BD5427EFS [ROHM]
7W+7W Class-D Speaker Amplifier for Analog Input; 7W + 7W D类扬声器放大器的模拟输入型号: | BD5427EFS |
厂家: | ROHM |
描述: | 7W+7W Class-D Speaker Amplifier for Analog Input |
文件: | 总16页 (文件大小:428K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Performance Class-D Speaker Amplifier Series
7W+7W Class-D
Speaker Amplifier for Analog Input
BD5427EFS
No.09075EAT06
●Overview
BD5427EFS is a 7W + 7W stereo class-D power amplifier IC, developed for space-saving and low heat-generation
applications such as low-profile TV sets. The IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) process
technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up to
an ultimate level. With this technology, the IC has achieved high efficiency of 80% (7W + 7W output with 8Ω load).
The IC,in addition, employs a compact back-surface heat radiation type power package to achieve low power consumption
and low heat generation and eliminates necessity of installing an external radiator, up to a total output of 14W. This product
satisfies both needs for drastic downsizing, low-profile structures and powerful, high-quality playback of the sound system.
●Features
1) A high efficiency of 80% (7W + 7W output with 8Ω load), which is the highest grade in the industry and low heat-
generation.
2) Driving a lowest rating load of 6Ω is allowed.
3) Pop noise upon turning power on/off and power interruption has been reduced.
4) High-quality audio muting is implemented by soft-switching technology.
5) High-reliability design provided with built-in protection circuits against high temperatures, against VCC shorting and GND
shorting, against reduced-voltage, and against applying DC voltage to speaker.
6) A master/slave function allowing synchronization of multiple devices reduces beat noises.
7) Adjustment of internal PWM sampling clock frequencies (250kHz to 400kHz) allows easy protective measures against
unwanted radio emission to AM radio band.
8) A compact back-surface heat radiation type power package is employed.
HTSSOP-A44(5mm × 7.5mm × 1.0mm, pitch 0.8mm
www.rohm.com
2009.06 - Rev.A
1/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Absolute Maximum Ratings
A circuit must be designed and evaluated not to exceed absolute maximum rating in any cases and even momentarily, to prevent
reduction in functional performances and thermal destruction of a semiconductor product and secure useful life and reliability.
The following values assume Ta =25℃. For latest values, refer to delivery specifications.
Item
Supply voltage
Symbol
VCC
Rating
+20
Unit
V
Conditions
Pin 7, 8, 15, 16, 29, 30, 37, 38, 40 (Note 1, 2)
(Note 3)
2.0
W
W
V
Power dissipation
Pd
4.5
(Note 4)
Input voltage for signal pin
Input voltage for control pin
Input voltage for clock pin
Operating temperature range
Storage temperature range
Maximum junction temperature
VIN
VCONT
VOSC
Topr
-0.2 to +7.2
-0.2 to Vcc+0.2
-0.2 to +7.2
-40 to +85
-55 to +150
+150
Pin 1, 44 (Note 1)
V
Pin 20, 24 (Note 1)
Pin 23 (Note 1)
V
℃
℃
℃
Tstg
Tjmax
(Note 1) A voltage that can be applied with reference to GND (pins 11, 12, 33, 34, and 43)
(Note 2) Pd and Tjmax=150℃must not be exceeded.
(Note 3) 70mm × 70mm × 1.6mm FR4 One-sided glass epoxy board (Back copper foil 0%) installed.
If used under Ta=25℃or higher, reduce 16mW for increase of every 1℃. The board is provided with thermal via.
(Note 4) 70mm × 70mm × 1.6mm FR4 Both-sided glass epoxy board (Back copper foil 100%) installed.
If used under Ta=25℃or higher, reduce 36mW for increase of every 1℃. The board is provided with thermal via.
●Operating Conditions
The following values assume Ta =25℃. Check for latest values in delivery specifications.
