
6
GND  
NC  
NC  
GND  
NC  
GND  
NC  
VDD  
NC  
4
R3111x  
ABSOLUTE MAXIMUM RATINGS  
Symbol  
Item  
Rating  
Unit  
V
VDD  
Supply Voltage  
12  
VOUT1  
VOUT2  
IOUT  
Output Voltage (CMOS)  
V
VSS−0.3 to VDD+0.3  
Output Voltage (Nch)  
V
VSS−0.3 to 12  
70  
Output Current  
mA  
Power Dissipation (TO-92)*  
Power Dissipation (SOT-89)*  
Power Dissipation (SOT-23-3)*  
Power Dissipation (SOT-23-5)*  
Power Dissipation (SC-82AB)*  
Power Dissipation (SON1612-6)*  
Operating Temperature Range  
Storage Temperature Range  
Lead temperature (Soldering)  
300  
900  
420  
PD  
mW  
420  
380  
500  
Topt  
Tstg  
−40 to 85  
−55 to 125  
°C  
°C  
Tsolder  
260°C, 10s  
* ) For Power Dissipation, please refer to PACKAGE INFORMATION to be described.  
5
R3111x  
ELECTRICAL CHARACTERISTICS  
• R3111x09xA/C  
Topt=25°C  
Symbol  
−VDET  
VHYS  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
0.882 0.900 0.918  
0.027 0.045 0.063  
Detector Threshold Hysteresis  
V
VDD=0.80V  
VDD=2.90V  
0.8  
0.9  
2.4  
2.7  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V,VDD=0.70V  
VDS=0.50V,VDD=0.85V  
0.01  
0.05  
0.05  
0.50  
mA  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
Pch  
mA  
µs  
1.0  
2.0  
VDS=−2.1V,VDD=4.5V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
• R3111x18xA/C  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
1.764 1.800 1.836  
0.054 0.090 0.126  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=1.70V  
VDD=3.80V  
0.8  
1.0  
2.4  
3.0  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V, VDD=0.70V  
VDS=0.50V, VDD=1.50V  
0.01  
1.00  
0.05  
2.00  
mA  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
Pch  
mA  
µs  
1.0  
2.0  
VDS=−2.1V,VDD=4.5V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
∗Note1:Minimum operating voltage means the value of input voltage when output voltage maintains 0.1V or less. (In  
the case of Nch Open Drain Output type, the output pin is pulled up with a resistance of 470k to 5.0V.)  
Ω
∗Note2:In the case of CMOS Output type: The time interval between the rising edge of VDD input pulse from 0.7V  
to (+VDET)+2.0V and output voltage level becoming to ((+VDET)+2.0V)/2.  
In the case of Nch Open Drain Output type: The output pin is pulled up with a resistance of 470kΩ to  
5.0V, the time interval between the rising edge of VDD input pulse from 0.7V to (+VDET)+2.0V and output  
voltage level becoming to 2.5V.  
6
R3111x  
• R3111x27xA/C  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
2.646 2.700 2.754  
0.081 0.135 0.189  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=2.60V  
VDD=4.70V  
0.9  
1.1  
2.7  
3.3  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V,VDD=0.70V  
VDS=0.50V,VDD=1.50V  
0.01  
1.00  
0.05  
2.00  
mA  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
Pch  
mA  
µs  
1.0  
2.0  
VDS=−2.1V,VDD=4.5V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
• R3111x36xA/C  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
3.528 3.600 3.672  
0.108 0.180 0.252  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD= 3.47V  
VDD= 5.60V  
1.0  
1.2  
3.0  
3.6  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V,VDD=0.70V  
VDS=0.50V,VDD=1.50V  
0.01  
1.00  
0.05  
2.00  
mA  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
Pch  
mA  
µs  
1.0  
2.0  
VDS=−2.1V,VDD=4.5V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
∗Note1:Minimum operating voltage means the value of input voltage when output voltage maintains 0.1V or less. (In  
the case of Nch Open Drain Output type, the output pin is pulled up with a resistance of 470k to 5.0V.)  
Ω
∗Note2:In the case of CMOS Output type: The time interval between the rising edge of VDD input pulse from 0.7V  
to (+VDET)+2.0V and output voltage level becoming to ((+VDET)+2.0V)/2.  
In the case of Nch Open Drain Output type: The output pin is pulled up with a resistance of 470kΩ to  
5.0V, the time interval between the rising edge of VDD input pulse from 0.7V to (+VDET)+2.0V and output  
voltage level becoming to 2.5V.  
7
R3111x  
• R3111x45xA/C  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
4.410 4.500 4.590  
0.135 0.225 0.315  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=4.34V  
VDD=6.50V  
1.1  
1.3  
3.3  
3.9  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V, VDD=0.70V  
VDS=0.50V, VDD=1.50V  
0.01  
1.00  
0.05  
2.00  
mA  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
Pch  
mA  
µs  
1.5  
3.0  
VDS=−2.1V,VDD=8.0V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
• R3111x54xA/C  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
5.292 5.400 5.508  
0.162 0.270 0.378  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=5.20V  
VDD=7.40V  
1.2  
1.4  
3.6  
4.2  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.05V, VDD=0.70V  
VDS=0.50V, VDD=1.50V  
0.01  
1.00  
0.05  
2.00  
mA  
Output Current  
(Driver Output Pin)  
IOUT  
tPLH  
Pch  
mA  
µs  
1.5  
3.0  
VDS=−2.1V, VDD=8.0V  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
∗Note1:Minimum operating voltage means the value of input voltage when output voltage maintains 0.1V or less. (In  
the case of Nch Open Drain Output type, the output pin is pulled up with a resistance of 470k to 5.0V.)  
Ω
∗Note2:In the case of CMOS Output type: The time interval between the rising edge of VDD input pulse from 0.7V  
to (+VDET)+2.0V and output voltage level becoming to ((+VDET)+2.0V)/2.  
In the case of Nch Open Drain Output type: The output pin is pulled up with a resistance of 470kΩ to  
5.0V, the time interval between the rising edge of VDD input pulse from 0.7V to (+VDET)+2.0V and output  
voltage level becoming to 2.5V.  
8
R3111x  
• R3111Q231B  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
2.254 2.300 2.346  
0.069 0.115 0.161  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=2.2V  
VDD=4.3V  
0.9  
1.1  
2.7  
3.3  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.50V,VDD=3.0V  
IOUT  
tPLH  
Output Current (Driver Output Pin)  
2.5  
mA  
µs  
Note2  
Output Delay Time∗  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
• R3111Q441B  
Topt=25°C  
Symbol  
Item  
Conditions  
Min.  
Typ.  
Max.  
Unit  
V
Detector Threshold  
4.312 4.400 4.488  
0.132 0.220 0.308  
−VDET  
VHYS  
Detector Threshold Hysteresis  
V
VDD=4.24V  
VDD=6.4V  
1.1  
1.3  
3.3  
3.9  
ISS  
Supply Current  
µA  
VDDH  
Maximum Operating Voltage  
10  
V
0.55  
0.65  
0.70  
0.80  
Topt=25°C  
Note1  
Minimum Operating Voltage∗  
VDDL  
V
−40°C Topt 85°C  
=
=
Nch  
VDS=0.50V, VDD=5.5V  
Output Current  
(Driver Output Pin)  
Output Delay Time∗  
IOUT  
tPLH  
2.5  
mA  
µs  
Note2  
100  
∆−VDET/  
∆Topt  
Detector Threshold Temperature  
Coefficient  
−40°C Topt 85°C  
±100  
ppm/°C  
=
=
∗Note1:Minimum operating voltage means the value of input voltage when output voltage maintains 0.1V or less. (In  
the case of Nch Open Drain Output type, the output pin is pulled up with a resistance of 470k to 5.0V.)  
Ω
∗Note2:In the case of CMOS Output type: The time interval between the rising edge of VDD input pulse from 0.7V  
to (+VDET)+2.0V and output voltage level becoming to ((+VDET)+2.0V)/2.  
In the case of Nch Open Drain Output type: The output pin is pulled up with a resistance of 470kΩ to  
5.0V, the time interval between the rising edge of VDD input pulse from 0.7V to (+VDET)+2.0V and output  
voltage level becoming to 2.5V.  
