RP130K201A [RICOH]

LOW NOISE 150mA LDO REGULATOR;


型号：	RP130K201A
厂家：	RICOH ELECTRONICS DEVICES DIVISION
描述：	LOW NOISE 150mA LDO REGULATOR
文件：	总32页 (文件大小：510K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RP130x SERIES

LOW NOISE 150mA LDO REGULATOR

NO.EA-173-131031

OUTLINE

The RP130x Series are CMOS-based positive voltage regulator ICs with high ripple rejection, low dropout

voltage, high output voltage accuracy and extremely low supply current. Each of these ICs consists of a voltage

reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit and a chip enable

circuit.

These ICs have an excellent low supply current performed by CMOS process, moreover they perform with low

dropout voltage due to built-in low ON-resistance. A chip enable function prolongs the battery life.

The input transient response, the load transient response and the ripple rejection have been improved in the

RP130x Series compared with the conventional products. Besides achieving low supply current (Typ.38μA).

The range of the operation voltage is capable from 1.7V to 6.5V and the range of the output voltage is capable

from 1.2V to 5.3V for this product, which is wider range as our conventional product R1114x series.

The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are

DFN(PLP)1010-4, SOT-23-5 and SC-82AB, therefore high density mounting of the ICs on boards is possible.

FEATURES

• Supply Current ........................................................... Typ. 38μA

• Supply Current (Standby Mode) .................................. Typ. 0.1 μA

• Ripple Rejection........................................................... Typ. 80dB (f=1kHz)

• Input Voltage Range .................................................... 1.7V to 6.5V

• Output Voltage Range ................................................. 1.2V to 5.3V (0.1V steps)

(For other voltages, please refer to MARK INFORMATIONS.)

• Output Voltage Accuracy ............................................. ±1.0% (VOUT>2.0V, Topt=25°C)

• Temperature-Drift Coefficient of Output Voltage.......... Typ. ±20ppm/°C

• Dropout Voltage........................................................... Typ. 0.32V (I^OUT=150mA, VOUT=2.8V)

• Line Regulation............................................................ Typ. 0.02%/V

• Packages ..................................................................... DFN(PLP)1010-4, SC-82AB, SOT-23-5

• Built-in Fold Back Protection Circuit ............................ Typ. 40mA

• Ceramic capacitors are recommended to be used with this IC.....0.47μF or more

APPLICATIONS

• Power source for battery-powered equipment.

• Power source for portable communication equipment.

• Power source for electrical appliances such as cameras, VCRs and camcorders.

• Power source for high stable reference voltage.

RP130x

NO.EA-173-131031

BLOCK DIAGRAMS

RP130xxx1A

VDD

VOUT

Vref

Current Limit

GND

RP130xxx1B

RP130xxx1D

VDD

VOUT

Vref

Current Limit

GND

RP130x

NO.EA-173-131031

SELECTION GUIDE

The output voltage, chip enable polarity, auto discharge function, and package, etc. for the ICs can be selected

at the user’s request.

Product Name

RP130Kxx1∗-TR

Package

DFN(PLP)1010-4

SC-82AB

Quantity per Reel

10,000 pcs

Pb Free

Yes

Halogen Free

Yes

3,000 pcs

Yes

RP130Qxx1∗-TR-FE

SOT-23-5

3,000 pcs

Yes

RP130Nxx1∗-TR-FE

xx : Set Output Voltage (V_SET

)

Fixed Type: 12 to 53 Stepwise setting with 0.1V increment in the range from 1.2V to 5.3V

Exception: 1.25V=RP130x121∗5-TR

1.85V=RP130x181∗5-TR

2.85V=RP130x281∗5-TR

∗ : CE pin polarity and auto discharge function at off state are options as follows.

A: active low, without auto discharge function at off state.

B: active high, without auto discharge function at off state.

D: active high, with auto discharge function at off state.

RP130x

NO.EA-173-131031

PIN CONFIGURATIONS

• DFN(PLP)1010-4

• SC-82AB

• SOT-23-5

Top View

Bottom View

(mark side)

∗

PIN DESCRIPTIONS

• DFN(PLP)1010-4

Pin No

Symbol

VOUT

Pin Description

Output Pin

Ground Pin

GND

Chip Enable Pin ("L" Active / "H" Active)

Input Pin

CE / CE

VDD

∗) Tab is GND level. (They are connected to the reverse side of this IC.)

The tab is better to be connected to the GND, but leaving it open is also acceptable.

• SC-82AB

Pin No

Symbol

Pin Description

Chip Enable Pin ("L" Active / "H" Active)

CE / CE

GND

VOUT

Ground Pin

Output Pin

Input Pin

VDD

• SOT-23-5

Pin No

Symbol

VDD

Pin Description

Input Pin

GND

Ground Pin

Chip Enable Pin ("L" Active / "H" Active)

No Connection

CE / CE

VOUT

Output Pin

RP130x

NO.EA-173-131031

ABSOLUTE MAXIMUM RATINGS

Symbol

Item

Rating

7.0

Unit

VIN

Input Voltage

VCE

Input Voltage (CE Pin)

Output Voltage

Output Current

−0.3 to 7.0

−0.3 to V^IN+0.3

200

VOUT

IOUT

Power Dissipation (DFN(PLP)1010-4)^∗

Power Dissipation (SC-82AB)^∗

Power Dissipation (SOT-23-5)^∗

Operating Temperature Range

400

380

420

Topt

Tstg

−40 to 85

−55 to 125

°C

Storage Temperature Range

∗) For Power Dissipation, please refer to PACKAGE INFORMATION.

