BP5061_10 [ROHM]

Non-Isolated AC/DC Converter; 非隔离式AC / DC转换器


型号：	BP5061_10
厂家：	ROHM
描述：	Non-Isolated AC/DC Converter 非隔离式AC / DC转换器转换器
文件：	总4页 (文件大小：1018K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Data Sheet

100VAC Input/−12VDC (300mA) Output

Non-Isolated AC/DC Converter

BP5061

Absolute Maximum Ratings

Dimensions (Unit : mm)

9.1MAX.

Parameter

Input voltage

Symbol

Limits

−170

Unit

35.0MAX.

Output current

300

mApk

ESD endurance

Vsurge

Topr

Tstg

Operating temperature range

Storage temperature range

−25 to +80

−25 to +105

°C

0.25±0.0

0.5±0.1

5.08±0.2

2.54�11=27.94

1.3±0.2

7.62 0.3

4.85MAX.

4.25MAX.

3.6MAX

Electrical Characteristics

Parameter

Input voltage range

Output voltage

Output current

Line regulation

Load regulation

Output ripple voltage

Power conversion efficiency

Symbol Min.

Typ.

−141

−12.0

−

0.04

0.05

0.07

Max.

−170

−13.0

300

0.15

−

Conditions

DC (80 to 120VAC)

Vi=−141V, Io=200mA

Vi=−141V

Vi=−113V to −170V, Io=200mA

Vi=−141V, Io=0 to 200mA

Unit

Derating Curve

−113

−11.0

Derating Curve

350

300

250

200

∗1

−

150

Operation Range

100

Vp-p

Vi=−141V, Io=200mA

Vi=−141V, Io=300mA

∗2

-30 -20 -10

0 10 20 30 40 50 60 70 80 90

Ambient Temperature Ta(°C)

∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.

∗2 Spike noise is not included in output ripple voltage.

Conversion Efficiency

(Ta=25°C, Vi=−141V)

100

Application Circuit

Pin No.

Function

Output terminal Vo(−12V)

Not used

Coil connect

Not used

Coil connect

Not used

COMMON

Not used

N.C.

Not used

Input voltage Vi(−141VDC

)

BP5061

Please note that pin No.12

side is input.

50 100 150 200 250 300

Output Current Io(mA)

12 10

FUSE

Output

−12V

10Ω1/4W

Load Regulation

1mH

Load Regulation

(Ta=25°C, Vi=−141V)

Input

AC100V

50Hz/60Hz

−

ZNR

220V

13.0

0.1µF

100µF/50V

33µF/200V

12.5

12.0

11.5

11.0

Be sure to use fuse for safety.

Please verify operation and characteristics in the customer's circuit before actual usage.

Ensure that the load current does not exceed the maximum rating.

50 100 150 200 250 300

Output Current Io(mA)

External Component Specifications

FUSE: Fuse

Use a quick-acting fuse of 1A

Surface Temperature Increase

C1: Input smoothing

capacitor

Capacitance : 22 to 100µF Rated voltage : 200V or higher

Ripple current is 0.13Arms or greater.

Surface Temperature Increase

(Ta=25°C, Vi=−141V)

Capacitance : 0.1 to 0.22µF Rated voltage : 200V or higher

Use a film or ceramic capacitor. Evaluate under actual

conditions.

C2: Noise reduction

capacitor

Capacitance : 100 to 470µF Rated voltage : 25V or higher,

ECR is 0.4Ω max. Ripple current is 0.25Arms or higher.

Evaluate under actual operating conditions.

C3: Output smoothing

capacitor

50 100 150 200 250 300 350

Output Current Io(mA)

D1: Rectifier diode

In the absolute maximum ratings, the reverse peak voltage should be

400V or higher, the average rectifying current should be 1A or higher,

and the peak surge current should be 20A or higher.

(Full-wave rectification can be used.)

Coil for switching regulator. The inductance should be 1mH,

the rated direct current should be 0.6A or greater in order to prevent

overheating or abnormal oscillation.

L1: Choke coil

10 to 22Ω 1/4W

Determine the ideal value through actual testing.

R1: Noise reduction

resistor

A varistor is required to protect against lightning surges and

static electricity.

ZNR: Varistor

www.rohm.com

2010.01 - Rev.A

1/1

Notice

N o t e s

No copying or reproduction of this document, in part or in whole, is permitted without the

consent of ROHM Co.,Ltd.

The content speciﬁed herein is subject to change for improvement without notice.

The content speciﬁed herein is for the purpose of introducing ROHM's products (hereinafter

"Products"). If you wish to use any such Product, please be sure to refer to the speciﬁcations,

which can be obtained from ROHM upon request.

Examples of application circuits, circuit constants and any other information contained herein

illustrate the standard usage and operations of the Products. The peripheral conditions must

be taken into account when designing circuits for mass production.

Great care was taken in ensuring the accuracy of the information speciﬁed in this document.

However, should you incur any damage arising from any inaccuracy or misprint of such

information, ROHM shall bear no responsibility for such damage.

The technical information speciﬁed herein is intended only to show the typical functions of and

examples of application circuits for the Products. ROHM does not grant you, explicitly or

implicitly, any license to use or exercise intellectual property or other rights held by ROHM and

other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the

use of such technical information.

The Products speciﬁed in this document are intended to be used with general-use electronic

equipment or devices (such as audio visual equipment, ofﬁce-automation equipment, commu-

nication devices, electronic appliances and amusement devices).

The Products speciﬁed in this document are not designed to be radiation tolerant.

While ROHM always makes efforts to enhance the quality and reliability of its Products, a

Product may fail or malfunction for a variety of reasons.

Please be sure to implement in your equipment using the Products safety measures to guard

against the possibility of physical injury, ﬁre or any other damage caused in the event of the

failure of any Product, such as derating, redundancy, ﬁre control and fail-safe designs. ROHM

shall bear no responsibility whatsoever for your use of any Product outside of the prescribed

scope or not in accordance with the instruction manual.

The Products are not designed or manufactured to be used with any equipment, device or

system which requires an extremely high level of reliability the failure or malfunction of which

may result in a direct threat to human life or create a risk of human injury (such as a medical

instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-

controller or other safety device). ROHM shall bear no responsibility in any way for use of any

of the Products for the above special purposes. If a Product is intended to be used for any

such special purpose, please contact a ROHM sales representative before purchasing.

If you intend to export or ship overseas any Product or technology speciﬁed herein that may

be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to

obtain a license or permit under the Law.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact us.

ROHM Customer Support System

http://www.rohm.com/contact/

www.rohm.com

R1010

相关型号：