Item
Supply voltage
Symbol
VCC
Rating
+10 to +16.5
6 to 16
Unit
V
Conditions
Pin 7, 8, 15, 16, 29, 30, 37, 38, 40
(Note 5)
Load resistance
RL
Ω
(Note 5) Pd should not be exceeded.
●Electrical Characteristics
Except otherwise specified Ta = 25℃, VCC = 12V, fIN = 1kHz, Rg = 0Ω, RL = 8Ω,MUTEX="H", MS="L"
For latest values, refer to delivery specifications.
Representative
Item
Symbol
Unit
Conditions
value
Whole circuit
Circuit current 1 (Sampling mode)
Circuit current 2 (Muting mode)
Control circuit
ICC1
ICC2
25
10
mA
mA
With no signal
MUTEX = “L”
“H” level input voltage
VIH
VIL
2.3 to 12
0 to 0.8
V
V
MUTEX, MS
MUTEX, MS
“L” level input voltage
Audio circuit
Voltage gain
GV
PO
28
7
dB
W
PO = 1W
Maximum output power 1 (Note 6)
Total harmonic distortion (Note 6)
Crosstalk
THD+N = 10%
THD
CT
0.1
85
80
1
%
PO = 1W, BW=20Hz to 20kHz
dB
PO = 1W, Rg = 0Ω, BW = IHF-A
Output noise voltage (Sampling mode)
Residual noise voltage (Muting mode)
Internal sampling clock frequency
VNO
µVrms Rg = 0Ω, BW = IHF-A
VNOM
FOSC
µVrms Rg = 0Ω, BW = IHF-A, MUTEX = “L”
250
kHz
MS = “L” (In master operation)
(Note 6) The rated values of items above indicate average performances of the device, which largely depend on circuit layouts, components, and power supplies.
The reference values are those applicable to the device and components directly installed on a board specified by us.
www.rohm.com
2009.06 - Rev.A
2/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Electrical characteristic curves (Reference data)
(1) Under Stereo Operation(RL=8Ω)
.
100
100
10
Vcc=12V
Vcc=12V
RL=8Ω
RL=8Ω
10
1
BW=20~20kHz
Po=1W
BW=20~20kHz
6kHz
1
0.1
0.01
1kHz
0.1
0.1
0.01
100Hz
10
10
100
1000
10000
100000
0.001
0.01
1
100
FREQUENCY (Hz)
OUTPUT POWER (W)
Fig. 1 THD+N - Output power
Fig. 2 THD+N - Frequency
0
-20
40
Vcc=12V
RL=8Ω
Po=1W
35
30
25
20
15
10
5
-40
BW=20~20kHz
Vcc=12V
L
R =8Ω
-60
-80
Po=1W
L=33μH
C=0.47μF
Cg=0.1μF
0
-100
10
100
1000
10000
100000
10
100
1000
FREQUENCY(Hz)
10000
100000
FREQUENCY (Hz)
Fig. 3 Voltage gain - Frequency
Fig. 4 Crosstalk - Frequency
20
15
10
5
0
L
R =8Ω
fin=1kHz
THD=10%
Vcc=12V
L
R =8Ω
fin=1kHz
BW=20~20kHz
-20
-40
-60
-80
-100
0
8
0.001
0.01
0.1
1
10
100
10
12
14
16
18
OUTPUT POWER (W)
VCC (V)
Fig. 5 Crosstalk - Output power
Fig. 6 Output power - Power supply voltage
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
3/15
Technical Note
BD5427EFS
●Electrical characteristic curves (Reference data) – Continued
.
