DTC143ZU3 [ROHM]

本产品是电阻内置型晶体管。由于内置了偏压用电阻,因此输入侧无需外接电阻即可构成逆变电路。;
DTC143ZU3
型号: DTC143ZU3
厂家: ROHM    ROHM
描述:

本产品是电阻内置型晶体管。由于内置了偏压用电阻,因此输入侧无需外接电阻即可构成逆变电路。

小信号双极晶体管
文件: 总3页 (文件大小:72K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Transistors  
DTC143ZEB  
100mA / 50V Digital transistors  
(with built-in resistors)  
DTC143ZEB  
zApplications  
zDimensions (Unit : mm)  
Inverter, Interface, Driver  
EMT3F  
1.6  
0.7  
zFeatures  
0.26  
(3)  
1) Built-in bias resistors enable the configuration of  
an inverter circuit without connecting external  
input resistors (see equivalent circuit).  
2) The bias resistors consist of thin-film resistors  
with complete isolation to allow negative biasing  
of the input. They also have the advantage of  
almost completely eliminating parasitic effects.  
3) Only the on/off conditions need to be set for  
operation, making the device design easy.  
(1)  
0.5 0.5  
1.0  
(2)  
0.13  
Each lead has same dimensions  
(1) IN  
(2) GND  
(3) OUT  
Abbreviated symbol : E23  
zStructure  
zEquivalent circuit  
NPN silicon epitaxial planar transistor type  
(Resistor built-in)  
OUT  
R1  
IN  
R2  
zPackaging specifications  
GND  
OUT  
Package  
EMT3F  
Taping  
TL  
Packaging type  
Code  
IN  
Part No.  
Basic ordering unit (pieces)  
3000  
GND  
DTC143ZEB  
R1=4.7k, R2=47kΩ  
zAbsolute maximum ratings (Ta=25°C)  
Parameter  
Symbol  
Limits  
Unit  
Supply voltage  
Input voltage  
V
CC  
IN  
50  
V
V
V
5 to +30  
Collector current  
Output current  
Ic(max) 1  
100  
100  
mA  
mA  
mW  
°C  
Io  
2  
Power dissipation  
Junction temperature  
P
D
150  
Tj  
Tstg  
150  
Storage temperature  
55 to +150  
°C  
1 Characteristics of built-in transistor  
2 Each terminal mounted on a recommended land  
1/2  
Transistors  
DTC143ZEB  
zElectrical characteristics (Ta=25°C)  
Parameter  
Symbol Min. Typ. Max. Unit  
Conditions  
V
I(off)  
1.3  
500  
mV  
V
V
CC=5V, I  
=0.3V, I  
/I =5mA/0.25mA  
O
=100µA  
Input voltage  
V
I(on)  
VO  
O
=5mA  
Output voltage  
Input current  
V
O(on)  
100 300  
mV  
mA  
nA  
I
O I  
V
I
=5V  
I
I
1.8  
500  
Output current  
DC current gain  
Transition frequency  
Input resistance  
Resistance ratio  
I
O(off)  
V
V
V
CC=50V, V =0V  
I
G
I
80  
O
=5V, I  
O
=10mA  
f
T
250  
MHz  
kΩ  
CE=10V, I  
E
= −5mA, f=100MHz  
R
1
3.29 4.7 6.11  
10 12  
R2  
/R1  
8
Characteristics of built-in transistor  
zElectrical characteristic curves  
100  
10m  
5m  
1k  
V
CC=5V  
V
O
=0.3V  
V
O
=5V  
500  
50  
2m  
1m  
Ta=100°C  
25°C  
40°C  
20  
10  
200  
100  
500µ  
200µ  
100µ  
50µ  
Ta=100°C  
25°C  
40°C  
5
2
50  
Ta= −40°C  
25°C  
20  
10  
5
100°C  
1
20µ  
10µ  
500m  
5µ  
200m  
100m  
2
1
2µ  
1µ  
0
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
100µ 200µ  
500µ 1m  
2m  
5m 10m 20m  
50m 100m  
100µ 200µ  
500µ 1m  
2m  
5m 10m 20m  
50m 100m  
INPUT VOLTAGE : VI(off) (V)  
OUTPUT CURRENT : I (A)  
O
OUTPUT CURRENT : I (A)  
O
Fig.2 Output current vs. input voltage  
(OFF characteristics)  
Fig.1 Input voltage vs. output current  
(ON characteristics)  
Fig.3 DC current gain vs. output  
current  
1
lO  
/lI  
=20  
500m  
Ta=100°C  
25°C  
40°C  
200m  
100m  
50m  
20m  
10m  
5m  
2m  
1m  
100µ 200µ  
500µ 1m  
2m  
5m 10m 20m  
50m 100m  
OUTPUT CURRENT : I (A)  
O
Fig.4 Output voltage vs. output  
current  
2/2  
Appendix  
Notes  
No technical content pages of this document may be reproduced in any form or transmitted by any  
means without prior permission of ROHM CO.,LTD.  
The contents described herein are subject to change without notice. The specifications for the  