9
R3111x  
TIMING CHART  
Supply  
Voltage  
Released Voltage +VDET  
Detector Threshold -VDET  
Detector Threshold  
Hysteresis  
Detector Threshold  
Hysteresis  
Detector Threshold  
Hysteresis  
DD  
(V  
)
Minimum Operating Voltage VDDL  
GND  
Pull-up Voltage  
Output  
Voltage  
OUT  
(V  
)
GND  
PLH  
t
PLH  
t
PLH  
t
R3111xxxxA  
R3111xxxxB  
R3111xxxxC  
DEFINITION OF OUTPUT DELAY TIME  
Output Delay Time (tPLH) is defined as follows:  
1. In the case of Nch Open Drain Output:(R3111xxxxA/B)  
Under the condition of the output pin (OUT) is pulled up through a resistor of 470kΩ to 5V, the time interval  
between the rising edge of VDD pulse from 0.7V to (+VDET)+2.0V and becoming of the output voltage to 2.5V.  
2. In the case of CMOS Output:(R3111xxxxC)  
The time interval between the rising edge of VDD pulse from 0.7V to (+VDET)+2.0V and becoming of the output  
voltage to ((+VDET)+2.0V)/2.  
DET  
+V +2.0V  
DET  
+V +2.0V  
DET  
+V +2.0V  
Supply  
Supply  
Supply  
Voltage  
DD  
(V )  
Voltage  
DD  
(V )  
Voltage  
DD  
(V )  
0.7V  
GND  
0.7V  
GND  
0.7V  
GND  
5.0V  
2.5V  
GND  
5.0V  
2.5V  
GND  
DET  
+V +2.0V  
Output  
Voltage  
OUT  
Output  
Voltage  
OUT  
DET  
+V +2.0V  
2
Output  
(V  
)
(V  
)
Voltage  
GND  
OUT  
(V  
)
PHL  
t
PLH  
t
PHL  
t
PLH  
t
PHL  
t
PLH  
t
Nch Open Drain Output  
(R3111xxxxA)  
Nch Open Drain Output  
(R3111xxxxB)  
CMOS Output  
(R3111xxxxC)  
10  
R3111x  
11  
R3111x  
ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD  
• R3111x09x to R3111x60x  
Detector Threshold  
Detector Threshold  
Supply Current 1  
Supply Current 2  
Hysteresis  
Part  
−VDET[V]  
VHYS[V]  
[
]
[
]
Number  
ISS1 µA  
Typ.  
ISS2 µA  
Typ.  
Min.  
Typ.  
0.900  
1.000  
1.100  
1.200  
1.300  
1.400  
1.500  
1.600  
1.700  
1.800  
1.900  
2.000  
2.100  
2.200  
2.300  
2.400  
2.500  
2.600  
2.700  
2.800  
2.900  
3.000  
3.100  
3.200  
3.300  
3.400  
3.500  
3.600  
3.700  
3.800  
3.900  
4.000  
4.100  
4.200  
4.300  
4.400  
4.500  
4.600  
4.700  
4.800  
4.900  
5.000  
5.100  
5.200  
5.300  
5.400  
5.500  
5.600  
5.700  
5.800  
5.900  
6.000  
Max.  
Min.  
Typ.  
0.045  
0.050  
0.055  
0.060  
0.065  
0.070  
0.075  
0.080  
0.085  
0.090  
0.095  
0.100  
0.105  
0.110  
0.115  
0.120  
0.125  
0.130  
0.135  
0.140  
0.145  
0.150  
0.155  
0.160  
0.165  
0.170  
0.175  
0.180  
0.185  
0.190  
0.195  
0.200  
0.205  
0.210  
0.215  
0.220  
0.225  
0.230  
0.235  
0.240  
0.245  
0.250  
0.255  
0.260  
0.265  
0.270  
0.275  
0.280  
0.285  
0.290  
0.295  
0.300  
Max.  
0.063  
0.070  
0.077  
0.084  
0.091  
0.098  
0.105  
0.112  
0.119  
0.126  
0.133  
0.140  
0.147  
0.154  
0.161  
0.168  
0.175  
0.182  
0.189  
0.196  
0.203  
0.210  
0.217  
0.224  
0.231  
0.238  
0.245  
0.252  
0.259  
0.266  
0.273  
0.280  
0.287  
0.294  
0.301  
0.308  
0.315  
0.322  
0.329  
0.336  
0.343  
0.350  
0.357  
0.364  
0.371  
0.378  
0.385  
0.392  
0.399  
0.406  
0.413  
0.420  
Condition  
Max.  
Condition  
Max.  
2.7  
R3111x09xx  
R3111x10xx  
R3111x11xx  
R3111x12xx  
R3111x13xx  
R3111x14xx  
R3111x15xx  
R3111x16xx  
R3111x17xx  
R3111x18xx  
R3111x19xx  
R3111x20xx  
R3111x21xx  
R3111x22xx  
R3111x23xx  
R3111x24xx  
R3111x25xx  
R3111x26xx  
R3111x27xx  
R3111x28xx  
R3111x29xx  
R3111x30xx  
R3111x31xx  
R3111x32xx  
R3111x33xx  
R3111x34xx  
R3111x35xx  
R3111x36xx  
R3111x37xx  
R3111x38xx  
R3111x39xx  
R3111x40xx  
R3111x41xx  
R3111x42xx  
R3111x43xx  
R3111x44xx  
R3111x45xx  
R3111x46xx  
R3111x47xx  
R3111x48xx  
R3111x49xx  
R3111x50xx  
R3111x51xx  
R3111x52xx  
R3111x53xx  
R3111x54xx  
R3111x55xx  
R3111x56xx  
R3111x57xx  
R3111x58xx  
R3111x59xx  
R3111x60xx  
0.882  
0.980  
1.078  
1.176  
1.274  
1.372  
1.470  
1.568  
1.666  
1.764  
1.862  
1.960  
2.058  
2.156  
2.254  
2.352  
2.450  
2.548  
2.646  
2.744  
2.842  
2.940  
3.038  
3.136  
3.234  
3.332  
3.430  
3.528  
3.626  
3.724  
3.822  
3.920  
4.018  
4.116  
4.214  
4.312  
4.410  
4.508  
4.606  
4.704  
4.802  
4.900  
4.998  
5.096  
5.194  
5.292  
5.390  
5.488  
5.586  
5.684  
5.782  
5.880  
0.918  
1.020  
1.122  
1.224  
1.326  
1.428  
1.530  
1.632  
1.734  
1.836  
1.938  
2.040  
2.142  
2.244  
2.346  
2.448  
2.550  
2.652  
2.754  
2.856  
2.958  
3.060  
3.162  
3.264  
3.366  
3.468  
3.570  
3.672  
3.774  
3.876  
3.978  
4.080  
4.182  
4.284  
4.386  
4.488  
4.590  
4.692  
4.794  
4.896  
4.998  
5.100  
5.202  
5.304  
5.406  
5.508  
5.610  
5.712  
5.814  
5.916  
6.018  
6.120  
0.027  
0.030  
0.033  
0.036  
0.039  
0.042  
0.045  
0.048  
0.051  
0.054  
0.057  
0.060  
0.063  
0.066  
0.069  
0.072  
0.075  
0.078  
0.081  
0.084  
0.087  
0.090  
0.093  
0.096  
0.099  
0.102  
0.105  
0.108  
0.111  
0.114  
0.117  
0.120  
0.123  
0.126  
0.129  
0.132  
0.135  
0.138  
0.141  
0.144  
0.147  
0.150  
0.153  
0.156  
0.159  
0.162  
0.165  
0.168  
0.171  
0.174  
0.177  
0.180  
0.9  
0.8  
2.4  
1.0  
3.0  
3.3  
3.6  
3.9  
VDD=  
(−VDET)  
−0.10V  
0.9  
1.0  
1.1  
2.7  
3.0  
3.3  
1.1  
1.2  
1.3  
VDD=  
(−VDET)  
−0.13V  
VDD=  
(−VDET)  
+2.0V  
VDD=  
(−VDET)  
−0.16V  
VDD=  
(−VDET)  
−0.20V  
1.2  
3.6  
1.4  
4.2  
*1) In the case of CMOS output type; when the voltage is forced to VDD from 0.7V to (  
+
V
DET  
)
+
2.0V, time interval between the rising edge of VDD and the reaching point at  
2.0V)/2. In the case of Nch open drain output type : The output pin is pulled up to 5V through 470k , and when the voltage is forced to VDD from 0.7V to  
2.0V, time interval between the rising edge of VDD and the reaching point at (( 2.0V)/2.  