ABSOLUTE MAXIMUM RATINGS

Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the

permanent damages and may degrade the life time and safety for both device and system using the device

in the field.

The functional operation at or over these absolute maximum ratings is not assured.

RP130x

NO.EA-173-131031

ELECTRICAL CHARACTERISTICS

V_IN=V_SET+1V (V_OUT>1.5V), V_IN=2.5V (V_OUT≤1.5V), I_OUT=1mA, C_IN=C_OUT=0.47µF, unless otherwise noted.

The specifications surrounded by

are guaranteed by Design Engineering at - 40ºC ≤ Ta ≤ 85ºC.

• RP130xxx1A

(Ta=25°C)

Symbol

Item

Conditions

V_SET> 2.0V

Min.

x 0.99

-20

Typ.

Max.

x 1.01

+20

Unit

Ta=25°C

V_SET≤ 2.0V

V_SET> 2.0V

V_SET≤ 2.0V

V_OUT

Output Voltage

x 0.985

-30

x 1.015

+30

-40°C ≤ Ta ≤ 85°C

I_LIM

Output Current Limit

Load Regulation

150

ΔV_OUT

/ΔI_OUT

1mA ≤ I_OUT≤ 150mA

V_DIF

Dropout Voltage

Supply Current

Please see the table (Dropout Voltage) on below page.

I_SS

I_OUT=0mA

V_CE=V_IN

µA

Supply Current

(Standby)

Istandby

0.1

1.0

ΔV_OUT

/ΔV_IN

Line Regulation

_SET+0.5V ≤ V_IN≤ 6.5V

0.02

0.10

6.5

%/V

f=1kHz, Ripple 0.2Vp-p

V_IN=V_SET+1V

I_OUT=30mA

Ripple Rejection

Input Voltage

(In case that V_OUT≤ 2.0V, V_IN=3.0V)

V_IN

1.7

1.0

ppm

/°C

ΔV_OUT

/ΔTa

Output Voltage

Temperature Coefficient

- 40°C ≤ Ta ≤ 85°C

±20

I_SC

Short Current Limit

V_OUT=0V

V_CEH

V_CEL

µA

Input Voltage "H"

Input Voltage "L"

0.4

xV_SET

BW=10Hz to 100kHz

I_OUT=30mA

Output Noise

µVrms

All test items listed under Electrical Characteristics are done under the pulse load condition (Tj≈Ta=25ºC) except for Output

Noise, Ripple Rejection, and Output Voltage Temperature Coefficient.

RP130x

NO.EA-173-131031

V_IN=V_SET+1V (V_OUT>1.5V), V_IN=2.5V (V_OUT≤1.5V), I_OUT=1mA, C_IN=C_OUT=0.47µF, unless otherwise noted.

The specifications surrounded by

are guaranteed by Design Engineering at - 40ºC ≤ Ta ≤ 85ºC.

• RP130xxx1B/D

(Ta=25°C)

Symbol

Item

Conditions

Min.

x 0.99

-20

Typ.

Max.

x 1.01

+20

Unit

V_SET> 2.0V

V_SET≤ 2.0V

V_SET> 2.0V

V_SET≤ 2.0V

Ta=25°C

V_OUT

Output Voltage

x 0.985

-30

x 1.015

+30

-40°C ≤ Ta ≤ 85°C

I_LIM

Output Current Limit

Load Regulation

150

ΔV_OUT

/ΔI_OUT

1mA ≤ I_OUT≤ 150mA

V_DIF

Dropout Voltage

Supply Current

Please see the table (Dropout Voltage) on next page.

I_SS

I_OUT=0mA

V_CE=V_IN

µA

Supply Current

(Standby)

Istandby

0.1

1.0

ΔV_OUT

/ΔV_IN

Line Regulation

_SET+0.5V ≤ V_IN≤ 6.5V

0.02

0.10

6.5

%/V

f=1kHz, Ripple 0.2Vp-p

V_IN=V_SET+1V

I_OUT=30mA

Ripple Rejection

Input Voltage

(In case that V_OUT≤ 2.0V, V_IN=3.0V)

V_IN

1.7

1.0

ppm

/°C

ΔV_OUT

/ΔTa

Output Voltage

Temperature Coefficient

- 40°C ≤ Ta ≤ 85°C

±20

I_SC

Short Current Limit

V_OUT=0V

µA

I_PD

CE Pull-down Current

0.4

V_CEH

V_CEL

Input Voltage "H"

Input Voltage "L"

0.4

xV_SET

BW=10Hz to 100kHz

Output Noise

µVrms

_OUT=30mA

Nch ON Resistance

for Auto Discharge

(D version Only)

V_IN=4.0V

V_CE=0V

R_LOW

All test items listed under Electrical Characteristics are done under the pulse load condition (Tj≈Ta=25ºC) except for Output Noise,

Ripple Rejection, and Output Voltage Temperature Coefficient.