100
90
80
70
60
50
40
100
90
80
70
60
50
40
30
20
10
0
30
20
10
0
Vcc=10V
L
Vcc=12V
L
R =8Ω
fin=1kHz
R =8Ω
fin=1kHz
0
5
10
15
20
0
5
10
15
20
OUTPUT POWER (W/ch)
OUTPUT POWER (W/ch)
Fig. 7 Efficiency - Output power
Fig. 8 Efficiency - Output power
100
3
2
1
0
90
80
70
60
50
40
30
20
10
0
Vcc=16.5V
Vcc=12V
Vcc=10V
Vcc=16.5V
RL=8Ω
fin=1kHz
L
R =8Ω
fin=1kHz
0
5
10
15
20
25
30
35
40
0
5
10
15
TOTAL OUTPUT POWER (W)
OUTPUT POWER (W/ch)
Fig. 9 Efficiency - Output power
Fig. 10 Current consumption - Output power
100
90
80
70
60
50
40
30
20
10
0
0
RL=8Ω
無信号時
Vcc=12V
-20
L
R =8Ω
Without signal
-40
-60
Without signal
BW=20~20kHz
-80
Sampling
Mute
-100
-120
-140
10
100
1000
10000
100000
8
10
12
14
16
18
FREQUENCY (Hz)
VCC (V)
Fig. 11 Current consumption - Power supply voltage
Fig. 12 FFT of Output Noise Voltage
www.rohm.com
2009.06 - Rev.A
4/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Electrical characteristic curves (Reference data) – Continued
.
M U T E X
Pin 20
M U T E X
Pin 20
V cc = 1 2 V
1 0 V/div
V cc = 1 2 V
L = 8
1 0 V/div
5 V/div
R
L = 8
Ω
R
Ω
P o = 5 0 0 m W
fin = 5 0 0 H z
P o = 5 0 0 m W
fin = 5 0 0 H z
T M
Pin 2 6
T M
Pin 26
5 V/div
2 V/div
2 V/div
Speaker
output
Speaker
output
1 0 m se c/div
1 0 m sec/div
Fig. 13 Wave form when Releasing Soft-mute
Fig. 14 Wave form when Activating Soft-mute
VCCA
VCCA
VHOLD
Pin 27
VHOLD
Pin 27
5V/div
5V/div
5V/div
5V/div
Vcc=12V
RL =8 Ω
Vcc=12V
RL =8 Ω
Po=500mW
fin=3kHz
Po=500mW
fin=3kHz
TM
Pin 26
TM
Pin 26
2V/div
2V/div
Speaker
output
Speaker
output
20msec/div
2msec/div
Fig. 15 Wave form on Instantaneous Power Interruption
(20msec / div)
Fig. 16 Wave form on Instantaneous Power Interruption
(2msec / div)
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
5/15
Technical Note
BD5427EFS
●Electrical characteristic curves (Reference data)
(2) Under Stereo Operation(RL=6Ω)
.
25
RL=6Ω
fin=1kHz
THD=10%
20
15
10
5
0
8
10
12
14
16
18
VCC (V)
Fig. 17 Output power - Power supply voltage
100
100
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
0
Vcc=10V
RL=6Ω
fin=1kHz
Vcc=12V
RL=6Ω
fin=1kHz
0
5
10
15
20
0
5
10
15
20
OUTPUT POWER (W/ch)
OUTPUT POWER (W/ch)
Fig. 18 Efficiency - Output power
Fig. 19 Efficiency - Output power
100
90
80
70
60
50
40
30
20
10
0
4
3
2
1
Vcc=16.5V
Vcc=12V
Vcc=10V
Vcc=16.5V
RL=6Ω
fin=1kHz
L
R =6Ω
fin=1kHz
0
0
0
5
10
15
20
5
10
TOTAL OUTPUT POWER (W)
Fig. 21 Current consumption - Output power
15
20
25 30
35 40
OUTPUT POWER (W/ch)
Fig. 20 Efficiency - Output power
Dotted lines of the graphs indicate continuous output power to be obtained on musical signal source or by installing
additional heat sinks.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
6/15
Technical Note
BD5427EFS
●Pin Assignment
Top View
DRIVER
2P
DRIVER
2N
DRIVER
1P
DRIVER
1N
Fig. 22 Pin Assignment Diagram
●Outer Dimensions and Inscriptions
Type
BD5427EFS
Lot No.