((  
+V  
DET  
)
+
Ω
(
+
V
DET)  
+
+VDET)+  
*2) VDD value when Output Voltage is equal or less than 0.1V. In the case of Nch open drain output type, the output pin is pulled up to 5V through 470kΩ  
resistor.  
Condition 1: Topt=25°C  
<
<
85°C  
Condition 2: −40°C  
Topt  
=
=
12  
R3111x  
Output Delay  
Time  
Minimum  
Operating Voltage  
Detector Threshold  
Temperature Coefficient  
Output Current 1 *3  
Output Current 2 *3  
[
]
[
]
[
]
VDDL[V]  
[
]
IOUT1 mA  
IOUT2 mA  
tPLH µs  
∆−VDET/∆Topt ppm/°C  
Condition Typ.  
Condition  
Min.  
Typ.  
Condition  
Min.  
Typ.  
Max.  
Typ.  
Max.  
VDD=  
0.05  
0.2  
0.5  
0.85V  
VDD=  
1.0V  
1.0  
2
2
*
*
Condition 1 Condition 1  
Nch  
VDS=0.05V  
VDD=0.7V  
Nch  
VDS=  
0.5V  
−40°C  
=
0.01  
0.05  
100 *1  
Topt  
0.55  
0.70  
±100  
<
85°C  
=
Condition 2 Condition 2  
0.65  
0.80  
VDD=  
1.5V  
1.0  
2.0  
*3) Output Current (IOUT) of R3111xxxxB has not been described. Please inquire details.  
13  
R3111x  
OPERATION  
• Operation of R3111xxxxA  
DD  
V
Comparator  
Ra  
OUT pin should be pulled-up to  
OUT  
DD  
V
or an external voltage level.  
Rb  
Rc  
Vref  
Nch  
Tr.1  
GND  
Block Diagram (R3111xxxxA)  
1
2
3
4
5
Step  
1
I
2
II  
L
3
II  
4
II  
L
5
I
Released Voltage +VDET  
Detector Threshold  
Hysteresis  
B
A
Comparator (+)  
Pin Input Voltage  
Detector Threshold  
Supply Voltage  
-VDET  
DD  
(V  
)
Comparator Output  
Tr.1  
H
Indefinite  
H
Minimum Operating Voltage VDDL  
GND  
OFF ON Indefinite ON OFF  
Output Tr.  
Nch OFF ON Indefinite ON OFF  
Rb+Rc  
Ra+Rb+Rc  
Pull-up Voltage  
I
DD  
×V  
Output  
Output Voltage  
Delay Time  
OUT  
(V  
)
Rb  
Ra+Rb  
II  
DD  
×V  
PLH  
t
GND  
Operation Diagram  
• Explanation of operation  
Step 1. The output voltage is equal to the pull-up voltage.  
>
Step 2. At Point “A”, Vref VDD×(Rb+Rc)/(Ra+Rb+Rc) is true, as a result, the output of comparator is reversed  
=
from "H" to "L", therefore the output voltage becomes the GND level. The voltage level of Point A means  
a detector threshold voltage (−VDET).  
Step 3. When the supply voltage is lower than the minimum operating voltage, the operation of the output  
transistor becomes indefinite. The output voltage is equal to the pull-up voltage.  
Step 4. The output Voltage is equal to the GND level.  
<
Step 5. At Point “B”, Vref VDD×Rb/(Ra+Rb) is true, as a result, the output of comparator is reversed from "L" to  
=
"H", then the output voltage is equal to the pull-up voltage. The voltage level of Point B means a released  
voltage (+VDET).  
∗) The difference between a released voltage and a detector threshold voltage is a detector threshold hysteresis.  
14  
R3111x  
• Operation of R3111xxxxB  
DD  
V
Comparator  
Ra  
OUT pin should be pulled-up to  
OUT  
DD  
V
or an external voltage level.  
Rb  
Rc  
Vref  
Nch  
Tr.1  
GND  
Block Diagram (R3111xxxxB)  
1
2
3
Step  
1
I
2
II  
3
I
Released Voltage +VDET  
Detector Threshold  
Hysteresis  
B
A
Comparator (+)  
Pin Input Voltage  
Detector Threshold  
Supply Voltage  
-VDET  
DD  
(V  
)
Comparator Output  
Tr.1  
L
H
L
Minimum Operating Voltage VDDL  
GND  
OFF ON OFF  
ON OFF ON  
Output Tr.  
Nch  
Rb+Rc  
Ra+Rb+Rc  
Pull-up Voltage  
I
DD  
×V  
Output  
Output Voltage  
Delay Time  
OUT  
(V  
)
Rb  
Ra+Rb  
II  
DD  
×V  
PLH  
t
GND  
Operation Diagram  
• Explanation of operation  
Step 1. The output voltage is equal to the GND level.  
>
Step 2. At Point “A”, Vref VDD×(Rb+Rc)/(Ra+Rb+Rc) is true, as a result, the output of comparator is reversed  
=
from "L" to "H", therefore the output voltage becomes the pull-up voltage. The voltage level of Point A  
means a detector threshold voltage (−VDET).  
<
Step 3. At Point “B”, Vref VDD×Rb/(Ra+Rb) is true, as a result, the output of comparator is reversed from "H" to  
=
"L", then the output voltage is equal to the GND level. The voltage level of Point B means a released  
voltage (+VDET).  
∗) The difference between a released voltage and a detector threshold voltage is a detector threshold hysteresis.  
15  
R3111x  
• Operation of R3111xxxxC  
DD  
V
Comparator  
Ra  
Pch  
Nch  
OUT  
GND  
Rb  
Rc  
Vref  
Tr.1  
Block Diagram (R3111xxxxC)  
1
2
3
4
5
Step  
1
I
2
II  
L
3
II  
4
II  
L
5
I
Released Voltage +VDET  
A
Detector Threshold  
Hysteresis  
B
Comparator (−)  
Pin Input Voltage  
Detector Threshold -VDET  
Supply Voltage  
DD  
(V  
)
Comparator Output  
Tr.1  
H
Indefinite  
H
Minimum Operating Voltage VDDL  
OFF ON Indefinite ON OFF  
GND  
Pch ON OFF Indefinite OFF ON  
Nch OFF ON Indefinite ON OFF  
Output Tr.  
Rb+Rc  
Ra+Rb+Rc  
I
DD  
×V  
Output  
Delay Time  
Output Voltage  
OUT  
(V  
)
Rb  
Ra+Rb  
PLH  
t
II  
DD  
×V  
GND  
Operation Diagram  
• Explanation of operation  
Step 1. The output voltage is equal to the supply voltage (VDD).  
>
Step 2. At Point “A”, Vref VDD×(Rb+Rc)/(Ra+Rb+Rc) is true, as a result, the output of comparator is reversed  
=
from "H" to "L", therefore the output voltage becomes the GND level. The voltage level of Point A  
means a detector threshold voltage (−VDET).  
Step 3. When the supply voltage is lower than the minimum operating voltage, the operation of the output  
transistor becomes indefinite.  
Step 4. The output Voltage is equal to the GND level.  
<
Step 5. At Point “B”, Vref VDD×Rb/(Ra+Rb) is true, as a result, the output of comparator is reversed from "L" to  
=
"H", then the output voltage is equal to the supply voltage (VDD). The voltage level of Point B means a  
released voltage (+VDET).  
∗) The difference between a released voltage and a detector threshold voltage is a detector threshold hysteresis.  
16  
R3111x  
TEST CIRCUITS  
SS  
I
5V  
DD  
DD  
V
V
470Ω  
R3111x  
Series  
R3111x  
Series  
IN  
V
IN  
V
OUT  
V
OUT  
GND  
GND  
Supply Current Test Circuit  
Detector Threshold Test Circuit  
(Pull-up circuit is not necessary for  
CMOS Output type.)  