RP130x

NO.EA-173-131031

The specifications surrounded by

are guaranteed by Design Engineering at - 40ºC ≤ Ta ≤ 85ºC.

Dropout Voltage

(Ta=25°C)

Dropout Voltage

_DIF(V)

Output Voltage

V_OUT(V)

Condition

TYP.

0.67

0.54

0.46

0.41

0.32

0.24

MAX.

1.00

0.81

0.68

0.60

0.51

0.37

1.2V ≤ V_SET< 1.5V

1.5V ≤ V_SET< 1.7V

1.7V ≤ V_SET< 2.0V

2.0V ≤ V_SET< 2.5V

2.5V ≤ V_SET< 4.0V

4.0V ≤ V_SET

I_OUT= 150mA

RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)

All of electronic equipment should be designed that the mounted semiconductor devices operate within

the recommended operating conditions. The semiconductor devices cannot operate normally over the

recommended operating conditions, even if when they are used over such conditions by momentary

electronic noise or surge. And the semiconductor devices may receive serious damage when they

continue to operate over the recommended operating conditions.

RP130x

NO.EA-173-131031

TYPICAL APPLICATION

VOUT

VDD

VOUT

RP130x

Series

CE GND

(External Components)

Ceramic Capacitor C2 0.47μF MURATA GRM155B30J474KE18B

TECHNICAL NOTES

When using these ICs, consider the following points:

Phase Compensation

In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For

this purpose, use a capacitor C2 with 0.47μF or more.

If a tantalum capacitor is used, and its ESR (Equivalent Series Resistance) of C2 is large, the loop oscillation

may result. Because of this, select C2 carefully considering its frequency characteristics.

PCB Layout

Make V^DDand GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.

Connect a capacitor C1 with a capacitance value as much as 0.47μF or more between V^DDand GND pin, and as

close as possible to the pins.

Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring as

short as possible.

RP130x

NO.EA-173-131031

PACKAGE INFORMATION

• ^{Power Dissipation (DFN(PLP)1010-4)}

Power Dissipation (P_D) depends on conditions of mounting on board. This specification is based on the

measurement at the condition below:

Measurement Conditions

Standard Test Land Pattern

Environment

Board Material

Board Dimensions

Copper Ratio

Mounting on Board (Wind velocity=0m/s)

Glass cloth epoxy plastic (Double sided)

40mm x 40mm x 1.6mm

Top side: Approx. 50%, Back side: Approx. 50%

φ 0.54mm x 24pcs

Through-holes

Measurement Result

(Ta=25°C, Tjmax=125°C)

Standard Test Land Pattern

400mW(Tjmax=125°C)

500mW(Tjmax=150°C)

Power Dissipation

θja = (125-25°C)/0.4W= 250°C/W

θjc=67°C/W

Thermal Resistance

600

500

400

300

200

100

125

150

Measurement Board Pattern

IC Mount Area (Unit:mm)

Ambience Temperature (°C)

Power Dissipation

The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C.

Operating the IC in the shaded area in the graph might have an influence it's lifetime.

Operating time must be within the time limit described in the table below, in case of operating in the shaded area.

Estimated years

Operating Time

(Operating four hours/day)

13,000 hours

9years

RP130x

NO.EA-173-131031

• Package Dimensions (DFN(PLP)1010-4)

0.48

±0.05

0.65

1.00

※

0.05

45°

INDEX

0.48

3-C0.18

±0.05

0.25±0.05

0.05 M S AB

Bottom View

(Unit : mm)

0.05 S

※) Tab is GND level. (They are connected to the

reverse side of this IC.)

The tab is better to be connected to the GND,

but leaving it open is also acceptable.

• Mark Specifications (DFN(PLP)1010-4)

cd: Product Code

ef: Lot Number

…

Please refer to RP130K Series Mark Specification Table

… Alphanumeric Serial Number

①②

③④

RP130x

NO.EA-173-131031

• RP130K Series Mark Specification Table (DFN(PLP)1010-4)