Fig. 23 Outer Dimensions and Inscriptions of HTSSOP-A44 Package
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
7/15
Technical Note
BD5427EFS
●Explanation of Pin Functions (Provided pin voltages are typical values.)
No.
Symbol
Pin voltage
Pin description
Internal equalizing circuit
40
ch1 Analog signal input pin
ch2 Analog signal input pin
20k
1
44
IN1
IN2
1/44
43
3.5V
Input audio signal via a capacitor.
ch1 positive bootstrap pin
Coccect a capacitor
6
BSP1P
VCCP1P
OUT1P
GNDP1
OUT1N
VCCP1N
BSP1N
-
7,8
6
ch1 positive power system power
supply pin
7, 8
Vcc
9,10
ch1 positive PWM signal output pin
Connect with output LPF.
9, 10
11, 12
13, 14
15, 16
17
Vcc to 0V
11,12
0V
ch1 power system GND pin
15,
16
17
ch1 negative PWM signal output pin
Connect with output LPF
Vcc to 0V
13,14
ch1 negative power system power
supply pin
Vcc
11,12
ch1 negative bootstrap pin
Connect a capacitor.
-
www.rohm.com
2009.06 - Rev.A
8/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Explanation of Pin Functions - continued
No.
Symbol
Pin voltage
Pin description
Internal equalizing circuit
40
Warning output pin
2k
Pin to notify operation warning.
H: Under warning
18
H: 5V
L: 0V
18
WARNING
L: Normal operation
Connect a resister.
43
40
Error output pin
2k
A pin for notifying operation errors.
H: Error
19
H: 5V
L: 0V
19
ERROR
L: Normal operation
Connect a resister.
43
40
120k
Audio mute control pin
20
20
MUTEX
-
H: Mute off
L: Mute on
43
2, 3
4, 5
21, 22
N.C. pin
N.C.
-
Nothing is connected with IC internal circuit.
40
Sampling clock signal input/output pin
23
OSC
-
23
43
When using two or more sampling clocks,
connect via a capacitor.
www.rohm.com
2009.06 - Rev.A
9/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Explanation of Pin Functions - continued
No.
Symbol
Pin voltage
Pin description
Internal equalizing circuit
40
Master/Slave switching pin
120k
24
43
Switching of master/slave functions on a
sampling clock signal.
H: Slave operation
24
MS
-
L: Master operation
40
Internal PWM sampling clock frequency
setting pin
25
26
27
ROSC
5.6V
25
43
Usually the pin is used open.
To adjust an internal sampling clock
frequency, connect a resister.
40
Audio muting constant setting pin
Connect a capacitor.
TM
0 to 5V
26
43
40
Instantaneous power interruption
detecting voltage setting pin
VHOLD
0.68×Vcc
27
43
Connect a capacitor.
To adjust a detecting voltage, connect a
resister.
www.rohm.com
2009.06 - Rev.A
10/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Explanation of Pin Functions - continued
No.
Symbol
Pin voltage
Pin description
Internal equalizing circuit
29,30
ch2 negative bootstrap pin
Connect a capacitor.
28
BSP2N
-
2 8
29, 30
31, 32
33, 34
35, 36
37, 38
VCCP2N
OUT2N
GNDP2
OUT2P
VCCP2P
Vcc
Vcc to 0V
0V
ch2 negative power system power supply pin
31,32
ch2 negative PWM signal output pin
Connect an output LPF.
ch2 power system GND pin
33,34
37,38
ch2 positive PWM signal output pin
Connect an output LPF.
Vcc to 0V
Vcc
3 9
ch2 positive power system power supply pin
35,36
ch2 positive bootstrap pin
Connect a capacitor.
39
40
BSP2P
VCCA
-
33,34
Vcc
Analog system power pin
40
PWM system bias pin
Connect a capacitor.