DD  
V
DS  
V
DD  
V
OUT  
I
OUT  
I
R3111x  
Series  
R3111x  
IN  
V
IN  
V
Series  
OUT  
OUT  
DD  
V
DS  
−V  
DS  
V
GND  
GND  
Nch Driver Output Current Test Circuit  
Pch Driver Output Current Test Circuit  
∗Apply to CMOS Output type only  
5V  
DET  
+V +2.0V  
5V  
DET  
+V +2.0V  
IN  
R
DD  
V
OUT  
R
0.7V  
470kΩ  
OUT  
R
0.7V  
470kΩ  
OUT  
SS  
V
470kΩ  
OUT  
SS  
V
R3111x  
Series  
DD  
V
R3111x  
Series  
OUT  
OUT  
GND  
P.G.  
P.G.  
OUT  
C
GND  
IN  
C
DS  
V
DS  
V
Output Delay Time Test Circuit (1)  
Output Delay Time Test Circuit (2)  
(Pull-up circuit is not necessary for  
CMOS Output type.)  
17  
R3111x  
TYPICAL CHARACTERISTICS  
1) Supply Current vs. Input Voltage  
R3111x09xC  
R3111x27xC  
2.5  
2.0  
1.5  
1.0  
Topt=85°C  
Topt=85°C  
2.0  
1.5  
25°C  
25°C  
1.0  
-40°C  
-40°C  
0.5  
0.0  
0.5  
0.0  
0
2
4
6
8
10  
0
2
4
6
8
10  
Input Voltage VIN(V)  
Input Voltage VIN(V)  
R3111x45xC  
2.0  
Topt=85°C  
25°C  
1.5  
1.0  
0.5  
0.0  
-40°C  
0
2
4
6
8
10  
Input Voltage VIN(V)  
2) Detector Threshold Hysteresis vs. Temperature  
R3111x09xC  
R3111x27xC  
1.00  
2.9  
2.8  
2.7  
0.98  
0.96  
+VDET  
-VDET  
0.94  
+VDET  
0.92  
0.90  
-VDET  
0.88  
2.6  
2.5  
0.86  
0.84  
-60 -40 -20  
0
20 40 60 80 100  
-60 -40 -20  
0
20 40 60 80 100  
Temperature Topt(°C)  
Temperature Topt(°C)  
18  
R3111x  
R3111x45xC  
4.8  
4.7  
4.6  
+VDET  
4.5  
4.4  
-VDET  
-60 -40 -20  
0
20 40 60 80 100  
Temperature Topt(°C)  
3) Output Voltage vs. Input Voltage  
R3111x09xC  
R3111x09xA  
5V Pull-up 470kΩ  
1.6  
1.4  
1.2  
1.0  
6
5
4
3
2
Topt=-40°C  
25°C  
0.8  
85°C  
0.6  
25°C  
0.4  
85°C  
Topt=-40°C  
1
0
0.2  
0.0  
0
0.2 0.4 0.6 0.8  
1
1.2 1.4 1.6  
0
0.2 0.4 0.6 0.8  
1
1.2 1.4 1.6  
Input Voltage VIN(V)  
Input Voltage VIN(V)  
R3111x27xC  
R3111x27xA  
5V Pull-up 470kΩ  
4.0  
6
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
5
4
3
2
Topt=-40°C  
25°C  
85°C  
85°C  
25°C  
Topt=-40°C  
1.5  
Input Voltage VIN(V)  
1
0
0.5  
0.0  
0
0.5  
1
2
2.5  
3
3.5  
4
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
Input Voltage VIN(V)  
19  
R3111x  
R3111x45xC  
R3111x45xA  
5V Pull-up 470kΩ  
6
6
5
4
3
2
Topt=-40°C  
5
4
3
2
25°C  
85°C  
85°C  
25°C  
Topt=-40°C  
1
0
1
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input Voltage VIN(V)  
Input Voltage VIN(V)  
4) Nch Driver Output Current vs. VDS  
R3111x09xC  
R3111x09xC  
Topt=25°C  
Topt=25°C  
700  
600  
300  
250  
200  
150  
100  
V
DD=0.85V  
V
DD=0.8V  
0.7V  
500  
400  
300  
200  
0.7V  
50  
0
100  
0
0
0.2  
0.4  
DS(V)  
0.6  
0.8  
0
0.02  
0.04  
0.06  
0.08  
0.1  
V
V
DS(V)  
R3111x27xC  
R3111x27xC  
Topt=25°C  
Topt=25°C  
20  
18  
16  
14  
300  
250  
200  
150  
100  
V
DD=2.5V  
2.0V  
V
DD=0.8V  
12  
10  
8
0.7V  
6
4
1.5V  
50  
0
2
0
0
0.5  
1
1.5  
DS(V)  
2
2.5  
0
0.02  
0.04  
0.06  
0.08  
0.1  
V
VDS(V)  
20  
R3111x  
R3111x45xC  
R3111x45xC  
Topt=25°C  
Topt=25°C  
60  
50  
40  
30  
300  
250  
200  
150  
100  
V
DD=4.5V  
4.0V  
V
DD=0.8V  
3.5V  
3.0V  
0.7V  
20  
10  
0
2.5V  
2.0V  
50  
0
1.5V  
1.5  
0
0.5  
1
2
2.5  
3
3.5  
4
4.5  
0
0.02  
0.04  
0.06  
0.08  
0.1  
V
DS(V)  
VDS(V)  
5) Nch Driver Output Current vs. Input Voltage  
R3111x09xC  
R3111x27xC  
900  
14  
12  
10  
800  
700  
600  
Topt=-40°C  
25°C  
85°C  
8
6
4
2
0
500  
Topt=-85°C  
400  
300  
25°C  
200  
100  
-40°C  
0
0
0.2  
0.4  
0.6  
0.8  
1
0
0.5  
1
1.5  
1
2.5  
3
Input Voltage VIN(V)  
Input Voltage VIN(V)  
R3111x45xC  
25  
20  
15  
10  
5
Topt=-40°C  
25°C  
85°C  
0
0
1
2
3
4
5
6
Input Voltage VIN(V)  
21  
R3111x  
6) Pch Driver Output Current vs. Input Voltage  
R3111x09xC  
R3111x27xC  
Topt=25°C  
Topt=25°C  
1.4  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
1.2  
V
DS=0.7V  
V
DS=2.1V  
1.0  
0.8  
0.6  
0.4  
1.5V  
1.0V  
0.5V  
0.5V  
0.2  
0.0  
0.5  
0.0  
0
2
4
6
8
0
1
2
3
4
5
6
7
Input Voltage VIN(V)  
Input Voltage VIN(V)  
R3111x45xC  
Topt=25°C  
4.5  
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
V
DS=2.1V  
1.5V  
1.0V  
0.5V  
0.5  
0.0  
0
2
4
6
8
10  
Input Voltage VIN(V)  
7) Output Delay Time vs. Load Capacitance (Topt=25°C)  
R3111x09xA  
R3111x27xA  
100  
10  
1
100  
10  
1
tPLH  
tPHL  
tPLH  
0.1  
0.1  
tPHL  
0.01  
0.01  
0.001  
0.001  
0.0001  
0.001  
0.01  
0.1  
0.0001  
0.001  
0.01  
0.1  
Load Capacitance COUT(µF)  
Load Capacitance COUT(µF)  
22  
R3111x  
R3111x45xA  
100  
10  
1
t
PLH  
PHL  
0.1  
t
0.01  
0.001  
0.0001  
0.001  
0.01  
0.1  
Load Capacitance COUT(µF)  
8) Output Delay Time vs. Input Pin Capacitance  
R3111x09xA  
R3111x27xA  
100  
100  
10  
1
10  
t
PHL  
PLH  
1
t
t
PLH  
PHL  
0.1  
0.1  
t
0.01  
0.01  
0.001  
0.001  
0.0001  
0.001  
0.01  
0.1  
0.0001  
0.001  
0.01  
0.1  
Input Pin Capacitance CIN(µF)  
Input Pin Capacitance CIN(µF)  
R3111x45xA  
100  
10  
1
t
t
PLH  
PHL  
0.1  
0.01  
0.001  
0.001  
0.01  
0.1  
1
Input Pin Capacitance CIN(µF)  
23  
R3111x  
TYPICAL APPLICATION  
• R3111xxxxA CPU Reset Circuit (Nch Open Drain Output)  
Case 1.Input Voltage to R3111xxxxA is equal to  
Input Voltage to CPU  
Case 2.Input Voltage to R3111xxxxA is unequal to  
Input Voltage to CPU  
VDD  
VDD  
VDD2  
VDD  
R
VDD  
R
470kΩ  
470kΩ  
VDD  
CPU  
VDD  
CPU  
RESET  
R3111xxxxA  
Series  
R3111xxxxA  
Series  
RESET  
GND  
OUT  
OUT  
GND  
GND  
GND  
• R3111xxxxC CPU Reset Circuit (CMOS Output)  
VDD  
VDD  
VDD  
CPU  
R3111xxxxC  