RP130Kxx1A

Part Number

RP130K121A

RP130K131A

RP130K141A

RP130K151A

RP130K161A

RP130K171A

RP130K181A

RP130K191A

RP130K201A

RP130K211A

RP130K221A

RP130K231A

RP130K241A

RP130K251A

RP130K261A

RP130K271A

RP130K281A

RP130K291A

RP130K301A

RP130K311A

RP130K321A

RP130K331A

RP130K341A

RP130K351A

RP130K361A

RP130K371A

RP130K381A

RP130K391A

RP130K401A

RP130K411A

RP130K421A

RP130K431A

RP130K441A

RP130K451A

RP130K461A

RP130K471A

RP130K481A

RP130K491A

RP130K501A

RP131K511A

RP131K521A

RP131K531A

RP131K121A5

RP130K181A5

RP130K281A5

RP130Kxx1B

Part Number

RP130K121B

RP130K131B

RP130K141B

RP130K151B

RP130K161B

RP130K171B

RP130K181B

RP130K191B

RP130K201B

RP130K211B

RP130K221B

RP130K231B

RP130K241B

RP130K251B

RP130K261B

RP130K271B

RP130K281B

RP130K291B

RP130K301B

RP130K311B

RP130K321B

RP130K331B

RP130K341B

RP130K351B

RP130K361B

RP130K371B

RP130K381B

RP130K391B

RP130K401B

RP130K411B

RP130K421B

RP130K431B

RP130K441B

RP130K451B

RP130K461B

RP130K471B

RP130K481B

RP130K491B

RP130K501B

RP131K511B

RP131K521B

RP131K531B

RP131K121B5

RP130K181B5

RP130K281B5

RP130Kxx1D

Part Number

RP130K121D

RP130K131D

RP130K141D

RP130K151D

RP130K161D

RP130K171D

RP130K181D

RP130K191D

RP130K201D

RP130K211D

RP130K221D

RP130K231D

RP130K241D

RP130K251D

RP130K261D

RP130K271D

RP130K281D

RP130K291D

RP130K301D

RP130K311D

RP130K321D

RP130K331D

RP130K341D

RP130K351D

RP130K361D

RP130K371D

RP130K381D

RP130K391D

RP130K401D

RP130K411D

RP130K421D

RP130K431D

RP130K441D

RP130K451D

RP130K461D

RP130K471D

RP130K481D

RP130K491D

RP130K501D

RP131K511D

RP131K521D

RP131K531D

RP131K121D5

RP130K181D5

RP130K281D5

V^SET

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

VSET

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

VSET

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

RP130x

NO.EA-173-131031

• Power Dissipation (SC-82AB)

Power Dissipation (P_D) depends on conditions of mounting on board. This specification is based on the

measurement at the condition below:

Measurement Conditions

Standard Land Pattern

Environment

Board Material

Board Dimensions

Copper Ratio

Mounting on Board (Wind velocity=0m/s)

Glass cloth epoxy plastic (Double Layers)

40mm x 40mm x 1.6mm

Top side: Approx. 50%, Back side: Approx. 50%

φ0.5mm x 44pcs

Through-hole

Measurement Result

(Ta=25ºC)

Standard Land Pattern

380mW (Tjmax=125°C)

Free Air

Power Dissipation

150mW (Tjmax=125°C)

667°C/W

475mW (Tjmax=150°C)

θja=(125-25°C)/0.38W=263°C/W

Thermal Resistance

600

On Board

Free Air

475

500

400

380

300

200

150

100

Measurement Board Pattern

100

125

150

Ambient Temperature (ºC)

IC Mount Area (Unit : mm)

Power Dissipation

The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C.

Operating the IC in the shaded area in the graph might have an influence it's lifetime.

Operating time must be within the time limit described in the table below, in case of operating in the shaded area.

Estimated years

Operating Time

(Operating four hours/day)

13,000 hours

9years

RP130x

NO.EA-173-131031

• Package Dimensions (SC-82AB)

+0.05

1.0

0.2

2±0.2

1.3±0.2

0.9±0.1

(0.7)

0.3±0.1

0 to 0.1

+0.1

0.4±0.1

0.05

0.3±0.1

0.16

0.06

Unit : mm

• Mark Specifications (SC-82AB)

cd:

ef:

Product Code

Lot Number

…

Please refer to RP130Q Series Mark Specification Table

… Alphanumeric Serial Number

RP130x

NO.EA-173-131031

• RP130Q Series Mark Specification Table (SC-82AB)