product described in this document are for reference only. Upon actual use, therefore, please request  
that specifications to be separately delivered.  
Application circuit diagrams and circuit constants contained herein are shown as examples of standard  
use and operation. Please pay careful attention to the peripheral conditions when designing circuits  
and deciding upon circuit constants in the set.  
Any data, including, but not limited to application circuit diagrams information, described herein  
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM  
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any  
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of  
whatsoever nature in the event of any such infringement, or arising from or connected with or related  
to the use of such devices.  
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or  
otherwise dispose of the same, no express or implied right or license to practice or commercially  
exploit any intellectual property rights or other proprietary rights owned or controlled by  
ROHM CO., LTD. is granted to any such buyer.  
Products listed in this document are no antiradiation design.  
The products listed in this document are designed to be used with ordinary electronic equipment or devices  
(such as audio visual equipment, office-automation equipment, communications devices, electrical  
appliances and electronic toys).  
Should you intend to use these products with equipment or devices which require an extremely high level  
of reliability and the malfunction of which would directly endanger human life (such as medical  
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers  
and other safety devices), please be sure to consult with our sales representative in advance.  
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance  
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow  
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in  
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM  
cannot be held responsible for any damages arising from the use of the products under conditions out of the  
range of the specifications or due to non-compliance with the NOTES specified in this catalog.  
Thank you for your accessing to ROHM product informations.  
More detail product informations and catalogs are available, please contact your nearest sales office.  
THE AMERICAS / EUPOPE / ASIA / JAPAN  
ROHM Customer Support System  
Contact us : webmaster@ rohm.co.jp  
www.rohm.com  
TEL : +81-75-311-2121  
FAX : +81-75-315-0172  
Copyright © 2007 ROHM CO.,LTD.  
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan  
Appendix1-Rev2.0  

相关型号:

DTC143ZU3HZG

本产品是电阻内置型晶体管。由于内置了偏压用电阻,因此输入侧无需外接电阻即可构成逆变电路。是符合AEC-Q101标准的高可靠性车载品。
ROHM

DTC143ZU3T106

Small Signal Bipolar Transistor,
ROHM

DTC143ZUA

Digital transistors (built-in resistors)
ROHM

DTC143ZUA

Digital Transistors (Built-in Resistors)
SECOS

DTC143ZUA

SOT-323 DIGITAL TRANSISTORS TRANSISTOR (NPN)
RECTRON

DTC143ZUA

Digital Transistors
MCC

DTC143ZUA

PNP Small Signal Transistor
TSC

DTC143ZUA-HF

Small Signal Bipolar Transistor,
COMCHIP

DTC143ZUA-TP

Small Signal Bipolar Transistor, 0.1A I(C), 1-Element, NPN, Silicon, ROHS COMPLIANT, PLASTIC, PACKAGE-3
MCC

DTC143ZUA-TP-HF

Small Signal Bipolar Transistor, 1-Element, NPN, Silicon, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-3
MCC

DTC143ZUAT106

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, SC-70, 3 PIN
ROHM

DTC143ZUAT107

Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon,
ROHM