Series  
RESET  
GND  
OUT  
GND  
• R3111xxxxA Output Delay Time Circuit 1  
• R3111xxxxA Output Delay Time Circuit 2  
(Nch Open Drain Output)  
(Nch Open Drain Output)  
VDD  
VDD  
VDD  
R
470kΩ  
VDD  
CPU  
VDD  
CPU  
R1  
R2  
470kΩ  
100kΩ  
R3111xxxxA  
Series  
R3111xxxxA  
Series  
RESET  
GND  
RESET  
GND  
OUT  
VDD  
OUT  
GND  
GND  
• Memory Back-up Circuit  
DD  
V
CC  
V
D1  
CC  
V
CC  
V
CC  
V
CC  
V
D2  
Y1  
Y2  
Y3  
Y4  
A
B
C
RAM1  
RAM2  
RAM3  
RAM4  
GND CS GND CS GND CS GND CS  
GND  
DD  
V
OUT  
R3111xxxxC  
Series  
GND  
24  
R3111x  
• Voltage level Indicator Circuit (lighted when the power runs out)  
(Nch Open Drain Output)  
VDD  
VDD  
R3111xxxxA  
Series  
OUT  
GND  
• Detector Threshold Adjustable Circuit  
(Nch Open Drain Output)  
Adjusted Detector Threshold  
VDD  
=(−VDET)×(Ra+Rb)/Rb  
Ra  
Rb  
OUT  
VDD  
C
R3111xxxxA  
Series  
Hysteresis Voltage  
=(VHYS)×(Ra+Rb)/Rb  
+
∗) If the value of Ra is set excessively large, voltage  
drop may occur caused by the supply current of IC  
itself, and detector threshold may vary.  
GND  
• Window Comparator Circuit  
(Nch Open Drain Output)  
VDET1  
VDD  
VDD  
VDET2  
VDD  
R3111xxxxA  
Series  
OUT  
DD  
V
OUT  
VSS  
GND  
OUT  
R3111xxxxA  
Series  
DET  
V
1
OUT  
GND  
VSS  
• Over-charge Preventing Circuit  
R1  
D1  
Light  
R2  
R4  
DD  
V
R3111xxxxC  
Series  
R3 OUT  
GND  
25  
R3111x  
TECHNICAL NOTES  
When R3111xxxxA/B (Nch Open Drain Output Type) is used in Figure A or Figure B, if impedance of Voltage  
Supply pin, VDD and VDD of this IC is large, detector threshold level would shift by voltage dropdown caused by  
the consumption current of the IC itself. Released voltage may also shift and delay time for start-up might be  
generated by this usage.  
When R3111xxxxC (CMOS Output Type) is used in Figure A or Figure B, Output level could be unstable by  
cross conduction current which is generated at detector threshold level or at released voltage level, therefore, do  
not use this IC with the connection in Figure A or Figure B.  
The connection in Figure C may cause the oscillation in both R3111xxxxC (CMOS Output) and R3111xxxxA/B  
(Nch Open Drain Output), therefore do not use R3111x Series with the connection in Figure C.  
DD  
V
DD  
V
DD  
V
R1  
R1  
R1  
DD  
V
DD  
V
R2  
R3111x  
Series  
R3111x  
Series  
R3111x  
Series  
OUT  
OUT  
OUT  
R2  
GND  
GND  
GND  
Figure A  
Figure B  
Figure C  
26  
PE-TO-92-0611  
PACKAGE INFORMATION  
• TO-92 (SC-43A)  
Unit: mm  
PACKAGE DIMENSIONS  
5.2 Max.  
4.2 Max.  
4.2Max.  
5.2Max.  
0.6 Max.  
0.6Max.  
0.5 Max.  
0.55Max.  
0.5Max.  
0.55  
Max.  
+0.4  
–0.1  
2.5  
3
1
2
1.27  
2.54  
2
1
3
TAPING SPECIFICATION  
12.7±1.0  
(Note) When taping is performed,the pins of TO-92 are  
subjected to a particular forming.  
*
1.45 Max.  
0.7±0.2  
φ4.0±0.2  
12.7± 0.3  
: Mark Side  
(Note) TZ type tape is not in the form of a reel,but is  
*
RF  
RR  
When TZ type tape is  
pulled out from the  
direction B  
When TZ type tape is  
pulled out from the  
direction F  
packed in a zigzag state in box.Therefore,the  
tape can be used as either an RF type tape or  
an RR type tape,depending upon the pulling out  
direction (B or F).  
(Note)  
User Direction of Feed  
TAPING REEL DIMENSIONS  
(RF, RR)  
PACKING BOX DIMENSIONS (TZ)  
(1reel=2000pcs)  
(1box=2500pcs)  
53  
43  
47  
335  
PE-TO-92-0611  
PACKAGE INFORMATION  
POWER DISSIPATION (TO-92)  
This specification is at mounted on board.  
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Free Air  
300mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.3W=333°C/W  
500  
400  
300  
200  
100  
0
Free Air  
0
25  
50  
75 85 100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
PE-SOT-89-0512  
PACKAGE INFORMATION  
• SOT-89 (SC-62)  
Unit: mm  
PACKAGE DIMENSIONS  
4.5 0.1  
1.6 0.2  
1.5 0.1  
0.4 0.1  
∅1.0  
3
1
2
0.4 0.1  
0.47  
0.1  
0.42 0.2  
0.42 0.2  
1.5 0.1  
1.5 0.1  
TAPING SPECIFICATION (T1: Standard Type)  
+0.1  
∅1.5  
0
4.0 0.1  
2.0 0.05  
0.3 0.1  
5.0  
2.5MAX.  
8.0 0.1  
∅1.6 0.1  
T 2  
T 1  
User Direction of Feed  
TAPING REEL DIMENSIONS  
(1reel=1000pcs)  
15.4 1.0  
13 0.3  
21 0.8  
2
0.5  
PE-SOT-89-0512  
PACKAGE INFORMATION  
POWER DISSIPATION (SOT-89)  
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.  
This specification is based on the measurement at the condition below:  
Measurement Conditions  
Standard Land Pattern  
Environment  
Board Material  
Board Dimensions  
Copper Ratio  
Mounting on Board (Wind velocity=0m/s)  
Glass cloth epoxy plactic (Double sided)  
50mm × 50mm × 1.6mm  
Top side : Approx. 10% , Back side : Approx. 100%  
Through-hole  
-
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Standard Land Pattern  
900mW  
Free Air  
500mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.9W=111°C/W  
200°C/W  
50  
1000  
900  
On Board  
750  
500  
250  
0
Free Air  
0
25  
50  
75  
100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
Measurement Board Pattern  
IC Mount Area (Unit : mm)  
RECOMMENDED LAND PATTERN (SOT-89)  
2.0  
45°  
1.0  
1.0  
1.0  
1.5  
1.5  
(Unit : mm)  
PE-SOT-23-5-0610  
PACKAGE INFORMATION  
• SOT-23-5 (SC-74A)  
Unit: mm  
PACKAGE DIMENSIONS  
2.9 0.2  
1.9 0.2  
+0.2  
−0.1  
1.1  
(0.95)  
(0.95)  
0.8 0.1  
5
4
0 to 0.1  
1
2
3
+0.1  
−0.05  
0.15  
0.4 0.1  
TAPING SPECIFICATION  
4.0±0.1  
+0.1  
0
φ1.5  
2.0±0.05  
0.3±0.1  
3.3  
4.0±0.1  
2.0Max.  