Vcc+35
12
41
FILP
41
43
40
Analog signal system bias pin
Connect a capacitor.
42
43
42
43
FILA
3.5V
GNDA
0V
Analog system power supply pin
www.rohm.com
2009.06 - Rev.A
11/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Application Circuit Diagram
・Vcc=10V to 16.5V
C32
C35
C31
GNDA
VCCA
C43
C38
C37
GNDD
C40
C39
C28
C41
C29
C42
DRIVER
DRIVER
2P
2N
DRIVER
1P
DRIVER
1N
C7
C8
C15
C6
C17
C9
C13
C10
Fig. 24 Circuit Diagram of Stereo Operation with 8Ω Load
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
12/15
Technical Note
BD5427EFS
Table 1 BOM List of Stereo Operation with 8Ω Load
Configuration
Rated
voltage
Temperature
characteristics
No.
Item
Part Number
Vendor
Value
-
Tolerance
Quantity
Reference
mm
inch
1
2
IC
C
C
C
C
C
C
C
C
C
C
R
BD5427EFS
ROHM HTSSOP-A44
-
-
-
±10%
±10%
±10%
±5%
1
4
5
4
2
2
1
2
1
1
3
2
IC1
GRM219B31E684KA88D MURATA 2012 0805 0.68µF
25V
50V
50V
25V
50V
25V
25V
16V
16V
25V
50V
±10%
±10%
±10%
±20%
±20%
±10%
±10%
±10%
±10%
±20%
±1%
C6, C17, C28, C39
C7, C15, C29, C37, C40
C9, C13, C31, C35
C1, C44
3
GRM188R11H104KA93 MURATA 1608 0603
GRM21BB11H104KA01 MURATA 2012 0805
0.1µF
0.1µF
2.2µF
4
5
25ST225M3216
50ST474M3225
Rubycon 3225 1210
6
Rubycon 3225 1210 0.47µF
±5%
C10, C32
7
GRM21BB31E335KA75 MURATA 2012 0805
3.3µF
0.1µF
1µF
±10%
±10%
±10%
±10%
±25%
±200ppm/℃
C27
8
GRM188B11E104KA
GRM21BB11C105KA
MURATA 1608 0603
MURATA 2012 0805
C23, C26
9
C41
10
11
12
GRM21BB31C106KE15 MURATA 2012 0805
10µF
10µF
C42
25SVPD10M
SANYO 6666 2626
C8, C38, C43
R18, R19
MCR01MZPF1003
ROHM 1005 0402 100kΩ
Configuration
DC
Rated
No.
13
Item
L
Part Number
7G09B-330M
Vendor
Value Tolerance
Quantity
2
Reference
Resistance DC Current
mm
SAGAMI
10×9×10
33µH×2
±20%
52mΩmax. 2.0A max.
L9, L13, L31, L35
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
13/15
Technical Note
BD5427EFS
●Notes on Usage
1. About absolute maximum ratings
If an applied voltage or an operating temperature exceeds an absolute maximum rating, it may cause destruction of a
device. A result of destruction, whether it is short mode or open mode, is not predictable. Therefore, provide a physical
safety measure such as fuse, against a special mode that may violate conditions of absolute maximum ratings.
2. About power supply line
As return of current regenerated by back EMF of output coil happens, take steps such as putting capacitor between
power supply and GND as a electric pathway for the regenerated current. Be sure that there is no problem with each
property such as emptied capacity at lower temperature regarding electrolytic capacitor to decide capacity value. If the
connected power supply does not have sufficient current absorption capacity, regenerative current will cause the voltage
on the power supply line to rise, which combined with the product and its peripheral circuitry may exceed the absolute
maximum ratings. It is recommended to implement a physical safety measure such as the insertion of a voltage clamp
diode between the power supply and GND pins.
3. Potential of GND (11, 12, 33, 34, and 43 pins)
Potential of the GND terminal must be the lowest under any operating conditions.