RP130Qxx1A

Part Number

RP130Q121A

RP130Q131A

RP130Q141A

RP130Q151A

RP130Q161A

RP130Q171A

RP130Q181A

RP130Q191A

RP130Q201A

RP130Q211A

RP130Q221A

RP130Q231A

RP130Q241A

RP130Q251A

RP130Q261A

RP130Q271A

RP130Q281A

RP130Q291A

RP130Q301A

RP130Q311A

RP130Q321A

RP130Q331A

RP130Q341A

RP130Q351A

RP130Q361A

RP130Q371A

RP130Q381A

RP130Q391A

RP130Q401A

RP130Q411A

RP130Q421A

RP130Q431A

RP130Q441A

RP130Q451A

RP130Q461A

RP130Q471A

RP130Q481A

RP130Q491A

RP130Q501A

RP130Q511A

RP130Q521A

RP130Q531A

RP130Q121A5

RP130Q181A5

RP130Q281A5

RP130Qxx1B

Part Number

RP130Q121B

RP130Q131B

RP130Q141B

RP130Q151B

RP130Q161B

RP130Q171B

RP130Q181B

RP130Q191B

RP130Q201B

RP130Q211B

RP130Q221B

RP130Q231B

RP130Q241B

RP130Q251B

RP130Q261B

RP130Q271B

RP130Q281B

RP130Q291B

RP130Q301B

RP130Q311B

RP130Q321B

RP130Q331B

RP130Q341B

RP130Q351B

RP130Q361B

RP130Q371B

RP130Q381B

RP130Q391B

RP130Q401B

RP130Q411B

RP130Q421B

RP130Q431B

RP130Q441B

RP130Q451B

RP130Q461B

RP130Q471B

RP130Q481B

RP130Q491B

RP130Q501B

RP130Q511B

RP130Q521B

RP130Q531B

RP130Q121B5

RP130Q181B5

RP130Q281B5

RP130Qxx1D

Part Number

RP130Q121D

RP130Q131D

RP130Q141D

RP130Q151D

RP130Q161D

RP130Q171D

RP130Q181D

RP130Q191D

RP130Q201D

RP130Q211D

RP130Q221D

RP130Q231D

RP130Q241D

RP130Q251D

RP130Q261D

RP130Q271D

RP130Q281D

RP130Q291D

RP130Q301D

RP130Q311D

RP130Q321D

RP130Q331D

RP130Q341D

RP130Q351D

RP130Q361D

RP130Q371D

RP130Q381D

RP130Q391D

RP130Q401D

RP130Q411D

RP130Q421D

RP130Q431D

RP130Q441D

RP130Q451D

RP130Q461D

RP130Q471D

RP130Q481D

RP130Q491D

RP130Q501D

RP130Q511D

RP130Q521D

RP130Q531D

RP130Q121D5

RP130Q181D5

RP130Q281D5

SET

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

RP130x

NO.EA-173-131031

• Power Dissipation (SOT-23-5)

Power Dissipation (P_D) depends on conditions of mounting on board. This specification is based on the

measurement at the condition below:

(Power Dissipation (SOT-23-5) is substitution of SOT-23-6.)

Measurement Conditions

Standard Test Land Pattern

Environment

Board Material

Board Dimensions

Copper Ratio

Mounting on Board (Wind velocity=0m/s)

Glass cloth epoxy plastic (Double sided)

40mm x 40mm x 1.6mm

Top side: Approx. 50%, Back side: Approx. 50%

φ 0.5mm x 44pcs

Through-holes

Measurement Result

(Ta=25°C, Tjmax=125°C)

Standard Land Pattern

Free Air

250mW

400°C/W

420mW(Tjmax=125°C)

525mW(Tjmax=150°C)

θja = (125-25°C)/0.42W= 238°C/W

Power Dissipation

Thermal Resistance

600

525

On Board

500

400

420

Free Air

250

300

200

100

125

150

Ambience Temperature (°C)

Power Dissipation

Measurement Board Pattern

IC Mount Area (Unit: mm)

The above graph shows the Power Dissipation of the package based on Tjmax=125°C and Tjmax=150°C.

Operating the IC in the shaded area in the graph might have an influence it's lifetime.

Operating time must be within the time limit described in the table below, in case of operating in the shaded area.

Estimated years

Operating Time

(Operating four hours/day)

9,000 hours

6years

RP130x

NO.EA-173-131031

• Package Dimensions (SOT-23-5)

2.9±0.2

1.9±0.2

1.1±0.1

0.8±0.1

(0.95) (0.95)

0～0.1

+0.1

0.15-0.05

0.4±0.1

Unit : mm

• Mark Specifications (SOT-23-5)

cde: Product Code

fg: Lot Number

…

Please refer to RP130N Series Mark Specification Table

… Alphanumeric Serial Number

cdefg

RP130x

NO.EA-173-131031

• RP130N Series Mark Specification Table (SOT-23-5)

