BP5039A [ROHM]
AC / DC converter; AC / DC转换
| 型号： | BP5039A |
| 厂家： | 
ROHM |
| 描述： | AC / DC converter |
| 文件： | 总8页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BP5039-12 / BP5039-15 / BP5039A
Power Module
AC / DC converter
BP5039-12 / BP5039-15 / BP5039A
The BP5039-12, BP5039-15 and BP5039A are AC / DC converters which provide DC output from a commercial
power supply (100V AC). Using these modules enable simple, easy drive of microcomputers, LEDs, and many other
electronic components without using a transformer. They allow set PCBs to be kept compact and lightweight, with
extremely few attachments.
!Applications
Power supply circuits for vacuum cleaners, washing machines, refrigerators, electric carpets, electric rice cookers and
crock pots, irons, cordless telephones, air conditioners, air purifiers, humidifiers, dehumidifiers, illumination devices and
other small household appliance, as well as power supply circuits for gas, fire and smoke alarms, DC motors, sensors,
and other similar devices.
!Features
1) Elimination of a transformer enables compact, lightweight power supply boards.
2) Wide input voltage range.(80 to 120Vrms for AC voltage conversion.)
3) DC power supply can be easily configured, with few attachments.
4) Because no transformer is used, the power supply board is less vulnerable to splitting or cracking from impact or
shock.
5) Allow easy assemblage of components.
!List of the BP5039 series
Parameter
Power supply voltage
Output voltage
BP5039-12
113~170
12
BP5039-15
113~170
15
BP5039A
113~170
24
Unit
V
V
Output current
300
200
200
mA
!Absolute maximum ratings (Ta = 25°C)
Limits
Parameter
Symbol
Unit
BP5039-12
BP5039-15
170
BP5039A
170
Power supply voltage
Output current
V
IN
170
300
V
I
O
200
200
mA
°C
°C
Operating temperature range
Storage temperature range
Topr
Tstg
−20~+80
−25~+105
−25~+80
−25~+105
−20~+80
−25~+105
!Recommended operating conditions (Ta = 25°C)
Parameter
Symbol
Min.
113
Typ.
141
Max.
170
Unit
Power supply voltage
V
IN
V(DC)
BP5039-12 / BP5039-15 / BP5039A
Power Module
!Electrical characteristics (unless otherwise noted, Ta = 25°C)
BP5039-12
Parameter
Input voltage
Symbol
Min.
113
11
Typ.
141
12
Max.
170
13
Unit
V
Conditions
VIN
DC
V
O
V
V
V
V
V
V
V
IN = 141V, I
IN = 141V
IN = 113V~170V, I = 100mA
O
= 100mA
Output voltage
1
2
∗
I
O
0
−
300
+0.10
+0.20
0.15
−
mA
V
Output current
Vr
Vl
−0.10
−0.20
−
0.04
0.05
0.07
74
O
Line regulation
V
IN = 141V, I
IN = 141V, I
IN = 141V, I
O
O
O
= 0~100mA
= 100mA
= 300mA
Load regulation
Output ripple voltage
Conversion efficiency
∗
Vp
V
PP
η
65
%
∗
∗
1 Maximum output current varies depending on ambient temperature; please refer to derating curve.
2 Spike noise is not included in output ripple voltage.
BP5039-15
Parameter
Symbol
Min.
113
14.25
0
Typ.
141
15.0
−
Max.
170
15.75
200
+0.20
+0.20
0.15
−
Unit
V
Conditions
VIN
DC
Input voltage
1
2
∗
V
O
V
V
V
V
V
V
V
V
IN
IN
IN
IN
IN
IN
IN
=
=
=
=
=
=
=
141V
113V~170V, I = 100mA
Output voltage
I
O
mA
V
O
Output current
Vr
Vl
−0.20
−0.20
−
0.05
0.05
0.07
74
141V, I
141V, I
141V, I
141V, I
141V, I
O
O
O
O
O
=
=
=
=
=
0~100mA
100mA
200mA
200mA
200mA
Line regulation
∗
V
Load regulation
Vp
V
PP
Output ripple voltage
Conversion efficiency
Surface temperature rise
η
60
%
Tc
−
38
−
K
∗
∗
1 Maximum output current varies depending on ambient temperature; please refer to derating curve.
2 Spike noise is not included in output ripple voltage.
BA5039A
Parameter
Symbol
Min.
113
22
Typ.
141
24
Max.
170
26
Unit
V
Conditions
= 100mA
V
IN
DC
Input voltage
VO
V
V
IN
=
141V, I
141V
O
Output voltage
1
2
∗
I
O
0
−
200
+0.15
+0.50
−
mA
V
Output current
V
IN
IN
=
=
Vr
Vl
−0.15
−0.50
−
0.04
0.25
0.07
82
V
113V~170V, I
O
=
100mA
Line regulation
V
V
V
V
IN
IN
IN
=
=
=
141V, I
141V, I
141V, I
O
O
O
= 0~+100mA
Load regulation
Output ripple voltage
Conversion efficiency
∗
Vp
V
PP
=
=
100mA
200mA
η
70
−
%
∗
∗
1 Maximum output current varies depending on ambient temperature; please refer to derating curve.
2 Spike noise is not included in output ripple voltage.
Spike noise
Ripple
BP5039-12 / BP5039-15 / BP5039A
Power Module
!Pin descriptions
Pin No.