4. About thermal design
Perform thermal design with sufficient margins, in consideration of maximum power dissipation Pd under actual operating
conditions. This product has an exposed frame on the back of the package, and it is assumed that the frame is used with
measures to improve efficiency of heat dissipation. In addition to front surface of board, provide a heat dissipation pattern
as widely as possible on the back also.
A class-D power amplifier has heat dissipation efficiency far higher than that of conventional analog power amplifier and
generates less heat. However, extra attention must be paid in thermal design so that a power dissipation Pdiss should
not exceed the maximum power dissipation Pd.
Tjmax - Ta
Tjmax: Maximum temperature junction = 150[℃]
Ta: Operating ambient temperature [℃]
θja: Package thermal resistance [℃/W]
Po: Output power [W]
Pd
W
Maximum power dissipation
θja
1
η
Pdiss PO -1
W
Power dissipation
η: Efficiency
5. About operations in strong electric field
Note that the device may malfunction in a strong electric field.
6. Thermal shutdown (TSD) circuit
This product is provided with a built-in thermal shutdown circuit. When the thermal shutdown circuit operates, the output
transistors are placed under open status. The thermal shutdown circuit is primarily intended to shut down the IC avoiding
thermal runaway under abnormal conditions with a chip temperature exceeding Tjmax = 150℃, and is not intended to
protect and secure an electrical appliance. Accordingly, do not use this circuit function to protect a customer's electrical
appliance.
7. About shorting between pins and installation failure
Be careful about direction and displacement of an LSI when installing it onto the board. Faulty installation may destroy
the LSI when the device is energized. In addition, a foreign matter getting in between LSI pins, pins and power supply,
and pins and GND may cause shorting and destruction of the LSI.
8. About power supply startup and shutdown
When starting up a power supply, be sure to place the MUTEX pin (pin 20) at “L” level. When shutting down a power
supply also, be sure to place the pin at “L” level. Those processes reduce pop noises generated upon turning on and off
the power supply. In addition, all power supply pins must be started up and shut down at the same time.
9. About WARNING output pin (pin 18) and ERROR output pin (pin 19)
A WARNING flag is output from the WARNING output pin upon operation of the high-temperature protection function and
under-voltage protection function. And an ERROR flag is output from the ERROR output pin upon operation of VCC/GND
shorting protection function and speaker DC voltage applying protection function. These flags are the function which the
condition of this product is shown in. The use which aimed at the protection except for this product is prohibition.
10. About N.C. pins (pins 2, 3, 4, 5, 21 and 22)
The N.C. (Non connection) pins are not connected with an internal circuit. Leave the pins open or connect them to GND.
www.rohm.com
2009.06 - Rev.A
14/15
© 2009 ROHM Co., Ltd. All rights reserved.
Technical Note
BD5427EFS
●Ordering part number
B D
5
4
2
7
E
F
S
-
E
2
Part No
BD
Part No.
5427
Package
EFS: HTSSOP-A44
Packaging and forming specification
E2: Embossed tape and reel
HTSSOP-A44
<Tape and Reel information>
18.5 0.1
(MAX 18.85 include BURR)
Tape
Embossed carrier tape (with dry pack)
1500pcs
+
−
6°
(6.0)
4°
4°
44
23
Quantity
E2
Direction
of feed
The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand
(
)
22
1
1PIN MARK
0.85
+0.05
0.17
-
0.03
S
0.08 S
0.8
+0.05
0.08 M
0.37
-
0.04
Direction of feed
1pin
Reel
Order quantity needs to be multiple of the minimum quantity.
(Unit : mm)
∗
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
2009.06 - Rev.A
15/15
Notice
N o t e s
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039
A
相关型号:
BD543-S
Power Bipolar Transistor, 8A I(C), 40V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin, PLASTIC, TO-220, FM-3
BOURNS
©2020 ICPDF网 联系我们和版权申明