RP130Nxx1A

Part Number

RP130N121A

RP130N131A

RP130N141A

RP130N151A

RP130N161A

RP130N171A

RP130N181A

RP130N191A

RP130N201A

RP130N211A

RP130N221A

RP130N231A

RP130N241A

RP130N251A

RP130N261A

RP130N271A

RP130N281A

RP130N291A

RP130N301A

RP130N311A

RP130N321A

RP130N331A

RP130N341A

RP130N351A

RP130N361A

RP130N371A

RP130N381A

RP130N391A

RP130N401A

RP130N411A

RP130N421A

RP130N431A

RP130N441A

RP130N451A

RP130N461A

RP130N471A

RP130N481A

RP130N491A

RP130N501A

RP130N511A

RP130N521A

RP130N531A

RP130N121A5

RP130N181A5

RP130N281A5

RP130Nxx1B

Part Number

RP130N121B

RP130N131B

RP130N141B

RP130N151B

RP130N161B

RP130N171B

RP130N181B

RP130N191B

RP130N201B

RP130N211B

RP130N221B

RP130N231B

RP130N241B

RP130N251B

RP130N261B

RP130N271B

RP130N281B

RP130N291B

RP130N301B

RP130N311B

RP130N321B

RP130N331B

RP130N341B

RP130N351B

RP130N361B

RP130N371B

RP130N381B

RP130N391B

RP130N401B

RP130N411B

RP130N421B

RP130N431B

RP130N441B

RP130N451B

RP130N461B

RP130N471B

RP130N481B

RP130N491B

RP130N501B

RP130N511B

RP130N521B

RP130N531B

RP130N121B5

RP130N181B5

RP130N281B5

RP130Nxx1D

Part Number

RP130N121D

RP130N131D

RP130N141D

RP130N151D

RP130N161D

RP130N171D

RP130N181D

RP130N191D

RP130N201D

RP130N211D

RP130N221D

RP130N231D

RP130N241D

RP130N251D

RP130N261D

RP130N271D

RP130N281D

RP130N291D

RP130N301D

RP130N311D

RP130N321D

RP130N331D

RP130N341D

RP130N351D

RP130N361D

RP130N371D

RP130N381D

RP130N391D

RP130N401D

RP130N411D

RP130N421D

RP130N431D

RP130N441D

RP130N451D

RP130N461D

RP130N471D

RP130N481D

RP130N491D

RP130N501D

RP130N511D

RP130N521D

RP130N531D

RP130N121D5

RP130N181D5

RP130N281D5

cde

H0A

H0B

H0C

H0D

H0E

H0F

H0G

H0J

H0K

H0L

H0M

H0N

H0P

H0Q

H0R

H0S

H0T

H0V

H0W

H0X

H0Y

H0Z

J0A

J0B

J0C

J0D

J0E

J0F

cde

H1A

H1B

H1C

H1D

H1E

H1F

H1G

H1J

H1K

H1L

H1M

H1N

H1P

H1Q

H1R

H1S

H1T

H1V

H1W

H1X

H1Y

H1Z

J1A

J1B

J1C

J1D

J1E

J1F

cde

H2A

H2B

H2C

H2D

H2E

H2F

H2G

H2J

H2K

H2L

H2M

H2N

H2P

H2Q

H2R

H2S

H2T

H2V

H2W

H2X

H2Y

H2Z

J2A

J2B

J2C

J2D

J2E

J2F

SET

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

1.2V

1.3V

1.4V

1.5V

1.6V

1.7V

1.8V

1.9V

2.0V

2.1V

2.2V

2.3V

2.4V

2.5V

2.6V

2.7V

2.8V

2.9V

3.0V

3.1V

3.2V

3.3V

3.4V

3.5V

3.6V

3.7V

3.8V

3.9V

4.0V

4.1V

4.2V

4.3V

4.4V

4.5V

4.6V

4.7V

4.8V

4.9V

5.0V

5.1V

5.2V

5.3V

1.25V

1.85V

2.85V

J0G

J0H

J0J

J1G

J1H

J1J

J2G

J2H

J2J

J0K

J0L

J1K

J1L

J2K

J2L

J0M

J0N

J0P

J0Q

J0R

J0S

J0V

J0W

J0X

J0U

H0H

H0U

J1M

J1N

J1P

J1Q

J1R

J1S

J1V

J1W

J1X

J1U

H1H

H1U

J2M

J2N

J2P

J2Q

J2R

J2S

J2V

J2W

J2X

J2U

H2H

H2U

RP130x

NO.EA-173-131031

TEST CIRCUITS

OUT

RP130x

Series

IOUT

VOUT

GND

C1=Ceramic 0.47μF

C2=Ceramic 0.47μF

Basic Test Circuit

OUT

VDD

OUT

RP130x

Series

ISS

CE GND

C1=Ceramic 0.47μF

C2=Ceramic 0.47μF

Supply Current Test Circuit

Pulse

Generator

OUT

RP130x

Series

IOUT

P.G.

CE GND

C2=Ceramic 0.47μF

Ripple Rejection Test Circuit

OUT

RP130x

Series

GND

IOUTa

IOUTb

C1=Ceramic 0.47μF

C2=Ceramic 0.47μF

Load Transient Response Test Circuit

RP130x

NO.EA-173-131031

TYPICAL CHARACTERISTICS

1) Output Voltage vs. Output Current (C1=0.47μF, C2=0.47μF, Topt=25°C)

RP130x121x

RP130x281x

1.4

1.2

1.0

0.8

0.6

0.4

0.2

3.0

2.5

2.0

1.5

1.0

0.5

IN=3.8V

IN=4.2V

IN=6.0V

IN=6.5V

VIN=2.2V

V^IN=3.6V

VIN=4.2V

VIN=6.0V

VIN=6.5V

100

200

300

400

500

100

200

300

400

500

Output Current I^OUT(mA)

RP130x501x

VIN=6.0V

VIN=6.5V

100

200

300

400

500

Output Current I^OUT(mA)

2) Output Voltage vs. Input Voltage (C1=0.47μF, C2=0.47μF, Topt=25°C)

RP130x121x RP130x281x

1.4

1.2

1.0

0.8

0.6

0.4

0.2

3.0

2.5

2.0

1.5

1.0

0.5

IOUT=1mA

IOUT=30mA

IOUT=50mA

I^OUT=30mA

I^OUT=50mA

Input Voltage V^IN(V)

RP130x

NO.EA-173-131031

RP130x501x

OUT=1mA

OUT=30mA

OUT=50mA

Input Voltage V^IN(V)

3) Supply Current vs. Input Voltage (C1=0.47μF, C2=0.47μF, Topt=25°C)

RP130x121x RP130x281x

Input Voltage V^IN(V)

RP130x501x

Input Voltage V^IN(V)

RP130x

NO.EA-173-131031

4) Output Voltage vs. Temperature (IOUT=1mA, C1=0.47μF, C2=0.47μF)

RP130x121x

RP130x281x

IN=2.2V

VIN=3.8V

1.25

1.24

1.23

1.22

1.21

1.20

1.19

1.18

1.17

1.16

1.15

2.85

2.84

2.83

2.82

2.81

2.80

2.79

2.78

2.77

2.76

2.75

-40 -25

75 85

-40 -25

75 85

Temperature Topt (°C)

RP130x501x

IN=6.0V

5.05

5.04

5.03

5.02

5.01

5.00

4.99

4.98

4.97

4.96

4.95

-40 -25

75 85

Temperature Topt (°C)