∅1.1 0.1  
TR  
User Direction of Feed  
TAPING REEL DIMENSIONS REUSE REEL (EIAJ-RRM-08Bc)  
(1reel=3000pcs)  
11.4 1.0  
9.0 0.3  
2 0.5  
21 0.8  
PE-SOT-23-5-0610  
PACKAGE INFORMATION  
POWER DISSIPATION (SOT-23-5)  
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.  
This specification is based on the measurement at the condition below:  
(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)  
Measurement Conditions  
Standard Land Pattern  
Environment  
Board Material  
Board Dimensions  
Copper Ratio  
Mounting on Board (Wind velocity=0m/s)  
Glass cloth epoxy plactic (Double sided)  
40mm × 40mm × 1.6mm  
Top side : Approx. 50% , Back side : Approx. 50%  
Through-hole  
φ0.5mm × 44pcs  
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Standard Land Pattern  
420mW  
Free Air  
250mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.42W=263°C/W  
400°C/W  
600  
40  
500  
On Board  
420  
400  
Free Air  
300  
250  
200  
100  
0
0
25  
50  
75 85 100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
Measurement Board Pattern  
IC Mount Area Unit : mm  
RECOMMENDED LAND PATTERN  
0.7 MAX.  
1.0  
2.4  
0.95  
1.9  
0.95  
(Unit: mm)  
PE-SOT-23-3-0510  
PACKAGE INFORMATION  
• SOT-23-3 (SC-59A)  
Unit: mm  
PACKAGE DIMENSIONS  
1.4MAX.  
+0.2  
2.9±0.2  
1.1  
–0.1  
0.4±0.1  
0.8  
3
0 to 0.1  
1
2
+0.1  
–0.06  
0.16  
(0.95)  
(0.95)  
1.9±0.2  
TAPING SPECIFICATION (T1: Standard Type)  
4.0±0.1  
+0.1  
0
1.5  
0.3±0.1  
2.0±0.05  
3.3  
4.0±0.1  
2.0MAX.  
1.1±0.1  
TR  
User Direction of Feed  
TAPING REEL DIMENSIONS  
(1reel=3000pcs)  
11.4±1.0  
9.0±0.3  
2±0.5  
21±0.8  
PE-SOT-23-3-0510  
PACKAGE INFORMATION  
POWER DISSIPATION (SOT-23-3)  
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.  
This specification is based on the measurement at the condition below:  
(Power Dissipation (SOT-23-3) is substitution of SOT-23-6.)  
Measurement Conditions  
Standard Land Pattern  
Environment  
Board Material  
Board Dimensions  
Copper Ratio  
Mounting on Board (Wind velocity=0m/s)  
Glass cloth epoxy plactic (Double sided)  
40mm × 40mm × 1.6mm  
Top side : Approx. 50% , Back side : Approx. 50%  
Through-hole  
φ0.5mm × 44pcs  
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Standard Land Pattern  
420mW  
Free Air  
250mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.42W=263°C/W  
400°C/W  
600  
40  
500  
On Board  
420  
400  
Free Air  
300  
250  
200  
100  
0
0
25  
50  
75 85 100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
Measurement Board Pattern  
IC Mount Area Unit : mm  
RECOMMENDED LAND PATTERN (SOT-23-3)  
0.7 MAX.  
1.0  
2.4  
0.95  
1.9  
0.95  
(Unit: mm)  
PE-SC-82AB-0512  
PACKAGE INFORMATION  
• SC-82AB  
Unit: mm  
PACKAGE DIMENSIONS  
2 0.2  
1.3 0.2  
0.9 0.1  
(0.7)  
0.3 0.1  
0.3 0.1  
4
3
0 to 0.1  
1
0.3 0.1  
2
+0.1  
−0.06  
0.16  
0.4 0.1  
0.05  
TAPING SPECIFICATION  
+0.1  
0
4.0 0.1  
∅1.5  
0.2 0.1  
2.0 0.05  
2.2  
4.0 0.1  
1.6MAX.  
∅1.1 0.1  
TR  
User Direction of Feed  
TAPING REEL DIMENSIONS  
(1reel=3000pcs)  
11.4 1.0  
9.0 0.3  
2 0.5  
21 0.8  
PE-SC-82AB-0512  
PACKAGE INFORMATION  
POWER DISSIPATION (SC-82AB)  
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board.  
This specification is based on the measurement at the condition below:  
Measurement Conditions  
Standard Land Pattern  
Environment  
Board Material  
Board Dimensions  
Copper Ratio  
Mounting on Board (Wind velocity=0m/s)  
Glass cloth epoxy plactic (Double sided)  
40mm × 40mm × 1.6mm  
Top side : Approx. 50% , Back side : Approx. 50%  
Through-hole  
φ0.5mm × 44pcs  
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Standard Land Pattern  
380mW  
Free Air  
150mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.38W=263°C/W  
667°C/W  
600  
500  
40  
On Board  
380  
150  
400  
300  
200  
100  
0
Free Air  
0
25  
50  
75 85 100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
Measurement Board Pattern  
IC Mount Area (Unit : mm)  
RECOMMENDED LAND PATTERN  
0.65 0.65  
0.6  
0.6  
0.6  
0.8  
0.65 0.6  
(Unit: mm)  
PE-SON1612-6-0510  
PACKAGE INFORMATION  
• SON1612-6  
Unit: mm  
PACKAGE DIMENSIONS  
0.5  
0.3TYP.  
1.6 0.1  
6
4
1
3
0.125 0.055  
0.08  
0.22 0.05  
0.08 M  
TAPING SPECIFICATION  
4.0 0.1  
+0.1  
0
1.5  
2.0 0.05  
0.25 0.1  
1.1 0.1  
1.75  
4.0 0.1  
1.1MAX.  
TR  
User Direction of Feed  
TAPING REEL DIMENSIONS  
(1reel=4000pcs)  
11.4 1.0  
9.0 0.3  
2 0.5  
21 0.8  
PE-SON1612-6-0510  
PACKAGE INFORMATION  
Power Dissipation (SON1612-6)  
This specification is at mounted on board.  
Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the  
measurement at the condition below:  
Measurement Conditions  
Standard Land Pattern  
Environment  
Board Material  
Board Dimensions  
Copper Ratio  
Mounting on Board (Wind velocity=0m/s)  
Glass cloth epoxy plactic (Double sided)  
40mm × 40mm × 1.6mm  
Top side : Approx. 50%, Back side : Approx.50%  
Through-hole  
φ0.5mm × 24pcs  
Measurement Result  
(Topt=25°C,Tjmax=125°C)  
Standard Land Pattern  
500mW  
Power Dissipation  
Thermal Resistance  
θja=(125−25°C)/0.5W=200°C/W  
600  
500  
400  
300  
200  
100  
0
39  
On Board  
27  
40  
0
25  
50  
75 85 100  
125  
150  
Ambient Temperature (°C)  
Power Dissipation  
Measurement Board Pattern  
IC Mount Area Unit : mm  
RECOMMENDED LAND PATTERN  
0.28 0.5  
(Unit: mm)  
ME-R3111E-0310  
MARK INFORMATION  
R3111E SERIES MARK SPECIFICATION  
• TO-92 (SC-43A)  
1
6
8
9
5
to  
: Series Name: R3111 (fixed)  
: Detector Threshold: ex. −VDET=3.0V→30  
: Output Type: Nch→A, CMOS→C  
: Lot Number  
1
5
9
2
6
3
7
4
8
7
,
10 11 12  
12  
to  
ME-R3111H-0310  
MARK INFORMATION  
R3111H SERIES MARK SPECIFICATION  
• SOT-89 (SC-62)  
1
5
4
to  
: Product Code (refer to Part Number vs. Product Code)  
1
2
3
6
,
: Lot Number  
4
6
5
• Part Number vs. Product Code  
Product Code  
Product Code  
Product Code  
Product Code  
Part Number  
Part Number  
Part Number  
Part Number  
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
R3111H091A  
R3111H101A  
R3111H111A  
R3111H121A  
R3111H131A  
R3111H141A  
R3111H151A  
R3111H161A  
R3111H171A  
R3111H181A  
R3111H191A  
R3111H201A  
R3111H211A  
R3111H221A  
R3111H231A  
R3111H241A  
R3111H251A  
R3111H261A  
R3111H271A  
R3111H281A  
R3111H291A  
R3111H301A  
R3111H311A  
R3111H321A  
R3111H331A  
R3111H341A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
0
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
R3111H351A  
R3111H361A  
R3111H371A  
R3111H381A  
R3111H391A  
R3111H401A  
R3111H411A  
R3111H421A  
R3111H431A  
R3111H441A  
R3111H451A  
R3111H461A  
R3111H471A  
R3111H481A  
R3111H491A  
R3111H501A  
R3111H511A  
R3111H521A  
R3111H531A  
R3111H541A  
R3111H551A  
R3111H561A  
R3111H571A  
R3111H581A  
R3111H591A  
R3111H601A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
R3111H091C  
R3111H101C  
R3111H111C  
R3111H121C  
R3111H131C  
R3111H141C  
R3111H151C  
R3111H161C  
R3111H171C  
R3111H181C  
R3111H191C  
R3111H201C  
R3111H211C  
R3111H221C  
R3111H231C  
R3111H241C  
R3111H251C  
R3111H261C  
R3111H271C  
R3111H281C  
R3111H291C  
R3111H301C  
R3111H311C  
R3111H321C  
R3111H331C  
R3111H341C  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
0
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
R3111H351C  
R3111H361C  
R3111H371C  
R3111H381C  
R3111H391C  
R3111H401C  
R3111H411C  
R3111H421C  
R3111H431C  
R3111H441C  
R3111H451C  
R3111H461C  
R3111H471C  
R3111H481C  
R3111H491C  
R3111H501C  
R3111H511C  
R3111H521C  
R3111H531C  
R3111H541C  
R3111H551C  
R3111H561C  
R3111H571C  
R3111H581C  
R3111H591C  
R3111H601C  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
ME-R3111Nxx1-0310  
MARK INFORMATION  
R3111Nxx1 SERIES MARK SPECIFICATION  
• SOT-23-5 (SC-74A)  
1
3
2
4
,
,
: Product Code (refer to Part Number vs. Product Code)  
: Lot Number  
1
2
3
4
• Part Number vs. Product Code  
Product Code  
Product Code  
Product Code  
Product Code  
Part Number  
Part Number  
Part Number  
Part Number  
1
2
1
2
1
2
H
J
1
2
R3111N091A  
R3111N101A  
R3111N111A  
R3111N121A  
R3111N131A  
R3111N141A  
R3111N151A  
R3111N161A  
R3111N171A  
R3111N181A  
R3111N191A  
R3111N201A  
R3111N211A  
R3111N221A  
R3111N231A  
R3111N241A  
R3111N251A  
R3111N261A  
R3111N271A  
R3111N281A  
R3111N291A  
R3111N301A  
R3111N311A  
R3111N321A  
R3111N331A  
R3111N341A  
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
A
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
R3111N351A  
R3111N361A  
R3111N371A  
R3111N381A  
R3111N391A  
R3111N401A  
R3111N411A  
R3111N421A  
R3111N431A  
R3111N441A  
R3111N451A  
R3111N461A  
R3111N471A  
R3111N481A  
R3111N491A  
R3111N501A  
R3111N511A  
R3111N521A  
R3111N531A  
R3111N541A  
R3111N551A  
R3111N561A  
R3111N571A  
R3111N581A  
R3111N591A  
R3111N601A  
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
D
D
D
D
D
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
G
R3111N091C  
R3111N101C  
R3111N111C  
R3111N121C  
R3111N131C  
R3111N141C  
R3111N151C  
R3111N161C  
R3111N171C  
R3111N181C  
R3111N191C  
R3111N201C  
R3111N211C  
R3111N221C  
R3111N231C  
R3111N241C  
R3111N251C  
R3111N261C  
R3111N271C  
R3111N281C  
R3111N291C  
R3111N301C  
R3111N311C  
R3111N321C  
R3111N331C  
R3111N341C  
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R3111N351C  
R3111N361C  
R3111N371C  
R3111N381C  
R3111N391C  
R3111N401C  
R3111N411C  
R3111N421C  
R3111N431C  
R3111N441C  
R3111N451C  
R3111N461C  
R3111N471C  
R3111N481C  
R3111N491C  
R3111N501C  
R3111N511C  
R3111N521C  
R3111N531C  
R3111N541C  
R3111N551C  
R3111N561C  
R3111N571C  
R3111N581C  
R3111N591C  
R3111N601C  
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
L
L
L
L
J
J
J
J
J
J
J
J
L
M
M
M
M
M
M
M
M
M
M
N
N
N
N
N
N
N
N
N
N
P
J
K
K
K
K
K
K
K
K
K
K
L
L
L
L
L
ME-R3111Nxx2-0310  
MARK INFORMATION  
R3111Nxx2x SERIES MARK SPECIFICATION  
• SOT-23-3 (SC-59A)  
1
3
2
4
,
,
: Product Code (refer to Part Number vs. Product Code)  
: Lot Number  
1
2
3
4
• Part Number vs. Product Code  
Product Code  
Product Code  
Product Code  
Product Code  
Part Number  
Part Number  
Part Number  
Part Number  
1
2
1
2
1
H
J
2
1
2
R3111N092A  
R3111N102A  
R3111N112A  
R3111N122A  
R3111N132A  
R3111N142A  
R3111N152A  
R3111N162A  
R3111N172A  
R3111N182A  
R3111N192A  
R3111N202A  
R3111N212A  
R3111N222A  
R3111N232A  
R3111N242A  
R3111N252A  
R3111N262A  
R3111N272A  
R3111N282A  
R3111N292A  
R3111N302A  
R3111N312A  
R3111N322A  
R3111N332A  
R3111N342A  
A
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R3111N352A  
R3111N362A  
R3111N372A  
R3111N382A  
R3111N392A  
R3111N402A  
R3111N412A  
R3111N422A  
R3111N432A  
R3111N442A  
R3111N452A  
R3111N462A  
R3111N472A  
R3111N482A  
R3111N492A  
R3111N502A  
R3111N512A  
R3111N522A  
R3111N532A  
R3111N542A  
R3111N552A  
R3111N562A  
R3111N572A  
R3111N582A  
R3111N592A  
R3111N602A  
D
D
D
D
D
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
G
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
R3111N092C  
R3111N102C  
R3111N112C  
R3111N122C  
R3111N132C  
R3111N142C  
R3111N152C  
R3111N162C  
R3111N172C  
R3111N182C  
R3111N192C  
R3111N202C  
R3111N212C  
R3111N222C  
R3111N232C  