Pin name
1
3
V
OUT
COIL
5
COIL
7
COMMON
N.C.
10
12
V
IN
Pins 2, 4, 6, 8, 9, 11 are removed.
!Measurement circuit
BP5039-12
BP5039-12
12
12
12
10
10
10
7
5
3
1
1
1
A
A
A
1.0mH
V
IN
C10-FR-102
(MITSUMI)
V
33µF / 200V
220µF / 50V
Fig.1
BP5039-15
BP5039-15
7
5
3
1mH
C10-FR-102
(MITSUMI)
V
IN
V
33µF / 200V
220µF / 50V
Fig.2
BP5039A
BP5039A
7
5
3
1.5mH
C10-FR-152
(MITSUMI)
VIN
V
100µF / 50V
33µF / 200V
Fig.3
∗Use a low-impedance product for switching power supplies for the output capacitor.
BP5039-12 / BP5039-15 / BP5039A
Power Module
!Application example
BP5039A
12
10
7
5
3
1
OUTPUT
Fig.4
!Operation notes
(1) The output current needs to be reduced as the ambient temperature rises. (Refer to derating curve.)
(2) Over current and shorted circuit
If there is any danger of the load being shorted or over current being produced, always use a protective device such
as a fuse.
(3) Insulation
These products are not insulated on the primary and secondary sides, and there is a danger of electrical shock
if they are touched.
(4) Avoid subjecting these products to strong impact.
(5) Lead pins should be securely soldered. if lead pins are not securely connected, irregular voltages could be produced,
causing breakdowns and damage.
(6) The parts arrangement should be made as shown in the following figure.
COIL
AC / DC Converter
Output Capacitor
Input Capacitor
(7) Soldering
It should be performed within 10 seconds at 260°C.
(8) Soldering iron
The temperature of the tip of the soldering iron should be less than 310°C, and the soldering should be performed
within 3 seconds.
(9) Input voltage
Be careful so that the input voltage should not exceed the maximum input voltage. Further, since operation will be
allowed even at the low voltage (about 40V), if operation at the low voltage is not required, cope with the situation by
using an externally installed circuit.
(10) Operating temperature
The operating temperature should necessarily be within the range of the temperature designated in the specification.
Since the surface temperature increase of these products will change depending on the use environment, be
minded to actually measure the temperature each time.
BP5039-12 / BP5039-15 / BP5039A
Power Module
(11) Smoothing capacitor for input pin
The capacitor should have a withstand voltage of at least 200V.
(12) Smoothing capacitor for output pin
The capacitor should have a withstand voltage of at least 25V. Capacitors designed for switching power supplies
are especially suitable. In case that the general capacitors are used, be minded to use those of which allowable
ripple current is 0.25Arms or more.
(13) Connections with other devices
Devices using the products should not be connected to other devices. If connected, insulation should be provided.
!Electrical characteristic curves
BP5039-12
350
300
250
200
150
100
40
35
30
25
20
15
13
12.5
12
10
5
11.5
11
50
0
0
−20
0
20
40
60
0
50 100 150 200 250 300 350
OUTPUT CURRENT : I (mA)
80
100
0
50 100 150 200 250 300 350
OUTPUT CURRENT : I (mA)
AMBIENT TEMPERATURE : Ta (°C)
O
O
Fig.5 Derating curve
Fig.6 Surface temperature rise
Fig.7 Output characteristic
100
80
60
40
20
0
0
50 100 150 200 250 300 350
OUTPUT CURRENT : I (mA)
O
Fig.8 Conversion efficiency
BP5039-12 / BP5039-15 / BP5039A
Power Module
BP5039-15
250
50
40
30
20
16
14
12
10
8
200
150
100
50
6
4
2
0
10
0
0
−20
0
20
40
60
80
0
50
100
150
(mA)
200
0
50
100
150
(mA)
200
AMBIENT TEMPERATURE : Ta (°C)
OUTPUT CURRENT : I
O
OUTPUT CURRENT : I
O
Fig.9 Derating curve
Fig.11 Output characteristic
Fig.10 Surface temperature rise
100
90
80
70
60
50
40
30
20
10
0
0
50
100
150
(mA)
200
OUTPUT CURRENT : I
O
Fig.12 Conversion efficiency
BP5039A
300
45
40
35
30
25
20
15
10
26
25.5
25
250
200
150
100
50
24.5
24
23.5
23
22.5
22
5
0
0
−20
0
20
40
60
80
100
0
50
100
150
200
250
0
50
100
150
200
250
AMBIENT TEMPERATURE : Ta (°C)
OUTPUT CURRENT : I
O
(mA)
OUTPUT CURRENT : I
O
(mA)
Fig.13 Derating curve
Fig.14 Surface temperature rise
Fig.15 Output characteristic
BP5039-12 / BP5039-15 / BP5039A
Power Module
100.00
95.00
90.00
85.00
80.00
75.00
70.00
65.00
60.00
0
50
100
150
200
250
OUTPUT CURRENT : I
O
(mA)
Fig.16 Conversion efficiency
!External dimensions (Units : mm)
35.0Max.
9.1Max.
1
3
5
7
10
12
7.62
1.3 0.2
0.25 0.05
4.85Max.
5.08
0.5 0.1
27.94
4.25Max.
3.6Max.
SIP12
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
相关型号：
©2020 ICPDF网 联系我们和版权申明