5) Supply Current vs. Temperature (IOUT=0mA, C1=0.47μF, C2=0.47μF)

RP130x121x RP130x281x

IN=2.2V

VIN=3.8V

-40 -25

75 85

-40 -25

75 85

Temperature Topt (°C)

RP130x

NO.EA-173-131031

RP130x501x

IN=6.0V

-40 -25

75 85

Temperature Topt (°C)

6) Dropout Voltage vs. Output Current (C1=0.47μF, C2=0.47μF)

RP130x121x

RP130x281x

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

85°C

25°C

-40°C

85°C

25°C

-40°C

100 125 150

Output Current I^OUT(mA)

RP130x501x

0.30

0.25

0.20

0.15

0.10

0.05

85°C

25°C

-40°C

100 125 150

Output Current I^OUT(mA)

RP130x

NO.EA-173-131031

7) Dropout Voltage vs. Set Output Voltage (C1=0.47μF, C2=0.47μF)

0.7

IOUT=150mA

IOUT=50mA

IOUT=30mA

IOUT=10mA

0.6

0.5

0.4

0.3

0.2

0.1

Set Output Voltage V^REG(V)

8) Ripple Rejection vs. Input Bias Voltage (C1=none, C2=0.47μF, Ripple=0.2Vp-p, Topt=25°C)

RP130x281x RP130x281x

IOUT=1mA

IOUT=30mA

100

f=100Hz

f=1kHz

f=10kHz

f=100kHz

f=100Hz

f=1kHz

f=10kHz

f=100kHz

2.8 3.3 3.8 4.3 4.8 5.3 5.8 6.3

Input Voltage V^IN(V)

9) Ripple Rejection vs. Frequency (C1=none, C2=0.47μF, Ripple=0.2Vp-p, Topt=25°C)

RP130x121x

RP130x281x

IN=2.2V

VIN=3.8V

100

OUT=1mA

OUT=30mA

OUT=150mA

OUT=30mA

OUT=150mA

0.1

100

1000

0.1

100

1000

Frequency f (kHz)

RP130x

NO.EA-173-131031

RP130x501x

IN=6.0V

100

OUT=1mA

OUT=30mA

OUT=150mA

0.1

100

1000

Frequency f (kHz)

10) Input Transient Response (IOUT=30mA, tr=tf=5μs, C1=none, C2=0.47μF, Topt=25°C)

RP130x121x

RP130x281x

Input Voltage

1.205

1.200

1.195

1.190

2.805

2.800

2.795

2.790

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

RP130x501x

Input Voltage

5.005

5.000

4.995

4.990

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

RP130x

NO.EA-173-131031

11) Load Transient Response (tr

0.5μ

s, C1=0.47μ

F, C2

0.47

μF, IOUT

50mAQ

100mA, Topt

25°

RP130x121x

RP130x281x

150

100

150

100

Output Current

50mA 100mA

50mA

100mA

1.22

1.21

1.20

1.19

1.18

2.82

2.81

2.80

2.79

2.78

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

RP130x501x

150

100

Output Current

50mA 100mA

5.01

5.00

4.99

4.98

4.97

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

12) Load Transient Response (tr

0.5μ

s, C1=0.47μ

F, C2

0.47

μF, IOUT

1mAQ150mA, Topt=25°C)

RP130x121x

RP130x281x

200

100

200

100

Output Current

1mA 150mA

Output Current

1mA

150mA

2.90

2.85

2.80

2.75

2.70

2.65

1.30

1.25

1.20

1.15

1.10

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

RP130x

NO.EA-173-131031

RP130x501x

200

100

Output Current

1mA 150mA

5.05

5.00

4.95

4.90

4.85

Output Voltage

10 20 30 40 50 60 70 80 90 100

Time t (μs)

13) Turn On Speed with CE pin (C1=0.47μF, C2=0.47μF, Topt=25°C)

RP130x121x

IOUT=1mA

OUT=30mA

CE Input Voltage

Output Voltage

CE Input Voltage

Output Voltage

1.5

1.0

0.5

1.5

1.0

0.5

12 16 20 24 28 32 36

Time t (μs)

RP130x121x

RP130x281x

IOUT=150mA

IOUT=1mA

CE Input Voltage

Output Voltage

CE Input Voltage

1.5

1.0

0.5

Output Voltage

12 16 20 24 28 32 36

Time t (μs)

RP130x

NO.EA-173-131031

RP130x281x

IOUT=30mA

IOUT=150mA

CE Input Voltage

Output Voltage

CE Input Voltage

Output Voltage

12 16 20 24 28 32 36

Time t (μs)

RP130x501x

IOUT=1mA

IOUT=30mA

CE Input Voltage

Output Voltage

10 20 30 40 50 60 70 80 90

Time t (μs)

RP130x501x

IOUT=150mA

CE Input Voltage

Output Voltage

10 20 30 40 50 60 70 80 90

Time t (μs)

RP130x

NO.EA-173-131031

14) Turn Off Speed with CE pin (D Version) (C1=0.47μF, C2=0.47μF, Topt=25°C)