R3111N242C  
R3111N252C  
R3111N262C  
R3111N272C  
R3111N282C  
R3111N292C  
R3111N302C  
R3111N312C  
R3111N322C  
R3111N332C  
R3111N342C  
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R3111N352C  
R3111N362C  
R3111N372C  
R3111N382C  
R3111N392C  
R3111N402C  
R3111N412C  
R3111N422C  
R3111N432C  
R3111N442C  
R3111N452C  
R3111N462C  
R3111N472C  
R3111N482C  
R3111N492C  
R3111N502C  
R3111N512C  
R3111N522C  
R3111N532C  
R3111N542C  
R3111N552C  
R3111N562C  
R3111N572C  
R3111N582C  
R3111N592C  
R3111N602C  
L
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
L
J
L
J
L
J
L
J
M
M
M
M
M
M
M
M
M
M
N
N
N
N
N
N
N
N
N
N
P
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
L
L
L
L
L
ME-R3111Q-070918  
MARK INFORMATION  
R3111Q SERIES MARK SPECIFICATION  
• SC-82AB  
1
3
2
4
,
,
: Product Code (refer to Part Number vs. Product Code)  
: Lot Number  
• Part Number vs. Product Code  
Product Code  
Product Code  
Product Code  
Product Code  
Part Number  
Part Number  
Part Number  
Part Number  
1
2
1
2
1
2
1
2
R3111Q091A  
R3111Q101A  
R3111Q111A  
R3111Q121A  
R3111Q131A  
R3111Q141A  
R3111Q151A  
R3111Q161A  
R3111Q171A  
R3111Q181A  
R3111Q191A  
R3111Q201A  
R3111Q211A  
R3111Q221A  
R3111Q231A  
R3111Q241A  
R3111Q251A  
R3111Q261A  
R3111Q271A  
R3111Q281A  
R3111Q291A  
R3111Q301A  
R3111Q311A  
R3111Q321A  
R3111Q331A  
R3111Q341A  
R3111Q351A  
R3111Q361A  
R3111Q371A  
R3111Q381A  
R3111Q391A  
R3111Q401A  
R3111Q411A  
R3111Q421A  
R3111Q431A  
R3111Q441A  
R3111Q451A  
R3111Q461A  
R3111Q471A  
K
L
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
R3111Q481A  
R3111Q491A  
R3111Q501A  
R3111Q511A  
R3111Q521A  
R3111Q531A  
R3111Q541A  
R3111Q551A  
R3111Q561A  
R3111Q571A  
R3111Q581A  
R3111Q591A  
R3111Q601A  
R3111Q091B  
R3111Q101B  
R3111Q111B  
R3111Q121B  
R3111Q131B  
R3111Q141B  
R3111Q151B  
R3111Q161B  
R3111Q171B  
R3111Q181B  
R3111Q191B  
R3111Q201B  
R3111Q211B  
R3111Q221B  
R3111Q231B  
R3111Q241B  
R3111Q251B  
R3111Q261B  
R3111Q271B  
R3111Q281B  
R3111Q291B  
R3111Q301B  
R3111Q311B  
R3111Q321B  
R3111Q331B  
R3111Q341B  
P
P
R
R
R
R
R
R
R
R
R
R
S
0
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
8
9
0
1
2
3
4
5
6
7
8
9
0
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
R3111Q351B  
R3111Q361B  
R3111Q371B  
R3111Q381B  
R3111Q391B  
R3111Q401B  
R3111Q411B  
R3111Q421B  
R3111Q431B  
R3111Q441B  
R3111Q451B  
R3111Q461B  
R3111Q471B  
R3111Q481B  
R3111Q491B  
R3111Q501B  
R3111Q511B  
R3111Q521B  
R3111Q531B  
R3111Q541B  
R3111Q551B  
R3111Q561B  
R3111Q571B  
R3111Q581B  
R3111Q591B  
R3111Q601B  
R3111Q091C  
R3111Q101C  
R3111Q111C  
R3111Q121C  
R3111Q131C  
R3111Q141C  
R3111Q151C  
R3111Q161C  
R3111Q171C  
R3111Q181C  
R3111Q191C  
R3111Q201C  
R3111Q211C  
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
T
U
U
U
U
U
U
U
U
U
U
V
V
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
9
0
1
2
3
4
5
6
7
8
9
0
1
R3111Q221C  
R3111Q231C  
R3111Q241C  
R3111Q251C  
R3111Q261C  
R3111Q271C  
R3111Q281C  
R3111Q291C  
R3111Q301C  
R3111Q311C  
R3111Q321C  
R3111Q331C  
R3111Q341C  
R3111Q351C  
R3111Q361C  
R3111Q371C  
R3111Q381C  
R3111Q391C  
R3111Q401C  
R3111Q411C  
R3111Q421C  
R3111Q431C  
R3111Q441C  
R3111Q451C  
R3111Q461C  
R3111Q471C  
R3111Q481C  
R3111Q491C  
R3111Q501C  
R3111Q511C  
R3111Q521C  
R3111Q531C  
R3111Q541C  
R3111Q551C  
R3111Q561C  
R3111Q571C  
R3111Q581C  
R3111Q591C  
R3111Q601C  
V
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
V
L
V
L
V
L
V
L
V
L
V
L
V
L
W
W
W
W
W
W
W
W
W
W
X
L
L
M
M
M
M
M
M
M
M
M
M
N
N
N
N
N
N
N
N
N
N
P
P
P
P
P
P
P
P
X
X
X
X
X
X
X
X
X
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Z
ME-R3111D-070918  
MARK INFORMATION  
R3111D SERIES MARK SPECIFICATION  
• SON1612-6  
1
5
4
: Product Code (refer to Part Number vs. Product Code)  
: Lot Number  
to  
1
4
2
5
3
6
6
,
• Part Number vs. Product Code  
Product Code  
Product Code  
Product Code  
Product Code  
Part Number  
Part Number  
Part Number  
Part Number  
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
R3111D091A  
R3111D101A  
R3111D111A  
R3111D121A  
R3111D131A  
R3111D141A  
R3111D151A  
R3111D161A  
R3111D171A  
R3111D181A  
R3111D191A  
R3111D201A  
R3111D211A  
R3111D221A  
R3111D231A  
R3111D241A  
R3111D251A  
R3111D261A  
R3111D271A  
R3111D281A  
R3111D291A  
R3111D301A  
R3111D311A  
R3111D321A  
R3111D331A  
R3111D341A  
R3111D351A  
R3111D361A  
R3111D371A  
R3111D381A  
R3111D391A  
R3111D401A  
R3111D411A  
R3111D421A  
R3111D431A  
R3111D441A  
R3111D451A  
R3111D461A  
R3111D471A  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
0
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
R3111D481A  
R3111D491A  
R3111D501A  
R3111D511A  
R3111D521A  
R3111D531A  
R3111D541A  
R3111D551A  
R3111D561A  
R3111D571A  
R3111D581A  
R3111D591A  
R3111D601A  
R3111D091B  
R3111D101B  
R3111D111B  
R3111D121B  
R3111D131B  
R3111D141B  
R3111D151B  
R3111D161B  
R3111D171B  
R3111D181B  
R3111D191B  
R3111D201B  
R3111D211B  
R3111D221B  
R3111D231B  
R3111D241B  
R3111D251B  
R3111D261B  
R3111D271B  
R3111D281B  
R3111D291B  
R3111D301B  
R3111D311B  
R3111D321B  
R3111D331B  
R3111D341B  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
4
4
5
5
5
5
5
5
5
5
5
5
6
0
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
8
9
0
1
2
3
4
5
6
7
8
9
0
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
R3111D351B  
R3111D361B  
R3111D371B  
R3111D381B  
R3111D391B  
R3111D401B  
R3111D411B  
R3111D421B  
R3111D431B  
R3111D441B  
R3111D451B  
R3111D461B  
R3111D471B  
R3111D481B  
R3111D491B  
R3111D501B  
R3111D511B  
R3111D521B  
R3111D531B  
R3111D541B  
R3111D551B  
R3111D561B  
R3111D571B  
R3111D581B  
R3111D591B  
R3111D601B  
R3111D091C  
R3111D101C  
R3111D111C  
R3111D121C  
R3111D131C  
R3111D141C  
R3111D151C  
R3111D161C  
R3111D171C  
R3111D181C  
R3111D191C  
R3111D201C  
R3111D211C  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
0
1
1
1
1
1
1
1
1
1
1
2
2
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
9
0
1
2
3
4
5
6
7
8
9
0
1
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
R3111D221C  
R3111D231C  
R3111D241C  
R3111D251C  
R3111D261C  
R3111D271C  
R3111D281C  
R3111D291C  
R3111D301C  
R3111D311C  
R3111D321C  
R3111D331C  
R3111D341C  
R3111D351C  
R3111D361C  
R3111D371C  
R3111D381C  
R3111D391C  
R3111D401C  
R3111D411C  
R3111D421C  
R3111D431C  
R3111D441C  
R3111D451C  
R3111D461C  
R3111D471C  
R3111D481C  
R3111D491C  
R3111D501C  
R3111D511C  
R3111D521C  
R3111D531C  
R3111D541C  
R3111D551C  
R3111D561C  
R3111D571C  
R3111D581C  
R3111D591C  
R3111D601C  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明