RP130x121D

IOUT=1mA

OUT=30mA

CE Input Voltage

1.5

1.0

0.5

1.5

1.0

0.5

Output Voltage

20 40 60 80 100 120 140 160 180

Time t (μs)

RP130x121D

RP130x281D

OUT=150mA

IOUT=1mA

CE Input Voltage

Output Voltage

1.5

1.0

0.5

Output Voltage

20 40 60 80 100 120 140 160 180

10 20 30 40 50 60 70 80 90

Time t (μs)

RP130x281D

IOUT=30mA

IOUT=150mA

CE Input Voltage

Output Voltage

10 20 30 40 50 60 70 80 90

Time t (μs)

RP130x

NO.EA-173-131031

RP130x501D

IOUT=1mA

IOUT=30mA

CE Input Voltage

Output Voltage

10 20 30 40 50 60 70 80 90

Time t (μs)

RP130x501D

IOUT=150mA

CE Input Voltage

Output Voltage

10 20 30 40 50 60 70 80 90

Time t (μs)

15) Minimum Operating Voltage (C1=0.47μF, C2=0.47μF)

2.2

2.0

1.8

1.6

1.4

Hatched area is available

for 1.2V output.

1.2

1.0

0.8

0.6

0.4

0.2

100 125 150

Output Current I^OUT(mA)

RP130x

NO.EA-173-131031

ESR vs. Output Current

When using these ICs, consider the following points:

The relations between I^OUT(Output Current) and ESR of an output capacitor are shown below.

The conditions when the white noise level is under 40μV (Avg.) are marked as the hatched area in the graph.

Measurement conditions

Frequency Band : 10Hz to 3MHz

Temperature

C1, C2

: −40°C to 85°C

: 0.47μF

RP130x121x

RP130x281x

IN=1.4V to 6.5V

IN=3.0V to 6.5V

100

Topt=85°C

Topt= 40°C

0.1

0.01

100 125 150

Output Current I^OUT(mA)

RP130x501x

IN=5.2V to 6.5V

100

Topt=85°C

Topt= 40°C

0.1

0.01

100 125 150

Output Current I^OUT(mA)

1.The products and the product speciﬁcations described in this document are subject to change or

discontinuation of production without notice for reasons such as improvement. Therefore, before

deciding to use the products, please refer to Ricoh sales representatives for the latest information

thereon.

2.The materials in this document may not be copied or otherwise reproduced in whole or in part without

prior written consent of Ricoh.

3.Please be sure to take any necessary formalities under relevant laws or regulations before exporting or

otherwise taking out of your country the products or the technical information described herein.

4.The technical information described in this document shows typical characteristics of and example

application circuits for the products. The release of such information is not to be construed as a

warranty of or a grant of license under Ricoh's or any third party's intellectual property rights or any

other rights.

5.The products listed in this document are intended and designed for use as general electronic

components in standard applications (oﬃce equipment, telecommunication equipment, measuring

instruments, consumer electronic products, amusement equipment etc.). Those customers intending to

use a product in an application requiring extreme quality and reliability, for example, in a highly speciﬁc

application where the failure or misoperation of the product could result in human injury or death

(aircraft, spacevehicle, nuclear reactor control system, traﬃc control system, automotive and

transportation equipment, combustion equipment, safety devices, life support system etc.) should ﬁrst

6.We are making our continuous eﬀort to improve the quality and reliability of our products, but

semiconductor products are likely to fail with certain probability. In order to prevent any injury to

persons or damages to property resulting from such failure, customers should be careful enough to

incorporate safety measures in their design, such as redundancy feature, ﬁre containment feature and

fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from

misuse or inappropriate use of the products.

7.Anti-radiation design is not implemented in the products described in this document.

8.Please contact Ricoh sales representatives should you have any questions or comments concerning

the products or the technical information.

Ricoh is committed to reducing the environmental loading materials in electrical devices

with a view to contributing to the protection of human health and the environment.

Ricoh has been providing RoHS compliant products since April 1, 2006 and Halogen-free products since

Halogen Free

April 1, 2012.

http://www.e-devices.ricoh.co.jp/en/

Sales & Support Oﬃces

RICOH ELECTRONIC DEVICES CO., LTD.

Higashi-Shinagawa Oﬃce (International Sales)

3-32-3, Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-8655, Japan

Phone: +81-3-5479-2857 Fax: +81-3-5479-0502

RICOH EUROPE (NETHERLANDS) B.V.

Semiconductor Support Centre

Prof. W.H. Keesomlaan 1, 1183 DJ Amstelveen, The Netherlands

Phone: +31-20-5474-309

RICOH ELECTRONIC DEVICES KOREA CO., LTD.

3F, Haesung Bldg, 504, Teheran-ro, Gangnam-gu, Seoul, 135-725, Korea

Phone: +82-2-2135-5700 Fax: +82-2-2051-5713

RICOH ELECTRONIC DEVICES SHANGHAI CO., LTD.

Room 403, No.2 Building, No.690 Bibo Road, Pu Dong New District, Shanghai 201203,

People's Republic of China

Phone: +86-21-5027-3200 Fax: +86-21-5027-3299

RICOH ELECTRONIC DEVICES CO., LTD.

Taipei oﬃce

Room 109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.)

Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623

RP130K201A [RICOH]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E